Canon IRC1022 Service Manual

SERVICE
MANUAL

Color
imageRUNNER

C1030/C1022
Series

COPYRIGHT © 2010 CANON INC. CANON Color imageRUNNER C1030/C1022 Series REV. 0 PRINTED IN U.S.A.

October 29, 2010

Rev. 0

Application

This manual has been issued by Canon Inc. for qualified persons to learn technical theory, insta llati on, ma intenance, and repair
of products. This manual covers all localities where the products are sold. For this reason, there may be information in this
manual that does not apply to your locality.

Corrections

This manual may contain technical inaccuracies or typographical errors due to improvements or changes in products. When
changes occur in applicable products or in the contents of this manual, Canon will release technical information as the need
arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new edition
of this manual.

The following paragraph does not apply to any countries where such provisions are inconsistent with local law.

Trademarks

The product names and company names used in this manual are the registered trademarks of the individual companies.

Copyright

This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be copied, reproduced or
translated into another language, in whole or in part, without the written consent of Canon Inc.

COPYRIGHT © 2001 CANON INC.

Printed in Japan

Caution

Use of this manual should be strictly supervised to avoid disclosure of confidential information.

Symbols Used

This documentation uses the following symbols to indicate special information:

Symbol Description

Indicates an item of a non-specific nature, possibly classified as Note, Caution, or Warning.

Indicates an item requiring care to avoid electric shocks.

Indicates an item requiring care to avoid combustion (fire).

Indicates an item prohibiting disassembly to avoid electric shocks or problems.

Indicates an item requiring disconnection of the power plug from the electric outlet.

Indicates an item intended to provide notes assisting the understanding of the topic in question.

Memo

Introduction

REF.

Indicates an item of reference assisting the understanding of the topic in question.

Provides a description of a service mode.

Provides a description of the nature of an error indication.

Introduction

The following rules apply throughout this Service Manual:

1. Each chapter contains sections explaining the purpose of specific functions and the relationship between electrical and mechanical systems with refer­ence to the timing of operation.

In the diagrams, represents the path of mechanical drive; where a signal name accompanies the symbol , the arrow indicates the
direction of the electric signal.
The expression "turn on the power" m eans flipping on the po wer switch, closing the front door, and closing the delivery unit door, which results in
supplying the machine with power.

2. In the digital circuits, '1'is used to indicate that the voltage level of a given signal is "High", while '0' is used to indicate "Low".(The voltage value, how­ever, differs from circuit to circuit.) In addition, the asterisk (*) as in "DRMD*" indicates that the DRMD signal goes on when '0'.
In practically all cases, the internal mechanisms of a microprocessor cannot be checked in the fi eld. Therefore, the operations of the microprocessors
used in the machines are not discussed: they are explained in terms of from sensors to the input of the DC controller PCB and from the output of the
DC controller PCB to the loads.

The descriptions in this Service Manual are subject to change without notice for product improvement or other purposes, and major changes will be com­municated in the form of Service Information bulletins.
All service persons are expected to have a good understanding of the contents of this Service Manual and all relevant Service Information bulletins and be
able to identify and isolate faults in the machine."

Contents

Contents

Chapter 1 Introduction

1.1 System Construction ..................................................................................................................................1- 1

1.1.1 System Configuration of Pickup/Delivery Options...................................................................................................1- 1

1.1.2 System Configuration of Print/Send Options...........................................................................................................1- 2

1.1.3 System Configuration of Print/Send Options...........................................................................................................1- 2

1.1.4 Functions of Print/Send Options..............................................................................................................................1- 3

1.1.5 Functions of Print/Send Options..............................................................................................................................1- 5

1.2 Product Specifications................................................................................................................................1- 6

1.2.1 Names of Parts........................................................................ ................................................................................1- 6

1.2.1.1 External View...........................................................................................................................................................................1- 6

1.2.1.2 External View...........................................................................................................................................................................1- 7

1.2.1.3 Cross Section...........................................................................................................................................................................1- 8

1.2.2 Using the Machine ...................................................................................................................................................1- 9

1.2.2.1 Turning on the Power Switch................................................................................................................................................... 1- 9

1.2.2.2 Control Panel ......................................................................................................................................................................... 1- 10

1.2.3 User Mode Items................................... .......................................... ......................................................................1- 11

1.2.3.1 Overview................................................................................................................................................................................1- 11

1.2.3.2 Overview................................................................................................................................................................................1- 11

1.2.3.3 Paper Settings ....................................................................................................................................................................... 1- 11

1.2.3.4 Paper Settings ....................................................................................................................................................................... 1- 11

1.2.3.5 Volume Settings..................................................................................................................................................................... 1- 12

1.2.3.6 Volume Settings..................................................................................................................................................................... 1- 13

1.2.3.7 Common Settings .................................................................................................................................................................. 1- 14

1.2.3.8 Common Settings .................................................................................................................................................................. 1- 15

1.2.3.9 Communications Settings *3.................................................................................................................................................. 1- 16

1.2.3.10 Communications Settings ................................................................................................................................................... 1- 18

1.2.3.11 Address Book Settings......................................................................................................................................................... 1- 20

1.2.3.12 Address Book Settings......................................................................................................................................................... 1- 22

1.2.3.13 Printer Settings.....................................................................................................................................................................1- 24

1.2.3.14 Printer Settings.....................................................................................................................................................................1- 26

1.2.3.15 Timer Settings......................................................................................................................................................................1- 30

1.2.3.16 Timer Settings......................................................................................................................................................................1- 31

1.2.3.17 Adjustment/Cleaning............................................................................................................................................................ 1- 32

1.2.3.18 Adjustment/Cleaning............................................................................................................................................................ 1- 32

1.2.3.19 Report Settings .................................................................................................................................................................... 1- 32

1.2.3.20 Report Settings .................................................................................................................................................................... 1- 34

1.2.3.21 System Management Set..................................................................................................................................................... 1- 35

1.2.3.22 System Management Settings ............................................................................................................................................. 1- 43

1.2.4 Maintenance by the User.......................................................................................................................................1- 53

1.2.4.1 Cleaning................................................................................................................................................................................. 1- 53

1.2.4.2 Cleaning................................................................................................................................................................................. 1- 56

1.2.5 Safety ....................................................................................................................................................................1- 59

1.2.5.1 Points to note at disassembly/assembly................................................................................................................................1- 59

1.2.5.2 CDRH Regulations................................................................................................................................................................. 1- 59

1.2.5.3 Safety of the Laser Light........................................................................................................................................................1- 59

1.2.5.4 Handling the Laser Unit ......................................................................................................................................................... 1- 59

1.2.5.5 Safety of Toner ...................................................................................................................................................................... 1- 60

1.2.5.6 Notes when handling a battery .............................................................................................................................................. 1- 60

1.2.6 Product Specifications...........................................................................................................................................1- 61

1.2.6.1 Main Body Specifications....................................................................................................................................................... 1- 61

1.2.6.2 Main Body Specifications....................................................................................................................................................... 1- 62

1.2.6.3 ADF Specifications................................................................................................................................................................. 1- 64

1.2.6.4 ADF Specifications................................................................................................................................................................. 1- 65

1.2.6.5 FAX Specifications................................................................................................................................................................. 1- 66

Contents

1.2.6.6 FAX Specifications................................................................................................................................................................. 1- 67

1.2.7 Function List............................. .......................................... ....................................................................................1- 68

1.2.7.1 Print Speed ............................................................................................................................................................................ 1- 68

1.2.7.2 Print Speed ............................................................................................................................................................................ 1- 69

1.2.7.3 Paper Type ............................................................................................................................................................................ 1- 70

Chapter 2 Installation

2.1 Making Pre-Checks....................................................................................................................................2- 1

2.1.1 Checking Installation Environment...........................................................................................................................2- 1

2.1.2 Points to Note Before Installation....................................................................................................... ... ...................2- 1

2.1.3 Checking Contents.................................... .. ... ................................................ ... .. .....................................................2- 2

2.2 Unpacking and Installation .........................................................................................................................2- 3

2.2.1 Unpacking.............................................................................................................................................................. ..2- 3

2.2.2 Installation................................................................................................................................................................2- 4

2.2.3 Installing Others.......................................................................................................................................................2- 5

2.2.4 Securing Product ............................................................................................................................... ... ...................2- 5

2.2.5 Cassette Settings.....................................................................................................................................................2- 6

2.2.6 Points to Note When Turning OFF Host Machine............................................................................................... ... ..2- 6

2.2.7 Connecting Cables...................................................................................................................................................2- 6

2.2.8 Auto Gradation Adjustment................................................................................................................................. .....2- 6

2.3 Checking the Connection to the Network...................................................................................................2- 7

2.3.1 Setting Up the Network..................................... .......................................... ....................................... ......................2- 7

2.3.2 Procedure for Ping Operation....................................................................................................... ...........................2- 7

2.3.3 Checking with Remote Host Address ......................................................................................................................2- 7

2.3.4 Troubleshooting Network Connection......................................................................................................................2- 7

2.3.5 Checking with Loopback Address.................................................................................................................. ..........2- 8

2.3.6 Checking with Local Host Address ..........................................................................................................................2- 8

2.4 Checking the Images/Operations...............................................................................................................2- 8

2.4.1 Checking Image Operation............................ ... ... ............................................... ... ... ......................... ... ...................2- 8

2.5 Installing the Card Reader.......................................................................................................................... 2- 8

2.5.1 Notice At Installation........................ ................................................ ... .. ...................................................................2- 8

2.5.2 Checking the Contents................................................................................... ... .......................................................2- 8

2.5.3 Turning OFF the Power of the Host Machine ............................................................................................. .............2- 9

2.5.4 Installation Procedure..............................................................................................................................................2- 9

2.5.5 Card ID Registration..............................................................................................................................................2- 10

2.5.6 Installation Procedure in the imageWARE Accounting Manager (hereinafter referred to iWAM) Environment.....2- 12

2.6 Installing the Hand Set .............................................................................................................................2- 12

2.6.1 Points to Note At Installation..................................................................................................................................2- 12

2.6.2 Checking the Contents................................................................................... ... .....................................................2- 12

2.6.3 Turning OFF the Power of the Host Machine ........................................................................................................2- 12

2.6.4 Installation Procedure............................................................................................................................................2- 12

2.7 Installing the Memory ...............................................................................................................................2- 13

2.7.1 Checking the Contents................................................................................... ... .....................................................2- 13

2.7.2 Checking Before Memory Expansion.....................................................................................................................2- 14

2.7.3 Turning OFF the Power of the Host Machine ........................................................................................................2- 14

2.7.4 Installation Procedure............................................................................................................................................2- 14

2.7.5 Checking After Memory Expansion........................................................................................................................2- 14

Chapter 3 Basic Operation

3.1 Construction ...............................................................................................................................................3- 1

3.1.1 Functional Configuration.......................................................................................................................... ................3- 1

3.1.2 Connecting the Main PCBs................................................................................................................................. ... ..3- 2

3.2 Basic Sequence ......................................................................................................................................... 3- 3

3.2.1 Basic Sequence of Operation........................... ................................................ .. ... ............................ ......................3- 3

Contents

3.2.2 Power-On Sequence............................. ... .............................................................................................................. .3- 4

Chapter 4 Main Controller

4.1 Overview/Configuration ..............................................................................................................................4- 1

4.1.1 Overview................................................................................................................................................................. .4- 1

4.1.2 Configurations/functions..........................................................................................................................................4- 2

4.2 Set-Up Sequence .. ... ....................................... ... ... ... .... ... ....................................... ... ... ... ...........................4- 4

4.2.1 Overview................................................................................................................................................................. .4- 4

4.2.2 Startup Sequence....................................................................................................................................................4- 5

4.3 Image Processing.......................................................................................................................................4- 6

4.3.1 Overview of the Image Flow............................................................................................................................. .......4- 6

4.3.2 Construction of the Image Processing Module........................................................................................................4- 6

4.3.3 Reader Unit Input Image Processing...................................................................................................................... .4- 7

4.3.4 Compression/ Extesion/ Editing Block.....................................................................................................................4- 7

4.3.5 Printer unit Output Image Processing......................................................................................................... .............4- 8

4.4 Image Data Flow ........................................................................................................................................4- 9

4.4.1 Flow of Image Data According to Copy Functions ................................ .......................................... ........................4- 9

4.4.2 Flow of Image Data for the SEND Function ..........................................................................................................4- 10

4.4.3 Flow of Image Data for the Fax Transmission.......................................................................................................4- 10

4.4.4 Flow of Image Data for the Fax Reception Function .............................................................................................4- 11

4.4.5 Flow of Image Data for the PDL Function .............................................................................................................4- 11

4.5 Parts Replacement Procedure .................................................................................................................4- 12

4.5.1 Main Controller PCB..............................................................................................................................................4- 12

4.5.1.1 Before Removing the Main Controller PCB ........................................................................................................................... 4- 12

4.5.1.2 Removing the Main Controller PCB....................................................................................................................................... 4- 12

4.5.1.3 Procedure after Replacing the Main Controller PCB ............................................................................................................. 4- 12

Chapter 5 Original Exposure System

5.1 Basic Construction......................................................................................................................................5- 1

5.1.1 Overview................................................................................................................................................................. .5- 1

5.1.2 Major Components......................................... ... ............................................... ... ......................... ... ........................5- 1

5.2 Basic Sequence..........................................................................................................................................5- 3

5.2.1 Basic Sequence of Operation at Power-on ......................................................... ... .................................................5- 3

5.2.2 Basic Sequence of Operation in Response to a Press on the Start Key (book)......................................................5- 4

5.2.3 Basic Sequence of Operation in Response to a Press on the Start Key (book)......................................................5- 5

5.3 Various Control...........................................................................................................................................5- 6

5.3.1 Lamp Control...................................................................................................................................... .....................5- 6

5.3.1.1 Overview..................................................................................................................................................................................5- 6

5.3.2 Enlargement/Reduction................................................................................................................................. ..........5- 7

5.3.2.1 Overview..................................................................................................................................................................................5- 7

5.3.3 Detecting the Size of Originals.............................................................................................................. ..................5- 7

5.3.3.1 Overview..................................................................................................................................................................................5- 7

5.3.4 Dirt Sensor Control.......................................................................................................................... ........................5- 8

5.3.4.1 Overview..................................................................................................................................................................................5- 8

5.3.4.2 Stream Reading Position Shift................................................................................................................................................. 5- 8

5.4 Parts Replacement Procedure ...................................................................................................................5- 9

5.4.1 ADF Unit + Reader Unit.............................................................................................................................. .............5- 9

5.4.1.1 Before Removing the ADF Unit + Reader Unit ........................................................................................................................5- 9

5.4.1.2 Removing the ADF Unit + Reader Unit.................................................................................................................................... 5- 9

5.4.1.3 Procedure after Replacing the ADF Unit................................................................................................................................ 5- 11

5.4.1.4 Procedure after Replacing the Reader Unit........................................................................................................................... 5- 11

5.4.2 Reader Unit ................................................................................................. ..........................................................5- 11

5.4.2.1 Before Removing the Reader Unit......................................................................................................................................... 5- 11

5.4.2.2 Removing the Reader Unit.....................................................................................................................................................5- 11

5.4.2.3 Procedure after Replacing the Reader Unit........................................................................................................................... 5- 12

Contents

Chapter 6 Original Feeding System

6.1 Basic Construction .....................................................................................................................................6- 1

6.1.1 Overview........................................................................................................................... ... ....................................6- 1

6.2 Basic Operation..........................................................................................................................................6- 3

6.2.1 Operation Mode.......................................................................................................................................................6- 3

6.2.2 Document Size Detection ........................................................................................................................... .............6- 5

6.3 Detection Jams.... .... ... ... ....................................... ... ... ... .... ... ....................................... ... ............................6- 6

6.3.1 Overview........................................................................................................................... ... ....................................6- 6

6.4 ADF/DADF .................................................................................................................................................6- 7

6.4.1 ADF/DADF...............................................................................................................................................................6- 7

6.4.1.1 Removing the ADF unit................................................................................................................................................... ......... 6- 7

6.4.1.2 Procedure after Replacing the ADF Unit.................................................................................................................................. 6- 8

6.4.2 Pickup Feed Unit....................................... ............................................... ... ... ............................ ..............................6- 8

6.4.2.1 Removing the ADF Pickup Feed Unit ...................................................................................................................................... 6- 8

6.4.3 Pick-up Roller........................................................................ .................................................................................6- 10

6.4.3.1 Removing the ADF Pickup Roller .......................................................................................................................................... 6- 10

6.4.4 Separation Roller............................. ................................................ ... .. .................................................................6- 11

6.4.4.1 Removing the ADF Separation Roller....................................................................................................................................6- 11

6.4.5 Pick-up Motor....................................................... ... ...............................................................................................6- 12

6.4.5.1 Before Removing the ADF Pickup Motor...............................................................................................................................6- 12

6.4.5.2 Removing the ADF Pickup Motor........................................................................................................................................... 6- 12

6.4.6 Pick-up Solenoid..................................................... ............................................... ... ... ..........................................6- 13

6.4.6.1 Before Removing the ADF Pickup Solenoid .......................................................................................................................... 6- 13

6.4.6.2 Removing the ADF Pickup Solenoid......................................................................................................................................6- 13

6.4.7 Separation Pad........................ .......................................... ....................................................................................6- 14

6.4.7.1 Removing the ADF Separation Pad.......................................................................................................................................6- 14

Chapter 7 Laser Exposure

7.1 Overview/Configuration..............................................................................................................................7- 1

7.1.1 Overview........................................................................................................................... ... ....................................7- 1

7.1.2 Overview........................................................................................................................... ... ....................................7- 3

7.2 Controlling the Laser ..................................................................................................................................7- 5

7.2.1 Overview........................................................................................................................... ... ....................................7- 5

7.2.2 Overview........................................................................................................................... ... ....................................7- 6

7.2.3 Laser Light Emission Control...................................................................................................................... .............7- 7

7.2.4 Laser Light Intensity Control....................................................................................................................................7- 7

7.2.5 Laser Light Intensity Control....................................................................................................................................7- 7

7.2.6 Image Masking Control............................................................................................................................................7- 7

7.2.7 Failure Detection...................................................................................................................................... ................7- 7

7.3 Controlling the Laser Scanner Motor..........................................................................................................7- 8

7.3.1 Overview........................................................................................................................... ... ....................................7- 8

7.3.2 Failure Detection...................................................................................................................................... ................7- 8

7.4 Parts Replacement Procedure ...................................................................................................................7- 9

7.4.1 Laser/Scanner Unit..................................................................................................................................... ... ..........7- 9

7.4.1.1 Before Removing the Laser Scanner Unit ............................................................................................................................... 7- 9

7.4.1.2 Removing the Laser Scanner Unit........................................................................................................................................... 7- 9

Chapter 8 Image Formation

8.1 Overview/Configuration..............................................................................................................................8- 1

8.1.1 Overview........................................................................................................................... ... ....................................8- 1

8.1.2 Print Process............................................................................................................................................... .............8- 2

8.1.3 Electrostatic Latent Image Formation Block............................................................................................................8- 3

8.1.4 Development Block.................................................................................................................... ... ...........................8- 4

8.1.5 Transfer Block.................................................................................................................................... ......................8- 4

Contents

8.1.6 Fixing Block................................... .......................................... ...................................................................... ... .......8- 6

8.1.7 Cleaning Block...................................................................................................................... ... ................................8- 6

8.2 Image Stabilization Control.........................................................................................................................8- 7

8.2.1 Overview................................................................................................................................................................. .8- 7

8.2.2 Environmental Change Corrective Control..............................................................................................................8- 8

8.2.3 D-half Control ......................................................... ... ..............................................................................................8- 9

8.2.4 Color Displacement Corrective Control.................................................................................................................8- 11

8.2.5 Auto Gradation Correction Control........................................................................................................................8- 13

8.3 Toner Cartridge ........................................................................................................................................8- 14

8.3.1 Overview................................................................................................................................................................8- 14

8.3.2 Toner Level Detection .................................... .......................................................................................................8- 15

8.3.3 Memory Tag Control..............................................................................................................................................8- 15

8.3.4 Toner Cartridge Detection............................................ ............................................... ... ... ....................................8- 15

8.3.5 New Toner Cartridge Detection.............................................................................................................................8- 16

8.3.6 Developing Cylinder Engagement/disengagement Control...................................................................................8- 17

8.4 Transfer Unit.............................................................................................................................................8- 18

8.4.1 ETB Unit................................ .. .................................................................................. ............................................8- 18

8.4.2 Automatic Bias Control..........................................................................................................................................8- 19

8.4.3 ETB Cleaning ......................................................... .......................................... .....................................................8- 20

8.4.4 Transfer Roller Engagement/disengagement Control ...........................................................................................8- 21

8.5 Parts Replacement Procedure .................................................................................................................8- 25

8.5.1 Drum Motor............................................................................................................................................................8- 25

8.5.1.1 Before Removing the Drum Motor ......................................................................................................................................... 8- 25

8.5.1.2 Removing the Drum Motor.....................................................................................................................................................8- 25

8.5.2 Main Drive Unit......................................................................................................................................................8- 25

8.5.2.1 Before Removing the Main Drive Unit....................................................................................................................................8- 25

8.5.2.2 Removing the Main Drive Unit ...............................................................................................................................................8- 25

8.5.2.3 Point to Note When Installing the Main Drive Unit.................................................................................................................8- 27

8.5.3 Developing Estrangement Solenoid ......................................................................................................................8- 29

8.5.3.1 Before Removing the Developing Disengage Solenoid......................................................................................................... 8- 29

8.5.3.2 Removing the Developing Disengage Solenoid.....................................................................................................................8- 29

8.5.3.3 Points to Note When Installing the Developing Disengage Solenoid..................................................................................... 8- 30

8.5.4 ETB Unit................................ .. .................................................................................. ............................................8- 30

8.5.4.1 Removing the ETB Unit ......................................................................................................................................................... 8- 30

8.5.5 ETB Motor ................................................................................................... ..........................................................8- 31

8.5.5.1 Before Removing the ETB Motor...........................................................................................................................................8- 31

8.5.5.2 Removing the ETB Motor....................................................................................................................................................... 8- 31

8.5.6 ETB Estrangement Solenoid..................................................................................... .. ..........................................8- 32

8.5.6.1 Before Removing the ETB Disengage Solenoid....................................................................................................................8- 32

8.5.6.2 Removing the ETB Disengage Solenoid................................................................................................................................ 8- 32

8.5.7 Color Displacement/Image Density Sensor...........................................................................................................8- 33

8.5.7.1 Before Removing the Color Displacement/Density Sensor ................................................................................................... 8- 33

8.5.7.2 Removing the Color Displacement/Density Sensor ............................................................................................................... 8- 33

Chapter 9 Pickup and Feed System

9.1 Overview/Configuration ..............................................................................................................................9- 1

9.1.1 Overview................................................................................................................................................................. .9- 1

9.1.2 Interval Speed Increase Control..............................................................................................................................9- 3

9.1.3 Interval Speed Increase Control..............................................................................................................................9- 4

9.2 Other Control............................ ... .... ... ... ... ....................................... ... .... ... ... ... ...........................................9- 5

9.2.1 Cassette Pickup Mechanism.............................................................................................................. .....................9- 5

9.2.2 Manual Feed Pickup Mechanism ............................................................................................................................9- 6

9.2.3 Skew Correction...................................................................... ......................................................................... .......9- 7

9.2.4 Throughput-down Control................................................................................................................... .....................9- 8

9.2.5 Throughput-down Control................................................................................................................... .....................9- 9

9.2.6 Feeding Speed Control................................................................................................ ... .......................................9- 10

Contents

9.2.7 Feeding Speed Control..........................................................................................................................................9- 10

9.2.8 Warp Control..........................................................................................................................................................9- 10

9.2.9 Delivery..................................................................................................................................................................9- 12

9.3 Detection Jams.... .... ... ... ....................................... ... ... ... .... ... ....................................... ... ..........................9- 14

9.3.1 Jam Detection Outline............................................................................................................................................9- 14

9.3.1.1 Overview................................................................................................................................................................................ 9- 14

9.3.2 Delay Jams............................................................................................................................................................9- 14

9.3.2.1 Pickup Delay JAM.................................................................................................................................................................. 9- 14

9.3.2.2 Delivery Delay JAM................................................................................................................................................................ 9- 14

9.3.2.3 Duplexing Pickup Delay JAM................................................................................................................................................. 9- 14

9.3.2.4 Duplexing Reverse Unit Delay JAM....................................................................................................................................... 9- 14

9.3.3 Stationary Jams............................... ................................................ ... .. .................................................................9- 15

9.3.3.1 Pickup Stationary JAM........................................................................................................................................................... 9- 15

9.3.3.2 Delivery Stationary JAM......................................................................................................................................................... 9- 15

9.3.4 Other Jams............................................................................................................................................................9- 15

9.3.4.1 Wrapping JAM ....................................................................................................................................................................... 9- 15

9.3.4.2 Residual JAM......................................................................................................................................................................... 9- 15

9.3.4.3 Door Open JAM ..................................................................................................................................................................... 9- 15

9.3.4.4 Automatic Delivery Function .................................................................................................................................................. 9- 15

9.4 Duplex Feeding ........................................................................................................................................9- 16

9.4.1 Overview................................................................................................................................................................9- 16

9.4.2 Duplexing Feed Control.........................................................................................................................................9- 17

9.4.3 Duplexing Pickup Operation ..................................................................................................................................9- 20

9.5 Parts Replacement Procedure .................................................................................................................9- 21

9.5.1 Pickup Feed Unit....................................... ............................................... ... ... ........................................................9- 21

9.5.1.1 Before Removing the Pickup Feed Unit................................................................................................................................. 9- 21

9.5.1.2 Removing the Pickup Feed Unit ........ ..................... ..................... ..................... ..................... ................................................ 9- 21

9.5.2 Cassette Pickup Roller...........................................................................................................................................9- 22

9.5.2.1 Before Removing the Cassette Pickup Roller........................................................................................................................ 9- 22

9.5.2.2 Removing the Cassette Pickup Roller ................................................................................................................................... 9- 22

9.5.3 Pickup Motor.......................................... .......................................... ......................................................................9- 23

9.5.3.1 Before Removing the Pickup Motor ....................................................................................................................................... 9- 23

9.5.3.2 Removing the Pickup Motor................................................................................................................................................... 9- 23

9.5.4 Cassette Pickup Solenoid......................................................................................................................................9- 24

9.5.4.1 Before Removing the Cassette Pickup Solenoid ................................................................................................................... 9- 24

9.5.4.2 Removing the Cassette Pickup Solenoid............................................................................................................................... 9- 24

9.5.5 Cassette Separation Pad.......................................................................................................................................9- 26

9.5.5.1 Removing the Cassette Separation Pad................................................................................................................................9- 26

9.5.6 Manual Pickup Roller.............................................................................................................................................9- 26

9.5.6.1 Before Removing the Manual Feed Pickup Roller................................................................................................................. 9- 26

9.5.6.2 Removing the Manual Feed Pickup Roller............................................................................................................................. 9- 26

9.5.7 Manual Pickup Solenoid ........................................................................................................................................9- 26

9.5.7.1 Before Removing the Manual Feed Pickup Solenoid ............................................................................................................ 9- 26

9.5.7.2 Removing the Manual Feed Pickup Solenoid........................................................................................................................9- 26

9.5.8 Manual Separation Roller ......................................................................................................................................9- 28

9.5.8.1 Before Removing the Manual Feed Separation Pad ............................................................................................................. 9- 28

9.5.8.2 Removing the Manual Feed Separation Pad.........................................................................................................................9- 28

9.5.9 Duplexing Feed Motor............................................................................................................................................9- 29

9.5.9.1 Before Removing the Duplex Feed Motor.............................................................................................................................. 9- 29

9.5.9.2 Removing the Duplex Feed Motor ......................................................................................................................................... 9- 29

9.5.10 Reverse Unit ............................................. ... ........................................................................................................9- 29

9.5.10.1 Before Removing the Reversal Unit..................................................................................................................................... 9- 29

9.5.10.2 Removing the Reversal Unit ................................................................................................................................................ 9- 29

9.5.11 Reverse Motor.................................................................. .......................................... ..........................................9- 31

9.5.11.1 Before Removing the Reversal Motor.................................................................................................................................. 9- 31

9.5.11.2 Removing the Reversal Motor.............................................................................................................................................. 9- 31

9.5.12 Reverse Solenoid............................................................. ............................................... .....................................9- 31

9.5.12.1 Before Removing the Reversal Solenoid.............................................................................................................................9- 31

9.5.12.2 Removing the Reversal Solenoid.........................................................................................................................................9- 31

Contents

Chapter 10 Fixing System

10.1 Overview/Configuration ..........................................................................................................................10- 1

10.1.1 Overview..............................................................................................................................................................10- 1

10.2 Various Control Mechanisms..................................................................................................................10- 2

10.2.1 Controlling the Temperature of the Fixing Unit............................................................................................ ... .....10- 2

10.2.1.1 Fixing Temperature Control ....... ..................... .......................................... ..................... ...................................................... 10- 2

10.2.1.2 Throughput Down Control.................................................................................................................................................... 10- 3

10.2.2 Fixing Pressurizing/Release Control....................................................................................................................10- 4

10.2.2.1 Fixing Sleeve Pressuring/releasing Control ......................................................................................................................... 10- 4

10.2.2.2 Fixing Sleeve Pressuring/releasing Control ......................................................................................................................... 10- 5

10.3 Protection Function.................................................................................................................................10- 7

10.3.1 Overview..............................................................................................................................................................10- 7

10.3.2 Failure Detection.................................................................................................................... .. ............................10- 7

10.4 Parts Replacement Procedure................................................................................................................10- 8

10.4.1 Fixing Unit.............................. ... ................................................................................. ............................... ... ........10- 8

10.4.1.1 Removing the Fixing Assembly............................................................................................................................................ 10- 8

10.4.2 Fixing Sleeve Unit...................................... ... ............................................... ... ... ..................................................10- 8

10.4.2.1 Before Removing the Fixing Sleeve Unit ............................................................................................................................. 10- 8

10.4.2.2 Removing the Fixing Sleeve Unit.........................................................................................................................................10- 8

10.4.3 Fixing Drive Unit ................................................... .......................................... ...................................................10- 12

10.4.3.1 Before Removing the Fixing Drive Unit.............................................................................................................................. 10- 12

10.4.3.2 Removing the Fixing Drive Unit............................................ ..............................................................................................10- 12

10.4.4 Fixing Motor.......................................................................................................................................................10- 14

10.4.4.1 Before Removing the Fixing Motor..................................................................................................................................... 10- 14

10.4.4.2 Removing the Fixing Motor ................................................................................................................................................ 10- 15

Chapter 11 External and Controls

11.1 DC Controller..........................................................................................................................................11- 1

11.1.1 Overview..............................................................................................................................................................11- 1

11.1.2 Operation of Each Block......................................................................................................................................11- 2

11.1.3 Fan/Motor Control................................... ... ... ............................................... ... ... ..................................................11- 2

11.1.4 Drum motor failure detection ............................................................................................................................. ..11- 3

11.1.5 ETB motor failure detection........................................................................................................... ......................11- 3

11.1.6 Fixing motor failure detection.................................................................................................................... ... ........11- 3

11.1.7 Main Unit Fan Failure Detection ..........................................................................................................................11- 3

11.1.8 Duplex Fan Failure Detection..............................................................................................................................11- 3

11.2 Control Panel..........................................................................................................................................11- 4

11.2.1 Overview..............................................................................................................................................................11- 4

11.3 Counter...................................................................................................................................................11- 5

11.3.1 Overview..............................................................................................................................................................11- 5

11.3.2 Overview..............................................................................................................................................................11- 6

11.3.3 Timing of Increasing the Count.................................................................................. ... ... ............................ ... .....11- 6

11.4 Power Supply..........................................................................................................................................11- 7

11.4.1 Power Supply....................................... ... .......................................... ...................................................................11- 7

11.4.1.1 Low-voltage Power Unit ....................................................................................................................................................... 11- 7

11.4.2 Protection Function.................................... ... ... ............................................... ... ... ......................... ... ...................11- 8

11.4.2.1 Protective Function .............................................................................................................................................................. 11- 8

11.4.2.2 Safety.................... ............................................................................................................................................................... 11- 8

11.4.3 Energy-Saving Function ......................................................................................................................................11- 8

11.4.3.1 Overview .............................................................................................................................................................................. 11- 8

11.5 Parts Replacement Procedure..............................................................................................................11- 10

11.5.1 Front Cover............................... .......................................... ...............................................................................11- 10

11.5.1.1 Before Removing the Front Cover Unit..............................................................................................................................11- 10

11.5.1.2 Removing the Front Cover Unit..........................................................................................................................................11- 10

11.5.2 Front Upper Cover 1..........................................................................................................................................11- 11

11.5.2.1 Before Removing Front upper Cover 1 .............................................................................................................................. 11- 11

Contents

11.5.2.2 Removing Front Upper Cover 1 ......................................................................................................................................... 11- 11

11.5.3 Rear Cover...................................................... .......................................... .........................................................11- 12

11.5.3.1 Removing the Rear Cover Unit ..........................................................................................................................................11- 12

11.5.4 Right Cover............................ .......................................... .......................................... ........................................11- 12

11.5.4.1 Before Removing the Right Cover ..................................................................................................................................... 11- 12

11.5.4.2 Removing the Right Cover................................................................................................................................................. 11- 12

11.5.5 Left Cover...........................................................................................................................................................11- 14

11.5.5.1 Before Removing the Left Cover........................................................................................................................................ 11- 14

11.5.5.2 Removing the Left Cover ................................................................................................................................................... 11- 14

11.5.6 Delivery Tray Cover ...........................................................................................................................................11- 15

11.5.6.1 Before Removing the Delivery Tray Cover............ ............................................................................................................. 11- 15

11.5.6.2 Removing the Delivery Tray Cover .................................................................................................................................... 11- 15

11.5.7 Power Station Cover.............................................................................. ... ... ......................................................11- 16

11.5.7.1 Before Removing the Electrical Components Cover.......................................................................................................... 11- 16

11.5.7.2 Removing the Electrical Components Cover ..................................................................................................................... 11- 16

11.5.8 Controller Box ....................................................................................................................................................11- 16

11.5.8.1 Before Removing the Controller Box.................................................................................................................................. 11- 16

11.5.8.2 Removing the Controller Box ............................................................................................................................................. 11- 16

11.5.9 Laser Scanner Cover.........................................................................................................................................11- 17

11.5.9.1 Before Removing the Laser Scanner Cover ...................................................................................................................... 11- 17

11.5.9.2 Removing the Laser Scanner Cover..................................................................................................................................11- 17

11.5.10 Upper Frame Unit.............................................................................................................................................11- 20

11.5.10.1 Before Removing the Upper Frame Unit .......................................................................................................................... 11- 20

11.5.10.2 Removing the Upper Frame Unit...................................................................................................................................... 11- 20

11.5.11 Operation Panel Unit..................................................................................................... ... ................................11- 22

11.5.11.1 Removing the Control Panel Unit..................................................................................................................................... 11- 22

11.5.11.2 Procedure after Replacing the Control Panel...................................................................................................................11- 23

11.5.12 NCU Board.............................................. .......................................... ...............................................................11- 23

11.5.12.1 Before Removing the NCU PCB ...................................................................................................................................... 11- 23

11.5.12.2 Removing the NCU PCB..................................................................................................................................................11- 23

11.5.13 DC Controller PCB...........................................................................................................................................11- 24

11.5.13.1 Before Removing the DC Controller PCB ........................................................................................................................ 11- 24

11.5.13.2 Removing the DC Controller PCB.................................................................................................................................... 11- 24

11.5.13.3 Procedure after Replacing the DC controller PCB ...........................................................................................................11- 24

11.5.14 Memory Controller PCB ...................................................................................................................................11- 24

11.5.14.1 Before Removing the Memory Controller PCB................................................................................................................. 11- 24

11.5.14.2 Removing the Memory Controller PCB ............................................................................................................................11- 24

11.5.15 Duplexing Driver PCB ......................................................................................................................................11- 25

11.5.15.1 Before Removing the Duplex Driver PCB ........................................................................................................................ 11- 25

11.5.15.2 Removing the Duplex Driver PCB.................................................................................................................................... 11- 25

11.5.16 Low-voltage Power Supply PCB ......................................................................................................................11- 25

11.5.16.1 Before Removing the Low-Voltage Power Supply PCB................................................................................................... 11- 25

11.5.16.2 Removing the Low Voltage Power Supply PCB............................................................................................................... 11- 25

11.5.17 High-voltage Power Supply PCB......................................................................................................................11- 26

11.5.17.1 Before Removing the High Voltage Power Supply PCB .................................................................................................. 11- 26

11.5.17.2 Removing the High Voltage Power Supply PCB .............................................................................................................. 11- 27

11.5.18 Off Hook PCB...................................................................................................................................................11- 27

11.5.18.1 Before Removing the Off Hook PCB................................................................................................................................ 11- 27

11.5.18.2 Removing the Off Hook PCB............................................................................................................................................ 11- 27

11.5.19 Cooling Fan......................................................................................................................................................11- 27

11.5.19.1 Before Removing the Cooling Fan ...................................................................................................................................11- 27

11.5.19.2 Removing the Cooling Fan...............................................................................................................................................11- 27

11.5.20 Duplex Fan.......................................................................................................................................................11- 28

11.5.20.1 Before Removing the Duplex Fan ....................................................................................................................................11- 28

11.5.20.2 Removing the Duplex Fan................................................................................................................................................11- 28

Chapter 12 e-Maintenance/imageWARE Remote

12.1 e-Maintenance/imageWARE Remote.... ... ... .... ... ... .................................................................................12- 1

12.1.1 Overview................................................................................................................................................... ...........12- 1

Contents

12.1.2 Setting Procedure............................................................ ... .................................................................................12- 1

12.1.3 Troubleshooting guide .......................................................................................................................................12- 10

12.1.4 Service cautions ............................................................ .. ................................................ ..................................12- 12

12.1.5 Overview............................................................................................................................................................12- 13

12.1.6 Service cautions ............................................................ .. ................................................ ..................................12- 14

12.1.7 Setting Procedure............................................................ ... ...............................................................................12- 15

12.1.8 FAQ ...................................................................................................................................................................12- 28

12.1.9 Troubleshooting................................................................................................................................................. 12- 29

12.1.10 Error code and strings......................................................................................................................................12- 32

Chapter 13 Maintenance and Inspection

13.1 Periodically Replaced Parts....................................................................................................................13- 1

13.1.1 Periodically Replaced Parts........................................................................................................... ......................13- 1

13.2 Consumables..........................................................................................................................................13- 1

13.2.1 Expected Service Life of Consumable Parts.......................................................................................................13- 1

13.3 Periodical Service............................. ... ... ....................................... ... .... ... ... ... .........................................13- 1

13.3.1 Periodic Service...................................................................................................................................................13- 1

Chapter 14 Measurement and Adjustments

14.1 Scanning System....................................................................................................................................14- 1

14.1.1 Procedure after Replacing the Copyboard Glass................................................................................................14- 1

14.1.2 Procedure after Replacing the Reader Unit....................................................................................................... ..14- 1

14.2 Fixing System ................................... ... ... .... ... ... ... ....................................... ... ... .... ... ... ............................14- 1

14.2.1 Checking the Nip Width (fixing pressure roller) ...................................................................................... .. ...........14- 1

14.3 Electrical Components............................................................................................................................14- 1

14.3.1 Procedure after Replacing the DC controller PCB...............................................................................................14- 1

14.3.2 Procedure after Replacing the Main Controller PCB ...........................................................................................14- 1

14.3.3 Procedure after Clearing RAM Data....................................................................................................................14- 1

14.3.4 Procedure after Replacing the Control Panel ......................................................................................................14- 2

14.4 ADF.........................................................................................................................................................14- 2

14.4.1 Outline .................................................................................................................................................................14- 2

14.4.1.1 Procedure after Replacing the ADF Unit.............................................................................................................................. 14- 2

Chapter 15 Correcting Faulty Images

15.1 Initial Checkup ........................................................................................................................................15- 1

15.1.1 Initial Check................................. ... ............................................................................................................. ........15- 1

15.2 Test Printing............................................................................................................................................15- 2

15.2.1 Test Printing................................. ... .......................................... ...................................................................... ... ..15- 2

15.3 Outline of Electrical Components............................................................................................................15- 6

15.3.1 Clutch/Solenoid....................................................................................................................................................15- 6

15.3.1.1 Solenoids ............................................................................................................................................................................. 15- 6

15.3.2 Motor/Fan ............................................................................................................................................................15- 7

15.3.2.1 Motors .................................................................................................................................................................................. 15- 7

15.3.2.2 Fans ..................................................................................................................................................................................... 15- 8

15.3.3 Sensor ................................................................................................................................... ..............................15- 9

15.3.3.1 Sensors................................................................................................................................................................................15- 9

15.3.4 Switch................................................................................................................................................................15- 11

15.3.4.1 Switches, Speaker, and Thermistors ................................................................................................................................. 15- 11

15.3.5 PCBs..................................................................................................................................................................15- 13

15.3.5.1 PCBs..................... ............................................................................................................................................................. 15- 13

15.3.6 Location of Convectors......................................................................................................................................15- 15

15.3.6.1 Location of Connectors ...................................................................................................................................................... 15- 15

Contents

Chapter 16 Error Code

16.1 Error Code Table....................................................................................................................................16- 1

16.1.1 Error Code Table..................................................................................................................................................16- 1

16.2 Error Code Details..................................................................................................................................16- 2

16.2.1 Error Code Details................................................................................................................................................16- 2

16.3 Jam Code ...............................................................................................................................................16- 8

16.3.1 Jam Code (main body). ........................................................................................................................................16- 8

16.3.2 Jam Code (ADF)..................................................................................................................................................16- 8

16.4 Alarm Code.............................................................................................................................................16- 9

16.4.1 Alarm Code (ADF)................................................................................................................................................16- 9

16.5 Fax Error Codes .....................................................................................................................................16- 9

16.5.1 Outline..................................................................................................................................................................16- 9

16.5.1.1 Error Code Outline ...............................................................................................................................................................16- 9

16.5.2 User Error Code............................................................................................................................... ... .................16- 9

16.5.2.1 User Error Code................................................................................................................................................................... 16- 9

16.5.3 Service Error Code............................................. ... ............................................... ... .............................................16- 9

16.5.3.1 Service Error Code........................... .................................................................................................................................... 16- 9

Chapter 17 Special Management Mode

17.1 Overview.................................................................................................................................................17- 1

17.1.1 Preface.................................................................................................................................. ...............................17- 1

17.1.2 Entering the Special Management Mode.............................................................................................................17- 1

17.1.3 Menu List................................................................................................................. ............................... ..............17- 2

17.2 Troubleshooting......................................................................................................................................17- 3

17.2.1 Pre-Check................................................................................................................................................. ... ........17- 3

17.2.2 User Request.......................................................................................................................................................17- 3

17.2.3 Paper Error................................ .. .......................................... ......................................................................... ......17- 3

17.2.4 Image error...........................................................................................................................................................17- 3

Chapter 18 Service Mode

18.1 Outline ....................................................................................................................................................18- 1

18.1.1 Service Mode Configuration.................................................................................................................................18- 1

18.1.2 Service Mode Configuration.................................................................................................................................18- 3

18.1.3 Exiting Service Mode ...........................................................................................................................................18- 5

18.1.4 Exiting Service Mode ...........................................................................................................................................18- 5

18.1.5 Service Mode Backup..........................................................................................................................................18- 5

18.1.6 Service Mode Backup..........................................................................................................................................18- 6

18.1.7 Service Mode Screen Operation..........................................................................................................................18- 7

18.1.8 Service Mode Screen Operation..........................................................................................................................18- 9

18.2 COPIER................................................................................................................................................18- 11

18.2.1 DISPLAY............................................................................................................................................................18- 11

18.2.1.1 DISPLAY List ..................................................................................................................................................................... 18- 11

18.2.1.2 DISPLAY List ..................................................................................................................................................................... 18- 11

18.2.2 I/O ......................................................................................................................................................................18- 12

18.2.2.1 R-CON ............................................................................................................................................................................... 18- 12

18.2.2.2 R-CON ............................................................................................................................................................................... 18- 12

18.2.3 ADJUST.............................................................................................................................................................18- 12

18.2.3.1 ADJUST List.......................................................... .............................................................................................................18- 12

18.2.3.2 ADJUST List.......................................................... .............................................................................................................18- 17

18.2.4 FUNCTION.........................................................................................................................................................18- 21

18.2.4.1 FUNCTION List.................................................................................................................................................................. 18- 21

18.2.4.2 FUNCTION List.................................................................................................................................................................. 18- 26

18.2.4.3 Adjustment of the ACS identification level ......................................................................................................................... 18- 32

18.2.4.4 Adjustment of the ACS identification level ......................................................................................................................... 18- 33

Contents

18.2.5 OPTION.............................................................................................................................................................18- 33

18.2.5.1 OPTION List....................................................................................................................................................................... 18- 33

18.2.5.2 OPTION List....................................................................................................................................................................... 18- 43

18.2.6 COUNTER.........................................................................................................................................................18- 53

18.2.6.1 COUNTER List................................................................................................................................................................... 18- 53

18.2.6.2 COUNTER List................................................................................................................................................................... 18- 54

18.3 FEEDER ...............................................................................................................................................18- 56

18.3.1 ADJUST.............................................................................................................................................................18- 56

18.3.1.1 ADJUST List......................................................................... ..............................................................................................18- 56

18.3.1.2 ADJUST List......................................................................... ..............................................................................................18- 56

18.3.2 FUNCTION........................................................................................................................................................18- 56

18.3.2.1 FUNCTION List.................................................................................................................................................................. 18- 56

18.3.2.2 FUNCTION List.................................................................................................................................................................. 18- 56

18.4 FAX.......................................................................................................................................................18- 57

18.4.1 SSSW................................................................................................................................................................18- 57

18.4.1.1 SSSW List.......................................................................................................................................................................... 18- 57

18.4.1.2 SSSW List.......................................................................................................................................................................... 18- 58

18.4.2 MENU................................................................................................................................................................18- 59

18.4.2.1 MENU List.......................................................................................................................................................................... 18- 59

18.4.2.2 MENU List.......................................................................................................................................................................... 18- 59

18.4.3 NUM...................................................................................................................................................................18- 60

18.4.3.1 NUM List ............................................................................................................................................................................ 18- 60

18.4.3.2 NUM List ............................................................................................................................................................................ 18- 60

18.4.4 NCU...................................................................................................................................................................18- 61

18.4.4.1 NCU List............................................................................................................................................................................. 18- 61

18.5 TESTMODE..........................................................................................................................................18- 65

18.5.1 SYSTEM............................................................................................................................................................18- 65

18.5.1.1 SYSTEM List...................................................................................................................................................................... 18- 65

18.5.1.2 SYSTEM List...................................................................................................................................................................... 18- 66

18.5.2 SCAN.................................................................................................................................................................18- 67

18.5.2.1 SCAN List............................................................................. ..............................................................................................18- 67

18.5.2.2 SCAN List............................................................................. ..............................................................................................18- 67

18.5.3 PRINT................................................................................................................................................................18- 68

18.5.3.1 PRINT List.......................................................................................................................................................................... 18- 68

18.5.3.2 PRINT List.......................................................................................................................................................................... 18- 69

18.5.4 FAX ....................................................................................................................................................................18- 69

18.5.4.1 FAX List................................................................................ ..............................................................................................18- 69

18.5.4.2 FAX List................................................................................ ..............................................................................................18- 70

18.5.5 PANEL...............................................................................................................................................................18- 71

18.5.5.1 PANEL List......................................................................................................................................................................... 18- 71

18.5.5.2 PANEL List......................................................................................................................................................................... 18- 73

Chapter 19 Upgrading

19.1 Outline ....................................................................................................................................................19- 1

19.1.1 Overview of Upgrade...........................................................................................................................................19- 1

19.2 Making Preparations...............................................................................................................................19- 2

19.2.1 Required System Environment............................................................................................................................19- 2

19.2.2 Before Upgrade ............................................................................................................... ......................... ...........19- 2

19.3 Downloading System Software...............................................................................................................19- 3

19.3.1 Downloading the System Software......................................................................................................................19- 3

19.3.1.1 Downloading Procedure.......................................................................................................................................................19- 3

19.3.1.2 Downloading Procedure.......................................................................................................................................................19- 7

Chapter 20 Service Tools

20.1 Service Tools................................. ... ... ... .... ... ....................................... ... ... ... ... .... ..................................20- 1

20.1.1 Special Tools.......................................................................................................................................................20- 1

Contents

20.1.2 Standard Tools.............................................................................................................................. ... ....................20- 1

20.1.3 Special Tools........................................................................................................................................................20- 2

20.1.4 Standard Tools.............................................................................................................................. ... ....................20- 2

20.1.5 Solvent/Oil List............................................................................................................................................... ......20- 3

20.1.6 Solvent/Oil List............................................................................................................................................... ......20- 3

Chapter 1 Introduction

Contents

Contents

1.1 System Construction......................................................................................................................................................1-1

1.1.1 System Configuration of Pickup/Delivery Options..................................................................................................................... 1-1

1.1.2 System Configuration of Print/Send Options .............................................................................................................................. 1-2

1.1.3 System Configuration of Print/Send Options .............................................................................................................................. 1-2

1.1.4 Functions of Print/Send Options................................. .. ....................................................... ........................................................ 1-3

1.1.5 Functions of Print/Send Options................................. .. ....................................................... ........................................................ 1-5

1.2 Product Specifications....................................................................................................................................................1-6

1.2.1 Names of Parts ............................................................................................................................................................................. 1-6

1.2.1.1 External View..................................................................................................................................................................................................1-6

1.2.1.2 External View..................................................................................................................................................................................................1-7

1.2.1.3 Cross Section...................................................................................................................................................................................................1-8

1.2.2 Using the Machine ....................................................................................................................................................................... 1-9

1.2.2.1 Turning on the Power Switch..........................................................................................................................................................................1-9

1.2.2.2 Control Panel.................................................................................................................................................................................................1-10

1.2.3 User Mode Items........................................................................................................................................................................ 1-11

1.2.3.1 Overview.......................................................................................................................................................................................................1-11

1.2.3.2 Overview.......................................................................................................................................................................................................1-11

1.2.3.3 Paper Settings................................................................................................................................................................................................1-11

1.2.3.4 Paper Settings................................................................................................................................................................................................1-11

1.2.3.5 Volume Settings ............................................................................................................................................................................................1-12

1.2.3.6 Volume Settings ............................................................................................................................................................................................1-13

1.2.3.7 Common Settings..........................................................................................................................................................................................1-14

1.2.3.8 Common Settings..........................................................................................................................................................................................1-15

1.2.3.9 Communications Settings *3.........................................................................................................................................................................1-16

1.2.3.10 Communications Settings ...........................................................................................................................................................................1-18

1.2.3.11 Address Book Settings ................................................................................................................................................................................1-20

1.2.3.12 Address Book Settings ................................................................................................................................................................................1-22

1.2.3.13 Printer Settings ............................................................................................................................................................................................1-24

1.2.3.14 Printer Settings ............................................................................................................................................................................................1-26

1.2.3.15 Timer Settings .............................................................................................................................................................................................1-30

1.2.3.16 Timer Settings .............................................................................................................................................................................................1-31

1.2.3.17 Adjustment/Cleaning...................................................................................................................................................................................1-32

1.2.3.18 Adjustment/Cleaning...................................................................................................................................................................................1-32

1.2.3.19 Report Settings ............................................................................................................................................................................................1-32

1.2.3.20 Report Settings ............................................................................................................................................................................................1-34

1.2.3.21 System Management Set. ............................................................................................................................................................................1-35

1.2.3.22 System Management Settings .....................................................................................................................................................................1-43

1.2.4 Maintenance by the User ........................................................................................................................................................... 1-53

1.2.4.1 Cleaning ........................................................................................................................................................................................................1-53

1.2.4.2 Cleaning ........................................................................................................................................................................................................1-56

1.2.5 Safety ......................................................................................................................................................................................... 1-59

1.2.5.1 Points to note at disassembly/assembly ........................................................................................................................................................1-59

1.2.5.2 CDRH Regulations........................................................................................................................................................................................1-59

1.2.5.3 Safety of the Laser Light...............................................................................................................................................................................1-59

1.2.5.4 Handling the Laser Unit................................................................................................................................................................................1-59

1.2.5.5 Safety of Toner..............................................................................................................................................................................................1-60

1.2.5.6 Notes when handling a battery......................................................................................................................................................................1-60

1.2.6 Product Specifications ............................................................................................................................................................... 1-61

1.2.6.1 Main Body Specifications .............................................................................................................................................................................1-61

1.2.6.2 Main Body Specifications .............................................................................................................................................................................1-62

1.2.6.3 ADF Specifications .......................................................................................................................................................................................1-64

1.2.6.4 ADF Specifications .......................................................................................................................................................................................1-65

1.2.6.5 FAX Specifications .......................................................................................................................................................................................1-66

1.2.6.6 FAX Specifications .......................................................................................................................................................................................1-67

Contents

1.2.7 Function List.............................................................................................................................................................................. 1-68

1.2.7.1 Print Speed.................................................................................................................................................................................................... 1-68

1.2.7.2 Print Speed.................................................................................................................................................................................................... 1-69

1.2.7.3 Paper Type ....................................................................................................................................................................................................1-70

1.1 System Construction

Chapter 1

1.1.1 System Configuration of Pickup/Delivery Options

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER C1030 / Color imageRUNNER C1030iF

0019-4882

F-1-1

[1] Cassette Feeding Unit-AB1

[1]

1-1

Chapter 1

1.1.2 System Configuration of Print/Send Options

imageRUNNER C1022 / imageRUNNER C1022i

[3]

[8]

[1]

0019-5668

[2]

[4] [5]-[7]

F-1-2

[1] Super G3 Fax Board-AB1 [2] HANDSET-J1 *1
[3] Card Reader-E1

Card Reader Attachment Kit-F1
[5] Color Send Kit-W1 *2 [6] PCL Printer Kit-Y1 *3
[7] Barcode Printing Kit-C1 *4 [8] Serial Interface Kit-J1 *5

*1: For all excluding Europe, KR *2: For North America, AUS, KR only
*3: For all excluding JP, Europe *4: Except Japan
*5: For North America only

1.1.3 System Configuration of Print/Send Options

Color imageRUNNER C1030 / Color imageRUNNER C1030iF

[4] System Upgrade RAM-A1 *2

0025-8493

1-2

[3]

Chapter 1

[2]

[7]

[1]

F-1-3

[1] Super G3 Fax Board-AB1 *1 [2] HANDSET-J1 *2
[3] Card Reader-E1

Card Reader Attachment Kit-F1
[5] PS Printer Kit-AK1 *4 [6] Barcode Printing Kit-C1
[7] Serial Interface Kit-J2 *5

*1: iR C1028(CHN,SPL:Option) *2: iR C1028(CHN,SPL,HK,South America:Option)

iR C1028i(EUR:Option) iR C1028iF(AUS:Option)
iR C1028iF(EUR,KOR:Standard) iR C1030(North America,South America:Option)
iR C1030(North America,South America:Option)

iR C1030iF(North America,South America:Standard)

*3: iR C1028(CHN,SPL,HK,South America:Option) *4: iR C1028(CHN,SPL,HK,South America:Option)

iR C1030(North America,South America:Option) iR C1028i(EUR:Option)

*5: iR C1028i(EUR:Option)

iR C1028iF(EUR:Option)
iR C1030(North America,South America:Option)

[4] PCL Printer Kit-AK1 *3

iR C1028iF(EUR,AUS,KOR:Option)

iR C1030(North America,South America:Option)
iR C1030iF(North America,South America:Option)

[4]-[6]

iR C1030iF(North America,South America:Option)

1.1.4 Functions of Print/Send Options

imageRUNNER C1022 / imageRUNNER C1022i

T-1-1

Machine Function Optional Equipment Needed

Send Function Color Send Kit-W1 - ­Fax Function Super G3 Fax Board-AB1 - -

HANDSET-J1 Super G3 Fax Board-AB1 -

Simultaneous Installation

Required Limitations

0019-5700

1-3

Chapter 1

Machine Function Optional Equipment Needed

Department ID Management Card Reader-E1 Card Reader Attachment Kit-F1 ­Barcode Printing Barcode Printing Kit-C1 PCL Printer Kit-Y1 ­512MB expansion DIMM System Upgrade RAM-A1 - ­PCL Print PCL Printer Kit-Y1 - -

Simultaneous Installation

Required Limitations

1-4

Chapter 1

1.1.5 Functions of Print/Send Options

Color imageRUNNER C1030 / Color imageRUNNER C1030iF

T-1-2

Machine Function Optional Equipment Needed

Fax Function Super G3 Fax Board-AB1 - -

HANDSET-J1 Super G3 Fax Board-AB1 ­Department ID Management Card Reader-E1 Card Reader Attachment Kit-F1 ­Barcode Printing Barcode Printing Kit-C1 PCL Printer Kit-AK1 ­PCL Print PCL Printer Kit-AK1 - -

PS Print PS Printer Kit-AK1 - -

Simultaneous Installation

Required Limitations

0025-9006

1-5

Chapter 1

1.2 Product Specifications

1.2.1 Names of Parts

1.2.1.1 External View

imageRUNNER C1022 / imageRUNNER C1022i

<Front>

[1] [2]

[8]

[7]

[6]

[5]

[4]

[3]

0019-4884

[9] [10]

[11]

[12]
[13]

[14]
[15]

[16]

[17]

<Rear>

[18]

F-1-4

[1] Feeder [2] ADF Tray
[3] Control Panel [4] Cassette 1
[5] Manual feed tray [6] Front Cover
[7] Delivery tray [8] Reader Unit
[9] Scanning Area [10] Platen Glass
[11] Main Power Switch [12] USB Port
[13] Ethernet Port [14] Handset Jack *
[15] External Device Jack * [16] Telephone Line Jack *
[17] Toner Cartridges [18] ETB Unit

*: Can be used in the case that the Super G3FAX board is installed (Pre-installed in FAX model).

[1]

[2]

1-6

F-1-5

[1] Power Socket [2] Jam removal cover

Chapter 1

1.2.1.2 External View

Color imageRUNNER C1030 / Color imageRUNNER C1030iF

<Front>

[1] [2]

[8]

[7]

[6]

[5]

[4]

[3]

0025-8711

[9] [10]

[11]

[12]
[13]

[14]
[15]

[16]

[17]

<Rear>

[18]

F-1-6

[1] Feeder [2] ADF Tray
[3] Control Panel [4] Cassette 1
[5] Manual feed tray [6] Front Cover
[7] Delivery tray [8] Reader Unit
[9] Scanning Area [10] Platen Glass
[11] Main Power Switch [12] USB Port
[13] Ethernet Port [14] Handset Jack *
[15] External Device Jack * [16] Telephone Line Jack *
[17] Toner Cartridges [18] ETB Unit

*: Can be used in the case that the Super G3FAX board is installed (Pre-installed in FAX model).

[1]

[2]

F-1-7

[1] Power Socket [2] Jam removal cover

1-7

Chapter 1

1.2.1.3 Cross Section

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER C1030 / Color imageRUNNER C1030iF

<ADF / Reader>

[3]

[4]

[5]

F-1-8

<Main Body>

[1]

[2]

[6]

[1] ADF unit [2] ADF pickup roller
[3] ADF delivery roller [4] Reader unit
[5] Platen glass [6] CCD unit

[1] [2] [3] [4]

0019-4885

[14]

[13]

[9][11][12] [10]

F-1-9

[1] Reverse unit [2] Delivery unit
[3] Delivery roller [4] Fixing unit
[5] ETB unit [6] Photosensitive drum
[7] Manual pickup roller [8] Pickup / feed unit
[9] Cassette pickup roller [10] Cassette 1
[11] Toner Cartridges [12] Laser scanner unit
[13] Controller box [14] Low-voltage power supply PCB

[5]

[6]

[7]

[8]

1-8

1.2.2 Using the Machine

Chapter 1

1.2.2.1 Turning on the Power Switch

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER C1030 / Color imageRUNNER C1030iF
The machine is equipped with the "main power switch" and "control panel power switch".

- Main power switch: Used to turns OFF/ON the machine.

- Control panel power switch: Used to enter the power save mode/low power mode/sleep mode.

[3]

F-1-10

0019-4889

[1]

[2]

[1] Main power switch [2] Control panel power switch
[3] Main power lamp

MEMO:

Since the machine is not equipped with HDD, the main power can be turned OFF during a period when the progress bar is displayed.

1-9

Chapter 1

1.2.2.2 Control Panel

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER C1030 / Color imageRUNNER C1030iF

[1] [2] [3] [4] [6]

[25]

[24]

[23]

F-1-11

[1] Custom key 2 [2] Custom key 1
[3] Main Menu key [4] Display
[5] Numeric keys [6] Power switch (sub power supply)
[7] USB slot [8] Volume control dial
[9] Clear key [10] Log in/out key
[11] Stop key [12] Start key
[13] Main Power indicator [14] Error indicator
[15] Processing/Data indicator [16] Reset key
[17] OK key [18] Scroll wheel
[19]

[21] Any key [22] Status monitor/Cancel key
[23] Counter check key [24] CF card slot
[25] SD/MS card slot

, , , keys

[20] Back key

[5]

[11][13] [10][14] [12][15][16][19][20][21][22] [17][18]

0020-6125

[7]

[8]

[9]

1-10

1.2.3 User Mode Items

Chapter 1

1.2.3.1 Overview

imageRUNNER C1022 / imageRUNNER C1022i
The following are the user mode setting items.

MEMO:

- Drawer 2 is an option cassette.

- Some setting items are displayed by pressing the left/right Any key. Perform operations by referring to the functions of the left/right Any key displayed at the bottom
of the screen.

- Depending on the country of purchase, some settings may not be available.

- The menus described in this section are based on the model Color imageRUNNER C1022i.

- Depending on the model of your machine, some settings may not be available.

1.2.3.2 Overview

Color imageRUNNER C1030 / Color imageRUNNER C1030iF
The following are the user mode setting items.

MEMO:

- Depending on the country of purchase, some settings may not be available.

- The menus described in this section are based on the model Color imageCLASS MF9280Cdn.

- Depending on the model of your machine, some settings may not be available.

1.2.3.3 Paper Settings

imageRUNNER C1022 / imageRUNNER C1022i
*: default settings

*1: Only when the Cassette Feeding Unit-AB1 is attached.

Item Settings

Stack Bypass Paper (Std.) OFF*/ON

Inch Size : LTR, LGL, STMT, EXEC, FLSC, OFI, B-OFI, M-OFI, G-LTR, G-LGL, Custom Size, COM10, Monarch, DL, ISO-C5,

Paper Size

Paper Type Plain *, Plain H, Recycled Paper, Color, Bond, Heavy 1, Heavy 2, Transparencies, Labels, Rough

Drawer 1

Paper Size

Paper Type Plain *, Plain H, Recycled Paper, Color, Bond, Heavy 1, Rough

Drawer 2 *1

Paper Size

Paper Type Plain *, Plain H, Recycled Paper, Color, Bond, Heavy 1, Rough

ISO-B5
A/B Size : A4, A5, B5
(*: A4(For all excluding USA, Canada), LTR(Only for USA, Canada))

Inch Size : LTR, LGL, EXEC, FLSC, OFI, B-OFI, M-OFI
A/B Size : A4, A5, B5
(*: A4(For all excluding USA, Canada), LTR(Only for USA, Canada))

Inch Size : LTR, LGL, EXEC, FLSC, OFI, B-OFI, M-OFI
A/B Size : A4, A5, B5
(*: A4(For all excluding USA, Canada), LTR(Only for USA, Canada))

T-1-3

Paper Settings

0020-0865

0025-8491

0019-4896

1.2.3.4 Paper Settings

Color imageRUNNER C1030 / Color imageRUNNER C1030iF
*: default settings

*1: Only when the Cassette Feeding Unit-AB1 is attached.

Item Settings

Stack Bypass Paper (Std.) OFF*/ON

Paper Size

Paper Type Plain 1, Plain 2*, Recycled Paper, Color, Bond, Heavy 1, Heavy 2, Transparencies, Labels, Envelope

Drawer 1

Paper Size
Paper Type Plain 1, Plain 2*, Recycled Paper, Color, Bond, Heavy 1

Drawer 2 *1

Paper Size
Paper Type Plain 1, Plain 2*, Recycled Paper, Color, Bond, Heavy 1

Custom Size Size 1/ Size 2

Inch Size : LTR*, LGL, STMT, EXEC, FLSC, OFI, B-OFI, M-OFI, G-LTR, G-LGL, Custom Size, COM10, Monarch, DL, ISO-C5,
ISO-B5
A/B Size : A4, A5, B5

Inch Size : LTR*, LGL, EXEC, FLSC, OFI, B-OFI, M-OFI
A/B Size : A4, A5, B5

Inch Size : LTR*, LGL, EXEC, FLSC, OFI, B-OFI, M-OFI
A/B Size : A4, A5, B5

0025-8727

T-1-4

Paper Settings

1-11