Canon EOS 1234B004 User Manual

INSTRUCTION MANUAL

INSTRUCTION

MANUAL

Thank you for purchasing a Canon product.

The EOS 30D is a high-performance, digital AF SLR camera with a large, fine-detail, 8.20-megapixel CMOS sensor. The camera has nine high-precision AF points, and it is compatible with all Canon EF lenses (including the EF-S lenses). Designed for quick shooting at all times, the camera has many features for all types of shooting from fully automatic snapshooting to creative work. Before using the camera, try it out while reading this Instruction Manual to familiarize yourself with camera operations. To prevent accidents and damage, read the Safety Warnings (p.8,9) and Handling Precautions (p.10,11).

Test the Camera Before Using

Before using the camera, take a few test shots and check that the images are properly recorded on the memory card. If the camera or memory card is faulty and the images cannot be recorded or read by a personal computer, Canon cannot be held liable for any loss or inconvenience caused.

Copyrights

Copyright laws in your country may prohibit the use of your recorded images of people and certain subjects for anything but private enjoyment. Also be aware that certain public performances, exhibitions, etc., may prohibit photography even for private enjoyment.

Canon and EOS are trademarks of Canon Inc. Adobe and Photoshop are trademarks of Adobe Systems Incorporated. CompactFlash is a trademark of SanDisk Corporation. Windows is a trademark or registered trademark of Microsoft Corporation in the

United States and other countries.

Macintosh is a registered trademark of Apple Corporation in the United States

and other countries.

All other corporate names and trademarks mentioned in this manual are the

property of their respective owners.

* This digital camera supports Design rule for Camera File System 2.0 and Exif

2.21 (also called “Exif Print”). Exif Print is a standard that enhances compatibility between digital cameras and printers. By connecting to an Exif Print-compliant printer, the shooting information is incorporated to optimize the print output.

Item Check List

Check that all the following items have been included with your camera. If anything is missing, contact your dealer.

 EOS 30D / Camera body (with Eyecup, body cap and lithium backup battery for

the date and time)

 EF-S18-55mm f/3.5-5.6 ll / Lens (with lens cap and dust cap) * Lens kit only.  Battery Pack BP-511A (with protective cover)  Battery Charger CG-580/CB-5L * CG-580 or CB-5L is included.  Power code for battery charger * For CB-5L.  Interface Cable IFC-400PCU  Video Cable VC-100  Wide Strap EW-100DGR (with eyepiece cover)

 EOS DIGITAL Solution Disk (CD-ROM)  Software Instruction Manual (CD-ROM, PDF)

 Pocket Guide

Quick start guide to shooting.

 EOS 30D INSTRUCTION MANUAL (this booklet)  Software Guide

Gives an overview of the bundled software and explains the software installation procedure.

 Warranty card of camera  Warranty card of lens * Lens Kit only.

* Be careful not to lose any of the above items. * No CF card (for recording images) is included. Please purchase it separately.

Contents

Introduction

Item Check List.................................................................................................. 3

Contents at a Glance......................................................................................... 6

Handling Precautions ...................................................................................... 10

Quick Start Guide ............................................................................................ 12

Nomenclature .................................................................................................. 14

Conventions Used in this Manual .................................................................... 20

Getting Started 21

Recharging the Battery.................................................................................... 22

Installing and Removing the Battery................................................................ 24

Using a Household Power Outlet .................................................................... 26

Mounting and Detaching a Lens...................................................................... 27

Installing and Removing the CF Card.............................................................. 28

Basic Operation............................................................................................... 30

Menu Operations ............................................................................................. 33

Setting the Language ...................................................................................... 38

Setting the Date and Time............................................................................... 39

Replacing the Date/Time Battery..................................................................... 40

Cleaning the CMOS sensor............................................................................. 41

Set the power-off time/Auto power off ............................................................. 43

CF Card Reminder .......................................................................................... 43

Dioptric Adjustment ......................................................................................... 44

Holding the Camera......................................................................................... 44

Fully Automatic Shooting 45

Using Full Auto ................................................................................................ 46

Basic Zone Modes........................................................................................... 48

Self-timer Operation ........................................................................................ 50

Image Settings 51

Setting the Image-recording Quality ................................................................ 52

Setting the ISO Speed..................................................................................... 55

Selecting a Picture Style.................................................................................. 56

Customizing the Picture Style.......................................................................... 58

Registering the Picture Style ........................................................................... 61

Setting the Color Space .................................................................................. 63

Setting the White Balance ............................................................................... 64

Custom White Balance .................................................................................... 65

Setting the Color Temperature ........................................................................ 66

White Balance Correction................................................................................ 67

White Balance Auto Bracketing ....................................................................... 68

File Numbering Methods ................................................................................. 70

Checking Camera Settings.............................................................................. 72

Setting the AF, Metering, and Drive Modes 73

Selecting the AF Mode .................................................................................... 74

Selecting the AF Point......................................................................................77

Using Focus Lock.............................................................................................79

When Autofocus Fails (Manual Focusing) .......................................................80

Selecting the Metering Mode ...........................................................................81

Selecting the Drive Mode .................................................................................82

Advanced Operations 83

Program AE......................................................................................................84

Shutter-Priority AE ...........................................................................................86

Aperture-Priority AE .........................................................................................88

Depth of Field Preview .....................................................................................89

Manual Exposure .............................................................................................90

Automatic Depth-of-Field AE............................................................................92

Setting Exposure Compensation......................................................................93

Auto Exposure Bracketing (AEB) .....................................................................94

AE Lock............................................................................................................96

Bulb Exposures ................................................................................................97

Mirror Lockup ...................................................................................................98

LCD Panel Illumination.....................................................................................99

Using the Eyepiece Cover................................................................................99

Silencing the beeper ......................................................................................100

Connecting the Remote Switch......................................................................100

Flash Photography 101

Using the Built-in Flash ..................................................................................102

Using EOS-Dedicated, External Speedlites ...................................................107

Using Non-Canon Flash Units........................................................................108

Image Playback 109

Setting the Image Review Time .....................................................................110

Auto Image Rotation ......................................................................................111

Setting the LCD Brightness............................................................................112

Image Playback..............................................................................................113

Single image display, Index Display, Magnified View ........................ 113 - 117

Jump Display, Auto playback, Rotating an Image ............................. 118 - 121

Displaying the Images on TV .........................................................................122

Protecting Images ..........................................................................................123

Erasing Images ..............................................................................................124

Formatting the CF Card .................................................................................126

Direct Printing from the Camera 127

DPOF: Digital Print Order Format 149

Transferring Images to a Personal computer 157

Customizing the Camera 165

Reference 175

Contents

Contents at a Glance

Image Quality

Set picture effects Î p.56 (Selecting a Picture Style)

Set custom picture effects Î p.58

(Customizing the Picture Style)

Print the image to a large size Î p.52 (73, 83, 1)

Take many photos Î p.52 (76, 86)

Adjust the color tone Î p.67 (WB correction)

Take black-and-white or sepia photos Î p.57 (Monochrome)

Focusing

Change the AF point Î p.77 (S Selecting the AF point)

Select the AF point quickly Î p.172 (C.Fn-13-1/2)

Photograph a still subject Î p.75 (One-Shot AF)

Photograph a moving subject Î p.75 (AI Servo AF)

Drive

Take continuous shots Î p.82 (o,i Continuous shooting)

Take a picture of myself Î p.50 (j Self-timer)

Shooting and Flash

Shoot fully automatically Î p.45-49 (Basic Zone)

Contents at a Glance

Freeze or blur the action Î p.86 (s Shutter-priority AE)

Blur or the background or make everything look sharp

Adjust the image brightness (exposure)

Photograph fireworks Î p.97 (Bulb exposures)

Photograph dark scenes Î p.101 (Flash photography)

Disabling flash Î p.49 (7 Flash off)

Î p.88 (f Aperture-priority AE)

Î p.93 (Exposure compensation)

Image Playback and Printing

View images with the camera Î p.113 (x Playback)

Erase an image Î p.124 (L Erase)

Prevent accidental erasure of an image Î p.123 (K Protect)

View images on TV Î p.122 (Video OUT)

Print images easily Î p.127 (Direct printing)

Adjust the LCD monitor brightness Î p.112 (

LCD brightness

Power Source

Use a household power outlet Î p.26 (AC adapter kit)

Change the auto power off time Î p.43 (Auto power off)

)

Safety Warnings

Follow these safeguards and use the equipment properly to prevent injury, death, and material damage.

Preventing Serious Injury or Death

• To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below:

- Do not use any batteries, power sources, and accessories not specified in this

booklet. Do not use any home-made or modified batteries.

- Do not short-circuit, disassemble, or modify the battery pack or back-up battery. Do

not apply heat or apply solder to the battery pack or back-up battery. Do not expose the battery pack or back-up battery to fire or water. And do not subject the battery pack or back-up battery to strong physical shock.

- Do not install the battery pack or back-up battery in reversed polarity (+ –). Do not

mix new and old or different types of batteries.

- Do not recharge the battery pack outside the allowable ambient temperature range

of 0°C - 40°C (32°F - 104°F). Also, do not exceed the recharging time.

- Do not insert any foreign metallic objects into the electrical contacts of the camera,

accessories, connecting cables, etc.

• Keep the back-up battery away from children. If a child swallows the battery, consult a physician immediately. (Battery chemicals may harm the stomach and intestines.)

• When disposing of a battery pack or back-up battery, insulate the electrical contacts with tape to prevent contact with other metallic objects or batteries. This is to prevent fire or an explosion.

• If excessive heat, smoke, or fumes are emitted during battery pack recharging, immediately unplug the battery charger from the power outlet to stop the recharging and prevent a fire.

• If the battery pack or back-up battery leaks, changes color, deforms, or emits smoke or fumes, remove it immediately. Be careful not to get burned in the process.

• Prevent any battery leakage from contacting your eyes, skin, and clothing. It can cause blindness or skin problems. If the battery leakage contacts your eyes, skin, or clothing, flush the affected area with lots of clean water without rubbing it. See a physician immediately.

• During the recharging, keep the equipment away from the reach of children. The cord can accidentally choke the child or give an electrical shock.

• Do not leave any cords near a heat source. It can deform the cord or melt the insulation and cause a fire or electrical shock.

• Do not fire the flash at someone driving a car. It may cause an accident.

• Do not fire the flash near a person’s eyes. It may impair the person’s vision. When using flash to photograph an infant, keep at least 1 meter away.

• Before storing the camera or accessory when not in use, remove the battery pack and disconnect the power plug. This is to prevent electrical shock, heat generation, and fire.

• Do not use the equipment where there is flammable gas. This is to prevent an explosion or fire.

• If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of electrical shock.

• Do not disassemble or modify the equipment. High-voltage internal parts can cause electrical shock.

• Do not look at the sun or an extremely bright light source through the camera or lens. Doing so may damage your vision.

• Keep the camera from the reach of small children. The neck strap can accidentally choke the child.

• Do not store the equipment in dusty or humid places. This is to prevent fire and electrical shock.

• Before using the camera inside an airplane or hospital, check if it is allowed. Electromagnetic waves emitted by the camera may interfere with the plane’s instruments or the hospital’s medical equipment.

• To prevent fire and electrical shock, follow the safeguards below:

- Always insert the power plug all the way in.

- Do not handle a power plug with wet hands.

- When unplugging a power plug, grasp and pull the plug instead of the cord.

- Do not scratch, cut, or excessively bend the cord or put a heavy object on the cord.

Also do not twist or tie the cords.

- Do not connect too many power plugs to the same power outlet.

- Do not use a cord whose insulation has been damaged.

• Occasionally unplug the power plug and use a dry cloth to clean off the dust around the power outlet. If the surrounding is dusty, humid, or oily, the dust on the power outlet may become moist and short-circuit the outlet to cause a fire.

Preventing Injury or Equipment Damage

• Do not leave equipment inside a car under the hot sun or near a heat source. The equipment may become hot and cause skin burns.

• Do not carry the camera around while it is attached to a tripod. Doing so may cause injury. Also make sure the tripod is sturdy enough to support the camera and lens.

• Do not leave a lens or lens-attached camera under the sun without the lens cap attached. Otherwise, the lens may concentrate the sun’s rays and cause a fire.

• Do not cover or wrap the battery-recharging apparatus with a cloth. Doing so may trap heat within and cause the casing to deform or catch fire.

• If you drop the camera in water or if water or metal fragments enter inside the camera, promptly remove the battery pack and back-up battery. This is to prevent fire and electrical shock.

• Do not use or leave the battery pack or back-up battery in a hot environment. Doing so may cause battery leakage or a shorter battery life. The battery pack or back-up battery can also become hot and cause skin burns.

• Do not use paint thinner, benzene, or other organic solvents to clean the equipment. Doing so may cause fire or a health hazard.

If the product does not work properly or requires repair, contact your dealer or your nearest Canon Service Center.

Handling Precautions

Camera Care

This camera is a precision instrument. Do not drop it or subject it to physical

shock.

The camera is not waterproof and cannot be used underwater. If you

accidentally drop the camera into water, promptly consult your nearest Canon Service Center. Wipe off any water droplets with a dry cloth. If the camera has been exposed to salty air, wipe with a well-wrung wet cloth.

Never leave the camera near anything having a strong magnetic field such

as a magnet or electric motor. Also avoid using or leaving the camera near anything emitting strong radio waves such as a large antenna. Strong magnetic fields can cause camera misoperation or destroy image data.

Do not leave the camera in excessive heat such as in a car in direct sunlight.

High temperatures can cause the camera to malfunction.

The camera contains precision electronic circuitry. Never attempt to

disassemble the camera yourself.

Use a blower to blow away dust on the lens, viewfinder, mirror, and focusing

screen. Do not use cleaners that contain organic solvents to clean the camera body or lens. For stubborn dirt, take the camera to a Canon Service Center.

Do not touch the camera’s electrical contacts with your fingers. This is to

prevent the contacts from corroding. Corroded contacts can cause camera misoperation.

If the camera is suddenly brought in from the cold into a warm room,

condensation may form on the camera and internal parts. To prevent condensation, first put the camera in a sealed plastic bag and let it adjust to the warmer temperature before taking it out of the bag.

If condensation forms on the camera, do not use the camera. This is to avoid

damaging the camera. If this occurs, remove the lens, CF card and battery from the camera, and wait until the condensation has evaporated before using the camera.

If the camera will not be used for an extended period, remove the battery

and store the camera in a cool, dry, well-ventilated location. Even while the camera is in storage, press the shutter button a few times once in a while to check that the camera is still working.

Avoid storing the camera where there are corrosive chemicals such as a

darkroom or chemical lab.

If the camera has not been used for an extended period, test all its functions

before using the camera. If you have not used the camera for some time or if there is an important shoot coming up, have the camera checked by your Canon dealer or check the camera yourself and make sure it is working properly.

Handling Precautions

LCD Panel and LCD Monitor

Although the LCD monitor is manufactured with very high precision

technology with over 99.99% active pixels, there might be a few dead pixels among the remaining 0.01% or less pixels. Dead pixels displaying only black or red, etc., are not a malfunction. They do not affect the images recorded.

At low temperatures, the liquid-crystal display response may become slower.

And at high temperatures, the display may blacken. In either case, the display will return to normal at room temperature.

CF Card

The CF card is a precision device. Do not drop the memory card or subject it

to vibration. Doing so could damage the images recorded on them.

Do not store or use a memory card near anything having a strong magnetic

field such as a TV set, speakers, or magnet. Also avoid places prone to having static electricity. Otherwise, the images recorded on the CF card might be lost.

Do not leave memory cards in direct sunlight or near a heat source. Doing so

can warp the cards and make them unusable.

Do not spill any liquid onto the CF card. Always store your CF cards in a case to protect the data stored on them. Do not bend the card or subject it to any excessive force or physical shock. Do not store CF cards in hot, dusty, or humid locations.

Lens Electrical Contacts

After detaching the lens from the camera, attach the lens caps or put down the lens with the rear end up to avoid scratching the lens surface and electrical contacts.

Contacts

Quick Start Guide

For EF lens

For EF-S lens

Insert the battery. (p.24)

To recharge the battery, see page 22.

Attach the lens. (p.27)

When attaching an EF-S lens, align it with the white dot on the camera. For other lenses, align it with the red dot.

Set the lens focus mode switch to <AF>.

(p.27)

Open the cover and insert a CF card.

Face the label side toward you and insert the end with the small holes into the camera.

(p.28)

Set the power switch to <1>.

(p.30)

Quick Start Guide

Set the Mode Dial to <1> (Full Auto). (p.46)

All the necessary camera settings will be set automatically.

Focus the subject. (p.30)

Aim the AF point over the subject and press the shutter button halfway to autofocus.

Take the picture. (p.30)

Press the shutter button completely to take the picture.

Review the picture on the LCD monitor. (p.110)

The captured image will be displayed for about 2 sec. on the LCD monitor.

To view images captured so far, see “Image Playback” (p.113). To delete an image, see “Erasing Images” (p.124).

Nomenclature

For detailed information, reference page numbers are provided in parentheses (p.**).

<E> AF mode selection/ White balance selection button (p.74/64)

<R> Drive mode selection/ISO speed button (p.82/55)

<Q>

Metering mode selection/Flash exposure compensation button (p.81/106)

<6> Main Dial (p.31)

Shutter button (p.30)

Red-eye reduction/ Self-timer lamp (p.104/50)

Grip (Battery compartment)

DC coupler cord hole (p.26)

Mirror (p.41,98)

Contacts (p.11)

EF-S18-55mm f/3.5-5.6 II lens

Hood EW-60C (optional) mount

Focusing ring

Zoom ring

<U> LCD panel illumination button (p.99)

LCD panel (p.16)

EF Lens mount index (p.27)

Built-in flash/AF-assist beam (p.102/78)

EF-S Lens mount index (p.27)

Flash-sync contacts

Hot shoe (p.107)

Mode Dial (p.18)

Strap mount (p.21)

<D> Flash button (p.102)

Terminal cove

Lens release button (p.27)

Depth-of-field preview button

Lens lock pin

Lens mount

Digital terminal (p.130,161)

Video OUT terminal (p.122)

(p.89)

58 mm filter thread (front of lens)

Focus mode switch

Contacts (p.11)

Lens mount index

PC terminal (p.108)

Remote control terminal (N3 type) (p.100)

Nomenclature

Dioptric adjustment knob (p.44)

Viewfinder eyepiece

<l> Print/Share button (p.147,162-164)

<M> Menu

button (p.33)

<B> Info/ Trimming orientation button (p.72,113/145)

<C> Jump button (p.118)

<x> Playback button (p.113)

<L> Erase button (p.124)

LCD monitor (p.36)

<4> Power/Quick Control Dial switch (p.30)

Eyecup (p.99)

Tripod socket

<0> Setting button (p.33)

<9> Multi-controller (p.32)

<A/I> AE lock/ FE lock button/Index/ Reduce button (p.96/105/116/117,145)

<S/u> AF point selection/ Enlarge button (p.77/117,145)

Strap mount (p.21)

CF card slot cover (p.28)

Battery compartment cover release lever (p.24)

Battery compartment cover (p.24)

Access lamp (p.29)

<5> Quick Control Dial (p.32)

CF card slot (p.28)

CF card eject button (p.29)

Nomenclature

LCD Panel

Shutter speed

Busy (buSY)

Built-in flash recycling (buSY)

ISO speed

gISO speed

White balance

Q Auto W Daylight E Shade R Cloudy Y Tungsten light U

White fluorescent light

I Flash O Custom P Color

temperature

2 White balance correction

K Custom Function

Battery check

MBeeper

LRed-eye reduction

yFlash exposure compensation

Image-recording quality

37 Large/Fine 38 Large/Normal 47 Medium/Fine 48 Medium/Normal 67 Small/Fine 68 Small/Normal 1 RAW

The actual display will show only the applicable items.

AF point selection ([ - - - ])

CF card full warning (FuLL CF)

CF card error warning (Err CF)

No CF card warning (no CF)

Error code (Err)

Cleaning image sensor (CLEA n)

Aperture

Metering mode

qEvaluative metering wPartial metering rSpot metering eCenter-weighted average metering

Exposure level indicator

Exposure compensation amount

AEB range

Flash exposure compensation amount

CF card writing status

-----

Shots remaining

Shots remaining during WB bracketing

Self-timer countdown

Bulb exposure time

0 Monochrome shooting

Drive mode

Single shooting

o High-speed continuous

shooting

i Low-speed continuous

shooting

j Self-timer

hAEB

AF mode

X One-Shot AF 9 AI Focus AF Z AI Servo AF

Viewfinder Information

Focusing screen

Spot metering circle

AF points (Superimposed display)

Nomenclature

<A> AE lock/ AEB in-progress

<D> Flash-ready Improper FE lock warning

<e> High-speed sync (FP flash) <d> FE lock/ FEB in-progress

<y> Flash exposure compensation

Shutter speed ISO speed FE lock (FEL) Busy (buSY) Built-in flash recycling (D buSY)

Aperture

Exposure level indicator Exposure compensation amount Flash exposure compensation

amount AEB range Red-eye reduction lamp-on indicato

CF card full warning (FuLL CF) CF card error warning (Err CF) No CF card warning (no CF)

The actual display will show only the applicable items.

<o> Focus confirmation light

Max. Burst

White balance correction

Nomenclature

Mode Dial

The Mode Dial is divided into two function zones.

Full Auto

c Basic Zone

All you do is press the shutter button.

1 : Full Auto (p.46) For fully automatic shooting.

Image Zone

Fully automatic shooting for specific subjects.

2 : Portrait (p.48) 3 : Landscape (p.48) 4 : Close-up (p.48) 5 : Sports (p.49) 6 : Night Portrait (p.49) 7 : Flash Off (p.49)

d Creative Zone

Set the camera as you wish.

d : Program AE (p.84) s : Shutter-priority AE

(p.86)

f : Aperture-priority AE

(p.88)

a : Manual exposure (p.90)

8: Automatic Depth-of-field

AE (p.92)

Battery Charger CG-580

This is a battery pack charger. (p.22)

Nomenclature

Battery pack slot

Red lamp

Power plug

Battery Charger CB-5L

This is a battery pack charger. (p.26)

Power cord

Power cord socket

Do not use any AC adapters or compact power adapters other than the ones (rated input: 100-240 V AC, 50/60 Hz, rated output: 7.8-8.1 V DC) shown on the system map (p.186). Using such incompatible adapters may result in fire, overheating, or electrical shock.

Battery pack slot

Red lamp

Conventions Used in this Manual

In the text, the <4> icon indicates the power switch. All operations described in this manual assume that

4> switch is set to <1> or <J>.

the <

6> icon indicates the Main Dial.

The <

5> icon indicates the Quick Control Dial.

Operations with the <5> dial assume that the <4>

switch is already set to <

>. Be sure it is set to <J>.

9 0

In this manual, the icons and markings indicating the camera’s

buttons, dials, and settings correspond to the icons and markings on the camera.

For more information, reference page numbers are provided in

parentheses (p.**).

The asterisk M on the right of the page title indicates that the

respective feature is available only in Creative Zone modes (

f, a, 8).

The Canon EF-S17-85mm f/4-5.6 IS USM lens is used as the sample

lens in this Instruction Manual.

The procedures assume that the menu settings and Custom

Functions are set to the default settings. The 3 icon indicates that the setting can be changed with the menu. (0), (9) or (8) indicates that the respective function remains active for 4 sec., 6 sec., or 16 sec. respectively after you let go of the button.

This manual uses the following alert symbols:

The Caution symbol indicates a warning to prevent shooting problems.

: The Note symbol gives supplemental information.

In the text, the <9> icon indicates the Multi-controller.

In the text, the <0> icon indicates the SET button. It

is used for menu functions and Custom Functions.

d, s,

Getting Started

This chapter explains preliminary steps and basic camera operations.

Attaching the Strap

Pass the end of the strap through the camera’s strap mount from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle.

The eyepiece cover is also

attached to the strap. (p.99)

Eyepiece cover

Recharging the Battery

Remove the cover.

When you remove the battery from

the camera, be sure to reattach the cover to protect against short circuit.

Attach the battery.

Align the battery front edge with the <–> mark (battery pack slot index) on the battery charger. While pressing down the battery, slide it in the direction of the arrow.

Battery pack slot index

CG-580

CB-5L

Recharge LevelRed lamp

0-50%

50-75%

75-90%

90% or higher

Blinks once per second

Blinks twice per second

Blinks three times

per second

Lights on

To detach the battery, follow the

above procedure in reverse.

For CG-580

Flip out the prongs and recharge the battery.

As shown by the arrow, flip out the

battery charger’s prongs.

Insert the prongs into a power outlet.

For CB-5L Connect the power cord and recharge the battery.

Connect the power cord to the charger and insert the plug into the power outlet.

X Recharging starts automatically and

the red lamp starts blinking.

The recharging time for a completely

exhausted battery is as follows: BP-511A and BP-514: Approx. 100 min. BP-511 and BP-512: Approx. 90 min.

The numbers and markings on the

battery charger correspond to the table on the left.

Recharging the Battery

Do not recharge any battery pack other than Battery Pack BP-511A, BP-

514, BP-511, or BP-512. If the battery is left in the camera for a prolonged period without the camera being used, a low electrical current may be discharged excessively and the battery’s service life may be affected. When not using the camera, remove the battery and attach the protective cover to prevent shorting. Before using the camera again, be sure to recharge the battery.

Storing the battery while fully charged may reduce its service life or

performance.

Battery Packs BP-511A, BP-514, BP-511, and BP-512 are dedicated to

Canon products. Using them with a non-Canon battery charger or product may result in malfunction or accidents for which Canon cannot be held liable.

Do not use the battery charger with any power transformer in foreign

countries. Doing so can cause malfunction.

After the red lamp lights, continue to recharge the battery for an

hour to attain a full charge.

Even a recharged, unused battery will gradually drain its power.

Recharge the battery on the day before or on the day you plan to use it.

By referring to the marking, you can attach the

protective cover to the battery to indicate whether the battery has been recharged or not.

After recharging the battery, detach it and unplug

the power cord from the power outlet.

The time required to recharge the battery depends on the ambient

temperature and battery’s recharge level.

The battery pack can operate in temperatures from 0°C to 40°C (32°F to

104°F). However, for full operating performance, using it between 10°C (50°F) and 30°C (86°F) is recommended. In cold locations such as ski areas, battery performance temporarily decreases and the operating time may be shorter. If operating time is sharply reduced even after normal recharging, the battery pack may have reached its service life. Replace it with a new battery.

Battery Charger CG-580/CB-5L is compatible with a 100 V AC to 240 V

AC 50/60 Hz power source. Therefore, it can be used in foreign countries without a separate power transformer. You only need a plug adapter if the country uses a different type of plug.

Installing and Removing the Battery

Installing the Battery

Load a fully charged BP-511A battery pack into the camera.

Open the battery compartment

cover.

Slide the lever as shown by the arrow

and open the cover.

Insert the battery.

Point the battery contacts downward. Insert the battery until it locks into

place.

Close the cover.

Press the cover until it snaps shut.

Battery Pack BP-514, BP-511, or BP-512 can also be used.

Checking the Battery Level

When the <4> switch is set to <1> or <J> (p.30), the battery level will be indicated at one of four levels.

z : Battery level OK.

x : Battery level is low.

b :

Battery will be exhausted soon.

n : Battery must be recharged.

Installing and Removing the Battery

Battery Life [Number of shots · approx.]

Temperature

At 20°C / 68°F 1100 750

At 0°C / 32°F 900 600

The figures above are based on a fully-charged BP-511A and CIPA (Camera &

Imaging Products Association) testing criteria.

The actual number of shots may be fewer than indicated above

depending on the shooting conditions.

The number of possible shots will decrease with more frequent use of

the LCD monitor.

Pressing the shutter button halfway for long periods or operating only the

autofocus can also reduce the number of possible shots.

The number of possible shots with the BP-514 is the same as indicated

in the table.

The number of possible shots with the BP-511 or BP-512 will be about

75% of the figures in the table for 20°C/68°F. At 0°C/32°F, the figures will be about the same as in the table.

The lens operation is powered by the camera’s battery. Using certain

lenses can reduce the number of possible shots.

Shooting Conditions

No Flash 50% Flash Use

Removing the Battery

Open the battery compartment

cover.

Slide the lever as shown by the arrow

and open the cover.

Remove the battery.

Slide the battery lock lever as shown

by the arrow and remove the battery.

To prevent shorting, be sure to attach

the protective cover to the battery.

Using a Household Power Outlet

With AC Adapter Kit ACK-E2 (optional), you can connect the camera to a household power outlet and not worry about the battery level.

Connect the DC Coupler.

Connect the DC Coupler’s plug to the

AC adapter’s socket.

Connect the power cord.

Connect the power cord to the AC

adapter.

Insert the plug into a power outlet. When you are finished, disconnect

the plug from the power outlet.

Place the cord in the groove.

Insert the cord carefully without

damaging the cord.

Insert the DC Coupler.

Open the battery compartment cover

and open the DC Coupler cord notch cover.

Insert the DC Coupler until the lock

position and put the cord through the notch.

Close the cover.

Do not connect or disconnect the power cord while the camera’s <4> switch is set to <1> or <J>.

Mounting and Detaching a Lens

Mounting a Lens

Remove the caps.

Remove the rear lens cap and the

body cap by turning them as shown by the arrow.

EF-S Lens mount index

EF Lens mount index

Detaching the Lens

When attaching or detaching the lens, take care to prevent dust from entering the camera through the lens mount.

Attach the lens.

Align the EF-S lens with the camera’s

white EF-S lens mount index and turn the lens as shown by the arrow until it clicks in place.

When attaching a lens other than an

EF-S lens, align the lens with the red EF lens index mark.

On the lens, set the focus mode

switch to <AF>.

If it is set to <MF>, autofocus will not

be possible.

Remove the front lens cap.

While pressing the lens release button, turn the lens as shown by the arrow.

Turn the lens until it stops, then

detach it.

Installing and Removing the CF Card

The captured image will be recorded onto the CF card (optional). Although the thickness is different, a Type I or Type II CF card can be inserted into the camera. The camera is also compatible with Microdrive and CF cards with 2 GB or higher capacity.

Installing the Card

Open the cover.

Slide the cover as shown by the

arrow to open it.

To p

CF card eject button

Shots remaining

The shots remaining depends on the remaining capacity of the CF card or the image recording quality setting, the ISO speed setting, etc.

Insert the CF card.

If the CF card is inserted in the

wrong way, it may damage the camera. As shown in the illustration, face the label side toward you and insert the end with the small holes into the camera.

X The CF card eject button pops out.

Close the cover.

Close the cover and slide it in the

direction shown by the arrow until it snaps shut.

X When the <4> switch is set to

<1> or <J>, the shots remaining is displayed on the LCD panel.

Installing and Removing the CF Card

Removing the CF Card

Open the cover.

Turn the <4> switch to <2>. Check that the “buSY” message is

not displayed on the LCD panel.

Make sure the access lamp is off,

Access lamp

When the access lamp is lit or blinking, it indicates that the images

are being written to or read by the CF card or being erased. While the access lamp is lit or blinking, do not do any of the following. Doing so may damage the image data, CF card, or camera.

• Shaking or banging the camera around.

• Open the CF card slot cover.

• Removing the battery.

If you use a CF card already containing recorded images, the images

recorded thereafter by the camera might be appended with a file number that continues on from the images already recorded on the CF card. If you want to restart the file numbering from 0001, set [c File numbering] to [Manual reset]. (p.71)

If “Err CF” (Error CF) is displayed on the LCD panel, see page 126. If you use a low-capacity CF card, it might not be able to record large

images.

Compared to CF cards, Microdrive cards are more vulnerable to

vibration and physical shock. If you use a Microdrive, be careful not to subject the camera to vibration or physical shock especially while recording or displaying images.

then open the cover.

Remove the CF card.

Press the Eject button.

X The CF card will be ejected.

Close the cover.

On the menu, if you set the [z Shoot w/o card] to [Off], it will prevent shooting without a CF card. (p.43)

Basic Operation

Power Switch

The camera can operate only after the <4> switch is turned on.

<2>: The camera is turned off and

<1> : The camera operates. <J> : The camera and <5> operate.

To save battery power, the camera turns off automatically after 1 minute of non- operation. To turn on the camera again, press the shutter button or other button.

You can change the auto power-off time with the menu’s [c Auto

power off] setting. (p.43)

If you turn the <4> switch to <2> while the captured images are being recorded onto the CF card, the remaining number of captured images to be recorded will be indicated on the top LCD panel with the number of < finished recording, the display will turn off and the camera will turn off.

Shutter Button

The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely.

Pressing halfway

This activates autofocusing (AF) and automatic exposure (AE) that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed on the top LCD panel and in the viewfinder. (0)

Pressing completely

This releases the shutter and takes the picture.

does not operate.

(p.32)

>. When all the images are

+ 170 hidden pages