Canon ELURA 40MC Instruction Manual

PUB.DIM-430

CANON INC.

U.S.A. CANON U.S.A., INC. NEW JERSEY OFFICE

100 Jamesburg Road, Jamesburg, NJ 08831 USA

CANON U.S.A., INC. CHICAGO OFFICE

100 Park Blvd., Itasca, IL 60143 USA

CANON U.S.A., INC. LOS ANGELES OFFICE

15955 Alton Parkway, Irvine, CA 92618 USA

CANON U.S.A., INC. HONOLULU OFFICE

210 Ward Avenue, Suite 200, Honolulu, HI 96814 USA

● If you have any questions, call the Canon U.S.A. Information Center toll-free at 1-800-828-4040 (U.S.A. only).

CANADA CANON CANADA INC. NATIONAL HEADQUARTERS

6390 Dixie Road, Mississauga, Ontario L5T 1P7

CANON CANADA INC. CALGARY

2828, 16th Street, N.E. Calgary, Alberta T2E 7K7

CANON CANADA INC. MONTREAL

5990 Côte de Liesse, Quebec H4T 1V7

● If you have any questions, call the Canon Canada Information Center toll-free at 1-800-828-4040. (Canada only)

● Si vous avez des questions, veuillez téléphoner sans frais au Canada 1-800-828-4040. (Canada seulement)

DIGITAL VIDEO CAMCORDER

Instruction Manual

CAMESCOPE ET LECTEUR VIDEO NUMERIQUES

Mode d’emploi

VIDEOCAMARA Y GRABADORA DIGITAL

Manual de Instrucciones

ENGLISH

MEXICO CANON MEXICANA, S. DE R.L. DE C.V.

CENTRO Y SURAMÉRICA CANON LATIN AMERICA, INC.

ASIA CANON HONGKONG COMPANY LTD.

Periferico Sur No. 4124 Col. Ex-Rancho de Anzaldo C.P. 01900 México, D.F., México

703 Waterford Way Suite 400 Miami, FL 33126 USA

9/F, The Hong Kong Club Building, 3A Chater Road, Central, Hong Kong

Printed on 100% reused paper.

Document réalisé avec du papier recyclé à 100%.

El papel aqui utilizado es 100% reciclado.

PUB.DIM-430 0000A/ABXX

DY8-9120-318-000

PRINTED IN JAPAN

IMPRIME AU JAPON

IMPRESO EN JAPÓN

PUB.DIM-430

NTSC

Mini

Digital Video Cassette

Introduction

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

Important Usage Instructions

Digital Video Camcorder, ELURA40 MC systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and use in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help. Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.

Canon U.S.A. Inc. One Canon Plaza, Lake Success, NY 11042, U.S.A. Tel No. (516)328-5600

WARNING:

TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.

Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws.

Important Warning

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure, that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Información

adicional

Función

Luego, selecciónelo desde este submenú y efectúe el ajuste.

Primero asegúrese que la

videocámara esté ajustada en...

CAM.SET UP

DISP.SET UP

CAM.SET UP

Velocidad del obturador

(SHUTTER)

Visualización de fecha/hora

(D/T DISPLAY)

Visualización de acceso a tarjeta

(CARD ACCESS)

Zoom digital

(D.ZOOM)

173

Introduction

IMPORTANT SAFETY INSTRUCTIONS

In these safety instructions the word “product” refers to the Canon Digital Video Camcorder ELURA40 MC A and all its accessories.

1. Read Instructions — All the safety and operating instructions should be read before the product is operated.

2. Retain Instructions — The safety and operating instructions should be retained for future reference.

3. Heed Warnings — All warnings on the product and in the operating instructions should be adhered to.

4. Follow Instructions — All operating and maintenance instructions should be followed.

5. Cleaning — Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. The product should be cleaned only as recommended in this manual.

6. Accessories — Do not use accessories not recommended in this manual as they may be hazardous.

7. Avoid magnetic or electric fields — Do not use the camera close to TV transmitters, portable communication devices or other sources of electric or magnetic radiation. They may cause picture interference, or permanently damage the camera.

8. Water and Moisture — Hazard of electric shock — Do not use this product near water or in rainy/moist situations.

9. Placing or Moving — Do not place on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

10. Power Sources — The CA-PS700 Compact Power Adapter should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. Regarding other power sources such as battery power, refer to instructions in this manual.

11. Polarization — The CA-PS700 Compact Power Adapter is equipped with a polarized 2-prong plug (a plug having one blade wider than the other). The 2-prong polarized plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12. Power Cord Protection — Power cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to plugs and the point from which the cords exit the product.

13. Outdoor Antenna Grounding — If an outside antenna is connected to the product, be sure the antenna is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI / NFPA No. 70—1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See figure 1.

Introduction

14. Lightning — For added protection of this product during a lightning storm, or when it is left unattended and unused for long periods of time, disconnect it from the wall outlet and disconnect the antenna. This will prevent damage to the product due to lightning and power-line surges.

15. Overloading — Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

16. Objects and Liquid Entry — Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Be careful not to spill liquid of any kind onto the product.

17. Servicing — Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

18. Damage Requiring Service — Disconnect this product from the wall outlet and all power sources including battery, and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is

damaged.

b. If any liquid has been spilled onto, or

objects have fallen into, the product.

c. If the product has been exposed to

rain or water.

d. If the product does not operate

normally even if you follow the operating instructions. Adjust only those controls that are covered by the operation instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.

e. If the product has been dropped or the

cabinet has been damaged.

f. When the product exhibits a distinct

change in performance. This indicates a need for service.

19. Replacement Parts — When replacement parts are required, be sure the service technician has used replacement parts that are specified by Canon or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

20. Safety Check — Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in safe operating order.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H)

NEC - NATIONAL ELECTRICAL CODE

ELECTRIC SERVICE EQUIPMENT

GROUND CLAMP

Fig. 1

Introduction

Operating Steps and Reference Guide

Digital Video Camcorder ELURA40 MC Instruction Manual

Mastering the Basics

Using the Full Range of Features

Editing

Using the Memory Card

Digital Video Solution Disk Instruction Manual

Installing the Software

Connecting the Camcorder to a Computer

Downloading Still Image/Movies to a Computer

Your camcorder is supplied with two manuals: the “Digital Video Camcorder ELURA40 MC Instruction Manual” and the “Digital Video Solution Disk Instruction Manual”.

Introduction

Using a Memory Card

Important Usage Instructions ....................2

IMPORTANT SAFETY

INSTRUCTIONS ..................................3

Operating Steps and Reference Guide ......5

Thank you for Choosing a Canon ..............8

Introducing the ELURA40 MC..................9

Finding Your Way Around

the ELURA40 MC ..............................10

~ Preparations ... ~

Powering Your Camcorder ......................13

Loading a Cassette ..................................17

~ Basic Recording ... ~

Recording Movies onto a Tape ................19

Zooming ..................................................24

Using the LCD Screen ............................26

~ Basic Playback ... ~

Playing Back a Tape ................................29

Connections for Playback on a

TV Screen............................................33

Tips for Making Better Videos ................36

~ General ... ~

Searching and Reviewing

While Recording ................................38

Using the Menus ......................................39

Using the Wireless Controller..................48

~ For Recording ...~

Setting the Date and Time........................51

Recording Still Images onto a Tape ........54

Turning the Image Stabilizer Off ............56

Using the Various Recording

Programs..............................................57

Using Digital Effects................................61

Using the Multi-Image Screen ................67

Audio Recording ......................................69

Setting the Self-Timer ..............................71

When Making Manual Adjustments

...~

Adjusting AE Shift ..................................73

Setting the Shutter Speed ........................74

Adjusting Focus Manually ......................76

Setting the White Balance........................77

~ For Playback ...~

Enlarging the Image During Playback ....79

Displaying Date, Time and

Camcorder Data (Data Code)..............80

Searching the Tape

(Photo Search/Date Search) ................83

Returning to a Pre-Marked Position ........84

Editing to a VCR......................................85

Dubbing to/from a Tape with

Digital Video Equipment ....................86

Recording from a VCR, TV or Analog

Camcorder (Analog Line-in) ..............88

Digitally outputting analog video and audio

signals (Analog-Digital Converter) ....90

Recording Over Existing Scenes

(AV Insert Editing) ..............................92

Audio Dubbing ........................................95

Setting the Audio Mix..............................98

Connecting to a PC Using a DV Cable..100

Memory Card Introduction ....................101

Recording Still Images

onto a Memory Card ........................106

Recording Still Images from a Tape ......108

Contents

Introduction

Editing

Using the Full Range of Features

Mastering the Basics

Introduction

: Reference page numbers

: Functions that can be operated from the body of the camcorder

: Functions that can be operated from the wireless controller

: Supplementary notes for camcorder operation

` : Operation confirmation beeps ( 23)

• Capital letters are used to refer to settings displayed in the menus and buttons labeled on the camcorder itself, e.g. Press the MENU button.

Symbols used in this instruction manual

The serial number of this product may be found on the bottom of the camcorder. No others have the same serial number as yours.You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft.

Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Model Name ELURA40 MC Serial No.

Recording Still Images from Other Devices

(VCR, TV or Other Digital

Camcorders) ......................................109

Recording Movies

onto a Memory Card ........................111

Recording Movies from a Tape ..............112

Recording Movies from Other Devices

(VCR, TV or Other Digital

Camcorders) ......................................113

Recording Panoramic Images

(Stitch Assist) ....................................114

Playing Back a Memory Card................116

Settings of Still Images/Movies ............119

Preventing Accidental Erasure

(Protect) ............................................122

Marking a Still Image for Printing

(Print Mark) ......................................123

Erasing Still Images/Movies ..................125

Using the Card Photo Printer CP-10

(Optional) ..........................................127

Combining Images and Recording

Them to a Tape (Card Mix) ..............134

Copying Still Images from

Tape to Memory Card ......................137

Copying Still Images from

Memory Card to Tape ......................138

Formatting a Memory Card....................139

Utilizing Memory Card Still

Images/Movies on a PC ....................140

Other Information and Precautions ........141

Preparing the Camcorder........................144

Notes on Using the Batteries..................145

Maintenance ..........................................148

Troubleshooting......................................152

The ELURA40 MC System Diagram ....156

Optional Accessories ..............................157

Screen Displays ......................................159

Specifications ........................................166

Index ......................................................168

Menu at a Glance ..................................171

Additional Information

Introduction

To get started we suggest that you master the basic operations of the camcorder first, before moving on to use its full range of features.

Thank you for Choosing a Canon

Your camcorder is supplied with the following accessories:

WL-D74 Wireless Controller

Two AA batteries

SS-600 Shoulder Strap Lens cap and lens cap

cord

S-150 S-video Cable

STV-250 Stereo Video Cable

Lithium button battery

CA-560 Compact Power Adapter (including AC power cable)

BP-511 Battery Pack

First, we’d like to thank you for purchasing this Canon camcorder. Its advanced technology makes it very easy to use — you will soon be making high-quality videos which will give you pleasure for years to come.

To get the most out of your new camcorder, we recommend that you read this manual thoroughly — there are many sophisticated features which will add to your recording enjoyment.

Getting started

WL-D77 Wireless Controller

Two AA batteries

Lens cap and lens cap cord

NB-2L Battery Pack

Battery Charger CB-2LT

SDC-8M SD Memory Card (with pre-recorded sample images)

S-Video Cable S-150

Software CD-ROM Digital Video Solution Disk*, ArcSoft Camera Suite CD

STV-250N Stereo Video Cable

Lithium button battery CR1616

CA-PS700 Compact Power Adapter (including AC power cable)

Soft case for SD Memory Card

IFC-300PCU USB cable*

* Required when you wish to use your

PC to work on still images/movies recorded onto a memory card with the camcorder.

Introduction

Introducing the ELURA40 MC

The DV terminal allows high-quality transfer with virtually no deterioration in quality of images. You can edit and process

images by connecting the camcorder to a PC with the IEEE 1394 terminal.

IEEE 1394 DV Terminal

You can record still images like photographs only by pressing the photo button.

Still Images

Analog Line-in Recording

An analog video signal from a television, VCR, or another camcorder can be sent into the camcorder to record images digitally onto a Mini DV cassette.

10× Optical Zoom

(200× Digital Zoom)

Memory Card

You can record still images and movies onto a SD Memory Card or MultiMediaCard. Still images from the memory can be combined with other recordings. The memory card also enables easy transfer of still images/movies to a PC. Use the supplied software to edit or attach still images/movies to your e-mail.

Show your creativity by

using the special effects

and digital faders. These

digital effects and faders

can add visual appeal and greater imaging variety. The multi-image screen captures moving subjects in 4, 9 or 16 sequences of still images with the Image Capture feature and displays them at one time.

Digital Effects

USB Terminal

Allows high-speed transfer of memory card data to a PC with a built-in USB port. You can organize and edit still images/movies on your PC using the supplied software.

Night Mode

Allows you to record bright colorful images even in dark places. The camcorder automatically adjusts to the optimum shutter speed based on the brightness of the subject.

Corrects camcorder shake so even hand-held shots at full telephoto are smooth and steady.

Image Stabilizer

This zoom range will more than take care of all your picture-taking needs, from wide-angle shots to close-ups at full telephoto (7× optical zoom and 30× digital zoom when using a memory card).

XGA-Size Still Images

High-definition, XGA-size still images through processing with a 680,000 pixels CCD.

Panoramic Images

You can merge separate images into one large panoramic scene using the supplied software (PhotoStitch) on a PC.

Audio Dubbing/AV insert

Mastering

the Basics

Finding Your Way Around the ELURA40 MC

LCD screen (p. 26)

LCD panel OPEN button (p. 26)

Speaker (p. 32)

D.EFFECTS ON/OFF button (p. 65)

D.EFFECTS SELECT button (p. 65)

REC (record) SEARCH

–

button(p. 38)/ Record review button (p. 38)/ (rewind) button (p. 29)/ CARD

–

button (p. 116)

REC SEARCH

button (p. 38)/ (fast forward) button (p. 29)/ CARD

button (p. 116)

(play/pause) button (p. 29)/ Card Mix button (p. 136)

(stop) button (p. 29)/ INDEX SCREEN button (p. 118)

Battery attachment unit (p. 16)

BATT. (battery) RELEASE button (p. 16)

Memory card compartment cover (p. 102)

Card access indicator (p. 102)

Mastering

the Basics

AE SHIFT button (p. 73)/ SLIDE SHOW button (p. 117)

FOCUS button (p. 76)/ DATA CODE button (p. 80)

POWER switch (p. 19)

Viewfinder (p. 144)

Viewfinder focusing lever (p. 144)

Program selector (p. 57)

Easy Recording

Program AE

PHOTO button (p. 54, 106)

Zoom controller (p. 24)

Selector dial (p. 32, 40)

TAPE/CARD switch (p. 19)

POWER indicator (p. 19)

SET button (p. 40)

MENU button (p. 40)

Grip belt (p. 144)

Backup battery cover (p. 147)

Cassette compartment (p. 17)

Cassette compartment cover (p. 17)

Start/Stop button (p. 20)

CAMERA

•

OFF

•

PLAY(VCR)

•

}

OPEN/EJECT switch (p. 17)

Mastering

the Basics

SET

REW

PLAY

START

/STOP

PHOTO

SELF TIMER

SCREEN

DATA

CODE

–

CARD

AUDIO

MONITOR

REC

PAUSE

SEARCH SELECT

SLIDESHOW

ZERO SET MEMORY

AUDIO

DUB.

STOP

MIX

BALANCE

ST-1

ST-2

ON/OFFD.EFFECTS

SET

ZOOM

INSERT

PAUSE

SLOW

REMOTE SET

–/

WIRELESS CONTROLLER WL-D77

× 2 button (p. 31)

START/STOP button (p. 20)

MENU button (p. 40)

TV SCREEN button (p. 159)

SELF TIMER button (p. 71)

DATA CODE button (p. 80) D.EFFECTS (Digital effects)

button (p. 65)

REC PAUSE button (p. 87, 89) ZERO SET MEMORY button (p. 84)

CARD buttons (p. 116)

Transmitter

Zoom buttons (p. 24)

SET button (p. 40)

Digital effects ON/OFF button (p. 65)

MIX BALANCE buttons (p. 98)

Controller buttons (p. 40)

Search buttons (p. 83) SEARCH SELECT button (p. 83)

AUDIO MONITOR button (p. 98)

AUDIO DUB. button (p. 96) AV INSERT button (p. 94)

REMOTE SET button (p. 49)

button (p. 30)

FF button (p. 29) PLAY button (p. 29)

STOP button (p. 29) SLOW button (p. 30)

REW button (p. 29)

PAUSE button (p. 30)

PHOTO button (p. 54, 106)

SLIDE SHOW button (p. 117)

S-video IN/OUT terminal (p. 34, 88)

Remote sensor (p. 48)

Stereo microphone (p. 95)

Terminal cover

u (LANC) terminal (p. 85)

USB terminal (p. 140)

MIC terminal (p. 69, 95)

DC IN terminal (p. 13)

Bottom view

Tripod socket (p. 36)

DV IN/OUT terminal (p. 86, 90, 100, 109)

AV (audio/video) IN/OUT terminal (p. 33, 88, 90)/

(phones) terminal (p. 33)

Tally lamp (p. 50)

Mastering

the Basics

Powering Your Camcorder

Before operating your camcorder, you will need to use the power adapter to:

Provide power from an household power socket

Charge a battery pack

Notes:

• The power adapter converts current from a household power socket (100–240 V AC, 50/60 Hz) to the DC current used by your camcorder.

• If the adapter is used next to a TV, it may cause bars to appear on the TV — move the adapter away from the TV or the antenna cable.

• Do not connect an unspecified product to the camcorder’s DC terminal. Likewise, do not connect the power adapter to an unspecified product.

Connecting the camcorder to a Household Power Socket

Use the power adapter to provide your camcorder with instant power from a household power socket. Always turn the camcorder off before connecting/removing the power source.

1. Set the POWER switch to OFF.

2. Connect the power adapter to the camcorder’s DC IN terminal.

3. Connect the power cable to the power adapter.

4. Plug the power cable into a household power socket.

5. Disconnect the power adapter from the camcorder after use.

Unplug the power cable from the household power socket, then disconnect it from the adapter.

Mastering

the Basics

Specifications

Power supply 100 – 240 V AC, 50/60Hz, 0.32A Rated output 7.4V DC, 2.0A Operating temperature range 32°F- 104°F (0°C - 40°C) Dimensions 43/8 × 11/8 × 13/4

in (112 × 29 × 45mm)

Weight 61/2 oz (186g) (without power cable)

Weight and dimensions are approximate. Errors and omissions excepted. Subject to change without notice.

CA-PS700 Compact Power Adapter

When replacement of power supply is required, please return it to the responsible nearest Canon Service Center and please replace it with the same type number CA-PS700.

The Adapter can be used with a power supply between 100 and 240 V AC. For areas where 120 V AC power is not used, you will need a special plug adapter. Contact your nearest Canon Service Center for further information.

Mastering

the Basics

Charging the battery pack

Your battery pack has been partially charged before it left the factory. It should have enough power for you to check that your camcorder is working properly. Charge the battery pack fully using the Battery Charger CB-2LT if you want it to power the camcorder for more than a few minutes. Always turn the camcorder off before attaching/removing the battery pack.

1. Attach the battery pack to the charger.

• Align the front end of the battery pack with the guides on the charger, then press and slide the battery pack into the charger to set it in place.

2. Flip out the retractable plug. Plug the AC plug into a household power socket.

• According to the type of household power socket you have, other sockets

may be blocked while the charger is in use.

3. The charge indicator lights in red and charging starts.

4. The indicator light changes to green when the battery pack is fully charged.

5. Unplug the charger from the household power socket.

6. Remove the battery pack by sliding it out.

7. Push the plug back into its retracted position.

Note:

• You can find details on using the battery pack in the “Notes on Using the

Battery Pack” ( 145). These notes include charging and recording times and how to install the backup battery.

1,6

2,5

3,4

CHARGE indicator

Mastering

the Basics

Specifications

Power supply 100 – 240 V AC, 50/60Hz,

0.17A (100V) – 0.10A (240V)

Rated output 8.4V DC, 0.5A Operating temperature range 32°F- 104°F (0°C - 40°C) Dimensions 3

/8 × 11/8 × 21/4 in

(91 × 29.5 × 56 mm)

Weight 3 oz (86 g)

Attaching the battery pack

1. Turn the POWER switch to OFF.

2. Align the front end of the battery pack with the line on the

camcorder, press lightly and slide the battery until it clicks into place.

3. Remove the battery pack after use.

• Press the BATT. RELEASE button and remove the battery.

2, 3

CB-2LT Battery Charger

Mastering

the Basics

Loading a Cassette

1. Make sure that you have attached a power source.

2. Slide the OPEN / EJECT 5 switch to release the cassette

compartment cover.

• Pull the cover fully open (while holding the button) and wait a couple of

seconds for the cassette compartment to open automatically.

• The confirmation beep sounds when the cassette cover fully opens.

3. Load or unload the cassette.

• Insert the cassette gently with the window facing outward and the

REC/SAVE tab to the bottom.

• Remove the cassette by pulling it straight out.

4. Press the P mark on the compartment until it clicks, and wait for it to close.

5. Click the cover back into place.

* D is a trade mark.

Notes:

• Do not interfere with the cassette compartment while it is opening or closing

automatically, and do not attempt to close the cover until the cassette compartment has fully retracted.

• After loading a cassette, use record search ( 38) to find the point where you

want to start recording.

• Be careful not to get your fingers caught in the cassette compartment cover.

• Do not leave the cassette in the camcorder after use — return it to its case and

store it in a cool, clean, dry place.

• When you turn the camcorder’s power on, v flashes in the display until you

load a cassette.

• With some types of tapes, the remaining tape display may not give an accurate

reading ( 160).

PUSH

Only use videocassettes marked with the D logo.*

Loading and unloading

Mastering

the Basics

Protecting tapes from accidental erasure

To protect your recording from accidental erasure, slide the tab on the cassette so that it exposes the hole. (This switch position is usually labeled SAVE or ERASE OFF.) If you load this cassette and put the camcorder in record pause mode ( 19), “THE TAPE IS SET FOR ERASURE PREVENTION” is displayed for approx. 4 seconds and then the v mark flashes in the display. If you want to record on the cassette again, slide the tab back so the hole is closed.

SAVE

REC

SAVE

REC

Cassette memory

You are unable to use the cassette memory function with this camcorder.

• To protect the tape heads, transfer cassettes directly from the tape case to the camcorder — do not open the tape protect cover or touch the tape itself.

• Do not use cassettes where the tape has been damaged or spliced — they may damage the camcorder.

• Do not insert anything into the small holes on the cassette or cover them with cellophane tape.

• Handle cassettes with care — dropping them or exposing them to external shocks may cause internal damage.

• Store cassettes in the provided case, first rewinding them to the start of the tape and then storing them upright.

• A cassette with metal plated terminals may become dirty with use, affecting information transfer. Therefore, after using a tape about 10 times, be sure to clean the terminals with a cotton swab.

Handling cassettes

Mastering

the Basics

Recording Movies onto a Tape

Have you completed the following steps?

• Attaching a power source ( 13).

• Removing the lens cap ( 144).

• Fastening the grip belt ( 144).

• Choosing the display: viewfinder ( 144) or LCD screen ( 26).

Note:

• When you’re using the viewfinder, fully close the LCD or rotate the LCD so that it faces the same direction as the lens ( 26).

You may also want to install the backup battery ( 147) in order to set the date and time display ( 51).

5, 6

Before you start recording

Recording

1. Press and hold the small button on the POWER switch and turn the POWER switch to CAMERA.

• The camcorder automatically sets to record pause mode. PAUSE appears in

the display.

• If you haven’t set the date and time display, SET THE TIME ZONE, DATE

AND TIME appears in the display. For setting the time zone, see p. 51. For setting the date and time, see p. 53.

• The camcorder power indicator lights up.

• The confirmation beep sounds.

• The camcorder will turn itself off if you leave it in record pause mode for

more than about 5 minutes. To return to record pause mode, turn the POWER switch to OFF and then back to CAMERA.

2. Make sure the TAPE/CARD switch is set to TAPE.

• Recording still images onto a memory card ( 106), recording movies

onto a memory card ( 111).

Mastering

the Basics

3. Load a cassette ( 17).

4. Slide the program selector to [.

• This selects the camcorder’s Easy Recording program. It allows you to

simply point and shoot without making any manual adjustments ( 59).

5. Press and release the start/stop button once to begin recording.

• For still image recording to a tape, see p. 54.

6. Press and release the start/stop button again to pause recording.

• The camcorder returns to record pause mode and PAUSE reappears in the

display.

• You can stop and restart recording as often as you like by pressing the

start/stop button.

Note:

• After loading a cassette, start recording when the tape counter has stopped.

• Replace the lens cap.

• Return the LCD screen flush to the camcorder body.

• Unload the cassette.

• Turn the POWER switch to OFF.

• Disconnect the power source.

Notes:

• To check that the camcorder is recording correctly, make a test recording first.

• Before making important recordings, clean the video heads using a Canon

DVM-CL Digital Video Head Cleaning Cassette or a commercially available digital video head cleaning cassette.

• To close the LCD panel, rotate it vertically until the screen faces you, then press

it until it clicks securely closed.

• You cannot monitor the sound from the speaker when recording.

• For tips on how to make better videos, see p. 36.

• For extra recording time, set REC MODE to LP mode ( 21).

When you have finished recording

Mastering

the Basics

You can choose between SP (standard play) and LP (long play). LP extends the tape usage by 1.5 times.

To change to LP mode, open the menu, select VCR SET UP, REC MODE and set it to LP.

Changing the Recording Mode

REC MODE••••SP

VCR SET UP

( 39)

Notes:

• Depending on the nature and usage condition of the tape, recording/playback in

LP mode may cause image or sound distortion. We recommend using the SP mode for important recordings.

• If you record in both modes on the same tape, the image may become distorted

during playback and the time code may not be written correctly.

• If you playback a tape recorded on another digital equipment on this camcorder,

or vice versa, image and sound may become distorted.

It is not possible to dub audio or insert images to a tape that has been recorded in LP mode.

PLAY

(VCR)

CARD

PLAY

(VCR)

TAPE

CAMERA

TAPE

Mastering

the Basics

16:9 (Wide screen TV recording)

Produces images in the 16:9 format for playback on wide screen TVs.

To switch 16:9 to ON, open the menu and select CAM.SET UP. Then select 16:9, set it to ON and close the menu.

Notes:

• “16:9” is shown in the display when you switch the 16:9 mode on.

• You cannot use the 16:9 mode with the Easy Recording program.

• You cannot use the multi-image screen when setting the 16:9 mode on.

• If you play back a recording made for 16:9 on a normal TV screen, the image will appear to be vertically “squashed” (compressed).

• If you connect the camcorder to a TV with an S1 terminal or the Video ID-1 system, recordings made in the 16:9 mode for wide screen TVs will automatically play back in wide screen mode on the TV screen.

16:9••••••••OFF

CAM.SET UP

( 39)

CAMERA

TAPE

Mastering

the Basics

Confirmation/Warning beeps

The camcorder’s short operation confirmation beeps are indicated by ` in the

illustrations. Beeps sound upon certain camcorder operations such as when you turn the camcorder on, during the self-timer countdown, right before the camcorder’s automatic shut-off, and also upon any unusual condition of the camcorder. Beeps are not recorded on the tape.

BEEP••••••••ON

SYSTEM

( 39)

To turn the beep off, open the menu and select SYSTEM. Then select BEEP, set it to OFF and close the menu.

PLAY

(VCR)

CARD

CAMERA

CARD

PLAY

(VCR)

TAPE

CAMERA

TAPE

Demonstration mode

You can see a demonstration of the camcorder’s main features. To see the demonstration, do either of the following:

• With no cassette or memory card inserted, turn the DEMO MODE on in the TAPE CAMERA menu or CARD CAMERA menu and close the menu.

• Leave the camcorder with no cassette or memory card inserted for five minutes after turning it on.

CAMERA

CARD

CAMERA

TAPE

DEMO MODE••••ON

DISP.SET UP

( 39)

To turn the demonstration mode off, open the menu and select DISP. SET UP. Then select DEMO MODE, set it to OFF and close the menu.

Note:

• To cancel the demo mode once it has begun: push any button, turn off the power, load a cassette or insert a memory card.

Mastering

the Basics

40×/200× digital zoom (card 30×)

Magnifies the camcorder’s zoom range by up to 20× in TAPE CAMERA mode. The zoom control continues to work as usual. You can freely zoom in and out between 1× and 200× magnification — the camcorder automatically switches between optical zooming (up to 10×) and digital zooming (10× to 40× or 10× to 200×).

Zooming

The camcorder’s zoom lens allows you to choose the best picture angle for each scene:

• Move the zoom control towards W to zoom out to wide-angle.

• Move it towards T to zoom in to telephoto. You can also control the speed of zooming:

• Move the control slightly to zoom slowly.

• Move it farther to zoom more quickly. (The farther you move the zoom control, the faster the zoom speed.)

The T and W buttons on the wireless controller adjust the picture angle, but not the zoom speed.

Zoom out

Zoom in

To change the digital zoom, open the menu and select CAM.SET UP. Then select D.ZOOM, set it to OFF or 200× and close the menu.

D.ZOOM••••••

40×

CAM.SET UP

( 39)

CAMERA

CARD

CAMERA

TAPE

10×optical zoom (card 7×)

Mastering

the Basics

Notes:

• When zooming, as a rule, keep at least 3 ft 3

/8 in (1 m) between you and your subject. However when the zoom is at the wide-angle position, you can focus on a subject as close as

/8 in (1 cm).

• Image resolution is slightly lower when the magnification is greater than 10×.

• You cannot use digital zoom in the Night recording program.

• You cannot use digital zoom when the multi-image screen is set. The display becomes “– – –”.

• The zoom indicator appears for 4 seconds. When the digital zoom is set to 40×, the zoom indicator extends (light blue). When the digital zoom is set to 200× zoom, the zoom indicator extends again (a darker blue).

Mastering

the Basics

Using the LCD Screen

Slide the LCD panel OPEN button and open the panel by pulling it away from the camcorder. This automatically switches the LCD screen on and the viewfinder off. Close the LCD panel until it clicks securely closed. When you close the LCD panel, the LCD screen automatically switches off and the viewfinder switches back on.

Opening and closing the LCD screen

You can choose the angle of the screen that suits you best by opening and rotating the screen, also you can rotate the LCD screen so that faces in the direction of the lens ( 28).

Changing the angle of the LCD screen

You can also push the panel flat against the camcorder until it is flush with the side, with the screen facing outwards.

90°

180°

90°

Notes:

• Avoid touching the LCD screen when moving the LCD panel.

• Do not hold the camcorder by the LCD panel or the viewfinder.

Mastering

the Basics

Adjusting the LCD screen

You can adjust the brightness of the LCD screen.

Open the menu and select DISP.SET UP from the menu. Then select BRIGHTNESS, adjust the level with the selector dial and close the menu.

A bar showing the level appears in the display.

• Turn the selector dial up to make the display brighter.

• Turn the selector dial down to make the display darker.

Notes:

• The camcorder will remember your brightness setting even after you turn it off.

• The brightness of the LCD does not affect that of the recorded images or the viewfinder.

About the LCD Screen

The LCD screen built into this camcorder is a high precision product. However, small black dots or bright points of light (red, blue or green) may appear constantly on the LCD screen. This is not a malfunction of the LCD screen and they are not recorded on the tape. (Effective dots: more than 99.99%)

BRIGHTNESS••

DISP.SET UP

–+

PLAY

(VCR)

CARD

CAMERA

CARD

PLAY

(VCR)

TAPE

CAMERA

TAPE

• Make sure you open the LCD panel at 90°, before attempting to rotate it.

• Always rotate the LCD panel vertically into place, before closing it or pushing it flat against the side of the camcorder.

• Always fully close the LCD panel until it clicks securely.

• Be careful not to leave the LCD, viewfinder or lens exposed to direct sunlight outdoors or in a window. Doing so could cause damage.

• Bright light falling on the LCD screen may cause glare that makes it difficult for you to view the image. In this case, switch to using the viewfinder. You are also able to adjust the brightness of the screen (see “Adjusting the LCD screen” below).

( 39)

Mastering

the Basics

Allowing the subject to monitor recording

When you turn the LCD panel so that it faces the same direction as the lens, you can watch yourself during recording or let your subject monitor recording. The viewfinder is also activated when the panel is in this position. (Adjusting the viewfinder,

144)

• You can choose the display style, reversed (mirror on) or not (mirror off). The recording itself is unaffected regardless of which one you choose.

LCD MIRROR••••••ON

DISP.SET UP

( 39)

To turn the mirror mode off, open the menu and select DISP.SET UP. Then select LCD MIRROR, set it to OFF and close the menu.

The indicators that appear in the LCD display when LCD MIRROR is turned on:

CAMERA

CARD

CAMERA

TAPE

Recording to a memory card

No card

TAPE CAMERA mode

CARD CAMERA mode

CARD CAMERA mode Recording to a memory card

REC REC PAUSE EJECT

Mastering

the Basics

Playing Back a Tape

You can use the LCD screen for instant, on-the-spot playback. The camcorder also plays back the sound track via the built-in speaker ( 32).

• When you play back a tape, you can also close the LCD panel with its screen side facing up.

• When you’re using the viewfinder to view playback, close the LCD panel.

For playing back your recordings on a TV, see p. 33. For using the wireless controller, see p. 48.

Note:

• To avoid accidental recording, make sure that you slide the tab on the cassette so that it exposes the hole (the switch position is usually labeled SAVE or ERASE OFF).

1. Attach a power source and turn the POWER switch to PLAY

(VCR).

• The power indicator lights up.

2. Make sure the TAPE/CARD switch is set to TAPE.

3. Load the cassette.

4. Press the e (play) button to start playback.

• To end playback, press the 3 (stop) button.

• To wind the tape forwards, stop playback and press the 1 (fast forward)

button.

• To wind the tape backwards, stop playback and press the ` (rewind)

button.

• If the playback picture is rough (mosaic-like noise), clean the video heads using a Canon DVM-CL Digital Video Head Cleaning Cassette or a commercially available digital video head cleaning cassette.

Mastering

the Basics

Frame Advance

To play back frame by frame, press the +/ ae button repeatedly during playback pause. Press and hold to play back continuous frame advance.

Frame Reverse

To play back in reverse frame by frame, press the –/4a button repeatedly during playback pause. Press and hold to play back continuous frame reverse.

Slow Forward Playback

To play back at about 1/3 normal speed, press the SLOW M button during normal playback. Press the PLAY e button to return to normal playback.

Slow Reverse Playback

To play back in reverse at about 1/3 normal speed, press the –/4a button and then the SLOW M button during normal playback. Press the PLAY e button to return to normal playback.

Special playback

Playback pause

Press the a (pause) button. To resume normal playback, press it again, or press the e (play) button. The camcorder automatically goes into stop mode after about 5 minutes’ playback pause.

Fast forward playback

To play back the recording at about 9.5 times normal speed, press and hold the 1 (fast forward) button during normal playback or press and hold the 1 (fast forward) button during normal fast forward.

Rewind playback

For reverse playback at about 9.5 times normal speed, press and hold the ` (rewind) button during normal playback or press and hold the ` (rewind) button during normal rewind.

Other playback modes

REW

– /

PAUSE

PLAY

STOP

SLOW

+ /

×2

+ 145 hidden pages