How it Works
Canon
Loading...
ELPH520HSRED
User Manual
218 pgs3.72 Mb0

Canon ELPH520HSSIL, ELPH520HSRED, ELPH520HSBLK User Manual

Camera User Guide
• Before use, be sure to read this g uide, including the safety precautions.
• This guide will familiarize you with h ow to use th e camer a correctly.
• Keep the guide handy for future reference.
ENGLISH
Package Contents
Before use, make sure the follow ing items are included in the package. If anything is missing, contact your camera dealer.
Camera Battery Pack NB-9L
Interface Cable
IFC-400PCU
• A memory card is not included (p. 3).
(with terminal cover)
Solution Disk
Battery Charger
CB-2LB/2LBE
Wrist Strap
WS-DC11
Warranty CardGetting Started DIGITAL CAMERA
PDF Manuals
For information about the inc luded software, refer to the ImageBrowser EX User Guide, in PDF format (p. 26).
• Adobe Rea der is required to view the PDF manuals.
2
Compatible Memory Cards
The following memory cards (sold separately) can be used, regardless of capacity.
• microSD memory cards*
• microSDHC memory cards*
• microSDXC memory cards*
* Conforms to SD specifications. However, not all memory cards have been verified to work
with the camera.
• Always confirm beforehand that memory cards are supported on other devices
such as card readers and computers (including the current version of your operating system).
Preliminary Notes and Legal Information
• Take and review some test shots init ially to make sure the images were
recorded correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a ca mera or ac ces sory , in clud ing me mory cards, that results in the failure of an image to be recorded or to be recorded in a way that is machine readable.
• Images recorded by the camera are intended for personal use. Refrain
from unauthorized recording that infringes on copyright law, and note that even for personal use, photography may contravene copyright or other legal rights at some performances or exhibitio ns , or in some comme rc ial settings.
• The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before contacting a Canon Customer Suppor t Help Desk.
• Although the LCD monitor is produced under extremely high-precision
manufacturing conditions and mo re than 99.99% of the pixels meet design specifications, in rare cases some pixels may be defective or may appear as red or black dots. This does not indicate camera damage or affect recorded images.
• The LCD monitor may be covered with a thin plas tic film f or prot ection
against scratches during shipment. If covered, remove the film before using the camera.
• When the camera is used over an extended perio d, it may become warm.
This does not indicate damage.
3
Part Names and Conventions in This
Guide
Lens Zoom lever Shooting: i (telephoto) / j (wide angle) Playback: k (magnify) / g (index) Shutter button Indicator
• : Important information you should know
• : Notes and tips for expert camera use
• (p. xx): Pages with related information (in this example, “xx” represents a
page number)
• Instructions in this guide apply to t he camera under default settings.
• For convenience, all supported memory cards are simply referred to as
“the memory card”.
• The tabs shown above titles indica te whether the function is used for still
images, movies, or both.
Still Images
Movies
: Indicates that the function is used when shooting or
viewing still images.
: Indicates that the function is used when shooting or
viewing movies.
Power button Mode switch 1 (Playback) button Lamp Flash Microphone Speaker
4
Part Names and Conventions in This Guide
Battery cover DC coupler terminal cover Tripod socket Screen (LCD monitor) Memory card cover Strap mount
TM
terminal
HDMI AV OUT (Audio/video output) / DIGITAL terminal
• In this guide, icons are used to represent the corresponding camera
buttons and switches on which they appear or which they resemble.
• The following camera buttons are re presented by icons.
o Up button on back q Left button on back r Right button on back p Down button on back m FUNC./SET button on back
• On-screen text is indicated in br ackets.
Movie button
b (Exposure compensation) / Up button e (Macro) / Left button h (Flash) / Right button l (Display) / Down button
FUNC./SET button n button
5
Contents
Package Contents ..................... ... .. ...2
Compatible Memory Cards........ ........3
Preliminary Notes and Legal
Information.......................................3
Part Names and Conventions in
This Guide.......................................4
Contents ............................................6
Contents: Basic Operations...............8
Safety Precautions........... .. ... ... .. ......10
Initial Preparations...........................13
Trying the Camera Out ....................21
Included Software, PDF Manuals....26
Accessories .....................................33
1
Camera Basics .................35
On/Off..............................................36
Shutter Button..................................37
Shooting Modes...............................37
Shooting Display Options ................38
FUNC. Menu....................................39
n Menu....................................40
Indicator Display ..............................41
Clock................................................41
2
Smart Auto Mode .............43
Shooting in Smart Auto Mode..........44
Common, Convenient Features.......53
Using Face ID..................................59
Image Customization Features........68
Helpful Shooting Features ...............74
Customizing Camera Operation ......77
3
Other Shooting Modes.....79
Specific Scenes...............................80
Applying Special Effects ..................84
6
Special Modes for Other
Purposes....................................... 93
Shooting Various Movies ..............101
4
G mode ...........................103
Shooting in Program AE Mode
(G Mode) .................................... 104
Image Brightness
(Exposure Compensation)..........105
Color and Continuous Shooting.... 108
Shooting Range and Focusing...... 113
Flash ............................................. 121
Other Settings ...............................123
5
Playback Mode ...............125
Viewing.......................................... 126
Browsing and Filtering Images......130
Editing Face ID Information........... 133
Image Viewing Options ................. 135
Protecting Images ......................... 139
Erasing Images.............................143
Rotating Images.......................... ..146
Image Categories...................... ... . 148
Editing Still Images........................152
Editing Movies...............................157
6
Setting Menu...................159
Adjusting Basic Camera
Functions .................................... 160
7
Accessories....................171
Tips on Using Included
Accessories................................. 172
Optional Accessories ....................173
Using Optional Accessories .......... 175
Printing Images.............................180
Contents
8
Appendix.........................193
Troubleshooting............................ 194
Handling Precautions....................197
On-Screen Messages....................198
On-Screen Information ..................200
Functions and Menu Tables ..........204
Index..............................................212
7
Contents: Basic Operations
4 Shoot
z Use camera-determined settings (Auto Mode) ............................. 44
Shooting people well
IP
Portraits
(p. 80)
Matching specific scenes
Night Scenes
(p. 80)
Applying special effects
Vivid Colors
(p. 84)
Low Light
(p. 81)
Against Snow
(p. 81)
Under Water
Poster Effect
(p. 84)
S
(p. 81)
Smooth Skin
(p. 83)
t
Fireworks
(p. 81)
Fish-Eye Effect
(p. 85)
Miniature Effect
(p. 86)
Toy Camera Effect
(p. 87)
Soft Focus
(p. 88)
z Focus on faces ............................................................... 44, 80, 115
z Without using the flash (Flash Off) ............................................... 56
z With myself in the shot (Self-Timer)........................................ 54, 96
z Add the shooting date and time (Date Stamp).............................. 57
z Use Face ID.......................................................................... 59, 127
z Movie clips and photos together (Movie Digest)........................... 93
Monochrome
(p. 89)
8
Contents: Basic Operations
1 View
z View images (Playback Mode) ................................................... 126
z Automatic playback (Slideshow)................................................. 136
z On a TV ...................................................................................... 175
z On a computer.............................................................................. 27
z Browse through images quickly.................................................. 130
z Erase images.............................................................................. 143
E Shoot/View Movies
z Shoot movies........................................................................ 44, 101
z View movies ............................................................................... 126
z Fast-moving subjects, slow-motion playback ............................. 101
c Print
z Print pictures............................................................................... 180
Save
z Save images to a computer.......................................................... 27
9
Safety Precautions
• Before using the product, please ensure that you read the safety precautions described
below. Always ensure that the product is used correctly.
• The safety precautions noted on the following pages are intended to prevent injuries to
yourself and other persons, or damage to the equipment.
• Be sure to also check the guides included with any separately sold accessories you
use.
Warning
• Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash.
• Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
• Use only recommended power sources.
• Do not attempt to disassemble, alter or apply heat to the product.
• Avoid dropping or subjecting the product to severe impacts.
• To avoid the risk of injury, do not touch the interior of the product if it has been
dropped or otherwise damaged.
• Stop using the product immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
• Do not use organic solvents such as alcohol, benzine, or thinner to clean the
product.
• Do not let the product come into contact with water (e.g. sea water) or other
liquids.
• Do not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire. If liquids or foreign objects come into contact with the camera interior, immediately turn the camera off and remove the battery. If the battery charger becomes wet, unplug it from the outlet and consult your camera distributor or a Canon Customer Support Help Desk.
• Use only the recommended battery.
• Do not place the battery near or in direct flame.
• Unplug the power cord periodically, and using a dry cloth, wipe away any dust
and dirt that has collected on the plug, the exterior of the power outlet, and the surrounding area.
• Do not handle the power cord with wet hands.
• Do not use the equipment in a manner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are damaged, or not fully plugged into the outlet.
• Do not allow dirt or metal objects (such as pins or keys) to contact the terminals
or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could cause injury and damage the surroundings. In the event that a battery leaks and the battery electrolyte contacts eyes, mouth, skin or clothing, immediately flush with water.
Denotes the possibility of serious injury or death.
10
Safety Precautions
• Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of electronic instruments and other devices. Exercise adequate caution when using the camera in places where use of electronic devices is restricted, such as inside airplanes and medical facilities.
• Do not play the supplied CD-ROM(s) in any CD player that does not support data
CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the loud sounds of a CD-ROM played on an audio CD player (music player). Additionally, this could damage the speakers.
Caution
• When holding the camera by the strap, be careful not to bang it, subject it to
strong impacts or shocks, or let it get caught on other objects.
• Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
• Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
• When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
• Avoid using, placing or storing the product in the following places:
- Places subject to strong sunlight
- Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery, resulting in electrical shock, fire, burns or other injuries. High temperatures may cause deformation of the camera or battery charger casing.
• Viewing images on the camera screen for prolonged periods may cause
discomfort.
Caution
• Do not aim the camera at bright light sources (such as the sun on a clear day).
Doing so may damage the image sensor.
• When using the camera on a beach or at a windy location, be careful not to allow
dust or sand to enter the camera.
This may cause the product to malfunction.
Denotes the possibility of injury.
Denotes the possibility of damage to the equipment.
11
Safety Precautions
• In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from the flash to prevent heat build-up and damage to the unit.
• Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
• Before you discard the battery, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
• Unplug the battery charger from the power outlet after charging is complete, or
when you are not using it.
• Do not place anything, such as cloth, on top of the battery charger while it is
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort, resulting in fire.
• Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or damage.
• Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage the screen.
• When putting the camera in your bag, ensure that hard objects do not come into
contact with the screen.
• Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.
12
Initial Preparations
Prepare for shooting as follows.
Attaching the Strap
z Thread the end of the strap through the strap
Holding the Camera
z Place the strap around your wrist. z When shooting, keep your arms close to your
hole ( ), and then pull the other end of the strap through the loop on the th readed end ().
body and hold the camera securely to prevent it from moving. Do not rest your fingers on the flash.
13
Initial Preparations
Charging the Battery
Before use, charge the battery with the included charger. Be sure to charge the battery initially, because the camera is not sold with the battery charged.
Remove the cover.
Insert the battery.
z After aligning the S marks on the battery and
charger, insert the battery by pushing it in ( ) and down ( ).
Charge the battery.
z For CB-2LB: Flip out the plug ( ) and plug
the charger into a power outlet ( ).
z For CB-2LBE: Plug the power cord into the
charger, then plug the other end into a power
CB-2LB
outlet.
X The charging lamp turns orange and
charging begins.
X When the charging is finished, the lamp turns
green.
14
CB-2LBE
Remove the battery.
z After unplugging the battery charger, remove
the battery by pushing it in ( ) and up ( ).
Initial Preparations
• To protect the battery and keep it in optimal condition, do not charge
it continuously for more than 24 ho urs.
• For battery chargers that use a power cord, do not attach the charger
to other objects. Make sure that it can always move freely.
• For details on charging time and the number of shots and recording time
possible with a fully charged battery, see “Specifications” in the Getting Started guide.
Inserting the Battery
Insert the included battery.
Open the cover.
z Slide the cover ( ) and open it ( ).
Insert the battery.
z While pres sing the battery lock in the
direction of the arrow, inse rt the battery facing as shown and push it in until it clicks into the locked position.
z Batteries inserted facing the wrong way
cannot be locked into the correct position. Always confirm that the battery is facing the
Terminals Battery Lock
right way and locks when inserted.
Close the cover.
z Lower the cover ( ) and hold it down as you
slide it until it clicks into the closed position ().
15
Initial Preparations
Inserting the Memory Card
Insert a memory card (sold separately). Note that before using a new memory card (or a memory card formatted in another device), you should format the memory card with this camera (p. 164).
Open the cover.
z Slide the cover ( ) and open it ( ).
Insert the memory card.
z Insert the memory card facing as shown until
it clicks into the locked posit ion.
z Make sure the memory card is facing the right
way when you insert it. Inserting memory cards facing the wrong way may damage the camera.
Close the cover.
z Lower the cover ( ) and hold it down as you
slide it until it clicks into the closed position ().
Removing the Battery
z Open the cover and press the battery lock in
the direction of the arrow.
X The battery will pop up.
16
Initial Preparations
Removing the Memory Card
z Open the cover and push the memory card in
until it clicks, and then slowly release the memory card.
X The memory card will pop up.
Setting the Date and Time
A screen for setting the date and time is displayed the first time you turn the camera on. Be sure to specify the date and time, which is the basis for dates and times added to your images.
Turn the camera on.
z Press the power button.
X The [Date/Time] screen is displayed.
Set the date and time.
z Press the qr butt ons to choose an option. z Press the op buttons to specify the date
and time.
z When finished, press the m button.
17
Initial Preparations
Set the local time zone.
z Press the qr butt ons to choose your local
time zone.
Finish the setup process.
z Press the m button when finished. After a
confirmation message, the setting screen is no longer displayed.
z To turn off the camera, press the power
button.
• Unless you set the date, time, and local time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify the correct information.
• To set daylight saving time (1 hour ahead), choose in step 2 and then
choose by pressing the op buttons.
18
Initial Preparations
Changing the Date and Time
Adjust the date and time as follows.
Access the camera menu.
z Press the n button.
Choose [Date/Time].
z Move the zoom lever to choose the 3 tab. z Press the op buttons to choose [Date/
Time], and then press the m button.
Change the date and time.
z Follow step 2 on p. 17 to adjust the settings. z Press the n button to close the menu.
• Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
• The date/time battery will be charged in about 4 hours once you insert a charged
battery or connect the camera to an AC adapter kit (sold separately, p. 173), even if the camera is left off.
• Once the date/time battery is depleted, the [Date/Time] screen will be displayed
when you turn the camera on. Follow the steps on p. 17 to set the date and time.
19
Initial Preparations
Display Language
The display language can be chang ed as needed.
Enter Playback mode.
z Press the 1 button.
Access the setting screen.
z Press and hold the m button, and then
immediately press the n button.
Set the display language.
z Press the opqr buttons to choose a
language, and then press the m button.
X Once the display language has been set, the
setting screen is no longer displayed.
•
A clock icon is displayed if you wait too long in step 2 after pressing the m button before you press the the clock icon and repeat step 2.
• You can also change the display language by pressing the n button and
choosing [Language ] on the 3 tab.
n
button. In this case, press the m button to dismiss
20
Still Images Movies
Trying the Camera Out
Follow these instructions to turn th e camera on, shoo t still images or movi es, and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scen es, simply let the camera determine the subject and shooting conditions.
Turn the camera on.
z Press the power button.
X The startup screen is displayed.
Enter A mode.
z Set the mode switch to A. z Aim the camera at the subject. As the camera
determines the scene, it will make a slight clicking noise.
X Icons representing the scene and image
stabilization mode are displayed in the upper right of the screen.
X Frames displayed around any subjects that
are detected indicate that they are in focus.
Compose the shot.
z To zoom in and enlarge the subject, move the
zoom lever toward i (telephoto), and to zoom away from the subject, move it towar d j (wide angle).
21
Trying the Camera Out
AF Frames
Shoot. Shooting Still Images
Focus.
z Press the shutter button lightly, halfway
down. The camera beeps twice after focusing, and AF frames are displayed to indicate image areas in focus.
Shoot.
z Press the shutter button all the way down.
X As the camera shoots, a shutter sound is
played, and in low-light conditions , the flas h fires automatically.
X Keep the camera still until the shutter sound
ends.
X Your shot remains displayed on the screen
for about two seconds.
z Even while the shot is displayed, you can
take another shot by pressing t he shutter button again.
22
Elapsed Time
Trying the Camera Out
Shooting Movies
Start shooting.
z Press the movie button. The camera beeps
once as recording begins, and [ Rec] is displayed with the elapsed time.
X Black bars displayed on the top and bottom
edges of the screen indicate image areas not recorded.
X Frames displayed around any faces that are
detected indicate that they are in focus.
z Once recording begins, you can take your
finger off the movie button.
Finish shooting.
z Press the movie button again to stop
shooting. The camera beeps twice as recording stops.
X Recording will stop automatically when the
memory card becomes full.
23
Trying the Camera Out
Viewing
After shooting images or movies, you can view them on the screen as follows.
Enter Playback mode.
z Press the 1 button.
X Your last shot is displayed.
Browse through your images.
z To view the previous image, press the q
button. To view the next image, press the r button.
z To access Scroll Display mode, press and
hold the qr buttons for at least one second. In this mode, press the qr buttons to browse through images.
z To return to single-image display, press the
m button.
z To browse images grouped by shooting date,
press the op buttons in Scroll Display mode.
z Movies are identified by a icon. To play
movies, go to step 3.
24
Trying the Camera Out
Play movies.
z Press the m button, press the op buttons
to choose , and then press the m button again.
z Playback now begins, and after the movie is
finished, is displayed.
z To adjust the volume, press the op buttons
during playback.
• To switch to Shooting mode from Playback mode, press the shutter button
halfway.
Erasing the Images
You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be rec ov er ed .
Choose an image to erase.
z Press the qr buttons to choose an image.
Erase the image.
z Press the m button, press the op buttons
to choose a, and then press the m button again.
z After [Erase?] is displayed, press the qr
buttons to choose [Erase], and the n press the m button.
X The current image is now erased.
z To cancel erasure, press the qr buttons to
choose [Cancel], and then press the m button.
• You can also erase all images at once (p. 143).
25
Included Software, PDF Manuals
The software and PDF manuals on the in cluded CD-ROM are introduced below, with instructions for installation, saving images to a computer, and using the PDF manuals.
Features of the Included Software
After installing the software on the CD-ROM, you ca n do the follow ing thin gs on your computer.
ImageBrowser EX
z Import images and change camera settings z Manage images: view, search, and organize z Print and edit images z Update to the latest software version with the auto update function
Auto Update Function
Using the included software, you can upda te to the lates t ve rsion, and download new functions via the Int ernet (some software excluded). B e sure to install the software on a computer with an Internet connection so you can use this function.
• Internet access is required to use this function, and any ISP account
charges and access fees must be paid separately.
• This function may not be available depending on the camera or
region you live in.
PDF Manuals
Installing the software on the CD-ROM will also install the following PDF manuals on your computer.
Camera User Guide
Once you are familiar with the information in Getting Started, refer to this for a more in­depth understanding of camera operation.
ImageBrowser EX User Guide
Refer to this guide when using the included software. This guide can be referenced from the ImageBrowser EX Help function.
• Depending on the country or region where you purchased your camera, the
ImageBrowser EX User Guide may not be accessible from the Help function. In such cases, it will either be included on the CD-ROM bundled with your camera, or you can download the latest version from the Canon website.
26
Included Software, PDF Manuals
System Requirements
The included software can be used on the following computers. Adobe Reader is required to view the PDF manuals.
Windows
Operating System
Computer
Processor
RAM
Interfaces USB Free Hard Disk
Space Display 1024 x 768 resolution or higher
* In Windows XP, Microsoft .NET Framework 3.0 or later (max. 500 MB) must be installed.
Installation may take some time, depending on computer performance.
Macintosh
Operating System Mac OS X 10.6
Computer
Processor
RAM 1 GB or more (still images), 2 GB or more (movies) Interfaces USB Free Hard Disk
Space Display 1024 x 768 resolution or higher
Windows 7 SP1 Windows Vista SP2 Windows XP SP3
Computers running one of the above operating systems (preinstalled), with an included USB port and Internet connection
1.6 GHz or h igher ( still ima ges), Core 2 Du o 2.6 GHz or high er (m ovies ) Windows 7 (64 bit): 2 GB or more
Windows 7 (32 bit), Windows Vista (64 bit, 32 bit): 1 GB or more (still images), 2 GB or more (movies) Windows XP: 512 MB or more (still images), 2 GB or more (movies)
440 MB or more*
Computers running one of the above operating systems (preinstalled), with an included USB port and Internet connection
Core Duo 1.83 GHz or higher (still images), Core 2 Duo 2.6 GHz or higher (movies)
550 MB or more
• Check the Canon website for the latest system requirements, including
supported OS versions.
27
Included Software, PDF Manuals
Installing the Software and PDF Manuals
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration. Using the software auto update function, you can update to the latest version and download new functions via the Internet (some software excluded), so be sure to install the software on a computer with an Internet connection.
Insert the CD-ROM in the computer’s CD-ROM drive.
z Insert the included CD-ROM (DIGITAL
CAMERA Solution Disk) (p. 2) in the computer’s CD-ROM drive.
z On a Macintosh computer, after inserting the
disc, double-click the desktop disc icon to open it, and then double-clic k the icon displayed.
Begin the installation.
z Click [Easy Installation] and follow the on-
screen instructions to complete the installation process.
When a message is displayed prompting you to connect the camera, connect it to a computer.
z With the camera turned off, open the cover
( ). With the smaller plug of the included interface cable (p. 2) in the orientation shown, insert the plug fully into the camera terminal ( ).
28
Included Software, PDF Manuals
z Insert the larger plug of the interface cable in
the computer’s USB port. For details about USB connections on the computer, refer to the computer user manual.
Install the files.
z Turn the camera on, and follow the on-screen
instructions to complete the installation process.
X The software will connect to the Internet to
update to the latest version a nd download new functions. Installation may take some time, depending on computer performance and the Internet connection.
z Click [Finish] or [Restart] on the screen after
installation and remove the CD-ROM when the desktop is displayed.
z Turn the camera off and disconnect the
cable.
• When not connected to the Internet, there are the following limitations.
- The screen in step 3 will not be displayed.
- Some functions may not be installed.
- The first time you connect the camera to the computer, drivers will be installed,
so it may take a few minutes until camera images are accessible.
• If you have several cameras that were bundled with ImageBrowser EX on the
included CD-ROMs, be sure to use each camera with their included CD-ROM and follow the on-screen installation instructions for each. Doing so will ensure that each camera will receive the correct updates and new functions via the auto update function.
29
Included Software, PDF Manuals
Saving Images to a Computer
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
Connect the camera to the computer.
z Follow step 3 on p. 28 to connect the camera
to a computer.
Turn the camera on to access CameraWindow.
z Press the 1 button to turn the camera on. z On a Macintosh computer, CameraWindow is
displayed when a connection is established between the camera and computer.
z For Windows , follow the steps introduced
below.
z In the screen that displays, click the link
to modify the program.
z Choose [Downloads Images From Canon
Camera using Canon CameraWindow] and then click [OK].
30
z Double click .
Loading...
+ 188 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use