Canon
EF~
LENS
~~*
EF-S
18-200mm
1/3.5-5.6
IS
Instruction
II
Mode d'emploi
II
Instrucciones
II
fiffll~
aJl
11
II
ffffl
ID!Il)Hf
II
IMAGE
STABILIZER
a~m*F~±m,~*~~ff~~~*~m~~~o
~*~~.~.~*~,
~~8~~.~.~o
~aft*~~~~~~~L,~~~mo
Thank you for purchasing a Canon product.
The Canon EF-S18-200mm f/3.5-5.6
IS
lens
is
a high-performance high-magnification zoom
lens equipped with
an
Image Stabilizer, and
has been developed for digital SLRs
compatible with EF-S lenses*.
* As of August 2008, only the EOS 400, EOS 300,
EOS
200,
EOS 20Da,
EOS
DIGITAL REBEL
XS/1000D, EOS DIGITAL REBEL XSi/450D, EOS
DIGITAL REBEL XTil400D DIGITAL,
EOS
DIGITAL REBEL XT/350D DIGITAL, and EOS
DIGITAL REBEU300D DIGITAL are compatible
with EF-S lenses.
{@.
"IS" stands for Image Stabilizer.
Conventions used
in
this instruction
Warning to prevent lens or camera
malfunction or damage.
Features
1.
The Image Stabilizer gives the equivalent
effect of a shutter speed four stops faster*.
This function provides optimal image
stabilization depending
on
shooting conditions
(such as shooting still subjects and following
shots).
2.
Aspherical and
UD
lens elements result
in
outstanding image delineation.
3.
The zoom ring can
be
fixed to keep the lens
at
the shortest point.
4.
A truly round aperture hole resultsina nicer
background blur.
* Based
on
[1/(focallength x 1.6)] second. Generally,
it
requires a shutter speed [1/focal length] second or
faster to prevent camera shake
(in
35mm format.
With
an
EF-S lens,itwould
be
[1/(focal length x
1.6)] second).
Supplementary notes
on
using the lens
and taking pictures.
ENG-1
6 Safety Precautions
1.
Do
not look at the sun or a bright light source
through the lens or camera. Doing
so
could
result
in
loss of vision. Looking at the sun directly
through the lens is especially hazardous.
2.
Whetheritis
attached to the camera or not, do
not leave the lens under the sun without the
lens cap attached. This
is
to prevent the lens
from concentrating the sun's rays, which could
cause a fire.
6 Handling Cautions
If the lensistaken from a cold environment into
a warm one, condensation may develop
on
the
lens surface and internal parts. To prevent
condensation
in
this case, first put the lens into
an
airtight plastic bag before taking it from a cold
to
warm environment. Then take out the lens after it
has warmed gradually.
Do
the same when taking the
lens from a warm environment into a cold one.
This device complies with Part15of the FCC Rules. Operation
is
subjecttothe following two conditions:
(1)
This device may not
cause harmful interference, and
(2)
this device must accept any
interference received, including interference that may cause
undesired operation.
Do
not make any changes or modificationstothe equipment
unless otherwise specifiedinthe instructions.Ifsuch changes or
modifications should be made, you couldberequired to stop
operation of the equipment.
This equipment has been tested and foundtocomply with the
limits for a class B digital device, pursuanttopart15of the FCC
Rules. These limits are designedtoprovide reasonable protection
against harmful interferenceina residential installation. This
equipment generates, uses and can radiate radio frequency
energy and,ifnot installed and usedinaccordance with the
instructions, may cause harmful interferencetoradio
communications.
However, thereisno guarantee that interference will not occur
in
a particular installation.Ifthis equipment does cause harmful
interference to radio or television reception, which can
be
determined by turning the equipment off and on, the user
is
encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radiofTV technician for
help.
This Class B digital apparatus complies with Canadian ICES-003.
ENG-2
Zoom position index
(~
5)
Focus mode switch
(~
4)
IIINomenclature
..
:
...
:.;:;.:.:.;..::::;:~;::,:~::,::;:~:::.~:
Hood mount
(~
5)
------,
I
r---
---------
Filter mounting
thread
(~
9)
Focusing ring
(~
4)
---'
Zoom ring
(~
5)
---'
------_
..........
-
//A~~'
-
~
i©111111
u
®
0
...J
(
~
=
Lens mount index
(~
4)-.J
Zoom ring
lock lever
(~
6)
For detailed information, reference page numbers are providedinparentheses
(~
**).
ENG-3
o
Mounting
and
Detaching
the
Lens
:;"~'~'~:':"~"'.;:~-:'.:;:.::.::.:.;
..
,:.:
8 Setting the Focus Mode
'<"~~-:-":"::::"";':'~':~';:"'.x.:
AFI
rMF
~
To shootinautofocus (AF) mode, set the focus
mode switch to
AF.
To use only manual focusing (MF), set the focus
mode switch to MF, and focus by turning the
focusing ring.
o
*»
Do
not touch the rotating parts of the lens while
autofocus is active.
*»
Do not adjust focus manually when the focus
mode switch is set to AF.
@ After detaching the lens, place the lens with the
rear end up to prevent the lens surface and
electrical contacts from getting scratched.
@
If
the contacts get soiled, scratched, or have
fingerprints
on
them, corrosion or faulty
connections can result. The camera and lens
may not operate properly.
@ If the contacts get soiled or have fingerprints
on
them, clean them with a soft cloth.
@ If you remove the lens, cover it with the dust
cap. To attach it properly, align the lens mount
index and the
0 index of the dust cap as shown
in
the diagram, and turn clockwise. To remove
it,
reverse the order.
See
your
camera's instructions
for
details on
mounting and detaching the lens.
ENG-4
oHood (Sold Separately)
The EW-78D hood can keep unwanted light out
of the lens, and also protects the lens from rain,
snow, and dust.
To attach the hood, align the hood's attachment
position mark with the
red
dot
on
the front of the
lens, then turn the hood as shown by the arrow
until the lens'
red
dotisaligned with the hood's
stop position mark.
The hood can
be
reverse-mounted
on
the lens
for storage.
o .¢' Part of the picture may
be
blocked if the hood is
not attached properly.
¢'
When attaching or detaching the hood, grasp
the base of the hood to turn
it.
To prevent
deformation, do not grasp the
rim
of the hood to
turn
it.
ENG-S
To zoom, turn the lens' zoom ring.
o
Be
sure to finish zooming before focusing.
Changing the zoom ring after focusing can affect
the focus.
Loading...