Film Indicator Window
(as well as film counter)
Viewfinder Eyepiece
Mercury Battery Chamber
-ASA Sensitivity Change Pin
Film Feed Control Lever
Flash Battery Chamber
Back Cover Lock
Tripod Socket
^ :.;ADINU or f\/ERCUKY B^TTbRiES
Insert the mercury battery, which comes in
a separate envelope, into the battery cham
ber. The mercury battery is the power source
for the EE meter. If the battery is not
inserted the electric eye will not function.
Open the back cover. Push the back
cover lock in the direction of the arrow
and the back cover will open.
Pull out the mercury battery case.
"I Insert the mercury battery into the
battery case, as indicated on the case,
without mistaking the ( + ) and (-) poles.
/1 Push the battery loaded case Into the
mercury battery chamber with the ( —)
side on top. The EE meter will not function
properly if the battery case is inserted in
correctly.
* Use only MD type (Mallory RM 625,
Eveready E 625, General No. 625) mer
cury batteries. These mercury batteries
have a service life of approximately one
year.
* Be careful not to leave sweat or finger
prints on the mercury batteries. Wipe
them thoroughly with a dry cloth before
loading. Longer service life of the mer
cury batteries can be maintained by re
moving them from the camera and storing
them in a dry place when not using the
camera for a long period of time.