Canon A-ODW5C Specsheet

218

[8.583]

[7.087]

0.791 20

180

[5.5]

139.8

[2.0]

50.8

[3.504]

[2.165]

0.5

12.7

[3.268]

1.815

[0.394]

9.685 246

[14.055]

357

283.5

[11.162]

365.5

[14.390]

：

[ inch ]

2.953

R75

[8.740]

φ222

Outdoor Dome Housing

2 = Type 24VAC Blower and heater installed 12 = Type 12VDC Blower and heater installed

Capsule

C = Clear T = Tinted

A-ODW5

After 7 digits shows optional specifications6 digits registered model name(UL & PSE)

Specifications

Operating Environment Operating Temperature IP Rate

Max Wind Load

Housing

Capsule

Mounting Bracket

Weight Recommended Screw Heater (Optional)

Blower (Optional)

Fuse Standard & Compliance

＊1 Due to size and specification of camera splitter may not be installed in housing. ＊2 As regards the specification of both Splitter and Midspan, you are requested to obtain our confirmation in advance before ordering. ＊3 "Optional" Two-Coat system comprises 1coat = powder coating primer(Epoxy base) and Top coat = UV resistant (Polyester base) powder coating based on our standard.

Outdoor

-20˚C (-4˚F) ～ +40˚C (+104˚F) under normal outdoor environment. IP54 (Vent Holes "Open") IP66 (Vent Holes "Closed" with provided Rubber) Products will not be destroyed by maximum 50m/sec (167 ft/sec) wind load. *Safety of 50m/sec (167 ft/sec) was confirmed by actual wind load test.  *Safety of 60m/sec (200 ft/sec) was confirmed by our factory test data. Material = PC/ABS UL94 V-0 Standard Color : Silver (Housing Top = Aluminum) Optional Color : (OW) = Off-White (RAL9002 Similar) Optional Color : (DB) = Dark Brown (Munsell 5YR2/1.5 Similar) *Vandal Resistant M4 Screws x 7 pcs. & Tool Set Model A-VSM4TL is optional. Material = PC UL 94 V-0 Light Loss : C = Clear = Almost zero T = Tinted = Approx. 60% Wall Mount W type Material = Aluminum Powder Coat Finish Standard Color : Black for Standard Silver Color Housing. Optional Color : (OW) = Off-White (RAL9002 Similar) Optional Color : (DB) = Dark Brown (Munsell 5YR2/1.5 Similar) Approx. 3.9kgs (8.6 lbs) 3/8" or M8～M10 Stainless Screws x 4 (Not included in product) 2 = 24VAC 25W 12 = 12VDC 25W Standard (Optional 6W/12W) 12 (POE) 12 (POE+M) = 12VDC Input 25W Standard (Optional 6W/12W) Optional extreme cold area -20˚C (-4˚F) ～ 60˚C (-76˚F) Standard 24VAC/12VDC 25W + Additional 24VAC/12VDC 25W = Total 24VAC/12VDC 50W Auto by thermostat 4.4˚C (40˚F) = ON 16˚C (60˚F) = OFF 2 = 24VAC Input 12 = 12VDC Input 12 (POE) 12 (POE+M) = 12VDC Input Manufacturer : Nidec Servo Corporation Model EUDC12D8 DC12V 0.04A 0.5W x 2 units are installed for both 24VAC/12VDC blower type. Auto by thermostat 35˚C (95˚F) = ON 27˚C (80˚F) = OFF 125V 5A(Size 5.2 x 20mm) for 24VAC Blower & Heater(Extra 1 pc. is provided.) No fuse for 12VDC Blower & Heater. RoHS, UL (File#E313815), CE

12(POE) = Type 12VDC Blower, heater and PoE Splitter installed in housing ＊1, ＊2 12(POE+M) = Type 12VDC Blower, heater and PoE Splitter installed in housing and Midspan are packed in product box. ＊1, ＊2

Housing Color

Nothing = Standard (Silver)

(OW) = Off-White

(DB) = Dark Brown

"Optional" Two-Coat system for Metal Parts(Bracket) for corrosion protection＊3

Nothing = Standard One Coat by UV resistant polyester powder coat

-TC = "Optional" Two-Coat