Ensure that you read the Safety Precaution s (pp. 201–209).
Workflow and Reference Guides
The following guides are available. Refer to them as necessary according to the
flowchart below.
: Contents of This Guide
Check the package contents
Getting Started (p. 7)
Explains how to complete tasks ranging from charging
batteries and installing memory cards to setting the date and
time, shooting, playing and erasing images, and performing
simple printing tasks.
Learning More (p. 37)
Names camera components and provides more detailed
instructions for shooting and playback. Lists information for
more advanced use of your camera.
Connect the camera to
other devices
• Connecting to a printer
• Connecting to a TV set
• Connecting to a computer
Getting Started Guide
Direct Print User
Guide
Softwa re Starter
Guide
Checking the Package Contents
The following items are included in the package. If something is missing,
please contact the retail outlet at which you purchased the product.
1
CameraBattery Pack NB-5L
a
Memory Card (32MB)Interface Cable IFC-400PCU
de
AV Cable AVC-DC300Wrist Strap WS-700
User Guides
i
• Getting Started Guide
• “Use of Genuine Canon Accessories
Recommended” Leaflet
• Canon Digital Camera Manuals Disk
bc
(with Terminal Cover)
Battery Charger
CB-2LX/ CB-2LXE
Canon Digital Camera
hfg
Solution Disk
European Warranty
j
System Booklet
You may not be able to achieve the full performance of this camera
with the included memory card.
You can use SD memory cards, SDHC (SD High
Capacity) memory cards, MultiMediaCards, MMCplus
cards and HC MMCplus cards in this camera. These
cards are collectively referred to as memory cards in
this guide.
Table of Contents
2
Table of Contents
Items marked with a are lists or charts that summarize camera
functions or procedures.
This mark denotes issues that may affect the
camera’s operation.
This mark denotes additional topics that complement
the basic operating procedures.
Explanations in this guide are based on the camera's default settings
at time of purchase.
6
Please Read
Test Sho ts
Before you try to photog raph important subjects, we highly recommend that you
shoot several trial images to confirm that the camera is operating and being
operated correctly.
Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are
not liable for any consequential damages arising from any malfunction of a
camera or accessory, including memory cards, that results in the failure of an
image to be recorded or to be recorded in a way that is machine readable.
Warning Against Copyright Infringement
Please note that Canon digital cameras are intended for personal use and should
never be used in a manner that infringes upon or contravenes international or
domestic copyright laws and regulations. Please be advised that in certain cases
the copying of image s from performances, exhibitions, or commercial properties
by means of a camera or other device may contravene copyright or other legal
rights even if the image was shot for personal use.
Warranty Limitations
For information on your camera's warranty, please refer to the Canon European
Warranty System (EWS) Booklet supplied with your came ra.
For Canon Customer Support contacts, please see the European Warranty
System (EWS) Booklet.
Camera Body Temperature
If your camera is used for prolonged periods, the camera body may become
warm. Please be aware of this and take care when operating the camera for an
extended period.
About the LCD Monitor
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification. Less than
0.01% of the pixels may occasionally misfire or appear as red or black dots.
This has no effect on the recorded image and does not constitute a malfunction.
Video Format
Please set the camera's video signal format to the one used in your region before
using it with a TV monitor.
Language Setting
Please see Setting the Display Language(p. 13) to change the language setting.
Getting Started
z Preparations
z Shooting Still Images
z Viewing Still Images
z Shooting Movies
z Viewing Movies
z Erasing
z Printing
z Downloading Images to a Computer
z System Map
Preparations
8
Preparations
Charging the Battery
1. Insert the battery into the battery charger.
Align these symbols
Getting Started
2. Plug the battery charger (CB-2LX) into a power outlet,
or attach the power cord to the battery charger (CB2LXE) and plug it into a power outlet.
Battery charger model names and types vary by region.
Charge Indicator
On Charging: lights
orange
For CB-2LXFor CB-2LXE
3. Remove the battery after charging is complete.
Charging takes approximately 2 hours 5 minutes.
Charge Indicator
Charging Complete:
lights green
To protect the battery and prolong its life, do not charge it for
longer than 24 hours continuously.
Preparations
Installing the Batteryand Memory Card
1. Slide the cover and open it out (a, b).
a
2. Insert the battery.
It will lock into place with a click.
3. Insert the memory card until it clicks into place.
Front
Write Protect Tab
(Only SD memory cards)
• Confirm that the Write
Protect Tab is unlocked
(only SD memory cards).
• Check the card for the
correct orientation.
9
Getting Started
b
Ensure that the memory card is correctly oriented before
inserting it in the camera. Inserting it backward may cause the
camera to fail to recognize the memory card or to malfunction.
Preparations
10
4. Close the cover (c, d).
c
Getting Started
d
To Remove the Battery
Press the battery lock in the direction of
the arrow (
a
) and pull the battery out (b).
To Remove the Memory Card
Use a finger to push the memory card in until you hear a click, then
release it.
b
a
Attaching the Wrist Strap
It is recommended to use the Wrist Strap to avoid dropping
during camera use.
Preparations
11
Getting Started
Preparations
12
Setting the Date and Time
The Date/Time settings menu will appear the first time the power is turned
on. Set the date and time as shown in step 3 and 4 in the explanation
below.
Power Button
Getting Started
/ / / Buttons
1. Press the power button.
2. Select [Date/Time].
1. Press the button.
2. Use the or button to select
the [ (Set up)] menu.
3. Use the or button to select
[Date/Time].
4. Press the button.
Button
Button
3. Select the year, month, day and time, and the display
order.
1. Use the or button to select a
category.
2. Use the or button to set the
value.
4. Press the button.
5. Press the button.
Preparations
z A rechargeable lithium battery is built into the camera to
save such settings as the date/time. Insert a charged battery
into the camera. Or if you use the separately sold AC
Adapter Kit ACK-DC30, the battery will charge in about four
hours. It will charge even if the camera is turned off.
z The date/time settings may be lost after approximately three
weeks if you remove the main battery. Reset the date/time
settings if this occurs.
z You can imprint the date and time you have set onto images
(p. 78).
Setting the Display Language
You can change the language displayed in the LCD monitor menus
and messages.
Button
Button
/ / / Buttons
Button
1. Press the button.
2. Hold down the button and press the button.
3. Use the , , or button to select a language.
4. Press the button.
13
Getting Started
Shooting Still Images
14
Shooting Still Images
Indicators
( Auto Mode)
Power Button
Getting Started
Mode Dial
1. Press the power button.
• The start-up sound will play and the start-up image will display in
the LCD monitor.
• Pressing the power button again turns the power off.
2. Set the mode dial to (Auto).
3. Aim the camera at the subject.
Shutter Button
Button
Shooting Still Images
4. Press the shutter button lightly (press halfway) to set
the focus.
• When the camera focuses, it beeps twice and the indicator lights
green (orange when the flash fires).
Shooting Preparations
Complete: lights green
• AF frames will display in green on the
LCD monitor at the points of focus.
15
Getting Started
5. Without changing anything else,
press the shutter button all the
AF frame
way (press fully) to shoot.
• The shutter sound will play once and the image will record.
• The indicator will blink green and the file will record to the
memory card.
Recording: blinks green
Mute Setting
Pressing the DISP. button while switching on the camera power will
set the mute setting to [On] to silence all camera sounds except for
warning sounds. Setting can be changed from the [
Menu [Mute] (p. 51).
(Set up)]
Shooting Still Images
16
Reviewing an Image Right After
Shooting (Rec. Review)
Recorded images are displayed on the LCD monitor for approximately
2 seconds immediately after shooting.
Getting Started
You can also use the following methods to continue displaying the
image immediately after shooting so that you can check it.
z Keep the shutter button pressed fully.
z Press the button while the recorded image is
displayed.
Make sure the operation sound plays.
You can shoot by pressing the shutter button even when an image
is being displayed.
To stop displaying the image, press the shutter button halfway.
Shutter Button
Button
You can change the interval for which images are displayed by
configuring the [Review] item in the [ (Rec.)] menu.
Viewing Still Images
17
Viewing Still Images
Button
/ Buttons
1. Press the button.
The last recorded image will display.
2. Use the or button to display the image you wish to
view.
• Use the button to move to the
previous image and the button to
move to the next image.
• The images advance more quickly if
you keep the button pressed
continuously, but they will appear
coarse.
Getting Started
If you have replayed images, the last image viewed will display
(Resume Playback). If the memory card has been switched, or
the images on the memory card have been edited with a
computer, the newest image on the memory card appears.
18
Shooting Movies
Shooting Movies
Getting Started
Mode Dial
/ Buttons
1. Press the power button.
2. Select a shooting mode.
1. Set the mode dial to (Movie).
2. Press the button.
3. Use the or button to select
(Standard).
4. Press the button.
3. Aim the camera at the subject.
( Standard Mode)
Power Button
Shutter Button
Button
Shooting Movies
4. Press the shutter button lightly (press halfway) to set
the focus.
• An electronic beep will sound twice and the indicator will light
green when the camera focuses.
• The exposure, focus and white balance are automatically set
when you press the button halfway.
Shooting Preparations
Complete: lights green
5. Without changing anything else, press the shutter
button all the way (press fully) to shoot.
• Recording starts.
• During the recording, the elapsed
recording time and [z Rec.] will
display in the LCD monitor.
6. Press the shutter button fully
again to stop recording.
• The indicator will blink green and the
data will be recorded onto the
memory card.
• Recording will stop automatically when the maximum recording
time elapses, or the built-in memory or memory card become full.
Elapsed time
19
Getting Started
Recording: blinks green
z Do not touch the microphone while recording.
z Do not press any buttons other than the shutter button. The
sound that buttons make will be recorded in the movie.
Viewing Movies
20
Viewing Movies
Getting Started
/ / / Buttons
1. Press the button.
2. Use the or button to display a movie and press the
button.
Images with a icon are movies.
3. Use the or button to select
(Playback) and press the button.
• The movie will start playing.
• If you press the FUNC./SET button
during playback, you can pause and
restart the movie.
• You can adjust the playback volume
with the or button.
Button
Button
Erasing
21
Erasing
Button
Button
/ Buttons
Button
1. Press the button.
2. Use the or button to select an image to erase and
press the button.
3. Confirm that [Erase] is selected and press the
button.
To exit instead of erasing, select
[Cancel].
Getting Started
Please note that erased images cannot be recovered. Exercise
adequate caution before erasing an image.
Printing
22
Printing
Getting Started
/ Buttons
1.
Connect the camera to a direct print compatible printer*1.
• Slip a fingernail under the bottom edge of the terminal cover to
open it and insert the interface cable all the way into the
connector.
• See the printer’s user guide for connection instructions.
Canon Brand Printers
DIGITAL Terminal
Button
Button
SELPHY Series Compact
Photo Printers*
Inkjet Printers
*1 Since this camera uses a standard protocol (PictBridge), you can use it with other
PictBridge-compliant printers in addition to Canon-brand printers.
*2 You can also use the CP-10/CP-100/CP-200/CP-300.
2
Interface Cable
Printing
2. Turn on the printer.
3. Press the camera’s button and turn on the power.
• The button will light blue.
• A , or icon will appear in
the LCD monitor if the connection is
correct (the displayed icons differ
according to the connected printer).
• will display on movies.
4. Use the or button to select an image to print and
press the button.
The button will blink blue and printing will start.
After you finish printing, turn off the camera and the printer and
disconnect the interface cable.
Always grasp the sides of the connector when disconnecting
the interface cable from the camera's DIGITAL terminal.
23
Getting Started
Downloading Images to a Computer
24
Downloading Images to a Computer
Items to Prepare
• Camera and computer
• C anon Digital Camera Solution Disk supplied with the camera
• Interface cable supplied with the camera
Getting Started
System Requirements
Please install the software on a computer meeting the following
minimum requirements.
Windows
OSWindows Vista
Computer ModelThe above OS should be pre-installed on computers with built-
CPUWindows VistaPentium 1.3 GHz or higher
RAMWindows Vista512 MB or more
InterfaceUSB
Free Hard Disk
Space
Display1,024 x 768 pixels/High Color (16 bit) or better
Macintosh
OSMac OS X (v10.3–v10.4)
Computer ModelThe above OS should be pre-installed on computers with built-
CPUPowerPC G3/G4/G5 or Intel Processor
RAM256 MB or more
InterfaceUSB
Free Hard Disk
Space
Display1,024 x 768 pixels/32,000 Colors or better
Windows XP Service Pack 2
Windows 2000 Service Pack 4
in USB ports.
Windows XP/Windows 2000 Pentium 500 MHz or higher
Windows XP/Windows 2000 256 MB or more
• Canon Utilities
- ZoomBrowser EX200 MB or more
- PhotoStitch40 MB or more
Canon Camera TWAIN Driver
•
in USB ports.
• Canon Utilities
- ImageBrowser300 MB or more
- PhotoStitch50 MB or more
25 MB or more
Downloading Images to a Computer
Preparing to Download Images
Ensure that you install the software first before connecting the
camera to the computer.
1. Installing the software.
Windows
1. Place the Canon Digital Camera Solution Disk in the
computer's CD-ROM drive.
2. Click [Easy Installation].
Follow the onscreen messages to
proceed with the installation.
3. Click [Restart] or [Finish] once the
installation is complete.
When the installation is finished,
[Restart] or [Finish] will display. Click
the button that appears.
4. Remove the CD-ROM from the
drive when your normal desktop
screen appears.
25
Getting Started
Macintosh
Double-click the icon in the CDROM window. When the installer
panel appears, click [Install]. Follow
the onscreen instructions to
proceed.
Downloading Images to a Computer
26
2. Connecting the camera to a computer.
1. Connect the supplied interface cable to the computer's USB
port and to the camera's DIGITAL terminal.
• Slip a fingernail under the bottom edge of the terminal cover to
open it and insert the interface cable all the way into the
connector.
Getting Started
USB Port
Interface Cable
DIGITAL Terminal
3. Preparing to download images to the computer.
1. Press the camera’s button and turn on the power.
Interface Cable
Button
Always grasp the sides of the connector when disconnecting
the interface cable from the camera's DIGITAL terminal.
If the Digital Signature Not Found window appears, click [Yes].
The USB driver will automatically finish installing onto the
computer when you attach the camera and open a connection.
Downloading Images to a Computer
Windows
Select [Canon CameraWindow] and click
[OK].
If this Events dialog not appear, click the [Start] menu and
select [All Programs] or [Programs], followed by [Canon
Utilities], [CameraWindow], [CameraWindow] and
[CameraWindow].
CameraWindow will display.
Preparations for downloading images are now finished. Please
proceed to the Downloading Images Using the Camera section
(p. 29) (except Windows 2000).
27
Getting Started
With Windows 2000, you can download images using the
computer. Please refer to the Software Starter Guide for
details.
Downloading Images to a Computer
28
Macintosh
CameraWindow will appear when you establish a connection
between the camera and computer. If it fails to appear, click the
[CameraWindow] icon on the Dock (the bar which appears at the
bottom of the desktop).
Getting Started
Preparations for downloading images are now finished. Please
proceed to the Downloading Images Using the Camera section
(p. 29).
Please refer to the Software Starter Guide regarding how to
download images using the computer.
Loading...
+ 204 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.