CaHOH
_o_S_o,IXUS 310 HS
ELIF_H SO0 HS
Camera User Guide
Make sure you read this guide, including the "Safety
Precautions" section before using the camera.
Reading this guide will help ,. learn to use the camera
properly.
Store this guide use it in the future.
Checkifthefollowingitemsareincludedinyourcamerapackage.
Ifanythingismissing,contacttheretailerwhereyoupurchasedthecamera.
Camera Battery Pack NB-6L Battery Charger
interface Cable Stereo AV Cable
IFC-400PCU AVC-DC400ST
Getting Started DIGITAL CAMERA Warranty
(with Terminal Cover) CB-2LY/CB-2LYE
Wrist Strap
WS-DCI0
Solution Disk Card
Using the PDF Manuals
The following PDF manL, als are included in the Readme folder of the CD-ROM:
:; When the software is installed on your computer, the PDF manuals will be copied to
the computer and you can refer to them by clicking the shortcLlts on the desktop.
Once you have mastered the basics, use the camera's many
Camera User Guide (This Guide)
features to shoot more challenging photos.
Test Shots and Disclaimer
Take some initial test shots and play them back to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be recorded
in a way that is machine readable.
Warning Against Copyright infringement
The images recorded with this camera are intended for personal use. Do not
record images that infringe upon copyright laws without the prior permission
of the copyright holder. Please be advised that in certain cases the copying
of images from performances, exhibitions, or commercial properties by
means of a camera or other device may contravene copyright or other legal
rights even if the image was shot for personal use.
Warranty Limitations
This camera's warranty is only effective in the country of sale. If there is a
problem with the camera while abroad, please return it to the country of sale
before proceeding with a warranty claim to a Canon Customer Support Help
Desk. For Canon Customer Support contacts, please see the customer
support list supplied with your camera.
LCD Monitor (Screen)
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification, but
occasionally non-performing pixels may appear as bright or dark dots. This
is not a malfunction and has no effect on the recorded image.
The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If so, remove the film before using the
camera.
Camera Body Temperature
Please take care when operating the camera for an extended period as the
camera body may become warm. This is not a malfunction.
,ttothecamerato iYii!_!i_ii:ii:!i:i_i_!_i!_i!_i_i_i!_ii_i!_ii_i_!_i_ii!iiiii!iii_iiiii!i!_i_i_iiiiiii!i!_i!!!i!_!!!!!_i!i_!_i_i_i_i_!_!_!_!_
aving make settings ........ ..............5
(p. 69) (p. 70) (p. 75)
[ Effect Super _i i8 colors
(p. 71) (p. 68) (p. 68)
Miniat_#6 Effect Toy Camera Effect
Men8 _r_me
(p. 74)
Focus on faces .................................................................. 25, 64, 95
Shoot in places where I cannot use the flash
(turn off the flash) ......................................................................... 54
Take pictures with me in them too (self-timer) ................. 58, 59, 78
Insert the date and time into my shots ......................................... 57
Take a picture while shooting a movie ......................................... 67
4
What Do You Want to Do?
Look at my pictures .................................................... ..... i...._8
Automatically play back pictures (slideshow) ............. i_4
Look at my pictures on a TV ...................................................... 133
Look at my pictures on a computer .............................................. 34
Quickly search pictures .............................................................. 120
Erase pictures ...................................................................... 30, 139
Shoot movies ....................................................................... ;31 11
View movies ...................................................................... .......33
Shoot fast moving subjects and play them back
in slow motion ............................................................................ 114
Easily print pictures
:/
........Save images to a computer ........................................
Understand what is displayed on the screen ............................. 187
5
Chapters 1 - 3 explain the basic operations and frequently used functions of
this camera. Chapters 4 onward explain the advanced functions, letting you
learn more as you read each chapter.
Checking the Package Contents .......2
Read This First .................................. 3
What Do You Want to Do? ................ 4
Table of Contents .............................. 6
Conventions Used in This Guide ....... 9
Safety Precautions ........................... 10
Using the Touch Panel .................... 14
Charging the Battery ........................ 15
Compatible Memory Cards
(Sold Separately) ........................... 17
Inserting the Battery and
Memory Card ................................. 17
Setting the Date and Time ............... 20
Setting the Display Language .......... 22
Formatting Memory Cards ............... 23
Pressing the Shutter Button ............. 24
Taking Pictures (Smart Auto) ........... 25
Viewing Images ............................... 28
Active Display .................................. 29
Erasing Images ................................ 30
Shooting Movies .............................. 31
Viewing Movies ................................ 33
Transferring Images
to a Computer for Viewing ............. 34
Accessories ..................................... 38
Separately Sold Accessories ........... 39
Components Guide .......................... 42
Screen Display ................................. 44
Indicator ........................................... 45
FUNC. Menu - Basic Operations.... 46
MENU - Basic Operations .............. 47
Changing the Sound Settings ......... 49
Adjusting the Screen Brightness ..... 50
Returning the Camera to Default
Settings ......................................... 51
Power Saving Function
(Auto Power Down) ....................... 52
Turning the Flash Off ...................... 54
Zooming in More Closely on
Subjects (Digital Zoom) ................. 55
Inserting the Date and Time ............ 57
Using the Self-Timer ....................... 58
Changing the Recording Pixel
Setting (Image Size) ..................... 60
Changing the Compression Ratio
(Image Quality) ............................. 60
Shooting in Various Conditions ....... 64
Making Short Movies Automatically
(Movie Digest) ............................... 67
Adding Effects and Shooting ........... 68
Detecting a Face and Shooting
(Smart Shutter) ............................. 76
High-Speed Continuous Shooting
(High-speed Burst) ........................ 80
Capturing the Best Facial
Expressions (Best Image
Selection) ...................................... 81
Table of Contents
Shooting in Program AE ................. 84
Adjusting the Brightness
(Exposure Compensation) ............ 85
Turning the Flash On ...................... 85
Adjusting the White Balance ........... 86
Changing the ISO Speed ................ 88
Correcting the Brightness and
Shooting (i-Contrast) ..................... 89
Changing the Aspect Ratio ............. 90
Continuous Shooting ....................... 91
Changing the Tone of an Image
(My Colors) ................................... 92
Shooting Close-ups (Macro) ........... 94
Shooting Far Away Subjects
(Infinity) ......................................... 94
Changing the AF Frame Mode ........ 95
Magnifying the Focal Point .............. 97
Choosing the Subject to
Focus On (Touch AF) ................... 98
Shooting with the AF Lock .............. 99
Shooting with Servo AF ................ 100
Changing the Metering Method ..... 101
Shooting with the AE Lock ............ 102
Shooting with the FE Lock ............ 102
Shooting with Slow Synchro ......... 103
Red-Eye Correction ...................... 104
Checking for Shut Eyes ................ 105
Setting the Shutter Speed ............. 108
Setting the Aperture Value ............ 109
Shooting Various Kinds of
Movies ......................................... 112
Shoot Movies That Look Like a
Miniature Model (Miniature
Effect) .......................................... 113
Shooting Super Slow Motion
Movies ......................................... 114
Changing the Image Quality .......... 116
Other Shooting Functions .............. 117
Editing ........................................... 117
Quickly Searching Images ............. 120
Viewing Images in Filtered
Playback ...................................... 123
Viewing Slideshows ....................... 124
Checking the Focus ....................... 126
Magnifying Images ........................ 127
Viewing Each Image in a Group.... 128
Displaying Various Images
(Smart Shuffle) ............................ 130
Changing Image Transitions ......... 131
Easy Operations with Touch
Actions ........................................ 131
Viewing Images on a TV ............... 133
Protecting Images ......................... 137
Erasing All Images ........................ 139
Tagging Images as Favorites ........ 141
Organizing Images by Category
(My Category) ............................. 143
Rotating Images ............................ 144
Resizing Images ............................ 145
Trimming ....................................... 146
TableofContents
Adding Effects with the My Colors
Function ....................................... 148
Correcting the Brightness
(i-Contrast) ................................... 149
Correcting the Red-Eye Effect ....... 150
Printing Images .............................. 152
Choosing Images for Printing
(DPOF) ........................................ 159
Changing Camera Settings ............ 164
Changing Shooting Function
Settings ........................................ 171
Changing Playback Function
Settings ........................................ 176
Using Household Power ................ 178
Using an Eye-Fi Card .................... 179
Troubleshooting ............................ 181
List of Messages That Appear
on the Screen .............................. 184
Information Displayed
on the Screen .............................. 187
Handling Precautions .................... 191
Functions Available in Each
Shooting Mode ............................ 192
Menus ........................................... 196
Playback Mode FUNC. Menu ........ 200
Specifications ................................ 201
Index ............................................. 205
Iconsareusedinthetexttorepresentthecamerabuttonsandswitches.
Languagethatdisplaysonthescreenappearsinside[](squarebrackets).
(_):Thingsyoushouldbecarefulabout
@:Troubleshootingtips
:Hintsforgettingmoreoutofyourcamera
:Supplementalinformation
(p.xx):Referencepages("xx"standsforapagenumber)
Thisguideassumesallfunctionsareattheirdefaultsettings.
Thevarioustypesofmemorycardsthatcanbeusedinthiscameraare
collectivelyreferredtoasmemorycardsinthisguide.
Before using the product, please ensure that you read the safety precautions described
below. Always ensure that the product is used correctly.
The safety precautions noted on the following pages are intended to prevent injuries to
yourself and other persons, or damage to the equipment.
Be sure to also check the guides included with any separately sold accessories you
use.
Do not trigger the flash in close proximity to people's eyes.
Exposure to the intense light produced by the flash could damage eyesight. In particular,
remain at least one meter (39 inches) away from infants when using the flash.
this ofchiid_enandinfantsi ................................................
Strap: Putting the strap around a child's neck could result in asphyxiation.
Use only recommended power sources.
Do not attempt to disassemble, alter or apply heat to the product.
Avoid dropping or subjecting the product to severe impacts.
To avoid the risk of injury, do not touch the interior of the product if it has been
dropped or otherwise damaged.
Stop using the product immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
Do not use organic solvents such as alcohol, benzine, or thinner to clean the
equipment.
Do not let the product come into contact with water (e.g. sea water) or other
liquids.
Do not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire.
If liquids or foreign objects come into contact with the camera interior, immediately turn
the camera power off and remove the battery.
If the battery charger becomes wet, unplug it from the outlet and consult your camera
distributor or a Canon Customer Support Help Desk.
Use only the recommended battery.
Do not place the battery near or in direct flame.
Unplug the power cord periodically, and using a dry cloth, wipe away any dust
and dirt that has collected on the plug, the exterior of the power outlet, and the
surrounding area.
Do not handle the power cord with wet hands.
Do not use the equipment in a manner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are
damaged, or not fully plugged into the outlet.
Do not allow dirt or metal objects (such as pins or keys) to contact the terminals
or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could cause
injury and damage the surroundings. In the event that a battery leaks and the battery acid
contacts eyes, mouth, skin or clothing, immediately flush with water.
10
Safety Precautions
Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of
electronic instruments and other devices. Exercise adequate caution when using the
camera in places where use of electronic devices is restricted, such as inside airplanes
and medical facilities.
CD=ROMs.
It is possible to suffer hearing loss from listening with headphones to the loud sounds of
a CD-ROM played on a music CD player. Additionally, playing the CD-ROM(s) in an audio
CD player (music player) could damage the speakers.
Be careful not to bang the camera or subject it to strong impacts or shocks when
hanging it by the strap.
Be carefu_ not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
This could result in burns or damage to the flash.
- Places subject to strong sunlight
-PIaces subject to temperatures above 40 °C (104°F)
- Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery, resulting in
electrical shock, fire, burns or other injuries.
High temperatures may cause deformation of the camera or battery charger casing.
prolonged periods.
Do not aim the camera at bright light sources (such as the sun on a clear day).
Doing so may damage the image sensor.
dust or sand to enter the camera.
This may cause the product to malfunction.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the
front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from
the flash to prevent heat build-up and damage to the unit.
11
Safety Precautions
Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
Before you discard the battery, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
when you are not using it.
Do not place anything, such as cloth on top ofthe battery charger while it is
charging.
Leaving the unit plugged infor a long period of time may cause it to overheat and distort,
resulting in fire.
Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or
damage.
6_noi;ii aownwiihth; c_a inyourpo_ke_: ....................................................
Doing so may cause malfunctions or damage the screen.
When putting the camera in your bag, ensure that hard objects do not come into
contact with the screen.
Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.
12
Getting Started
This chapter exp,ains preparations before shooting, how to shoot in
mode, and then how to view and erase the images you take. The
latter part of this chapter explains how to shoot and view movies and
transfer images to a computer.
Attaching the Strap/Holding the Camera
Attach the included strap and wrap it around your wrist to avoid dropping
the camera during use.
Keep your arms tight against your body while holding the camera firmly by
the sides when shooting. Be sure that your fingers do not block the flash or
touch the screen.
Strap
13
This camera has a touch panel screen that allows you to perform operations
with the touch of your finger.
Touch
Briefly touch the screen with your
finger.
Used for choosing icons or magnifying
images.
Drag
Touch and drag your finger across
the screen.
Used for playback operations such as
switching to the next image, or moving the
displayed location of magnified images.
When touching with your finger does not work well,
you can use the toggle attached to the strap to
perform operations. Only use the attached toggle to
perform operations. Do not use other objects, such
as pens or pencils.
You can calibrate the touch panel if you are having
difficulty choosing items or buttons (p. 170).
14
Use the included charger to charge the battery. Be sure to charge the battery
as it is not charged at the time of purchase.
.... Removethecover.
insert the battery.
Align the A marks on the battery and
i i iiiii!iiil;iiiiii!ii!i!!ii!il
charger, then insert the battery by sliding it
" i
in ((_)) and down ((_).
Charge the battery.
For CB-2LY: Flip out the plug ((_) and
plug the charger into a power outlet (@).
For CB=2LYE: Plug the power cord into
the charger, then plug the other end into a
power outlet.
The charge lamp lights red and charging
starts.
The charge lamp will light green when
charging has finished. Charging takes
approx. 1 hour and 55 minutes.
Remove the battery.
Unplug the battery charger from the power
outlet, then remove the battery by sliding it
in ((_) and up ((_)).
15
Charging the Battery
Number of Possible Shots
Appiox i80
The number of shots that can be taken is based on the Camera & Imaging Products
Association (CIPA) measurement standard.
Under some shooting conditions, the number of shots that can be taken may be less
than mentioned above.
Approx. 4 hours
Battery Charge indicator
An icon or message will appear on the screen indicating the battery's charge
state.
Sufficient charge.
(Blinking red) Nearly depleted. Charge the battery.
"Change the battery pack." Depleted. Recharge the battery.
Charge the battery on the day, or the day before, it will be used.
Charged batteries continue to discharge naturally even if they are not used.
=--/=_-.......... Attach the cover to a charged battery so that
the A mark is visible.
How to store the battery for long periods:
Deplete and remove the battery from the camera. Attach the terminal cover and
store the battery. Storing a battery for long periods of time (about a year) without
depleting it may shorten its life span or affect its performance.
The battery charger can also be used when abroad.
The charger can be used in regions that have 100 - 240 V (50/60 Hz) AC power.
If the plug does not fit the outlet, use a commercially available plug adapter. Do
not use electrical transformers for foreign travel as they will cause damage.
The battery may develop a bulge.
This is a normal characteristic of the battery and does not indicate a problem.
However, if the battery bulges to the point where it will no longer fit into the
camera, please contact a Canon Customer Support Help Desk.
If the battery is quickly depleted even after charging, it has reached the end of
its life span. Purchase a new battery.
16
The cards below can be used without restrictions on their capacities.
SD memory cards*
SDHC memory cards*
SDXC memory cards ,5"_*
MultiMediaCards
MMCplus memory cards
HC MMCplus memory cards
Eye-Fi Cards
This memory card complies with the SD standards. Some cards may not operate
properly depending on the brand of card used.
About Eye=Fi Cards
This product is not guaranteed to support Eye-Fi card functions (including
wireless transfer). In case of an issue with an Eye-Fi card, please check with
the card manufacturer.
Also note that an approval is required to use Eye-Fi cards in many countries
or regions. Without approval, use of the card is not permitted. If it is unclear
whether the card has been approved for use in the area, please check with
the card manufacturer.
Insert the included battery and a memory card (sold separately).
Check the card's write=protect tab.
If the memory card has a write-protect tab,
you will not be able to record images if the
tab is in the locked position. Slide the tab
up until you hear a click.
Openthecover.
Slide the cover ((_)) and open it ((_)).
17
inserting the Battery and Memory Card
Insert the battery.
Press the battery lock in the direction of the
arrow, then insert the battery as shown
until it locks into place with a click.
Be sure to insert the battery in the correct
direction or it will not properly lock into
place.
Terminals Battery
lock
Insert the memory card.
Insert the memory card as shown until it
locks into place with a click.
Be sure the memory card is oriented
correctly. Inserting the memory card in the
wrong direction could damage the camera.
Terminals
Close the cover.
Close the cover (1_ ), and press downward
as you slide it until it clicks into place (@).
SD, SDHC, SDXC memory cards, and Eye-Fi cards have a write-protect tab. If
this tab is in the locked position, [Memory card locked] will appear on the screen
and you will not be able to take or erase images.
18
No.o. °gt,oBatterya.dMomoryCa.d
Removing the Batte_ and Memory Card
Remove the battery.
Open the cover and press the battery lock
in the direction of the arrow.
The battery will pop up.
Remove the memory card.
Push the memory card in until you hear a
click, then slowly release it.
The memory card will pop up.
Number of Shots per Memory Card
Values are based on the default settings.
Approx. 123! Approx. 5042
The number of shots that can betaken wil! vary depending on camera settings, the
subject and the memory card used.
You can oheck the number of shots that can be taken when the camera is in a
Shooting mode (p. 25).
Number of shots that can be taken
19
The Date/Time settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
.....Turn on the camera.
Press the power button.
The Date/Time screen will appear.
Set the date and time.
Touch the option you want to set.
Av will appear.
Touch ,_'_ to set a value.
Complete the setting.
Touch _.
Once the date and time have been set, the
Date/Time screen will close.
Pressing the power button will turn off the
camera.
Set the correct date and time. If you have not set the date and time, the Date!Time
screen will appear each time you turn on the camera.
If you touch _F in Step 2 and then choose _o,.'-,you will set the time to daylight
saving (1 hour ahead).
2O
iiiiiiiii_
iiiiiiiii_
iiiiiiiii_
iiiiiiiii_
Changin 8 the Date and Time ii!_i................................................................................................................................
You can change the current date and time settings.
::!i;!iiiiiiiiii_Dispiaythe menu.
After touching FUN(:.,touch MENU.
Choose [Date/Time].
Touch the _1' tab.
Drag up or down the screen to choose
[Date/Time].
Touch [Date/Time].
.... Change the date and time.
Follow Steps 2 and 3 on p. 20 to adjust the
setting.
Touch _[Z)twice to close the menu.
The camera has a built-in date/time battery (backup battery) that allows the
date/time settings to be retained for about three weeks after the battery pack
has been removed.
By inserting a charged battery or connecting an AC adapter kit (sold separately,
p. 39) the date/time battery can be charged in about 4 hours even if the camera
is not turned on.
If the date/time battery is depleted, the Date/Time screen will appear when you
turn the camera on. Follow the steps on p. 20 to set the date and time.
21
You can change the language that displays on the screen.
.....Enter Playback mode.
Press the [] button.
Display the settings screen.
Touch and hold MENU.
The settings screen will appear.
setthed sp ay anguage.
Touch a display language, then touch :_2:).
Once the display language has been set,
the settings screen will close.
When there are images on the memory card, touch FUN(::. on the lower left of the
screen to display MENU.
22
Before you use a new memory card or one that has been formatted in other
devices, you should format the card with this camera. Formatting (initializing) a
memory card erases all data on the memory card. As you cannot retrieve the
erased data, exercise adequate caution before formatting the memory card.
Before formatting an Eye-Fi card (p. 179), be sure to install the software
contained on the card to a computer.
Display the menu.
Touch FUNC.,then touch MENU.
Choose[Format].
Touch the _1' tab.
Drag up or down the screen to choose
[Format].
Touch [Format].
.... Choose [OK].
Touch [OK].
A confirmation screen will appear.
Formatthe memorycard.
Touch [OK].
The memory card will be formatted.
23
Pressing the Shutter Button
Complete formatting.
When formatting ends, [Memory card
formatting complete] will appear on the
screen.
Touch [OK].
To take images that are in focus, be sure to first press the shutter button
lightly (halfway) to focus, then press fully to shoot.
Press halfway (Press lightly to focus),
Press lightly until the camera beeps twice
and AF frames appear where the camera
focused.
The camera plays the shutter sound and
Pressfullycp,_,,fu,ytoshoot).
takes the shot.
..........................................................................................................................................................................Since the shot is being taken while the
shutter sound plays, be careful not to move
the camera.
24
Taking Pictures (Smart Auto)
Since the time required to shoot differs depending on the scene you want to
take, the length of the shutter sound may change.
If the camera or subject moves while the shutter sound is playing, the recorded
image may be blurry.
Since the camera can determine the subject and shooting conditions, you can
let it automatically select the best settings for the scene and just shoot. The
camera can also detect and focus on faces, setting the color and brightness
to optimal levels.
............................................................................................................................................................................Turn on the camera.
The start-up screen will appear.
Press the power button.
Enter mode.
Set the mode switch to q_).
When you point the camera toward the
subject, the camera will make a slight
noise as it determines the scene.
The icon for the determined scene will
appear in the upper left of the screen.
The camera will focus on detected
subjects and display frames on them.
Black bars will appear on the sides of the
screen. These areas will not be recorded
when shooting.
25
Taking Pictures (SmartAuto)
Zoom bar
AF Frame
i
Compose the shot.
Moving the zoom lever toward E_-]
(telephoto) will zoom in on your subject,
making it appear larger. Moving the lever
toward [] (wide angle) will zoom out from
your subject, making it appear smaller.
(The zoom bar showing the zoom position
appears on the screen.)
Focus.
Press the shutter button halfway to focus.
When the camera focuses, it will beep
twice and AF frames will appear where the
camera focused.
Several AF frames will appear when the
camera focuses on more than one point,
Shoot.
Press the shutter button fully to shoot.
The camera will play the shutter sound and
shoot. The flash will automatically fire in
low fight conditions.
The image will appear on the screen for
approximately two seconds.
You can take a second picture even while
an image is displayed by pressing the
shutter button again.
What if the color and brightness of the images do not turn out as
expected?
The scene icon (p. 188) that appears on the screen may not match the actual
scene. If this happens, try shooting in p mode (p. 83).
26
Taking Pictures (Smart Auto)
What if white and gray frames appear when you point the camera toward
a subject?
A white frame appears on the face or subject that the camera detected as the
main subject, while gray frames appear on other detected faces. The frames will
follow the subjects within a certain range.
If the subject moves, however, the gray frames will disappear, leaving only the
white frame.
What if a frame does not appear on the subject you want to shoot?
The subject may not be detected, and frames may appear on the background.
If this happens, try shooting in p mode (p. 83).
What if a blue frame appears when you press the shutter button halfway?
A blue frame appears when a moving subject is detected; the focus and
exposure will continuously adjust (Servo AF).
What if a flashing _ appears?
Attach the camera to a tripod so that the camera does not move and blur the
image.
What if the image comes out dark even if the flash fired when shooting?
The subject is too far away for the flash to reach. The effective flash range is
approximately 50 cm - 5.0 m (1.6 - 16 ft.) at maximum wide angle (1_), and
approximately 50 cm - 2.0 m (1.6 - 6.6 ft.) at maximum telephoto ([-_).
What if the camera beeps once when the shutter button is pressed halfway?
Your subject may be too close. When the camera is at maximum wide angle
([]), move about 3 cm (1.2 in.) or more away from your subject and shoot.
Move about 40 cm (1.3 ft.) or more away when the camera is at maximum
telephoto (F_).
What if the mamp Hghts when the shutter button is pressed haffway?
To reduce red-eye and to assist in focusing, the lamp may light when shooting
in dark areas.
What if the ,_ icon blinks when you try to shoot?
The flash is charging. You can shoot when recharging ends.
What if ND appears when the shutter button is pressed halfway?
When you press the shutter button halfway in extremely bright shooting
conditions, ND will appear and the brightness will automatically adjust to
appropriate levels.
The icon for the determined scene will appear in the upper left of the screen. For
details on the icons that appear, see "Scene Icons" (p. 188).
27
Viewing images
After touching the subject and displaying ", the focus and exposure will be
maintained where the blue AF frame appears when you press the shutter button
halfway (Servo AF). Press the shutter button fully to shoot.
You can view the images you have taken on the screen.
.... Enter Playback mode.
Press the [] button,
The last image you took will appear.
Choose an image.
Dragging left to right across the screen will
cycle through the images in the reverse
order they were taken, from the newest
image to the oldest.
Dragging right to left across the screen will
cycle through images in the order they
were taken, from oldest to newest.
If you touch the left edge of the screen
(inside frame (_ on the screen at the left),
4 will appear and images will display in the
reverse order they were taken, from the
newest image to the oldest.
If you touch the right edge of the screen
(inside frame (_) on the screen at the left),
), will appear and images will display in the
order they were taken, from oldest to
newest.
The images change more quickly if you
touch and hold ,_.
The lens will retract after approximately 1
minute elapses.
28
Active Display
Pressing the [] button again while the
lens is retracted will turn off the power.
.... ......................................................@
Pressing the shutter button halfway while in Playback mode switches the camera
to Shooting mode.
When an image is displayed, lightly tapping the camera as shown below will
switch to the next image.
Switch to next image
If you touch and hold 4 on the left of the screen and tilt
the camera as shown while switching through images
(p. 28), the images advance quickly. Tilt the camera in
the opposite direction while holding _.
Switch to previous image
29
You can choose and erase images one at a time. Please note that erased
images cannot be recovered. Exercise adequate caution before erasing an
image.
.....Enter Playback mode.
Press the [] button.
The last image you took will appear.
Choose an image to erase.
Drag across the screen to choose an
image.
....Erasethe mage.
After touching FUN(:., drag up or down the
screen to choose _, then touch the menu
item again.
[Erase?] appears on the screen.
Touch [Erase].
The displayed image will be erased.
To exit instead of erasing, touch [Cancel].
3O