Campbell Hausfeld 2Z363F User Manual
Repair Parts Manual 2Z363F
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product
described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in
personal injury and/or property damage! Retain instructions for future reference.
Speedaire® General
Purpose Spray Gun
Refer to Form 5S6326 for General Operating and Safety Instructions
For Warranty & Service call 1-888-606-5587
Do Not Return To Branch
Description
The 2Z363F spray gun is a general purpose spray gun which handles all types of
paints and materials. It can be converted for use with a separate pressure paint
tank. Ideal for spraying small objects and doing detail work.
E
N
G
L
I
S
H
Figure 1
Specifications
Model Air Required SCFM @ 40 psi Max. Inlet Air Pressure Fluid Nozzle I.D. Pattern size Feed Type
2Z363F 2.0 Average 4.0 Continuous 50 psig 0.049 inches
Mix Type Bleed Type Air Inlet Fluid Inlet
Internal /
External
Bleeder / Non-bleeder 1/4 NPS (M) 3/8 NPS (M) Zinc Plated Steel Stainless Steel
(1.2 mm)
6.5 inches @ 40 psi
(8 inches distance from
work piece)
Fluid Nozzle
Material
Pressure / Siphon
Fluid Needle
Material
E
S
P
A
Ñ
O
L
F
R
A
N
Ç
A
I
S
Form 5S6324
Printed in China
09666
1208/540/VCPVP
IN234202AV 12/08
Speedaire Repair Parts Manual
For Repair Parts, call 1-800-323-0620
24 hours a day – 365 days a year
Please provide following information:
- Model number
- Serial number (if any)
- Part description and number as shown in parts list
E
N
G
L
I
S
H
2Z363F
Figure 2 – Repair Parts Illustration
* 3/8 inch (9,5 mm) NPS (M)
2
Speedaire Repair Parts Manual
Model 2Z363F
Repair Parts List
Reference Part
Number Description Number Quantity
1 Gun body assembly -- 1
2 Snap retaining ring
3 Trigger pin
4 Fluid needle assy.
5 Air cap lock ring
6 Air cap (internal mix)
7 Air cap (external mix)
8 Fluid tip
9 1-1/32 x 7/32 inch O-ring
10 Spring
11 Fluid control knob
12 Valve piston
13 3/8 x 1/4 inch O-ring
14 7/16 x 5/16 inch O-ring
15 Spring
16 1-1/16 x 7/8 inch O-Ring
17 Packing
18 Packing nut
19 Canister cover assembly -- 1
20 5-40 x 1/8 inch Socket hd. setscrew
21 Canister gasket (pkg. of 3) DH420400AV
22 Material tube DH065700AV 1
23 Air Inlet 1/4 NPS (M) HF001800AV 1
24 Trigger DH011800AV 1
25 Canister DH054001AV 1
26 Fluid hose adapter DH006900AV 1
27 1/16 inch Hex Allen wrench -- 1
REPAIR AND MAINTENANCE KITS AVAILABLE
s Gasket kit DH420100AV
n Fluid control kit DH420200AV
l Air cap kit DH420300AV
-- Not Available
s 2
s 1
n 1
l 1
l 1
l 1
n 1
s 2
n 1
n 1
n 1
s 1
s 1
n 1
s 1
n s 1
n 1
n 1
s 1
E
N
G
L
I
S
H
3
Speedaire Repair Parts Manual
Speedaire® General Purpose Spray
Gun
LIMITED WARRANTY
E
DAYTON ONE-YEAR LIMITED WARRANTY. SPEEDAIRE® GENERAL PURPOSE SPRAY GUN, MODELS COVERED IN THIS
N
MANUAL, ARE WARRANTED BY DAYTON ELECTRIC MFG. CO. (DAYTON) TO THE ORIGINAL USER AGAINST DEFECTS IN
G
WORKMANSHIP OR MATERIALS UNDER NORMAL USE FOR ONE YEAR AFTER DATE OF PURCHASE. ANY PART WHICH IS
L
DETERMINED TO BE DEFECTIVE IN MATERIAL OR WORKMANSHIP AND RETURNED TO AN AUTHORIZED SERVICE LOCATION,
I
AS DAYTON DESIGNATES, SHIPPING COSTS PREPAID, WILL BE, AS THE EXCLUSIVE REMEDY, REPAIRED OR REPLACED AT
S
DAYTON’S OPTION. FOR LIMITED WARRANTY CLAIM PROCEDURES, SEE “PROMPT DISPOSITION” BELOW. THIS LIMITED
H
WARRANTY GIVES PURCHASERS SPECIFIC LEGAL RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION.
LIMITATION OF LIABILITY. TO THE EXTENT ALLOWABLE UNDER APPLICABLE LAW, DAYTON’S LIABILITY FOR CONSEQUENTIAL
AND INCIDENTAL DAMAGES IS EXPRESSLY DISCLAIMED. DAYTON’S LIABILITY IN ALL EVENTS IS LIMITED TO AND SHALL NOT
EXCEED THE PURCHASE PRICE PAID.
2Z363F
WARRANTY DISCLAIMER. A DILIGENT EFFORT HAS BEEN MADE TO PROVIDE PRODUCT INFORMATION AND ILLUSTRATE
THE PRODUCTS IN THIS LITERATURE ACCURATELY; HOWEVER, SUCH INFORMATION AND ILLUSTRATIONS ARE FOR THE SOLE
PURPOSE OF IDENTIFICATION, AND DO NOT EXPRESS OR IMPLY A WARRANTY THAT THE PRODUCTS ARE MERCHANTABLE,
OR FIT FOR A PARTICULAR PURPOSE, OR THAT THE PRODUCTS WILL NECESSARILY CONFORM TO THE ILLUSTRATIONS OR
DESCRIPTIONS. EXCEPT AS PROVIDED BELOW, NO WARRANTY OR AFFIRMATION OF FACT, EXPRESSED OR IMPLIED, OTHER
THAN AS STATED IN THE “LIMITED WARRANTY” ABOVE IS MADE OR AUTHORIZED BY DAYTON.
Technical Advice and Recommendations, Disclaimer. Notwithstanding any past practice or dealings or trade custom,
sales shall not include the furnishing of technical advice or assistance or system design. Dayton assumes no obligations
or liability on account of any unauthorized recommendations, opinions or advice as to the choice, installation or use of
products.
Product Suitability. Many jurisdictions have codes and regulations governing sales, construction, installation, and/or use
of products for certain purposes, which may vary from those in neighboring areas. While attempts are made to assure
that Dayton products comply with such codes, Dayton cannot guarantee compliance, and cannot be responsible for how
the product is installed or used. Before purchase and use of a product, review the product applications, and all applicable
national and local codes and regulations, and be sure that the product, installation, and use will comply with them.
Certain aspects of disclaimers are not applicable to consumer products; e.g., (a) some jurisdictions do not allow the exclusion
or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you; (b) also,
some jurisdictions do not allow a limitation on how long an implied warranty lasts, consequently the above limitation
may not apply to you; and (c) by law, during the period of this Limited Warranty, any implied warranties of implied
merchantability or fitness for a particular purpose applicable to consumer products purchased by consumers, may not be
excluded or otherwise disclaimed.
Prompt Disposition. A good faith effort will be made for prompt correction or other adjustment with respect to any
product which proves to be defective within limited warranty. For any product believed to be defective within limited
warranty, first write or call dealer from whom the product was purchased. Dealer will give additional directions. If unable to
resolve satisfactorily, write to Dayton at address below, giving dealer’s name, address, date, and number of dealer’s invoice,
and describing the nature of the defect. Title and risk of loss pass to buyer on delivery to common carrier. If product was
damaged in transit to you, file claim with carrier.
Manufactured for Dayton Electric Mfg. Co., 5959 W. Howard St., Niles, Illinois 60714-4014 U.S.A.
Manufactured for Dayton Electric Mfg. Co.
Niles, Illinois 60714-4014 U.S.A.
4
Loading...