Cambridge audio AZUR 840A User Manual

www.cambridge-audio.com

Tech specs

840 specifications

Features

120 watts per channel

Class XD Proprietary Technology

8 audio inputs (1 balanced)

Multi-relay stage attenuator for volume/input selection

CAP5 – Five way protection system (DC detection, over

temperature detection, overvoltage/overcurrent detection, short circuit

detection, intelligent clipping detection)

Massive oversized torodial transformer

RS232 Port, Control Bus In/Out, IR Emitter and A-Bus

Ready multi-room outputs for custom installation

Customisable input/source naming

Input gain trim

Fixed level inputs

Adjustable LCD brightness

Full-function aluminium face Azur Navigator remote control

Available in Silver/black

Performance

Power output: 120W RMS into 8 Ohms

200W RMS into 4 Ohms

THD (unweighted): <0.0015% 1 kHz at 80% of rated power

<0.015% 20 Hz - 20 kHz at 80% of rated power

Frequencey response: 10 Hz - 50 kHz +/- 1 dB

S/N ratio: (ref 1 W/8 Ohm) > 83 dB

Input impedances: Input 1 (balanced) 10 k0hm

Inputs 2-7 68 k0hm

Tape Input 68 k0hm

Power amp damping factor: > 110 at 1 kHz

Max power consumption: 800W

Minimum power consumption: Active (no signal) 70W

Standby 7W

Bass and treble controls: Shelving type

Max bass boost.cut +/- 10dB at 10 Hz

Max treble boost/cut +/- 7.5 dB at 20 kHz

Dimensions: (H x W x D) 115 x 430 x 385mm (4.5 x 16.0 x 15.2”)

Weight: 15.0kg (33LBs)

Cambridge Audio’s policy is one of continuous improvement. Design and specifications are therefore subject to change without prior notice.

Cambridge Audio, Gallery Court, Hankey Place, London, SE1 4BB, England

Azur 840A class XD™integrated amplifier

Cambridge Audio re-defines mid-range audio market with

the Azur 840A class XD™ stereo integrated amplifier

XD technology™ is a trademark of Cambridge Audio Limited

Azur 840A class XD

Integrated Amplifier