Cambridge Audio 640H User Manual
ENGLISH
Music server
User’s manual
2
640Hazur
Thank you for purchasing this Cambridge Audio 640H Music Server. In
the last few years hard disk technology and compressed audio formats
such as MP3 and AAC have revolutionised the way we listen to and store
music. Yet despite these technological advances, so far there hasn't
been a solution which combines true audiophile standards of
reproduction with a
high capacity storage server in a cost-eeffective
package. This, we hope you’ll agree, cha
nges with the launch of the
640H with AudioFile™ – a suite of proprietary embedded software
developed to manage storage, transfer and playback of music in a real
hi-ffi environment.
About this unit
AudioFile is seen for the first time in the 640H Music Server, where you
can appreciate the quality of music reproduction you've come to expect
from Cambridge Audio matched to a capacious 160GB AV quality hard
drive and a high speed CD burner. With such a large hard drive available,
approximately 300 albums can be stored in uncompressed format for
the highest sound quality.
Other features include a Hi-fi DAC board using the same Wolfson DAC
and proprietary balanced virtual earth filter technology as used in our
Azur CD players; an Audiophile oversize toroidal transformer where most
competitors use a PC power supply; and no fewer than seven linear
regulated PSUs (Power Supply Units) for all the critical audio stages,
DAC, clock etc.
Once your music is stored in uncompressed or compressed MP3 format
(where you can choose the compression level) you can form your own
personal music library to make music compilations for use in your home,
burn to CD or transfer to portable media players. Share uncompressed
or compressed music files via a wired or wireless network and playback
music from your PC or Mac (stored in programs such as iTunes™ or
Windows Media Player) or other network devices via the 640H.
The 640H can also stream to and from other AudioFile based units in
your home or even your PC/Mac via wired or wireless network
technology using ethernet/Wi-Fi adaptors. On-board internet radio gives
you access to stations across the world, and unlike a PC, the 640H
offers virtually instant start-up and shut-down from Standby mode.
To access the comprehensive on-screen display menus, it is
recommended you connect your 640H to a TV (via Composite, S-Video
or VGA OSD outputs). An Azur Navigator remote control is also provided,
giving full remote control of your 640H in an attractive and easy to use
handset.
Finally, to allow seamless integration with multi-room entertainment
systems, a Control Bus input and output have been fitted, plus an IR
emitter input and RS232C.
Your 640H can only be as good as the system it is connected to. Please
do not compromise on your amplifier, speakers or cabling. Naturally we
particularly recommend amplification from the Cambridge Audio Azur
range, which have been designed to the same exacting standards as
this unit. Your dealer can also supply excellent quality Cambridge Audio
interconnects to ensure your system realises its full potential.
Thanks for taking the time to read this manual, we do recommend you
keep it for future reference.
Matthew Bramble
Technical Director
2
Contents Introduction
Introduction .................................................................................................2
End User Licence Agreement.....................................................................3
Technical specifications..............................................................................3
Limited warranty..........................................................................................4
Safety precautions ......................................................................................4
Important safety instructions .....................................................................5
Rear panel connections..............................................................................6
Front panel controls ...................................................................................7
Remote control............................................................................................8
Remote control of matching products.......................................................8
Introduction to AudioFile.............................................................................9
Getting started with your 640H............................................................9-12
Extra features of the 640H ................................................................13-15
Custom installation (C.I.) use...................................................................15
Product upgrades .....................................................................................15
Networking your 640H .............................................................................16
Setting up IP addresses for your network...............................................17
PC/PDA control .........................................................................................18
Album art management ...........................................................................18
Troubleshooting.........................................................................................19
640Hazur
3
ENGLISH
You have acquired a device ("DEVICE") which includes software licensed
by Cambridge Audio from one or more software licensors (Cambridge
Audio's “SOFTWARE SUPPLIERS").
Such software products, as well as associated media, printed materials
and "online" or electronic documentation ("SOFTWARE") are protected by
international intellectual property laws and treaties. The SOFTWARE is
licensed, not sold. All rights reserved.
IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT
("EULA"), DO NOT USE THE DEVICE. INSTEAD, PROMPTLY CONTACT
CAMBRIDGE AUDIO FOR INSTRUCTIONS ON RETURN OF THE UNUSED
DEVICE FOR A REFUND.
ANY USE OF THE SOFTWARE, INCLUDING BUT
NOT LIMITED TO USE OF THE DEVICE, WILL CONS
TITUTE YOUR
AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS
CONSENT).
GRANT OF SOFTWA
RE LICENSE.
This EULA grants you the following
license:
•
USE.
You may use the SOFTWARE only on the DEVICE
•
NOT FAULT TOLERANT.
The SOFTWARE is not fault tolerant. Cambridge
Audio has independently determined how to use the SOFTWARE in the
DEVICE and the SOFTWARE SUPPLIERS have relied upon Cambridge
Audio to conduct sufficient testing to determine that the software is
suitable for such use.
•
NO WARRANTIES FOR THE SOFTWARE.
The SOFTWARE is provided "AS
IS" and with all faults. The entire risk as to satisfactory quality,
performance accuracy, and efforts (including lack of negligence) is
with you. Also, there is no warranty against interference with your
enjoyment of the SOFTWARE or against infringement. If you have
received any warranties regarding the DEVICE or the SOFTWARE, those
warranties do not originate from, and are not binding on SOFTWARE
SUPPLIERS.
• NO LIABILITY FOR
CERTAIN DAMAGES.
Except as prohibited by law,
SOFTWARE SUPPLIERS shall have no liability for any indirect, special,
consequential or incidental damages arising from or in connection
with the use or performance of the SOFTWARE. This limitation shall
apply even if any remedy fails of its essential purpose. In no event
shall SOFTWARE SUPPLIERS be liable for any amount in excess of U.S.
Two Hundred and Fifty Dollars (U.S.$250.00).
•
LIMITATIONS ON REVERSE ENGINEERING, DECOMPILATION, AND
DISASSEMBLY.
You may not reverse engineer, decompile, or
disassemble the SOFTWARE except and only to the extent that such
activity is expressly permitted by applicable law notwithstanding this
limitation.
• S
OFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS.
You may
permanently transfer rights under this EULA only as part of a
permanent sale or transfer of the DEVICE, and only if the recipient
agrees in full to this EULA. If the SOFTWARE is available as an
upgrade to the DEVICE, any transfer must also include any prior
versions of the SOFTWARE.
• EXPORT RESTRICTIONS.
You acknowledge that SOFTWARE is subject
to U.S. and European Union export jurisdiction. You agree to comply
with all applicable international and national laws that apply to the
SOFTWARE, including the U.S. Export Administration Regulations, as
well as end-user, end-use and destination restrictions issued by U.S.
and other governments.
• USE RESTRICTIONS.
This DEVICE is not intended for use in medical,
life saving, or life sustaining applications and no liability whatsoever is
accepted by Cambridge Audio, nor by the SOFTWARE SUPPLIERS, for
any failure of the DEVICE when used in this manner.
End User Licence Agreement (“EULA”)
Hard Drive
160GB hard drive
Processor
VIA C3 1GHz
D/A Converter
Wolfson WM8740
24-Bit/192kHz capable
Frequency Response
20Hz - 20kHz +/- 1dB (PCM)
THD
<0.008% @ 1kHz 0dB (PCM)
S/N Ratio
>104 dB 'A' weighted (PCM)
Playback Formats •
Uncompressed PCM
44.1kHz / 16-Bit
48kHz / 16-Bit
•Windows Media Audio (.wma)
32, 48, 64, 96, 128, 160, 192 kbps
CBR or VBR, Voice
•Fraunhofer MPEG-1 Layer 3 (.mp3)
48, 96, 128, 160, 192VBR, 192CBR
and 320kb
•Advanced Audio Coding (.aac)
•Microsoft MPEG-1 Layer 1
•Microsoft MPEG-1 Layer 2
•Waveform Audio (.wav)
•Sound File (.snd)
•Unix Audio (.au)
•Audio Interchange File Format
(.aif, .aiff, .aifc)
Input Voltage
UK/EU/AU 230V AC ~ 50Hz
CU 115V AC ~ 50-60Hz
Maximum Power Consumption
70W
Dimensions - H x W x D
80 x 430 x 315mm (3 x 17 x 12.4")
Weight
8.0kg (17.6Lbs)
Connections
1 x Ethernet
3 x USB V2.0/1.1
1 x PS/2 keyboard
1 x RS232C
1 x IR emitter in and out (modulated)
1 x Control Bus in and out (unmodulated)
1 x Composite video
1 x S-Video
1 x VGA
1 x IEC mains inlet
1 x SPDIF digital out
1 x Optical digital out
Technical specifications
Visit www.cambridge-audio.com and register to receive notification of future
hardware and software releases.
This guide is designed to make installing and using this unit as easy as possible.
Information in this document has been carefully checked for accuracy at the time
of printing; however, Cambridge Audio's policy is one of continuous improvement,
therefore design and specifications are subject to change without prior notice.
For the latest version of this manual please visit:
www.cambridgeaudio.com/support.php
This document contains proprietary information protected by copyright. All rights
are reserved. No part of this manual may be reproduced by any mechanical,
electronic or other means, in any form, without prior written permission of the
manufacturer. All trademarks and registered trademarks are the property of their
respective owners.
AudioFile is a registered trademark of Cambridge Audio Ltd.© Copyright Cambridge
Audio Ltd 2007
iPod and iTunes are copyright © Apple Computer, Inc. All rights reserved.
4
Cambridge Audio warrants this product to be free from defects in
materials and workmanship (subject to the terms set forth below).
Cambridge Audio will repair or replace (at Cambridge Audio's option) this
product or any defective parts in this product. Warranty periods may vary
from country to country. If in doubt consult your dealer and ensure that
you retain proof of purchase.
To obtain warranty service, please contact the Cambridge Audio authorised
dealer from which you purchased this product. If your dealer is not
equipped to perform the repair of your Cambridge Audio product, it can be
returned by your dealer to Cambridge Audio or an authorised Cambridge
Audio service agent. You will need to ship this product in either its original
packaging or packaging affording an equal degree of protection.
Proof of purchase in the form of a bill of sale or receipted invoice, which
is evidence that this product is within the warranty period, must be
presented to obtain warranty service.
This Warranty is invalid if (a) the factory-applied serial number has been
altered or removed from this product or (b) this product was not
purchased from a Cambridge Audio authorised dealer. You may call
Cambridge Audio or your local country Cambridge Audio distributor to
confirm that you have an unaltered serial number and/or you purchased
from a Cambridge Audio authorised dealer.
This Warranty does not cover cosmetic damage or damage due to acts of
God, accident, misuse, abuse, negligence, commercial use, or modification
of, or to any part of, the product. This Warranty does not cover damage due
to improper operation, maintenance or installation, or attempted repair by
anyone other than Cambridge Audio or a Cambridge Audio dealer, or
authorised service agent which is authorised to do Cambridge Audio
warranty work. Any unauthorised repairs will void this Warranty. This
Warranty does not cover products sold AS IS or WITH ALL FAULTS.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE
THE EXCLUSIVE REMEDY OF THE CONSUMER. CAMBRIDGE AUDIO SHALL
NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY IN THIS PRODUCT.
EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE
AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES
WHATSOEVER INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.
Some countries and US states do not allow the exclusion or limitation of
incidental or consequential damages or implied warranties so the above
exclusions may not apply to you. This Warranty gives you specific legal
rights, and you may have other statutory rights, which vary from state to
state or country to country.
Plug Fitting Instructions (UK Only)
The cord supplied with this appliance is factory fitted with a UK mains plug fitted
with a 3 amp fuse inside. If it is necessary to change the fuse, it is important that
a 3 amp one is used. If the plug needs to be changed because it is not suitable for
your socket, or becomes damaged, it should be cut off and an appropriate plug
fitted following the wiring instructions below. The plug must then be disposed of
safely, as insertion into a mains socket is likely to cause an electrical hazard.
Should it be necessary to fit a 3-pin BS mains plug to the power cord the wires
should be fitted as shown in this diagram. The colours of the wires in the mains
lead of this appliance may not correspond with the coloured markings identifying
the terminals in your plug. Connect them as follows:
The wire which is coloured BLUE must be
connected to the terminal which is marked
with the letter ‘N’ or coloured BLACK.
The wire which is coloured BROWN must be
connected to the terminal which is marked
with the letter ‘L’ or coloured RED.
The wire which is coloured GREEN/YELLOW
must be connected to the terminal which is
marked with the letter ‘E’ or coloured GREEN.
If your model does not have an earth wire,
then disregard this instruction.
If a standard 13 amp (BS 1363) plug is used, a 3 amp fuse must be fitted, or if any
other type of plug is used a 3 amp or 5 amp fuse must be fitted, either in the plug
or adaptor, or on the distribution board.
Checking the Power Supply Rating
For your own safety please read the following instructions carefully before
attempting to connect this unit to the mains.
Check that the rear of your unit indicates the correct supply voltage. If your mains
supply voltage is different, consult your dealer.
This unit is designed to operate only on the supply voltage and type that is
indicated on the rear panel of the unit. Connecting to other power sources may
damage the unit.
This equipment must be switched off when not in use and must not be used unless
correctly earthed. To reduce the risk of electric shock, do not remove the unit's cover
(or back). There are no user serviceable parts inside. Refer servicing to qualified
service personnel. If the power cord is fitted with a moulded mains plug the unit must
not be used if the plastic fuse carrier is not in place. Should you lose the fuse carrier
the correct part must be reordered from your Cambridge Audio dealer.
The lightning flash with the arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of un-insulated ‘dangerous
voltage’ within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
instructions in the service literature relevant to this appliance.
The crossed-out wheeled bin is the European Union symbol for
indicating separate collection for electrical and electronic
equipment. This product contains electrical and electronic
equipment which should be reused, recycled or recovered and
should not be disposed of with unsorted regular waste. Please
return the unit or contact the authorised dealer from whom you
purchased this product for more information.
Approvals
This product complies with European Low Voltage (73/23/EEC)
and Electromagnetic Compatibility (89/336/EEC) Directives
when used and installed according to this instruction manual.
For continued compliance only Cambridge Audio accessories
should be used with this product and servicing must be referred
to qualified service personnel.
NNOOTTEE:: TTHHEE MMAANNUUFFAACCTTUURREERR IISS NNOOTT RREESSPPOONNSSIIBBLLEE FFOORR AANNYY RRAADDIIOO OORR TTVV
II NNTTEERRFFEERREENNCCEE CCA
AUUSSEEDD BBYY UUNNAAUUTTHHOORRIIZZEEDD MMOODDIIFFIICCAATTIIOONNSS TTOO TTHHII SS
EEQQUUIIPPMMEENNTT.. SSUUCCHH MMOODDIIFFIICCAATTIIOONNSS CCOOUULLDD VVOOI
IDD TTHHEE UUSSEERR AAUUTTHHOORRIITTYY TTOO
OOPPEERRAATTEE TTHHEE EEQQUUIIPPMMEENNTT..
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Re-orient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Safety precautionsLimited warranty
640Hazur
5
Important safety instructions
Please take a moment to read these notes before installing your 640H,
as they will enable you to get the best performance and prolong the life
of the unit. We advise you follow all instructions, heed all warnings and
keep the instructions for future reference.
Ventilation
IMPORTANT - The unit will become hot when in use.
This unit has a powerful processing engine that naturally generates
heat. The outer chassis will therefore be hotter than other hi-fi
components. This is quite normal and will not affect performance or
safety.
Please ensure there is ample ventilation (at least 10cm clearance all
round). Do not put any objects on top of this unit. Do not situate it on a
rug or other soft surface and do not obstruct any air inlets or outlet
grilles. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that produce
heat. Do not stack multiple units on top of each other. Do not place in
an enclosed area such as a bookcase or in a cabinet without sufficient
ventilation. When in a 19" rack tray, leave 1 unit space (minimum)
between units.
Ensure that small objects do not fall through any ventilation grille. If this
happens, switch off immediately, disconnect from the mains supply and
contact your dealer for advice.
Positioning
Choose the installation location carefully. Avoid placing it in direct
sunlight or close to a source of heat. Also avoid locations subject to
vibration and excessive dust, cold or moisture. Do not place the unit on
an unstable surface or shelf. The unit may fall, causing serious injury to
a child or adult as well as serious damage to the product. Do not place
a DVD player or other equipment on top of the unit.
This unit must be installed on a sturdy, level surface. Do not place in a
sealed area such as a bookcase or in a cabinet. Any space
open at the back (such as a dedicated equipment rack) is fine
however. When a cart is used, use caution when moving the
cart to avoid injury from tip-over.
WARNING - To reduce the risk of fire or electric shock, do not expose this
unit to rain or moisture. This unit must not be used near water or
exposed to dripping or splashing water or other liquids. No objects filled
with liquid, such as vases, shall be placed on the unit. In the event,
switch off immediately, disconnect from the mains supply and contact
your dealer for advice.
Electronic audio components have a running in period of around a week
(if used several hours per day). This will allow the new components to
settle down, the sonic properties will improve over this time.
Grounding and polarisation
Do not defeat the safety purpose of the polarized or grounding type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or third prong are provided for your safety. If the provided
plug does not fit your outlet, consult an electrician for replacement of
the obsolete outlet.
Power sources
The unit is of Class 1 construction and must be connected to a Mains
socket outlet with a protective earthing connection.
The unit should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of powersupply to your home, consult your product dealer or local Power
Company.
This unit has been designed to be left in Standby mode when not in use,
this will increase the life of the amplifier (this is true with all electronic
equipment). To turn the unit off completely switch off on the rear panel.
If you do not intend to use this unit for a long period of time, unplug it
from the mains socket.
Power cord protection
The unit must be installed in a manner that makes disconnection of the
mains plug from the mains socket outlet (or appliance connector from the
rear of the unit) possible. Where the mains plug is used as the disconnect
device, the disconnect device shall remain readily operable. Protect the
power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the unit.
Be sure to insert each power cord securely. To prevent hum and noise, do
not bundle the interconnect leads with the power cord or speaker leads.
Overloading
Do not overload wall outlets or extension cord as this can result in a risk
of fire or electric shock. Overloaded AC outlets, extension cords, frayed
power cords, damaged or cracked wire insulation, and broken plugs are
dangerous. They may result in a shock or fire hazard.
Lightning
For added protection during a thunderstorm, or when it is left
unattended and unused for long period of time, unplug the unit from the
wall outlet and disconnect the antenna or cable system. This will prevent
damage to the unit from lightning and power-line surges.
Cleaning
To clean the unit, wipe its case with a dry, lint-free cloth. Do not use any
cleaning fluids containing alcohol, ammonia or abrasives. Do not spray
an aerosol at or near the amplifier. The use of a lens cleaning disc at
least once a month can also prolong unit life.
Attachments
Do not use attachments not recommended by your dealer as they may
cause harm to the unit. Only use the specified attachments/accessories
with this unit.
Servicing
These units are not user serviceable, never attempt to repair,
disassemble or reconstruct the unit if there seems to be a problem. A
serious electric shock could result if this precautionary measure is
ignored. In the event of a problem or failure, please contact your dealer.
Contact the service department should any of these conditions occur:
- When the power-supply cord or plug is damaged.
- If liquid has been spilled, or objects have fallen into the unit.
- If the unit has been exposed to rain or water.
- If the unit does not operate normally after following the operation
instructions, adjust only those controls that are covered by the
operation instructions.
- If the unit has been dropped or damaged in any way.
- When the unit exhibits a distinct negative change in performance.
Important Note
This unit has been designed to play compact discs,
recordable CDs (CD-R) and re-writable CDs (CD-RW)
bearing the identification logo shown here. No other
discs can be used. The CD-R/CD-RW discs should
contain properly recorded TOC (Table of Contents) information so that
they can be played back. This unit can play only the discs recorded in the
CD-DA format designed for music reproduction. Do not attempt to play a
disc on this unit containing other data, such as a CD-ROM for PCs.
Be aware of plasma screen image retention or “screen-burn” when
using your 640H. Always use the “I/O” button to switch off the on-screen
display when not using the menu system to change settings etc. LCD or
conventional CRT TVs do not suffer from this problem.
ENGLISH
6
Rear panel connections
Note: The 640H must be connected to a monitor or TV before it is
switched on so that the 640H can detect the connection type being used.
Keyboard
Connections for an optional PS/2 keyboard.
Monitor
VGA monitor connection.
Ethernet
Ethernet port for connecting to a network (see the ‘Networking your
640H’ section of this manual for more information).
USB 1/USB 2
Ports for interfacing to a flash/memory card or storage device. All ports
are fully “USB2.0” compliant.
S-Video
S-Video (SVHS) TV connection.
Composite video
Composite Video (CVBS) TV connection.
IR (Infra Red) Emitter In/Out
In -
Allows modulated IR commands from multi-room systems to be
received by the unit. Commands received here are not looped out of
the Control Bus (they are looped out of IR Out).
Out -
Loop out of IR modulated commands. Also allows the unit to
generate IR commands (for future use).
RS232
For custom install use.
1
Control Bus
In -
Allows un-modulated commands from multi-rooms systems or other
components to be received by the unit.
Out -
Loop out for control bus commands to another unit.
Toslink Optical Digital output
Use to connect to the input of a separate DAC or digital recording
machine. Use a high quality TOSLINK fibre optic interconnect cable
designed specifically for audio use.
S/P DIF Co-axial Digital output
Use to connect to the input of a separate DAC or digital recording
machine. To obtain best results, use a high quality 75 ohm digital RCA
interconnect cable (not one designed for normal audio use).
Audio In/Out
In - Connect to the line level output terminals of a source device for
recording (ie CD input or Aux input etc).
Out - Connect to the line level input terminals on your amplifier.
Power On/Off
Switches the unit on and off.
Mains Voltage Selector Switch
Switches the mains voltage between 115V and 230V. For use by
installer/dealer only.
AC power socket
Once you have completed all connections to the amplifier, plug the AC
power cable into an appropriate mains socket. IMPORTANT - Do not
remove the power cable without switching the 640H off first.
2
3
8
4
5
6
7
10
11
12
13
14
15
1
2
3
4
5 6
7
8 9
10 11
13 14
15
1. Connections to a TV or monitor 2. Audio connections to an amplifier/source
3. Connections to optional external devices/network 4. Digital audio connections to an amplifier
Keyboard and USB devices
to be connected by their
respective cables
To the digital or DAC inputs of your
AV receiver using either toslink
optical or coaxial digital cables
(COAX-COAX or OPT-OPT)
To line inputs of
an amplifier using
phono cable
(2RCA-2RCA)
To line outputs of a
source device using
phono cable
(2RCA-2RCA)
To TV S-Video
input using
S-Video cable
(MINIDIN-
MINIDIN)
To TV Audio
input using
phono cable
(2RCA-2RCA)
To Monitor
input using
VGA/D-Sub
cable
To Ethernet port using
Ethernet cable
(RJ-45 plugs)
To T V
Composite Video
input using
phono video
cable (RCA-RCA)
OR OR
12
NNoottee:: TThhee 664400HH mmuusstt bbee ccoonnnneecctteedd ttoo aa mmoonniittoorr oorr TTVV bbeeffoorree iitt iiss
sswwiittcchheedd
oonn ssoo tthhaatt tthhee 664400HH ccaann ddeetteecctt tthhee ccoonnnneeccttiioonn ttyyppee bbeeiinngg uusseedd..
9
: 70W
Mains Voltage Selector Switch
115V/230V AC~50/60Hz
Power AC
Manufactured in an
ISO9002 approved facility
Designed in London, England
Keyboard
Class 1 Laser Product
Luokan 1 Laserplaite
Klass 1 Laserapparat
Monitor S-Video
Ethernet
USB 1
USB 2
In Out
Composite
Video
RS232
Control BusIR Emitter
In
Out
Digital Outputs
S/P DIF
Toslink
Co-axial
Optical
OutInIn
L
R
Audio
L
R
Out
Power
On Off
azur 640H Music Server
Max Power Consumption
Risk of electric shock
Caution
Do not open
Risque de choc electrique
Avis
Ne pas ouvrir
Vorm offnen des gerates
Achtung
Netzstecker ziehen
www.cambridge-audio.com
Loading...