You’ll soon be enjoying your new Bluetooth Speaker.
It all begins here, with your instructions. Don’t worry, there’s
nothing too technical coming up. Just simple, step-by-step
guidance to get you up and running quickly. Sound good? Then
let’s get started.
Help and Guidance
We’re here to help you get the most from your Bluetooth Speaker. Should you require any
guidance, a simple solution can often be found online at:
www.argos-support.co.uk
If you still require further assistance, call one of our experts on 0345 600 3021.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
Contents
Safety information
1
Safety information 6
Getting to know your Bluetooth Speaker
2
Ready? Let’s begin 10
Accessories 10
Front and rear features 11
Features and controls 11
Connecting the mains power cable 1
Standby mode 12
Switching input modes 13
Volume function 13
EQ sound effects 13
Using your Bluetooth Speaker
3
Line/Aux-in input connection 16
Connecting a Bluetooth device 17
Controlling a connected device 18
Other information
4
Care & maintenance 20
Technical specification 20
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
3
Contents
Product support
5
Troubleshooting 22
Help and assistance 23
Disposal 24
Guarantee 25
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
4
1Safety information
Safety information
Important - Please read these instructions fully before installing or operating
Power source
• This symbol means that this unit is double insulated. An earth connection is
not required.
• The appliance must be connected to a 220-240 volt 50/60Hz AC supply by
means of a three pin socket.
• Unplug this apparatus during lightning storms or when unused for long
periods of time - to prevent damage to this product.
• Opening or removing covers may expose you to dangerous voltages or other
hazards.
• To prevent risk of fire or electric shock, avoid overloading wall outlets,
extension cords, or integral convenience receptacles.
• Use suitable power sources - Plug the product into a suitable power source, as
described in the operating instructions or as marked on the product.
• The supply voltage should be the same as that indicated in the technical
specifications and the appliance rating plate.
• If the socket outlets in your home are not suitable for the plug supplied with
this unit check with a qualified electrician for replacement.
• In order to disconnect the apparatus from the mains completely, switch off
the outlet and remove the mains plug completely.
• Do not bend, stretch or pull the supply cable in order to avoid electric shock.
• When installed, the power socket must be within easy reach.
Moisture and water
• Do not use this apparatus near water or moisture.
• Do not use this product near a bathtub, washbowl, kitchen sink, and laundry tub, in
a wet basement, near a swimming pool, or anywhere else that water or moisture is
present.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
Safety information6
Safety information
Important - Please read these instructions fully before installing or operating
Heat sources and flames
• Batteries shall not be exposed to excessive heat such as sun, fire or the like
• To prevent risk of fire or electric shock, avoid overloading wall outlets,
extension cords, or integral convenience receptacles.
Servicing and repairs
• Refer all servicing to qualified service personnel
• Servicing is required when the apparatus has been damaged in any way: such as liquid
has been spilled or objects have fallen into the apparatus; the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
Safety information
7
This page is left intentionally blank
Getting to know your Bluetooth
Speaker
2
Getting to know your Bluetooth Speaker
MODEUNPAIREQVOL-VOL+
You’ll be up and running in no time
Ready? Let’s begin...
Please read these instructions carefully. They contain important information which will
help you get the best from your product and ensure safe and correct installation and
operation.
If you require any further assistance, our technical experts are happy to help. For full
details, refer to the product support section at the end of these instructions.
Accessories
1. Bluetooth Speaker unit
2. Mains adaptor
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
10
Getting to know your Bluetooth Speaker
Getting to know your Bluetooth Speaker
You’ll be up and running in no time
1
2
3
7
8
9
1. UNPAIR/EQ button
2. MODE/
STANDBY button
3. Speaker grill
button
4.
5. VOL+/
6. VOL-/
button
button
MODEUNPAIREQVOL-VOL+
7. Speakers
8. LED indicator
9. AUX input socket
10. BASS port
11. DC mains input
4
5
6
7
10
11
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
Getting to know your Bluetooth Speaker11
Getting to know your Bluetooth Speaker
You’ll be up and running in no time
Connecting the mains power cable
1. Insert the mains socket jack into the DC power input (11) on the rear of the unit.
2. Connect the mains plug to a wall outlet and switch on.
3. The initial mode when powered on is STANDBY. Press the
standby.
The last mode used is memorised when the power is turned off and on.
button (2) to wake from
Standby mode
This unit is designed to enter STANDBY mode automatically after 20 MINUTES
(approximately) of inactivity. Press the
1. Press the
flash for 5 minutes and then enter power saving mode. Press the
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
12
button (2) to put the system into standby mode. The red LED indicator will
Getting to know your Bluetooth Speaker
button (2) to wake the unit.
button (2) to wake.
Getting to know your Bluetooth Speaker
You’ll be up and running in no time
Switching input modes
Follow the below instructions to switch between Bluetooth and LINE in input modes.
1. Press the and hold the MODE button (2) to switch modes. Line-in mode is indicated
with a solid red LED and Bluetooth is a blue LED (either flashing or solid depending on
the connection status).
Volume function
1. Press and hold the VOL+ button (5) to increase the volume output.
1. Press and hold the VOL- button (6) to decrease the volume output.
EQ sound eects
Select from five sound EQ modes of: FLAT, ROCK, JAZZ, POP & CLASSIC.
1. Press the EQ button (1) to cycle between them. Each press is indicated by a sequence
of three flashes on the LED indicator (8).
NOTE: There is no indication which EQ is active, so select the mode that best suits your
sound preference for the tracks that you are playing.
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
Getting to know your Bluetooth Speaker13
This page is left intentionally blank
Using your Bluetooth
Speaker
3
Using your Bluetooth Speaker
Let’s get started
Line/AUX-in input connection
Follow the steps below to connect an external audio source (such as a smartphone) for
playback through the Bluetooth Speaker..
You will need a 3.5mm audio cable (not supplied) to connect a device to the AUX input
socket (9).
1. Connect one end of the 3.5mm audio cable to the AUX IN input socket (9) on back of
the unit. Connect the other end to an earphone socket on the audio device (such as a
smartphone).
2. Switch to AUX imode by pressing and holding the MODE button until you see the red
LED indicator.
3. Press PLAY on the audio device.
4. Adjust the volume to your desired level.
When connecting via the headphone output the volume of the bluetooth speaker
is affected by the volume control on the player. Ensure that the audio source (e.g.
smartphone) is set to about 70-80% to avoid distortion.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
Using your Bluetooth Speaker16
Using your Bluetooth Speaker
Let’s get started
Connecting a Bluetooth device
When using the Bluetooth connection, you can listen to audio wirelessly from a Bluetooth
audio device (e.g. smartphone) within 10 metres of the Bluetooth Speaker unit.
1. When in Bluetooth pairing mode you will see a flashing blue LED while the unit
searches for previously paired devices or makes itself available for new connections.
2. Enable Bluetooth on your audio device (e.g. smartphone) and search for available
bluetooth connections. Select the ‘BUSH WOOD SPEAKER’ from the list. If you are
asked for a pass code enter ‘0000’. The blue LED will stop flashing once connected.
If you turn off either device before pairing is complete the process will need to be
repeated when powered ON again.
Each time you switch the Bluetooth Speaker on and select BLUETOOTH mode the
device will automatically connect, unless you have un-paired the device on your
bluetooth audio device.
3. You can now begin playback from the audio device and the output will playback
through the Bluetooth Speaker.
4. When using a mobile phone as an audio source and you receive a phone call the
audio playback stops while you receive the call. When you hang up the audio is
restored.
The volume output is effected by the volume level on the audio source e.g.
smartphone, so make sure that is set to about 70-80% (not too loud to avoid distortion).
5. To un-pair (disconnect) a bluetooth device, press and hold the UNPAIR button (1).
The Bluetooth Speaker will now revert to search mode, and be available for new
connections.
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
Using your Bluetooth Speaker
17
Using your Bluetooth Speaker
Let’s get started
Controlling a connected device
Once connected you can either use the controls on the audio device to begin playback,
skip tracks etc. Or you can use the control buttons on the unit/remote control.
1. The
2. To skip to the next track press the VOL+/
3. To skip to the previous track press the VOL-/
All other general audio functions such as EQ & VOLUME work as described in this
manual.
button (4) when pressed will begin playback of the selected track on the audio
device. Press again to pause playback.
button (5).
button (6).
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
Using your Bluetooth Speaker18
Other information4
Other information
Helpful technical information
Care & maintenance
After using the Bluetooth Speaker
• Set to Standby.
• Switch the unit off at the mains and unplug it if you are leaving it unattended for a long
period (holidays etc).
Care & cleaning
• All care and cleaning operations should be carried out with the unit unplugged from
the mains power.
• Occasionally wipe the cabinet with a lint free duster. Never clean the unit with liquids
or solvents.
Technical specification
SpecificationRating
Supply voltage
Output
Max. power consumption36W
Speaker power60 MAX watts, 2 x 20w RMS @ 10% THD
Bluetooth compatibilityEDR, A2DP, AVRCP
Bluetooth versionV2.1
Frequency range2.4Ghz - 2.480GHz
Unit dimensions125 x 286 x 130 mm
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
Other information20
220-240V~50/60Hz
18V
2000mA
Product support5
Product support
Help is always at hand
Troubleshooting
ProblemReason(s)Solution(s)
No powerPower cable not connected
to wall socket.
Make sure the plug is
connected.
Power socket is not
switched on.
No SoundVolume is too low.
AUX source volume is too
low.
Sound is distorted
Sound is distorted from
AUX input
Unable to pair with a
bluetooth device
Unit switches off after 20
minutes of inactivity
Volume is too high.
AUX audio source volume
is too high.
too far away from the
bluetooth speaker.
Something may be
interfering with the
bluetooth signal.
Auto standby mode in
operation.
Switch the power on.
Increase the volume.
Increase the volume of the
audio source volume (e.g.
smartphone).
Reduce the volume.
Reduce the volume of the
audio source volume (e.g.
smartphone).
Try again within 8 meters
(10 max).
Move the bluetooth
speaker to a different
location and try once more.
This unit is designed to
enter STANDBY mode
automatically after 20
MINUTES of inactivity.
Press the
the unit.
button to wake
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
Product support22
Product support
Help is always at hand
Help and assistance
If you require any technical guidance or find that your Bluetooth Speaker is not operating
as intended, a simple solution can often be found in the Troubleshooting section of these
instructions or online at www.argos-support.co.uk
If you still require further assistance, call one of our experts on 0345 600 3021*. To help
give us give you a fast and efficient service please have the following information ready:
You can find these
on the rating plate - a
small information
panel (usually a sticker
or metal plate) on the
rear of your product.
This will be shown on
your receipt
Model Ref.
Serial number
Date of purchase
Local call rates applies*
CSPK4012BT
Lines open 8am-7pm Monday to Saturday and
10am-4pm Sunday.
*Calls to Argos enquiry lines may attract a charge and set up fee from residential lines depending on
your call plan/tari. Mobile and other providers costs may vary, see www.bt.com/pricing for details.
For security and training purposes, telephone calls to and from customer service centres may be
recorded and monitored. Calls from Republic of Ireland will attract international call charges.
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
Product support23
Product support
Help is always at hand
Disposal
• Disposal of your old product. Your product is designed and manufactured with
high quality materials and components, which can be recycled and reused
• When this crossed out wheeled bin symbol is attached to a product it means
the product is covered by the European Directive 2002/96/EC.
• Please make yourself aware of the local collection system for electrical and
electronic products.
• Please act according to your local rules and do not dispose of your old
products with your normal household waste.
• The correct disposal of your old product will help prevent potential negative
consequences for the environment and human health.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks is under license.
This product is intended for use within the UK.
Declaration of Conformance
Hereby Argos LTD declares that the radio equipment type Bush CSPK4012BT is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address: http://www.argos-support.co.uk
Bluetooth Frequency Band 2.4Ghz.
Maximum radio-frequency power transmitted within above frequency band: 20dBm EIRP.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
Product support24
Product support
Help is always at hand
Call us now and activate your 12 month guarantee
Thank you for choosing Bush. Your new product is guaranteed against faults and breakdowns for 12 months.
Don’t forget to register it with us today so we can provide you with our best possible after-sales service and
useful updates.
www.bushregistration.co.uk
FREEPHONE*
0800 597 8548
Lines are open 8am - 8pm, 365 days a year. *Calls may be recorded and monitored.
Your Bush Guarantee
This product is guaranteed for twelve months from the date of original purchase. Any defect that arises due to
faulty materials or workmanship will be repaired free of charge (or if applicable the product will be replaced or the
purchase price refunded) where possible during this period by the dealer from who your purchased the unit.
The guarantee is subject to the following provisions:
• The guarantee does not cover accidental damage,
misuse, cabinet parts, knobs or consumable items.
• The product must be correctly installed and
operated in accordance with the instructions
contained in the manual.
• It must be used solely for domestic purposes. The
guarantee will be rendered invalid if the product is
Important Data Protection Information
If you provide us with information about another person,
you confirm that they have appointed you to act for
them, to consent to the processing of their personal
data including sensitive personal data and that you have
informed them of our identity and the purposes (as
set out in the Important Data Privacy notice displayed
overleaf) for which their personal data will be processed.
You are entitled to ask for a copy of the information
we hold about you (for which we may charge a small
fee) and to have any inaccuracies in your information
corrected.
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
re-sold or has been damaged by inexpert repair.
• Specifications are subject to change without
notice.
• Bush disclaim any liability for loss or damage arising
from the breakdown of the product.
• This guarantee is in addition to and does not
diminish your statutory or legal rights.
For quality control and training purposes, we may
monitor or record your communications with us.
If your personal details change, if you change your mind
about any of your marketing preferences or if you have
any queries about how we use your information, please
let us know by contacting our Data Protection
Officer, Domestic & General, Leicester House
17 Leicester Street, Bedworth, Warwickshire
CV12 8JP.
Product support25
Contact:
www.argos-support.co.uk
Helpline: 0345 600 3021
Rev: 1.4
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.