Bush CBB318i Instruction Manual

Instruction Manual

CBB318i

Page 1

Table of contents

Safety Warnings ........................... 2

Accessories included .......................... 3

Overview of controls ........................... 3

General operation ......................... 4

Battery installation ............................ 4

DC Mains operation ........................... 4

Standby mode ................................ 4

Volume controls ............................... 4

Radio operation ........................... 4

Radio operation (cont). . . . . . . . . . . . . . . . . . . . . . 5

Saving/recalling radio presets ................. 5

CD operation .............................. 5

Load a CD ..................................... 5

Playing a CD ................................... 5

Skip & search tracks .......................... 5

Repeat & Random playback ...................5

Programmed playback ........................ 6

iPod/iPhone operation ..................... 6

Pod/iPhone controls ....................... 6

Auxiliary input ............................. 7

Care & maintenance ....................... 8

Troubleshooting ........................... 8

Technical specifications .................... 9

Compatible iPod / iPhone list ............... 9

Product Codes

CBB318i

Please note that the iPod/iPhone docking
connector on this product is not compatible with
older iPhone & iPods with a 30 pin connector.

Page 2

Safety information

Important – Please read these instructions fully before installation

Safety Warnings

CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE ANY COVER. NO
USER-SERVICEABLE PARTS INSIDE, REFER ANY
SERVICING TO QUALIFIED SERVICE PERSONNEL.

Please read this owner’s guide

• Please take the time to follow the instructions in
this owner’s guide carefully. It will help you set up
and operate your system properly and enjoy all of its
advanced features.

• Please save this owner’s guide for future reference.

• The product label is located on the back of the
product.

• This product must be used indoors. It is neither
designed nor tested for use outdoors, in recreation
vehicles, or on boats.

• Heed all warnings - on the product and in the
owner’s guide.

• Do not use this apparatus near water or moisture.

• Do not use this product near a bathtub, washbowl,
kitchen sink, and laundry tub, in a wet basement,
near a swimming pool, or anywhere else that water
or moisture is present.

• Only use attachments/accessories specified by the
manufacturer.

• Unplug this apparatus during lightning storms or
when unused for long periods of time - to prevent
damage to this product.

• Refer all servicing to qualified service personnel

• Servicing is required when the apparatus has
been damaged in any way: such as liquid has been
spilled or objects have fallen into the apparatus; the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped -

• Do not attempt to service this product yourself.

• Opening or removing covers may expose you to
dangerous voltages or other hazards.

• To prevent risk of fire or electric shock, avoid
overloading wall outlets, extension cords, or integral
convenience receptacles.

• Use proper power sources - Plug the product into a
proper power source, as described in the operating
instructions or as marked on the product.

• The mains plug is used as the disconnect device, the
disconnect device shall remain readily accessible

CAUTION

RISK OF ELECTRIC SHOCK!

DO NOT OPEN!

This symbol means that this unit is double
insulated. An earth connection is not required.

CAUTION : CLASS 1 LASER PRODUCT
Use of contents or adjustments of performance of
procedures other than those specified Herein may
result in hazardous radiation exposure.

LASER SAFETY
This unit employs a laser, only qualified
service personnel should attempt repair.

DANGER: Invisible laser radiation when open and
interlock failed or defeated avoid direct exposure to
beam.
CAUTION: hazardous laser radiation when open and
intelock defeated.

Disc handling

Do not touch the playback side of the disc.
Do not attach paper or tape to disc.

Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the centre
outwards with a soft cloth. Always keep the disc clean.

If you cannot wipe off the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth and
finish with a dry cloth.
Do not use any type of solvent such as thinner, benzene,
commercially available cleaners or antistatic spray for
vinyl. It may damage the disc.
Do not store discs in a place subject to direct sunlight or
near heat source.
Do not store discs in a place subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case, stacking or placing
object on discs outside or their case may cause warping.

Page 3

Functions & controls

Please familiarize yourself with the parts and accessories listed below

Accessories included

• 1 x CBB318i • 1 x Mains adapter • 1 x Instruction manual • 2 x PVA pads

Overview of controls

1: CD compartment lid
2: AUX INPUT socket
3: VOLUME +/- buttons
4: STOP button
5: SKIP

/MEMORY - button

6: SPEAKERS

7: REPEAT/RANDOM buttons
8: LED display
9: CD LID open latch
10: iPod/iPhone dock
11: TUNING +/- buttons
12: PLAY/PAUSE button

13: SKIP

/MEMORY + button

14: MEMORY/PROGRAM button
15: POWER/FUNCTION button
16: CARRY HANDLE
17: ANTENNA
18: DC power input

VOL+

AUX IN

VOL-

PREP/RAN

POWER/FUNC

MEM/PROG.

PLAY/PAUSE

SKIP-/M-

STOP

SKIP+/M+

TUNING+

TUNING-

DC 10V

14

15

7

8

13

6

16

17

5

18

6

124

11

9

10

3

2

1

Page 4

General operation

Battery installation

1: Remove the battery compartment cover carefully.

2: Install 8 x ‘C’ size batteries (UM-2 or equivalent)

while observing the correct polarities.

NOTE: There is an engraved diagram showing

battery installation directions inside the battery
compartment.

3: Replace the battery compartment cover.

NOTE: The mains cable must be detached

from the DC mains socket of the player for the
batteries to power the unit.

Leaking batteries may damage the battery cabinet
and the player as a whole, so they should be
removed from the cabinet when becoming flat or
when the player is not to be used with batteries for
some time.

DC Mains operation

This unit is supplied with a DC mains adaptor.
1: To connect the power insert the mains socket jack

into the rear of the unit (18).

2: Insert the UK plug into a household power socket and

switch the power ON.

Standby mode

Using the standby mode will save power when the unit
is not in use.

1: When the unit is switched ON for the first time

STANDBY mode will be active.

2: To wake the unit from the STANDBY mode, press the

POWER/FUNCTION button (15). The unit will wake

and the POWER indicator next to the display will
illuminate.

3: To enter the STANDBY mode press and hold the

POWER/FUNCTION button (15) for at least 2 seconds.
The POWER indicator will dim.

NOTE: This unit is designed to enter

STANDBY mode automatically after 20 MINUTES
of inactivity. Press the POWER/FUNCTION (15)
button to wake the unit.

Volume controls

1: To increase the volume level press the VOL+ button

(3) repeatedly, or press and hold for rapid advance.

2: To decrease the volume level press the VO L- button

(3) repeatedly, or press and hold for rapid advance.

Radio operation

1: Wake the unit from STANDBY mode if required.
2: Press the POWER/FUNCTION button (15) repeatedly

until you see ‘87.5’ or another radio frequency on the
display.

3: Extend the antenna fully, and angle for best reception

(you may need to adjust once tuned to a station).

4: Tune to the required station using the TUNING + / -

buttons (11). Pressing either button once advances
the frequency in 0.05MHz increments. Press and hold
either button to search up or down the frequency
range, until a station is located. When a station is
found it will begin playback. You can stop the scan
at any time, by pressing either TUNING + / - button
again.

User instructions

Page 5

User instructions

Radio operation (cont)

NOTE: When receiving an FM broadcast, fully

extend the telescopic antenna and angle it for the
best reception.

5: Adjust the volume to a comfortable listening level

using the volume controls (3).

Saving/recalling radio presets

After tuning to a radio station you may wish to store
the frequency to a preset location, so you can recall
easily at a later date.

1: When tuned to the station you wish to store, press

the MEM/PROG. button (14). You will see ‘PXX’ on the
display (XX indicates the preset location).

2: Use the

SKIP / M- button (5) or SKIP / M+

button (13) to cycle through the preset locations 1-20.

3: Once a preset location number has been selected,

press the MEM/PROG. button (14) to store the
current station to the selected preset location
number.

4: To recall a station saved to a preset location, press

either

SKIP / M- button (5) or SKIP / M+

button (13) to cycle through the preset locations 1-20.
When selected the stored station will begin playback
within 2 seconds.

CD operation

Load a CD

1: Open the CD door using the raised OPEN latch (9).
2: Load a CD onto the disc tray with the label facing up.
3: Close the CD door.

Playing a CD

1: Wake the unit from STANDBY mode if required.
2: Press the POWER/FUNCTION button (15) repeatedly

until you see ‘----’ on the display with ‘CD’ appearing
above it.

3: Follow the steps above to load a disc (if not already

loaded).

4: The player begins to read the disc immediately.
5: When the disc is successfully read, the total number

of tracks on the disc will appear on the LED display (8)
and playback follows with the first track.

Playing a CD (cont)

6: Press the PLAY/PAUSE button (12) once to PAUSE

the music playback, the elapsed track time flashes
to indicate the player is in Pause mode. Pressing the

PLAY/PAUSE button (12) resumes playback.

7: Press the STOP button (4) to cease music playback.

The LCD shows the total number of tracks again.

Skip & search tracks

1: Press the

SKIP / M+ button (13) once during

playback to skip to the next track. To skip to a specific
track ahead, press this button several times until you
reach the track number required.

2: Press the

SKIP / M- button (5) once during

playback to return to the beginning of the current
track. Press the

SKIP / M- button (5) twice

repeatedly to skip to the previous track. To skip back
to a specific track, press this button several times.

3: Hold the

SKIP / M+ button (13) during playback

to fast forward the current track.

4: Hold the

SKIP / M- button (5) during playback to

fast rewind the current track.

Repeat & Random playback

Should you wish to play an entire disc in a random
order, repeat a single track or entire disc, follow the
below steps.

1: During playback of a CD, press the REP/RAN button

(7). After one press you will see the ‘REP’ icon flash in

the bottom right corner of the display, to indicate the
current track will repeat.

2: Press the REP/RAN button (7) again and the ‘REP’

icon will stop flashing and become solid. This
indicates the entire disc will repeat.

3: Press the REP/RAN button (12) once more, you will

see the ‘RAN’ icon appear in the bottom left corner of
the display to indicate the RANDOM function is active.

4: Press the REP/RAN button (12) again. The ‘RAN’ icon

disappears, this indicates all REPEAT and RANDOM
functions have been disabled.

Page 6

User instructions

Programmed playback

To program an alternative playback order of tracks
follow the below steps.

1: Make sure the unit is not playing anything.
2: Press the MEM/PROG. button (14) once. The program

sequence “P01” appears and ‘PROG’ flashes on the
LED display.

3: Select the first track to be programmed using either

SKIP / M+ button (13) or SKIP / M- button (5).

4: Press the MEM/PROG. button (14) again to store and

advance to the next programmed track.
The program sequence indication changes to “P02”
momentarily waiting for your next input.

5: Repeat the steps above to program more tracks.

A maximum of 20 tracks can be programmed.

6: Press the PLAY/PAUSE button (12) to begin the

programmed playback in the preferred order.

7: You can press the STOP button (4) to terminate

programmed playback.

8: In program stop mode, press the STOP button

again to clear the programmed sequence or press
the PLAY/PAUSE button to begin the programmed
playback again.

iPod/iPhone operation

1: Wake the unit from STANDBY mode if required.
2: Press the POWER/FUNCTION button (15) repeatedly

until you see ‘IPOD’ on the display.

3: Connect a compatible iPod / iPhone to the dock

connector (10). Take care when connecting not to
damage the 8 pin (lightning) connector.

VOL+

AUX IN

VOL-

PREP/RAN

POWER/FUNC

MEM/PROG.

PLAY/PAUSE

SKIP-/M-

STOP

SKIP+/M+

TUNING+

TUNING-

iPod/iPhone operation (cont)

4: The unit will begin to play back the last selected track

on your device automatically. If you cant hear any
sound after 20 seconds, remove & re-seat the device.

5: You can now either select audio from your device to

play using the iPod / iPhone’s controls or by using the
buttons on the main unit.

6: While the iPod / iPhone is docked the internal battery

will be charged until full.

NOTE: Charging only occurs during mains power
operation and not while using battery power.

iPod/iPhone controls

Below are descriptions of button functions that
operate with an iPod / iPhone docked.

1: Press the

PLAY/PAUSE button (12) to pause or

resume playback.

2: Press the

STOP button (4) to stop playback.

3: Press the

SKIP / M+ button (13) once during

playback to skip to the next track. To skip to a specific
track ahead, press this button several times until you
reach the track number required.

4: Press the

SKIP / M- button (5) once during

playback to return to the beginning of the current
track. Press the button twice repeatedly to skip to the
previous track. To skip back to a specific track, press
the button several times.

5: Hold the

SKIP / M+ button (13) during playback

to fast forward the current track.

6: Hold the

SKIP / M- button (5) during playback to

fast rewind the current track.

7: Press the REP/RAN button (7), you will see the

REPEAT ONCE icon appear on iPod/iPhone display.

press again and the mode changes to REPEAT ALL.
The iPod/iPhone REPEAT icon will change to indicate

REPEAT ALL is active.

8: Press the REP/RAN button (7) once more, you will

see the SHUFFLE icon appear on the iPod/iPhone
display. One more press of the REP/RAN button (7)
will disable the SHUFFLE mode. The SHUFFLE icon
will disappear from the iPod/iPhone display, and all
REPEAT or SHUFFLE functions will be disbled.

Page 7

Pod/iPhone support pads

Included with the product is a pack of two adhesive
PVA pads. Should you need added support and
vibration protection between the back of your device
and the boombox (dependant on your iPod or iPhone
model) these can be fitted in the appropriate position,
See FIG A.

A single pad can be used separately to give a spacing of
3mm or can be piggybacked one on top of the other to
give a spacing of 6mm (see FIG B).

3mm 3mm

Auxiliary input

It is possible to connect an external audio source like
an MP3 player using a 3.5mm audio cable (not
supplied).

1: Connect one end of the cable to the MP3 players

headphone output and the other end to the AUX input
(2) on the front of the unit.

VOL+

AUX IN

VOL-

PREP/RAN

POWER/FUNC

MEM/PROG.

PLAY/PAUSE

SKIP-/M-

STOP

SKIP+/M+

TUNING+

TUNING-

2: Wake the unit from STANDBY mode if required.
3: Press the POWER/FUNCTION button (15) repeatedly

until you see ‘AU’ on the display.

4: Press PLAY on the external audio source EG:-MP3

player.

NOTE: the volume output is effected by the

volume level on the source EG: MP3 player so
make sure that is set to about 70-80% ( not too

loud to avoid distortion ).

5: Adjust the VOLUME controls on the unit to the

required listening level.

User instructions

FIG A

FIG B

Page 8

User instructions

Care & maintenance

Important: Always unplug the appliance from the power socket during cleaning and maintenance.

Never use any sharp instruments or abrasive substances, soap, household cleaner, detergent or wax polish for
cleaning.

Clean the external surfaces with a damp soft cloth only. Never use abrasive products or solvents as it may
damage the appliance.

Troubleshooting

In the unlikely event of difficulties with your appliance please follow the trouble shooting guide below.
If the problem persists, contact the retailer if the machine is still under guarantee.
Customer helpline: 0870 600 3030

Problem Reason(s) Solution(s)

No Power • Power cable not connected to

wall socket

• Power socket is not switched on

• Make sure the plug is connected

• Switch the power on

No Sound CD/AUX/RADIO/IPOD

No Sound from AUX input

• Volume is too low

• iPod/iPhone not docked
correctly

• AUX source volume is too low

• Increase the volume

• Re-dock the iPod/iPhone

• Increase the output volume of the
AUX source.

Sound is distorted
Sound is distorted from AUX
input

• Volume is too high

• AUX source volume is too high

• Reduce the volume

• Reduce the output volume of the AUX
source.

Unable to Play • No disc in the tray

• Disc not loaded properly

• Disc is dirty

• Insert a compatible disc

• Check the disc loaded

• Clean the disc

Static Sound • Poor reception • Re-locate the antenna (FM)

Unit switches off after 20
minutes of inactivity

• Auto standby mode in operation • This unit is designed to enter
STANDBY mode automatically after
20 MINUTES of inactivity. Press the
STANDBY button to wake the unit.

Page 9

User instructions

Technical specifications

General

Power • Mains adaptor : 100-240V ~ 50/60Hz

• Mains adaptor output : 10V

DC 2000mA

• Battery : 12V 8 X 1.5V ‘C’ Size (UM-2)

Power Consumption • 20 Watts
Dimensions • Approx. 235mm(L) x 255mm(W) x 125mm(H)
AUX In • 3.5mm stereo socket

Tuner

FM • 87.5 - 108 MHz

CD Player

Playback system • Compact Disc Digital Audio System
DAC • 1 Bit DA converter with 8 x over sampling.
Frequency response • 20Hz-20KHz
S/N ratio

• ≥45dB

Dynamic range • 90dB

Audio

Output Power • 2W x 2 (RMS)
Speaker impedance • 8 ohms
Disc Compatibility
Disc Type • CD-DA/CD-R/CD-RW
Size • 12cm & 8cm

Compatible iPod / iPhone list

Made for:

iPhone 5, iPhone 5c, iPhone 5s, iPhone 6
iPod nano (7th generation)
iPod touch (5th generation)

PLAY & CHARGE THROUGH THE iPod / iPhone CONNECTION

iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
iPhone is a trademark of Apple Inc.

Made for iPod,” and “Made for iPhone,” mean that an electronic accessory has been designed to connect specifically
to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple
is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please
note that the use of this accessory with iPod or iPhone may affect wireless performance

iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S. and other
countries. Lightning is a trademark of Apple Inc.

Page 10

Guarantee

PRODUCT GUARANTEE

This product is guaranteed against manufacturing defects for a period of

Year

This product is guaranteed for twelve months from the date of original purchase.

Any defect that arises due to faulty materials or workmanship will either be replaced,
refunded or repaired free of charge where possible during this period by the dealer from
whom you purchased the unit.

The guarantee is subject to the following provisions:

The guarantee does not cover accidental damage, misuse, cabinet parts, knobs or

consumable items.
The product must be correctly installed and operated in accordance with the instructions

contained in this manual.

It must be used solely for domestic purpose.

The guarantee will be rendered invalided if the product is re-sold or has been damaged by

inexpert repair.
Specifications are subject to change without notice.
The manufacturer disclaims any liability for the incidental or consequential damages.
The guarantee is in addition to, and does not diminish your statutory or legal rights.

Guarantor: Argos Limited

489 - 499 Avebury Boulevard

Central Milton Keynes

MK9 2NW