You’ll soon be enjoying your new Electrical Cooker.
It all begins here, with your instructions. Don’t worry,
there’s nothing too technical coming up. Just simple,
step-by-step guidance to get you up and running
quickly. Sound good? Then let’s get started.
Help and Guidance
We’re here to help you get the most from your Electrical Cooker. Should you require any
guidance, a simple solution can often be found online at:
www.argos-support.co.uk
If you still require further assistance, call one of our experts on 0345 257 7271.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
2
Contents
Safety information
1
Safety information 6
Getting to know your electrical
2
cooker
Care and Maintenance
6
Cleaning 28
Maintenance 29
Ready? Let’s begin 10
Product Features 11
Control Panel 11
Installing your electrical cooker
3
Installation and preparation for use 14
Electrical Connection and Safety 15
Functions
4
Oven Controls 18
Use of the Digital Timer 19
Using your electrical cooker
5
Accessories 24
Technical Specifications 25
Product support
7
Troubleshooting 32
Transport 32
Help and assistance 33
Declaration of conformance to product
standards 34
Disposal 34
Guarantee 35
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.
3
Safety information
1
Safety information
Important - Please read these instructions fully before
installing or operating
• Carefully read all instructions before using your
appliance and keep them in a convenient place for
reference when necessary.
• This manual has been prepared for more than one
model therefore your appliance may not have some
of the features described within. For this reason, it is
important to pay particular attention to any figures
whilst reading the operating manual.
General Safety Warnings
• This appliance can be used by children aged from
8 years and above and by persons with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use
of the appliance in a safe way and understand the
hazards involved. Children should not play with the
appliance. Cleaning and user maintenance should
not be made by children without supervision.
WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to avoid
touching heating elements. Keep children less than 8
years of age away unless they are continually
supervised.
WARNING: Danger of fire: Do not store items
on the cooking surfaces.
WARNING: If the surface is cracked, switch
off the appliance to avoid the possibility of electric
shock.
• Do not operate the appliance with an external timer
or separate remote-control system.
• During use the appliance will get hot. Care should
be taken to avoid touching heating elements inside
the oven.
• Handles may get hot after a short period during use.
• Do not use harsh abrasive cleaners or scourers to
clean oven surfaces. They can scratch the surfaces
which may result in shattering of the door glass or
damage to surfaces.
• Do not use steam cleaners for cleaning the
appliance.
WARNING: To avoid the possibility of electric
shock, make sure that the appliance is switched off
before replacing the lamp.
CAUTION: Accessible parts may be hot when
cooking or grilling. Keep young children away from the
appliance while it is in use.
• During pyrolytic operations, remove any excess
spillage, oven shelves, shelf supports, wire shelves
and all accessories before cleaning.
• Your appliance is produced in accordance with all
applicable local and international standards and
regulations.
• Maintenance and repair work should only be carried
out by authorised service technicians. Installation
and repair work that is carried out by unauthorised
technicians may be dangerous. Do not alter or
modify the specifications of the appliance in any
way. Inappropriate hob guards can cause accidents.
• Before connecting your appliance, make sure
that the local distribution conditions (nature of
the gas and gas pressure or electricity voltage and
frequency) and the specifications of the appliance
are compatible. The specifications for this appliance
are stated on the label.
CAUTION: This appliance is designed only for
cooking food and is intended for indoor domestic
household use only. It should not be used for any other
purpose or in any other application, such as for nondomestic use, in a commercial environment or for
heating a room.
• Do not use the oven door handles to lift or move
the appliance.
• All possible measures have been taken to ensure
your safety. Since the glass may break, care should
be taken while cleaning to avoid scratching. Avoid
hitting or knocking the glass with accessories.
• Make sure that the supply cord is not trapped or
damaged during installation. If the supply cord is
damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in
order to prevent a hazard.
• Do not let children climb on the oven door or sit on
it while it is open.
Installation Warnings
• Do not operate the appliance before it is fully
installed.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Safety information6
Safety information
Important - Please read these instructions fully before
installing or operating
• The appliance must be installed by an authorised
technician. The manufacturer is not responsible
for any damage that might be caused by defective
placement and installation by unauthorised people.
• When the appliance is unpacked, make sure that
it is has not been damaged during transportation.
In the case of a defect do not use the appliance
and contact a qualified service agent immediately.
The materials used for packaging (nylon, staplers,
styrofoam, etc.) may be harmful to children and
they should be collected and removed immediately.
• Protect your appliance against atmospheric effects.
Do not expose it to effects such as sun, rain, snow,
dust or excessive humidity.
• The material around the appliance must be able to
withstand a minimum temperature of 100°C.
During Use
• When you first use your oven you may notice a
slight smell. This is perfectly normal and is caused
by the insulation materials on the heater elements.
We suggest that, before using your oven for the first
time, you leave it empty and operate it at maximum
temperature for 45 minutes. Make sure that the
environment in which the product is installed is well
ventilated.
• Take care when opening the oven door during or
after cooking. The hot steam from the oven may
cause burns.
• Do not put flammable or combustible materials in
or near the appliance while it is operating.
• Always use oven gloves to remove and replace food
in the oven.
Do not leave the cooker unattended while
cooking with solid or liquid oils. They may catch fire
under extreme heating conditions. Never pour water
on to flames that are caused by oil, instead switch the
cooker off and cover the pan with its lid or a fire
blanket.
spill or drop hot food while removing it from the
oven.
• Do not place anything on the oven door when it is
open. This could unbalance the oven or damage
the door.
• Do not place heavy or flammable items (e.g. nylon,
plastic bag, paper, cloth, etc.) into the drawer. This
includes cookware with plastic accessories (e.g.
handles).
• Do not hang towels, dishcloths or clothes from the
appliance or its handles.
During Cleaning and Maintenance
• Make sure that your appliance is turned off at
the mains before carrying out any cleaning or
maintenance operations.
• Do not remove the control knobs to clean the
control panel.
• To maintain the efficiency and safety of your
appliance, we recommend you always use original
spare parts and to call our authorised service agents
in case of need.
CE Declaration of conformity
We declare that our products meet the
applicable European Directives,
Decisions and Regulations and the
requirements listed in the standards
referenced.
This appliance has been designed to be used only for
home cooking. Any other use (such as heating a room)
is improper and dangerous.
The operating instructions apply to several
models. You may notice differences between these
instructions and your model.
• If the product will not be used for a long period of
time, turn the main control switch off. Turn the gas
valve off when a gas appliance is not in use.
• Make sure the appliance control knobs are always in
the “0” (stop) position when it is not in use.
• The trays incline when pulled out. Take care not to
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.
Safety information7
Getting to know your electrical
cooker
2
Getting to know your electric cooker
You’ll be up and running in no time
Ready? Let’s begin...
Please read these instructions carefully. They contain
important information which will help you get the
best from your Electrical Cooker and ensure safe and
correct installation and operation.
If you require any further assistance, our technical
experts are happy to help. For full details, refer to
the product support section at the end of these
instructions.
10
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Getting to know your
Electrical
Cooker
Getting to know your electric cooker
You’ll be up and running in no time
Product features
Important: Specifications for the product vary and
the appearance of your appliance may differ from
that shown in the figures below.
List of Components
Accessorries
The Grill Pan and Handle Set
The Wire Grid
1
1. Control Panel
2
3
2. Oven Door Handle
3. Oven Door
Control panel
1. Oven Function Control Knob
2. Digital Timer
3. Oven Thermostat Control Knob
123
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.
Getting to know your
Electrical
Cooker
11
Installing your
electrical
cooker
3
Installing your electric cooker
Bringing it all together
Installation and preparation for use
WARNING : This appliance must be installed by an
authorised service person or qualified technician,
according to the instructions in this guide and in
compliance with the current local regulations.
Incorrect installation may cause harm and damage, for
which the manufacturer accepts no responsibility and
the warranty will not be valid.
Prior to installation, ensure that the local distribution
conditions (electricity voltage and frequency) and the
adjustments of the appliance are compatible. The
adjustment conditions for this appliance are stated on
the label.
The laws, ordinances, directives and standards in
force in the country of use are to be followed (safety
regulations, proper recycling in accordance with the
regulations, etc.).
Instructions for the Installer
General instructions
After removing the packaging material from the
appliance and its accessories, ensure that the appliance
is not damaged. If you suspect any damage, do not use
it and contact an authorised service person or qualified
technician immediately.
Make sure that there are no flammable or combustible
materials in the close vicinity, such as curtains, oil, cloth
etc. which may catch fire.
The worktop and furniture surrounding the appliance
must be made of materials resistant to temperatures
above 100°C.
The appliance should not be installed directly above a
dishwasher, fridge, freezer, washing machine or clothes
dryer.
A (mm)557min./max. F (mm)560/580
B (mm)550min. G (mm)555
C (mm)595min. H (mm)590
D (mm)575min. I (mm)600
E (mm)576min. J/K (mm)5/10
Installation under a worktop
AB
F
C
C
C
Installation in a wall unit
H
I
J
HJI
F
G
E
G
D
K
A
E
D
J
B
C
1. After making the electrical connections, insert the
oven into the cabinet by pushing it forward. Open
the oven door and insert 2 screws in the holes
located on the oven frame. While the product
frame touches the wooden surface of the cabinet,
tighten the screws.
Installation of the Oven
The appliances are supplied with installation kits and
can be installed in a worktop with the appropriate
dimensions. The dimensions for hob and oven
installation are given below.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
14
Installing your
Electrical
If the oven is installed under a hob:
1. The distance between the worktop and the top
Cooker
Installing your electric cooker
Bringing it all together
panel of the oven must be a minimum of 50 mm
and the distance between the worktop and the top
of control panel must be a minimum of 25 mm.
Worktop
min. 25 mm
min. 50
mm
1. The distance between the base of the hob and the
top panel of the oven must be a minimum of 10
mm for air circulation.
min. 10
mm
Hob
Oven
personnel.
Do not use adaptors, multiple sockets and/or extension
leads.
The supply cord should be kept away from hot parts
of the appliance and must not be bent or compressed.
Otherwise the cord may be damaged, causing a short
circuit.
If the appliance is not connected to the mains with a
plug, a multi-pole isolator switch (with at least 3 mm
contact spacing) must be used in order to meet the
safety regulations.
The appliance is designed for a power supply of 220240V ~ and 380-415V 3N~. If your supply is different,
contact the authorised service person or a qualified
electrician.
The power cable (H05VV-F) must be long enough to
be connected to the appliance, even if the appliance
stands on the front of its cabinet.
Ensure all connections are adequately tightened.
Fix the supply cable in the cable clamp and then close
the cover.
Electrical Connection and Safety
WARNING: The electrical connection of this
appliance should be carried out by an authorised
service person or qualified electrician, according to the
instructions in this guide and in compliance with the
current local regulations.
WARNING: THE APPLIANCE MUST BE EARTHED.
Before connecting the appliance to the power supply,
the voltage rating of the appliance (stamped on the
appliance identification plate) must be checked for
correspondence to the available mains supply voltage,
and the mains electric wiring should be capable of
handling the appliance’s power rating (also indicated
on the identification plate).
During installation, please ensure that isolated cables
are used. An incorrect connection could damage your
appliance. If the mains cable is damaged and needs
to be replaced this should be done by a qualified
The terminal box connection is placed on the terminal
box.
Blue
Brown
Yellow+Green
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.
Installing your
Electrical
Cooker
15
Functions
4
Functions
Simple everyday use
Oven Controls
Oven function control knob
Turn the knob to the corresponding symbol of the
desired cooking function. For the details of different
functions see ´Oven Functions`.
Oven thermostat knob
After selecting a cooking function, turn this knob to set
the desired temperature. The oven thermostat light will
illuminate whenever the thermostat is in operation to
heat up the oven or maintain the temperature.
Oven Functions
* The functions of your oven may be different due to
the model of your product.
Defrost Function: The oven’s
warning lights will switch on and the
fan will start to operate. To use the
defrost function, place your frozen
food in the oven on a shelf in the
third slot from the bottom. It is
recommended that you place an oven tray under the
defrosting food to catch the water accumulated due to
melting ice. This function will not cook or bake your
food, it will only help to defrost it.
Turbo Function: The oven’s
thermostat and warning lights will
switch on, and the ring heating
element and fan will start operating.
The turbo function evenly disperses
the heat in the oven so all food on all racks will cook
evenly. It is recommended that you preheat the oven
for about 10 minutes.
Static Cooking Function: The
oven’s thermostat and warning
lights will switch on, and the lower
and upper heating elements will
start operating. The static cooking
function emits heat, ensuring even
cooking of food. This is ideal for making pastries, cakes,
baked pasta, lasagne and pizza. Preheating the oven for
10 minutes is recommended and it is best to use only
one shelf at a time in this function.
Fan Function: The oven’s thermostat
and warning lights will switch on,
and the upper and lower heating
elements and fan will start operating.
This function is good for baking
pastry. Cooking is carried out by the
lower and upper heating elements within the oven and
by the fan, which provides air circulation, giving a
slightly grilled effect to the food. It is recommended
that you preheat the oven for about 10 minutes. The
fan and lower heating function is ideal for baking food,
such as pizza, evenly in a short period of time. The fan
evenly disperses the heat of the oven, while the lower
heating element bakes the food.
Grilling Function: The oven’s
thermostat and warning lights will
switch on, and the grill heating
element will start operating. This
function is used for grilling and
toasting foods on the upper shelves
of the oven. Lightly brush the wire grid with oil to stop
food sticking and place food in the centre of the grid.
Always place a tray beneath the food to catch any drips
of oil or fat. It is recommended that you preheat the
oven for about 10 minutes.
Warning: When grilling, the oven door must be
closed and the oven temperature should be
adjusted to 190°C.
Faster Grilling Function: The oven’s
thermostat and warning lights will
switch on, and the grill and upper
heating elements will start operating.
This function is used for faster
grilling and for grilling food with a
larger surface area, such as meat. Use the upper
shelves of the oven. Lightly brush the wire grid with oil
to stop food sticking and place food in the centre of
the grid. Always place a tray beneath the food to catch
any drips of oil or fat. It is recommended that you
preheat the oven for about 10 minutes.
Warning: When grilling, the oven door must be
closed and the oven temperature should be
adjusted to 190°C.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Functions18
Functions
Simple everyday use
Double Grill and Fan Function: The
oven’s thermostat and warning
lights will switch on, and the grill,
upper heating elements and fan will
start operating. This function is used
for faster grilling of thicker food and
for grilling of food with a larger surface area. Both the
upper heating elements and grill will be energised
along with the fan to ensure even cooking. Use the
upper shelves of the oven. Lightly brush the wire grid
with oil to stop food sticking and place food in the
centre of the grid. Always place a tray beneath the food
to catch any drips of oil or fat. It is recommended that
you preheat the oven for about 10 minutes.
Warning: When grilling, the oven door must be
closed and the oven temperature should be
adjusted to 190°C.
Pyrolytic Cleaning Function: This function
allows you to clean the inside of the oven
thoroughly.
Warning: Before activating the pyrolytic cleaning
function, remove any excessive spillage and make
sure that the oven is empty. Do not leave anything
inside the oven cavity in order to prevent damage.
Before activating the pyrolytic cleaning function,
remove the wire oven shelves and shelf supports (if
available) and ensure the oven door is closed.
“000” will flash on the display screen.
1.Press the “+” and “-” buttons
simultaneously. The dots in the
middle of the screen will start to
flash.
2. Adjust the time using the “+”
and “-” buttons while the dots are
flashing.
3. After a few seconds, the dots
will stop flashing and will remain
illuminated.
Audible warning time adjustment
The audible warning time can be set to any time
between 0:00 and 23:59 hours. The audible warning
time is for warning purposes only, the oven will not be
activated with this function.
1. Press “MODE”. The symbol
start flashing and “000” will appear.
will
The oven door will lock when the pyrolytic function
starts.
When the pyrolytic cleaning function is on, it is
advisable not to use a hob if it is fitted above the oven.
This could cause overheating and damage to both
appliances.
During the pyrolytic cleaning cycle the oven door will
become hot. Children should be kept away until it has
cooled.
At the end of pyrolytic cleaning process, the display will
show the time of day.
Use of the Digital Timer
Time adjustment
The time must be set before you start using the oven.
Following the power connection, the symbol “A” and
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.
When the timer reaches zero, an audible warning will
sound and the symbol will flash. Press any key to
stop the sound and the symbol will disappear.
Semi-automatic time adjustment (cooking period)
2. Select the desired time period
using the “+” and “-” keys while is
flashing.
3. The symbol will remain
illuminated, the time will be saved
and the warning will be set.
Functions19
Functions
Simple everyday use
This function helps you to cook for a fixed period of
time. A time range between 0 and 10 hours can be set.
Prepare the food for cooking and put it in the oven.
1. Select the desired cooking function and the
temperature using the control knobs.
2. Press “MODE” until you see “dur”
on the screen. The symbol “A” will
flash.
3. Select the desired cooking time
period using the “+” and “-” buttons.
4. The current time of day will
reappear on the screen, and the
symbols “A” and will remain
illuminated.
When the timer reaches zero, the oven will switch off,
an audible warning will sound and the symbol “A” will
flash. Turn both control knobs to the “0” position and
press any button on the timer to stop the sound. The
symbol will disappear and the timer will switch back to
manual function.
Semi-automatic time adjustment (finishing time)
3. Use the “+” and “-” buttons to set
the desired finishing time.
4. The current time will reappear on
the screen, ´and the symbols “A”
and will remain illuminated.
When the timer reaches zero, the oven will switch
off, an audible warning will sound and the symbol “A”
will flash. Turn both control knobs to the “0” position
and press any key on the timer to stop the sound. The
symbol will disappear and the timer will switch back to
manual function.
Full-automatic programming
This function is used to start cooking after a certain
period of time and for a certain duration. A time of up
to 10 hours after the current time of day can be set.
Prepare the food for cooking and put it in the oven.
1. Select the desired cooking function and the
temperature using the control knobs.
2. Press “MODE” until you see “dur”
on the screen. The symbol “A” will
flash.
This function automatically starts the oven so that
cooking will finish at a set time. You can set an end
time of up to 10 hours after the current time of day.
Prepare the food for cooking and put it in the oven.
1. Select the desired cooking function and the
temperature using the control knobs.
2. Press “MODE” until you see “end”
on the screen. The symbol “A” and
the current time of day will start to
flash.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Functions20
3. Select the desired cooking time
period using the “+” and “-” buttons.
4. The current time will reappear on
the screen, ´and the symbols “A”
and will remain illuminated.
Functions
Simple everyday use
5. Press “MODE” until you see “end”
on the screen. The symbol “A” and
the current time of day will flash.
6. Select the desired finishing time
using the “+” and “-” buttons.
7. Add the cooking period to the
current time of day. You can set
a time of up to 23 hours and 59
minutes after this.
8. The current time will reappear
on the screen, ´and the symbols
“A” and will remain illuminated.
The operating time will be calculated and the oven will
automatically start so that cooking will finish at the set
finishing time. When the timer reaches zero, the oven
will switch off, an audible warning will sound and the
symbol “A” will flash. Turn both control knobs to the
“0” position and press any key to stop the sound. The
symbol will disappear and the timer will switch back to
manual function.
Sound Adjustment
To adjust the volume of the audible warning sound,
press the “MODE” button three times while the signal is
sounding. The oven function selector knob must be at
the “0” position. “L3” will appear on the display screen.
Press the “+” and “-” buttons to adjust the sound level.
Release the buttons and, after a few seconds, the signal
sound volume will be set.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.
Functions21
Using your electrical cooker
5
Using your electrical cooker
Looking after your appliance
Accessorries
The Grill Pan and Handle Set
The grill pan set is best used for grilling steaks and
similar foods.
WARNING: The grill pan has a detachable handle.
Make sure when using the grill pan handle that it is
centralised and secure, as shown in the figure. Do not
leave the handle in position while grilling is in
operation.
The Water Collector
In some cases of cooking, condensation may appear
on the inner glass of the oven door. This is not a
product malfunction.
The Wire Grid
The wire grid is best used for grilling or for processing
food in oven-friendly containers.
WARNING
The wire grid is used for grilling or for processing food
in other containers.
Open the oven door into the grilling position and leave
it in this position for 20 seconds.
Water will drip to the collector.
Cool the oven and wipe the inside of the door with a
dry towel. This procedure must be applied regularly.
24
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Using your electrical cooker
Using your electrical cooker
Looking after your appliance
Technical Specifications
BrandBush
Model
Power Supply
Maximum Power2600W
Size (H x W x D)595 x 595 x 570 mm
Type of OvenElectric
Mass (Kg)37 (+/-2)
Number of Cavities1
Heat SourceElectric
Volume (l)
Energy Consumption (electricity) - conventional (kWh/cycle)0.98
Energy Consumption (electricity) - fan assisted (kWh/cycle)0.87
Energy Efficiency Index - conventional117.3
Energy Efficiency Index - fan assisted104.1
Energy ClassA
BBISGLPYROBLK
BBISGLPYROSS
230V~
68
Energy Saving Tips
• Cook the meals together, if possible.
• Keep the pre-heating time short.
• Do not elongate cooking time.
• Do not forget to turn off the oven at the end of cooking.
• Do not open oven door during cooking period.
Note: This oven complies with EN-60350-1 and the hob complies with EN 63350-2
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.
Using your electrical cooker
25
Care and maintenance
6
Care and maintenance
Looking after your appliance
Cleaning
WARNING: Switch off the appliance and allow it to
cool before cleaning is to be carried out.
General Instructions
• Check whether the cleaning materials are
appropriate and recommended by the
manufacturer before use on your appliance.
• Use cream cleaners or liquid cleaners which do
not contain particles. Do not use caustic (corrosive)
creams, abrasive cleaning powders, rough wire
wool or hard tools as they may damage the cooker
surfaces.
Do not use cleaners that contain particles as they
may scratch the glass, enamelled and/or painted
parts of your appliance.
• Should any liquids overflow, clean them
immediately to avoid parts becoming damaged.
Do not use steam cleaners for cleaning any part of
the appliance.
Cleaning the Inside of the Oven
• The inside of enamelled ovens are best cleaned
while the oven is warm.
• Wipe the oven with a soft cloth soaked in soapy
water after each use. Then, wipe the oven over
again with a wet cloth and dry it.
• You may need to use a liquid cleaning material
occasionally to completely clean the oven.
damaged during pyrolytic cleaning.
• The oven cavity is coated with a special enamel
that is resistant to high temperatures. During the
pyrolytic cleaning operation, the temperature inside
the oven can reach about 475⁰C.
• The oven door will automatically lock, for your
safety, while the pyrolytic cleaning function is
in operation. After the cleaning is complete, the
cooling fan will begin operating and the oven will
remain locked until it has cooled.
• It is advisable to wipe the oven down with a sponge
soaked in warm water, after each cooking operation
or pyrolytic cleaning cycle has been carried out.
• During the pyrolytic operation, a smell and some
fumes will emanate due to the destruction of
food residue within the oven. This is normal. Oven
cleaning fumes could be fatal to birds, children and
pets so all should be kept away until the operation is
complete.
• The area where the oven is installed should be
kept well-ventilated, especially during the pyrolytic
cleaning function, and any doors leading into the
area should be closed to avoid passing the smell
and fumes throughout.
Cleaning the Glass Parts
• Clean the glass parts of your appliance on a regular
basis.
• Use a glass cleaner to clean the inside and outside
of the glass parts. Then, rinse and dry them
thoroughly with a dry cloth.
Pyrolytic cleaning
WARNING: Before activating the pyrolytic cleaning
function, remove any excessive spillage and make
sure that the oven is empty. Do not leave anything
inside the oven, such as wire grids, trays, or oven
shelves and supports (if available), as they could be
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
28
Care and maintenance
Cleaning the Stainless Steel Parts (if available)
• Clean the stainless steel parts of your appliance on
a regular basis.
• Wipe the stainless steel parts with a soft cloth,
soaked in only water. Then, dry them thoroughly
with a dry cloth.
Do not clean the stainless steel parts while they
are still hot from cooking.
Do not leave vinegar, coffee, milk, salt, water,
lemon or tomato juice on the stainless steel for a
long time.
Care and maintenance
Looking after your appliance
Removal of the Oven Door
Before cleaning the oven door glass, you must remove
the oven door, as shown below.
1. Open the oven door.
2. Open the saddle bracket (a) (with the aid of a
screwdriver) up to the end position.
a
Maintenance
WARNING: The maintenance of this appliance
should be carried out by an authorised service
person or qualified technician only.
Changing the Oven Lamp
WARNING: Switch off the appliance and allow it to
cool before cleaning your appliance.
a
3. Close the door until it almost reaches the fully
closed position and remove the door by pulling it
towards you.
Removal of the Wire Shelf
• Remove the glass lens, then remove the bulb.
• Insert the new bulb (resistant to 300 °C) to replace
the bulb that you removed (230 V, 15-25 Watt, Type
E14).
• Replace the glass lens, and your oven is ready for
use.
The lamp is designed specifically for use in
household cooking appliances. It is not suitable
for household room illumination.
To remove the wire rack, pull the wire rack as shown in
the figure. After releasing it from the clips (a), lift it up.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.
Care and maintenance
29
Product support
7
Product support
Help is always at hand
Troubleshooting
If you still have a problem with your appliance after checking these basic troubleshooting steps, please
contact an authorised service person or qualified technician.
ProblemPossible CauseSolution
Check whether there is power supplied.
Oven does not switch on.Power is switched off.
Oven temperature control is
No heat or oven does not warm up.
Oven light (if available) does not operate.
Cooking is uneven within the oven.
The appliance door cannot be opened; the
door lock symbol or signal lamp lights up on
the display.
The timer buttons cannot be pressed
properly.
The oven fan is noisy.Oven shelves are vibrating.
After the “pyrolysis” cleaning cycle, it is not
possible to select a function.
incorrectly set.
Oven door has been left open.
Lamp has failed.
Electrical supply is
disconnected or switched off.
Oven shelves are incorrectly
positioned.
The appliance door is locked
due to the pyrolytic function.
There is foreign matter caught
between the timer buttons.
Touch model: there is
moisture on the control panel.
The key lock function is set.
The oven cools itself by
operating the cooling fan after
“pyrolysis”.
Also check that other kitchen appliances are
working.
Check that the oven temperature control
knob is set correctly.
Replace lamp according to the instructions.
Make sure the electrical supply is switched
on at the wall socket outlet.
Check that the recommended temperatures
and shelf positions are being used.
Do not frequently open the door unless you
are cooking things that need to be turned.
If you open the door often, the interior
temperature will be lower and this may
affect the results of your cooking.
Wait until the cooking compartment has
cooled and the door lock symbol goes out.
Remove the foreign matter and try again.
Remove the moisture and try again.
Check whether the key lock function is set.
Check that the oven is level.
Check that the shelves and any bake ware
are not vibrating or in contact with the oven
back panel.
Verify whether the door locking device has
switched off. If it has not, the oven is still
in the cooling period. During the cooling
fan period, no cooking function can be
operated.
Transport
If you need to transport the product, use the original product packaging and carry it using its original case. Follow
the transport signs on the packaging. Tape all independent parts to the product to prevent damaging the product
during transport.
If you do not have the original packaging, prepare a carriage box so that the appliance, especially the external
surfaces of the product, is protected against external threats.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Product support32
Product support
Help is always at hand
Help and assistance
If you require any technical guidance or find that your <enter product name> is not operating as intended, a simple
solution can often be found in the Troubleshooting section of these instructions or online at
www.argos-support.co.uk
If you still require further assistance, call one of our experts on 0345 257 7271*. To help give us give you a fast and
efficient service please have the following information ready:
Model Ref.
Serial number
Date of purchase
Local call rates applies*
You can find these on
the rating plate - a small
information panel (usually
a sticker or metal plate) on
the rear of your appliance
This will be shown on
your receipt
Lines open 8am-7pm Monday to Saturday and 10am-4pm Sunday.
*Calls to Argos enquiry lines may attract a charge and set up fee from residential lines depending on your call plan/tari. Mobile and other
providers costs may vary, see www.bt.com/pricing for details.
For Security and training purposes, telephone calls to and from customer service centres maybe recorded and monitored. Calls from
Republic of Ireland will attract international call charges.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.
Product support33
Product support
Help is always at hand
Declaration of conformance to
product standards
We declare that our products meet the applicable
European Directives, Decisions and Regulations and
the requirements listed in the standards referenced.
We apologise for any inconvenience caused by any
minor inconsistencies in these instructions , which
may occur as a result of product improvemenst and
development.
Disposal
• The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it shall be handed over to the applicable
collection point for the recycling of
electrical and electronic equipment.
• By ensuring this product is disposed of correctly,
you will help prevent potential negative
consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product.
• For more detailed information about recycling of
this product, please contact your local city office,
your household waste disposal service or the shop
where you purchased the product.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Product support34
Product support
Help is always at hand
Call us now and activate your 12 month guarantee
Thank you for choosing Bush. Your new product is guaranteed against faults and
breakdowns for 12 months. Don’t forget to register it with us today so we can provide you
with our best possible after-sales service and useful updates.
www.bushregistration.co.uk
FREEPHONE*
0800 597 8548
Lines are open 8am - 8pm, 365 days a year. *Calls may be recorded and monitored.
Your Bush Guarantee
This product is guaranteed for twelve months from the date of original purchase. Any defect that arises due to
faulty materials or workmanship will be repaired free of charge (or if applicable the product will be replaced or the
purchase price refunded) where possible during this period by the dealer from who your purchased the unit.
The guarantee is subject to the following provisions:
• The guarantee does not cover accidental damage,
misuse, cabinet parts, knobs or consumable items.
• The product must be correctly installed and
operated in accordance with the instructions
contained in the manual.
• It must be used solely for domestic purposes. The
guarantee will be rendered invalid if the product is
re-sold or has been damaged by inexpert repair.
• Specifications are subject to change without notice.
• Bush disclaim any liability for loss or damage arising
from the breakdown of the product.
• This guarantee is in addition to and does not
diminish your statutory or legal rights.
Important Data Protection Information
If you provide us with information about another
person, you confirm that they have appointed you
to act for them, to consent to the processing of their
personal data including sensitive personal data and
that you have informed them of our identity and the
purposes (as set out in the Important Data Privacy
notice displayed overleaf) for which their personal data
will be processed.
You are entitled to ask for a copy of the information
we hold about you (for which we may charge a small
fee) and to have any inaccuracies in your information
corrected.
For quality control and training purposes, we may
monitor or record your communications with us.
If your personal details change, if you change your
mind about any of your marketing preferences or if you
have any queries about how we use your information,
please let us know by contacting our Data Protection
Officer, Domestic & General, Leicester House
17 Leicester Street, Bedworth, Warwickshire
CV12 8JP.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.
Product support35
Contact:
www.argos-support.co.uk
Helpline: 0345 257 727152196255 06/16
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.