Burnham Blowdown Heat Recovery System User Manual

Blowdown Heat Recovery System

Flash Economizer

• Reduces dissolved solids from the top level of water

in the boiler.

• Recovers heat from surface blowdown to heat boiler

feed or make-up water.

• ASME Section VII code-stamped ash separator and coil.

• Separator is sized to accommodate a given percent

surface blowdown/ow rate from boiler operating
pressure to a given vent psig.

• Coil is sized to accommodate make-up ow rate at

between 8 and 18 psig pressure drop.

• Model Range: HR-39 (3 GPM blowdown/9 GPM make-up)

through HR-30150 (30 GPM blowdown/150 GPM make-up).

• Complete system congured to include: ash separator

mounted above and anged to a stainless steel or copper
coil on stainless steel stand with trap, ball valve, gauge
glass, safety valve, 3 thermometers and factory piping.

• Stainless steel striking plate standard.

• Flash separator anged to coil section for ease or removal

for cleaning.

• Openings to facilitate cleaning and inspection standard.

• Options include multiple boiler manifold and mounting

of conductivity controller.

Blowdown Heat Recovery System FLASH ECONOMIZER

Specications

MODEL

HR-39 3 9 9 97 50 36 10 1 2-1/2 1 1

HR-315 3 15 9 96 44 44-1/4 8 1 2-1/2 1 3/4

HR-612 6 12 8 111 53 46 12 1-1/2 3 1 1-1/4

HR-630 6 30 10 110 49 50 10 1-1/2 3 1 3/4

HR-1020 10 20 13 106 50 44 16 1-1/2 4 2 1-1/2

HR-1050 10 50 10 100 44 42 16 1-1/2 4 2 1-1/4

HR-2040 20 40 18 140 67 62 18 1-1/2 6 2 2

HR-20100 20 100 10 140 67 62 18 1-1/2 6 2 1-1/2

HR-3060 30 60 15 172 76 85 18 1-1/2 6 – 8 2 1-1/2

HR-30150 30 150 18 132-1/2 67 53-1/4 24 1-1/2 6 – 8 2 2-1/2

* Across water coil at maximum ow.
Constructed in accordance with ASME Code, Section VIII, Division 1, for MAWP of 150 PSIG.
Hydrostatic tested at 225 PSIG. Safety Relief Valve set at 150 PSIG.

Blowdown Capacity

GPM

Make-up Capacity

GPM

Pressure Drop*

PSI A B C D E F G H

©2012 Burnham Commercial
P.O. Box 3939 • Lancaster, PA 17604
Phone: [phone] • Fax: [phone]
www.burnhamcommercial.com

Form No. PL81465601011-12/12-1Mc
Printed in the U.S.A.