OWNER´S MANUAL
082 inteGrated amPliFier
classic line
Dear Audiophile,
Thank you for choosing this Burmester audio component. We sincerely appreciate your trust in us.
You have purchased a unit which excels in musical fidelity and combines uncompromising manufacturing quality with technical innovation and the highest degree of operating flexibility.
We recommend reading this user manual at least once in its entirety before initial operation. This will enable you to make full use of all capabilities of this outstanding audiophile instrument.
Should you have any further questions, please contact your dealer or us directly.
Talk to us about your special requests, even if they seem out of the ordinary. We happily accept technical reasonable challenges.
Enjoy your enhanced listening pleasure.
Your Burmester Team
C O N T E N T
UNPACKING AND SETTING UP |
1 |
FUNCTIONAL OVERWIEW OF FRONT AND REAR PANEL |
2 |
CONNECTIONS |
3-4 |
OPERATING CONTROLS |
5-6 |
REMOTE CONTROL |
6 |
THE SETUP MENU |
7 |
ERROR PROTECTION |
8 |
BURLINK |
9 |
GENERAL INSTRUCTIONS |
10 - 11 |
TECHNICAL SPECIFICATIONS |
12 |
UNPACKING AND SETTING UP
CAUTION: The integrated amplifier 082 is very heavy. To avoid injury during unpacking and set-up, this should only be done by persons who are accustomed to handling such weights.
The integrated amplifier 082 is shipped inside a plastic protective cover. Make sure that children do not play with it to avoid the danger of suffocation.
Unpacking |
To avoid damaging the housing, please do not use pointed or sharp tools to open the box. |
|
Please make sure that the content of the box is complete. If something is missing or you |
|
notice any damage while unpacking, do not hook up the unit. Instead, contact your |
|
authorized dealer. |
Content of box |
The box should contain the following: |
|
|
• 1 |
Integrated amplifier 082 |
|
• 1 |
AC power cord |
|
• 1 remote control 067 |
|
|
• 1 owner’s manual |
Packaging |
We recommend keeping the original packing in case the unit needs to be shipped in the |
|
future. |
Setting up |
Carefully remove the unit from its packaging and set it up in an appropriate location. To |
|
protect the 082 from overheating make sure that the location offers sufficient air circulation |
|
around the unit. Also, avoid excessive exposure to sun, dust and humidity. |
|
Ventilation ducts and openings in the housing serve to keep the unit cool. They must not be |
|
covered up with magazines, table cloth, curtains etc. |
|
If the 082 has to be operated in an extremely warm environment it may be necessary |
|
to supply additional ventilation. Avoid operating the unit in an excessively humid |
|
environment like bath rooms etc. |
1
FUNCTIONAL OVERVIEW
FRONT PANEL
(1) |
IR receiver |
(7) |
INPUT buttons |
(2) |
Standby LED shows standby mode |
(8) |
VOLUME knob |
(3) |
Display |
(9) |
POWER button for turning the unit on or off |
(4) |
TONE LED illuminates when tone control is activated |
(10) |
TONE button for activating/deactivating the |
(5) |
INPUT button for SURROUND input |
|
tone control or the tone control setup |
(6) |
MONITOR button for tape monitoring |
(11) |
SETUP button for configuring the 082 |
REAR PANEL
(12) |
SURROUND input balanced |
(21) |
Loudspeaker terminal right, positive |
(13) |
PREAMP output balanced |
(22) |
Loudspeaker terminal right, negative |
(14) |
PREAMP output unbalanced |
(23) |
AC mains switch |
(15) |
TAPE output unbalanced, |
(24) |
AC mains terminal |
|
for analog recording device |
(25) |
REMOTE output |
(16) |
TAPE input unbalanced |
(26) |
BURLINK interface RS-232 with check LEDs |
(17) |
AUX2 input unbalanced |
(27) |
REMOTE input |
(18) |
AUX1 input balanced |
(28) |
Headphones jack |
(19) |
TUNER input balanced |
(29) |
BURLINK interface USB with check LEDs |
(20) |
CD input balanced |
(30) |
Loudspeaker terminal left, negative |
|
|
(31) |
Loudspeaker terminal left, positive |
2