Burmester 061 Owner's Manual

0 (0)

OWNER´S MANUAL

061 cd PlaYer

classic line

Dear Audiophile,

Thank you for choosing this Burmester audio component. We sincerely appreciate your trust in us.

You have purchased a unit which excels in musical fidelity and combines uncompromising manufacturing quality with technical innovation and the highest degree of operating flexibility.

We recommend reading this user manual at least once in its entirety before initial operation. This will enable you to make full use of all capabilities of this outstanding audiophile instrument.

Should you have any further questions, please contact your dealer or us directly.

You decide if we meet the demands of producing high-end components. We offer an additional service which also demonstrates high-end quality.

Talk to us about your special requests, even if they seem out of the ordinary. We happily accept technically reasonable challenges.

Enjoy your enhanced listening pleasure.

Your Burmester Team

C O N T E N T S

UNPACKING AND SETTING UP	1
FUNCTIONAL OVERWIEW OF FRONT AND REAR PANEL	2
CONNECTIONS	3-4
OPERATING CONTROLS AND FUNCTION INDICATORS	5-6
SYSTEM-SETUP	7-8
REMOTE CONTROL	9-10
PROGRAMMING A FAVORITE TRACK SELECTION OF A CD	11
BURLINK (optional)	12
GENERAL INSTRUCTIONS	13-14
TECHNICAL SPECIFICATIONS	15
SECURITY NOTICE	15

UNPACKING AND SETTING UP

CAUTION: The CD player 061 is shipped inside a plastic protective cover. Make sure that children do not play with it to avoid the danger of suffocation.

Unpacking	To avoid damaging the housing, please do not use pointed or sharp tools to open the box.
	Please make sure that the content of the box is complete. If something is missing or you
	notice any damage while unpacking, do not hook up the unit. Instead, contact your
	authorized dealer.

Content of box	The box should contain the following:
	• 1	CD player 061
	• 1 CD clamp
	• 1	AC power cord
	• 1	Remote control
	• 1 owner’s manual

Packaging	We recommend keeping the original packing in case the unit needs to be shipped in the
	future.

Setting up	Carefully remove the unit from its packaging and set it up in an appropriate location. To
	protect the 061 from overheating make sure that the location offers sufficient air circulation
	around the unit. Also, avoid excessive exposure to sun, dust and humidity.
	Ventilation ducts and openings in the housing serve to keep the unit cool. They must not be
	covered up with magazines, table cloth, curtains etc.
	If the 061 has to be operated in an extremly warm environment it may be necessary to
	supply additional ventilation. Avoid operating the unit in an excessively humid
	environment like bath rooms etc.

FUNCTIONAL OVERVIEW

FRONT PANEL

(1)	INPUT LEDs indicates the selected input	(10)	IR receiver for remote control
(2)	SYNC LED indicates a correct data stream input	(11)	AUDIO LED shows upsampling of 192kHz
(3)	Sliding cover	(12)	STOP button
(4)	TRACK display indicates the current track	(13)	PLAY/PAUSE button
(5)	TIME display shows time elapsed or remaining	(14)	DISPLAYbutton selects display brightness
(6)	INPUT button for selecting the digital input	(15)	POWER switch to switch the CD player
(7)	SKIP \|<< button for selecting the previous tracks		on and off
(8)	SKIP >>\| button for selecting the next tracks	(16)	POWER LED illuminates when the unit is on

(9)PROGRAM LED illuminates when a music program has been selected and saved

REAR PANEL

(17)	BURLINK interface RS-232 with check LEDs (opt.)	(26)	Digital audio input TORX
(18)	BURLINK interface USB with check LEDs (opt.)		for optical cables
(19)	MMI slot for new inputs or outputs	(27)	Digital audio input RCA2 (75Ω)
(20)	AC mains switch	(28)	Digital audio input RCA1 (75Ω)
(21)	AC mains terminal	(29)	Analog audio output right channel (bal.)
(22)	REMOTE output jack	(30)	Analog audio output (unbal.)
(23)	REMOTE input jack	(31)	Analog audio output (unbal.)
(24)	Digital audio output TOTX for optical cables		for analog recording unit
(25)	Digital audio output RCA (75Ω)	(32)	Analog audio output left channel (bal.)

+ 14 hidden pages