ITE M#
PROJECT
Tea Concentrate Dispenser
Features
Tea Concentrate Dispenser
• Venturi valve creates siphon pulling product through to mixing valve.
• Rear shut-off valve for cleaning dispenser.
• Accepts 2, 1/2 gallon (1.9 litre) jugs, or 1, 1 gallon ( 3.8 litre) jug in top of container
or bag-in-box.
• Side off-set handles for side-by-side placement.
• Built-in pressure regulator provides consistent product to water ratio.
• Mixes a range of 5:1 to 15:1 concentrate to water ratio.
• Solid plastic lid.
Model TCD-1
Dimensions: 22.9” H x 12.8” W x 18.1” D
(58.2cm H x 32.5cm W x 46cm D)
Bottom View Top View
DATE
Model TCD-2
Dimensions: 22.9”H x 12.8”W x 18.1” D
(58.2cm H x 32.5cm W x 46cm D)
For current specification sheets and other information, go to www.bunn.com.
Related Products
TDO Lid Retainer
Product No. : 35136.0001
Dimensions: 5.25”H x 11”W x 10.2”D
13.3cm H x 27.9cm W x 10.2cm D
Model Agency Listing
TCD-1
TCD-2
Drip Tray
Product No. : 38029.1000
Dimensions: 1”H x 10.7”W x 7.8”D
(2.5cm H x 27.2cm W x 19.8cm D)
E9003.7007B
Patents Apply
10/06
B8
Dimensions & Specifications
Model Product # Cubic Measure Shipping Weight
TCD-1 37750.0000 4.25 ft
(.12 m
TCD-2 37750.0002 4.25 ft
(.12 m
Electrical: No electrical
Plumbing: 20-90 psi (138-621 kPa). Model supplied with a 1⁄4” male flare fitting. Shut-off valve.
3
3
) (7.76 kg)
3
3
) (8.9 kg)
17.1 lbs.
19.6 lbs.
CANADA
TCD-1
TCD-2
Bunn-O-Matic Corporation of Canada - 280 Industrial Pkwy. S. Aurora, Ontario L4G 3T9 • 905-841-2866 • Fax 905-841-2775 • www.bunn.com
BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in inches. Bunn Corporation owns all copyrights relating to materials in this publication. Please contact Bunn Corporation to request permission to reproduce any portion of this publication.