Bunn G9-2T DBC Parts Manual

RELEASED FOR PRODUCTION
G9-2T DBC
for use
with Smart Funnel
®
URY
CAUTION
D N A
HAZARD.
PERSONAL INJ
RS
E
CTS
G
JE
IN
B
R E
O
P F
P
N
E
P
E
IG
NING
K
E
HO
R
F
PE
O
FO
UT O
TE
O
U H
C
OR
ILLUSTRATED PARTS CATALOG
Designs, materials, weights, specifications, and dimensions for equipment or replacement parts
are subject to change without notice.
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
33737.0002C 11/14 ©2012 Bunn-O-Matic Corporation
DIR Num: 33737.0002 20, January 2015
RELEASED FOR PRODUCTION
BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY
Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:
1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCR/MCP/MCA single cup brewers, ther­mal servers and ThermoFresh® servers (mechanical and digital) 1 year parts and 1 year labor.
2) All other equipment - 2 years parts and 1 year labor plus added warranties as specified below: a) Electronic circuit and/or control boards - parts and labor for 3 years. b) Compressors on refrigeration equipment - 5 years parts and 1 year labor. c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and labor for 4 years or 40,000 pounds of coffee, whichever comes first.
These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality, damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EX­PRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make
modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive op­tion while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.
In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.
392, A Partner You Can Count On, Air Infusion, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, Brew­WISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, TRIFECTA (sylized logo), Velocity Brew, Air Brew, Beverage Bar Creator, Beverage Profit Calculator, Brew better, not bitter., Build-A-Drink, BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer Control, Element, Milk Texturing Fusion, Nothing Brews Like a BUNN, Picture Prompted Cleaning, Pouring Profits, Signature Series, Sure Tamp, Tea At Its Best, The Horizontal Red Line, Ultra are either trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta® brewer housing configura­tion is a trademark of Bunn-O-Matic Corporation.
2
33737.2 031314
DIR Num: 33737.0002 20, January 2015
RELEASED FOR PRODUCTION
TABLE OF CONTENTS
Title Page No.
Electrical Controls ............................................................................................................................................ 16
Hopper, Lid and Slide Plate Assy........................................................................................................................8
Housing, Base and Panels .................................................................................................................................. 4
Motor, Burr Housing and Mounting Plate
Numerical Index
............................................................................................................................................... 20
.........................................................................................................12
3
DIR Num: 33737.0002 20, January 2015
33737.2 112014
RELEASED FOR PRODUCTION
26 1 25
2
HOUSING, BASE AND PANELS
19 16 17
G9-2T DBC
11 12
Early Models
18 14 15
8 25
3
13
4 5
k,
oc
electric sh
over.
of
ly.
nside.
n c
or ope
the risk
ve
ervicing.
personnel on
re s
e
To reduce
rvic
r-serviceable parts i
e
do not remo No us
orized se
ct power befo
Auth
conne
Dis
CAUTION
.
ONAL INJURY
RD
D N
A
AZA
ERS
S
S
H
P
R E
CT
G
JE
IN
B
R
F
O
P
PE
G.
N
E
P
E
O
IG
NIN
K
E
E
F H
P
OR
O
O
F
T
E
U
T
O
U
CH
R
6
10
O
12
9
7
23 22 27 28 20 21
23 22 24 20 21
Early Models
4
DIR Num: 33737.0002 20, January 2015
P2362
33737.2 112912
RELEASED FOR PRODUCTION
HOUSING, BASE AND PANELS
ITEM PART NO. QTY. DESCRIPTION
1 37966.1000 1 Rear Panel W/Decal SST (Includes items 2 & 25)
37966.1001 1 Rear Panel W/Decal BLK (Includes items 2 & 25)
01315.0000 8 Screw, Truss Head SST #8-32 x .38"
02322.0002 8 Screw, Truss Head BLK #8-32 x .38"
2 20545.0000 1 Decal, Warning Electrical
3 24237.0000 1 Decal, Notice - Interface Voltage
4 38170.0002 1 Housing Assy W/Decals, SST (Includes items 12, 13, 14, 17 & 18)
38170.1003 1 Housing Assy W/Decals, BLK (Includes items 12, 13, 14, 17 & 18)
5 05921.0000 2 Plug, Hole .25" Dia. (Early Models)
6 05752.0000 1 Base SST
05752.0001 1 Base BLK
02311.0000 6 Screw, Hex Crimptite #10-32 x .50"
7 05816.0000 1 Pad, Base
8 33732.1000 1 Panel Assy W/Decals, SST (Includes hardware below and items 9, 10 & 25)
33732.1001 1 Panel Assy W/Decals, BLK (Includes hardware below and items 9, 10 & 25)
01380.0000 2 Screw, Truss Head SST #6-32 x .50"
01382.0002 2 Screw, Truss Head BLK #6-32 x .50"
01518.0000 2 Washer, Screw Retaining #6
9 33734.0000 1 Schematic 120V & 230V
10 05876.0000 1 Decal, Caution
11 33733.1000 1 Cover Assy W/Decal SST (Includes item 12)
33733.1001 1 Cover Assy W/Decal BLK (Includes item 12)
01380.0000 2 Screw, Truss Head #6-32 x .50"
12 33735.0000 1 Decal, Ground Fresh (Early Models)
33735.0002 1 Decal, Ground Fresh (Late Models)
13 05838.1000 1 Cover w/Decal, SST (Includes item 12)
05838.1001 1 Cover w/Decal, BLK (Includes item 12)
01380.0000 2 Screw, Truss Head SST #6-32 x .50"
01382.0002 2 Screw, Truss Head BLK #6-32 x .50"
01518.0000 2 Washer, Screw Retaining #6
14 - - - - - - - - 1 Edging 19.15" (order item 31)
15 - - - - - - - - 1 Membrane Switch (See ELECTRICAL CONTROLS)
16 05884.0000 1 Decal, Motor Reset
17 02999.0000 1 Plug, Hole SST 1.19" Dia.
25126.0000 1 Plug, Hole BLK 1.19" Dia.
18 05814.0001 3 Window Assy (Includes adhesive)
19 00917.0000 8 Clip, J-Type #8-32
Early Models
Late Models
20 - - - - - - - - 1 Funnel Rail, Left (Early Models, Non-Adjustable)(Order Adjustable Rails & item 27)
32568.0001 1 Funnel Rail, Left (Late Models, Adjustable)
21 - - - - - - - - 1 Funnel Rail, Right (Early Models, Non-Adjustable)(Order Adjustable Rails & item 27)
32569.0001 1 Funnel Rail, Right (Late Models, Adjustable)
(Continued)
* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.
5
33737.2 112014
DIR Num: 33737.0002 20, January 2015
RELEASED FOR PRODUCTION
26 1 25
2
HOUSING, BASE AND PANELS
(Continued)
19 16 17
G9-2T DBC
11 12
Early Models
18 14 15
8 25
3
13
4 5
k,
oc
electric sh
over.
of
ly.
nside.
n c
or ope
the risk
ve
ervicing.
personnel on
re s
e
To reduce
rvic r-serviceable parts i e
do not remo No us
orized se
ct power befo
Auth
conne
Dis
CAUTION
.
ONAL INJURY
RD
D N
A
AZA
ERS
S
S
H
P
R E
CT
G
JE
IN
B
R
F
O
P
PE
G.
N
E
P
E
O
IG
NIN
K
E
E
F H
P
OR
O
O
F
T
E
U
T
O
U
CH R
6
10
O
12
9
7
23 22 27 28 20 21
23 22 24 20 21
Early Models
6
DIR Num: 33737.0002 20, January 2015
P2362
33737.2 112912
Loading...
+ 14 hidden pages