Bunn G9-2TA HD PARTS LIST

®
BUNN
G9-2 HD, G9-2A HD
G9-2T HD, G9-2TA HD
CAUTION
PERSONAL INJURY
CAUTION
PERSONAL INJURY
HAZARD.
KEEP FINGERS AND FOREIGN OBJECTS
OUT OF HOPPER 
OR CHUTE OPENING.
HAZARD.
KEEP FINGERS AND FOREIGN OBJECTS
OUT OF HOPPER 
OR CHUTE OPENING.
ILLUSTRATED PARTS CATALOG
Designs, materials, weights, specifications, and dimensions for equipment or replacement parts
are subject to change without notice.
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
10832.0000 11/03 ©1994 Bunn-O-Matic Corporation
www.bunnomatic.com
BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY
Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:
1) All equipment other than as specified below: 2 years parts and 1 year labor.
2) Electronic circuit and/or control boards: parts and labor for 3 years.
3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.
4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first.
These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN
are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.
If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.
In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.
2
10832 061302
TABLE OF CONTENTS
Electrical Controls............................................................................................................................................ 14
Hopper, Lid and Slide Plate Assy ....................................................................................................................... 8
Housing, Base and Panels ................................................................................................................................. 4
Motor, Burr Housing and Mounting Plate ........................................................................................................ 12
Numerical Index............................................................................................................................................... 18
3
10832 091200
BUNN
®
19
HOUSING, BASE AND PANELS
2025
10 9 8
G9-2 HD
G9-2T HD
G9-2 HD-S
N
O
I
T
U
A
C
D.
NAL INJURY
AND
S
HAZAR
PERSO
TS
R
C
GE
JE
R
B
IN
E
F
G.
N O
PP
EP
O
E
NIN
K
H
REIG
F
PE
O
O
O
F
E
T UT O CHU
R O
24
23
22
21
G9-2T HD MODELS
17
1
2
3
4
16
18
15
14
5
13
N
O
I
T
U
A
JURY
C
L IN
.
RD
D
S AN
HAZA
PERSONA
TS
R
C E G
JE
R
IN
B
.
F
O
PE
G
P
P
IN
GN
O
I
EE
K
EN
H
RE
F
P
O
O
O
F
E T
UT
U
O
H
C R O
6
12
11
10
7
9
8
P565.43
4
10832 091200
HOUSING, BASE AND PANELS
ITEM PART NO. QTY. DESCRIPTION
1 05844.1000 1 Rear Panel W/Decal (Includes item 2)
01315.0000 8 Screw, Truss Head 8 - 32 x .38"
01311.0003 8 Screw, Truss Head Blk 8 - 32 x .38"
2 20545.0000 1 Decal, Warning Electrical
3 24237.0000 1 Decal, Notice - Interface Voltage
4 25407.0000 1 Housing Assy W/Decals (G9-2 HD 120V)
25407.0004 1 Housing Assy W/Decals (BLK) (G9-2 HD 120V)
25407.0001 1 Housing Assy W/Decals (G9-2 HD 240V)
25407.0003 1 Housing Assy W/Decals (G9-2 HD 230V)
25408.0000 1 Housing Assy W/Decals SST (G9-2T HD 120V)
25408.0001 1 Housing Assy W/Decals (G9-2T HD 240V)
25408.0002 1 Housing Assy W/Decals (G9-2T HD 230V)
25408.0003 1 Housing Assy W/Decals Blk (G9-2T HD 120V)
5 05921.0000 1 Plug, Hole .25" Dia.
6 05809.0000 1 Base (G9-2 HD)
05809.0002 1 Base (G9-2 HD) (BLK)
05809.0001 1 Base (G9-2 HD-S)
05752.0000 1 Base (G9-2T HD)
02311.0000 6 Screw, Hex Crimptite 10 - 32 x .50"
Includes items 3, 16 & 18 Also order item 13
7 05816.0000 1 Pad, Base
8 20798.1003 1 Panel Assy W/Decals (120V) (G9-2 HD)
20798.1014 1 Panel Assy W/Decals (BLK) (120V) (G9-2 HD)
20798.1004 1 Panel Assy W/Decals SST (120V) (G9-2T HD W/0 or 2 batch sel.)
20798.1012 1 Panel Assy W/Decals Blk (120V) (G9-2T HD W/0 or 2 batch sel.)
20798.1011 1 Panel Assy W/Decals (120V) (G9-2T HD 3 batch sel.)
20798.1005 1 Panel Assy W/Decals (230V, 240V) (G9-2 HD)
20798.1006 1 Panel Assy W/Decals (240V) (G9-2T HD)
20798.1009 1 Panel Assy W/Decals (120V) (G9-2 HD-S)
01380.0000 2 Screw, Truss Head 6 - 32 x .50"
02323.0000 2 Screw, Truss Head Blk 6 - 32 x .50"
01518.0000 2 Washer, Screw Retaining #6
9 10756.0000 1 Schematic/Time Chart 120V (W/0 or 2 batch sel.)
10756.0002 1 Schematic/Time Chart 120V (3 batch sel.)
10756.0001 1 Schematic/Time Chart 120V (G9-2 HD-S)
10768.0000 1 Schematic/Time Chart 240V
10 05876.0000 1 Decal, Caution
11 21620.1004 1 Cover Assy W/Decal SST (Includes screws and washers below and item 12)
21620.1011 1 Cover Assy W/Decal Blk (Includes screws and washers below and item 12)
01380.0000 2 Screw, Truss Head 6 - 32 x .50"
02323.0000 2 Screw, Truss Head Blk 6 - 32 x .50"
01518.0000 2 Washer, Screw Retaining #6
Includes screws and washers below and items 9 & 10
12 24240.0000 1 Decal, Precision Grinder
13 24239.0000 1 Decal, Control Panel (No batch sel.)
24239.0001 1 Decal, Control Panel (2 batch sel.) (Shown)
24239.0005 1 Decal, Control Panel (3 batch sel.)
14 05827.0000 1 Plate, Switch Shield
02308.0000 2 Screw, Pan Head 8 - 32 x .38"
00912.0000 2 Clip, J-Type 8 - 32 (Late Models only) (Continued)
5
10832 110901
BUNN
®
19
HOUSING, BASE AND PANELS
(Continued)
2025
10 9 8
G9-2 HD
G9-2T HD
G9-2 HD-S
N
O
I
T
U
A
C
NAL INJURY
ND
S A
HAZARD.
PERSO
TS
R
C
GE
JE
R
B
IN
.
F
PE
G
P
N O
OP
EE
K
ENIN
H
REIG
F
O
O
OP
F
E
T UT O CHU
R O
24
23
22
21
G9-2T HD MODELS
17
1
2
3
4
16
18
15
14
5
13
N
O
I
T
U
A
C
L INJURY
.
ND
A
HAZARD
PERSONA
TS
RS
C
E
G
JE
R
IN
B
.
F
O
PE
G
P
P
IN
GN
O
EE
EI
K
EN
H
R
F
O
O
F
E OP T
UT
U
O
H
C R O
6
12
11
10
7
9
8
P565.43
6
10832 091200
HOUSING, BASE AND PANELS
ITEM PART NO. QTY. DESCRIPTION
15 05839.0000 2 Funnel Rail
02308.0000 4 Screw, Pan Head 8 - 32 x .38"
16 05884.0000 1 Decal, Motor Reset
17 02999.0000 1 Plug, Hole 1.19" Dia.
18 05814.0001 3 Window Assy (Includes adhesive)
19 00917.0000 8 Clip, J-Type 8 - 32
20 05771.0000 1 Funnel Rail, Left
02308.0000 2 Screw, Pan Head 8 - 32 x .38"
21 05770.0000 1 Funnel Rail, Right
02308.0000 2 Screw, Pan Head 8 - 32 x .38"
22 05781.0000 2 Spring
23 05743.0000 2 Screw, Stop 8 - 32 x .75"
24 05742.0000 1 Bracket, Right Spring
25 05741.0000 1 Bracket, Left Spring
G9-2T HD Models only
7
10832 091200
BUNN
®
HOPPER, LID & SLIDE PLATE ASSEMBLY
G9-2 HD
G9-2T HD
G9-2 HD-S
1 4 3
31
32
33
OPTIONAL TAMPER RESISTANT LID
1 4 3
34
2
3
4
1
5
6
7
8
9
10
11
12
33
OPTIONAL LOCKING LID
28
25 24
14
26 27
29
30
8
15
21
21
23
13
16
18 19
20
22
P567
10832 091200
HOPPER, LID & SLIDE PLATE ASSEMBLY
ITEM PART NO. QTY. DESCRIPTION
- 24243.1000 1 Hopper Assy, 120V
- 24243.1001 1 Hopper Assy, 240V
1 24399.0000 1 Lid Assy, Hopper SST
24399.0004 1 Lid Assy, Hopper Blk
24399.0001 1 Lid Assy, Hopper Tamper Resistant
24399.0002 1 Lid Assy, Hopper Locking
02328.0000 4 Screw, Pan Head 6 - 32 x .38"
2 26033.0001 2 Bearing, Snap-in
3 00725.0000 2 Knob
4 05876.0000 2 Decal, Caution
5 21438.0001 2 Washer, Shoulder .144" I.D.
6 02328.0000 2 Screw, Pan Head #6-32 x .375"
01382.0007 2 Screw, Truss Head Blk #6-32 x .375"
7 29358.0000 1 Channel, Hopper lid mounting
8 05960.0000 1 Hopper Assy W/Inserts
02367.0000 2 Screw, Truss Head 6 - 32 x .62"
01380.0000 2 Screw, Truss Head 6 - 32 x .50"
01388.0002 2 Screw, Truss Head Blk 6 - 32 x .75"
02323.0000 2 Screw, Truss Head Blk 6 - 32 x .50"
00991.0002 4 Nut, Hex 6 - 32
Includes items 1 thru 29
Includes items 2 thru 7
SST Grinders
Black Grinders
9 23917.0000 2 Limit Thermostat
01311.0000 8 Screw, Truss Head 8 - 32 x .25"
10 05939.0003 2 Solenoid Assy (120V)
05939.0004 2 Solenoid Assy (240V)
02308.0000 8 Screw, Pan Head 8 - 32 x .38"
01501.0000 8 Washer, Flat
11 23923.0000 2 Washer, Fiber .063" Thick
12 23918.0000 2 Spring
13 23922.0000 2 Washer, Retaining .035" Thick
14 05969.0000 2 Slide Plate/Linkage Assy (Includes items 15 thru 23)
15 - - - - - - - - 2 Plunger (Not available seperately order item 14)
16 02858.0000 2 Pin, Spring .125" x .50"
17 23919.0000 2 Snap Ring
18 01403.0000 8 E-Ring
19 05914.0002 2 Pin, Linkage .19" x .39"
20 05911.0001 2 Link, Slide Plate (Short)
21 05914.0001 2 Pin, Linkage .19" x .30"
(Continued)
9
10832 091200
BUNN
®
HOPPER, LID & SLIDE PLATE ASSEMBLY
(Continued)
G9-2 HD
G9-2T HD
G9-2 HD-S
1 4 3
31
32
33
OPTIONAL TAMPER RESISTANT LID
1 4 3
34
2
3
4
1
5
6
7
8
9
10
11
12
33
OPTIONAL LOCKING LID
10
29
30
28
15
21
21
23
25 24 26 27
13
14
16
18 19
20
22
P567
10832 091200
HOPPER, LID & SLIDE PLATE ASSEMBLY
ITEM PART NO. QTY. DESCRIPTION
22 05910.0000 2 Link, Slide Plate (Long)
23 05912.0000 2 Slide Plate
24 05959.0001 1 Mounting Panel Assy, Slide Plate (Includes items 25, 26 & 27)
01317.0000 6 Screw, Truss Head 8 - 32 x .50"
25 23920.0000 2 Pin, Pivot
26 01547.0000 4 Spacer .062" Thick
27 00991.0000 2 Nut, Elastic Lock 8 - 32
28 23921.0000 2 Block, Stop
02336.0000 2 Screw, Truss Head 4 - 32 x .38"
29 05916.0000 1 Collector
30 21457.0000 1 Gasket, Burr Housing/Collector
31 01402.0000 2 Thumb Screw
32 01403.0000 2 E-Ring
33 05970.0001 1 Bracket, Lid Locking
34 11628.0000 2 Lid Lock Assy (Includes Keys) (New Keys should be made locally)
11
10832 120301
BUNN
®
G9-2 HD
MOTOR, BURR HOUSING AND MOUNTING PLATE
G9-2T HD
G9-2 HD-S
1
2
2
3
4
FRANKLIN MOTOR
19
20
21
22
23
19
16
17
18
5
6
7
8
9
Y
COARSE FINE
L
COARSE FINE
B
R
S
A
.
O
C
M
R
E
E
S
V
S
O
A
U
C
E
B
S
R
I
H
E
T
R
O
G
T
F
E
N
H
I
E
E
O
V
M
B
C
O
R
P
I
R
T
M
O
T
Y
E
E
U
O
N
R
H
B
G
O
E
M
P
R
H
P
O
A
E
F
L
R
E
B
H
Y
C
C
L
D
E
N
I
A
R
N
G
10
11
12
13
15
24
12
13
15
14
EARLY MODELS
P568.55
10832 052103
MOTOR, BURR HOUSING AND MOUNTING PLATE
ITEM PART NO. QTY. DESCRIPTION
1 05965.0000 1 Snubber Assy, Timer (Early models)
2- - - - - - - - 1 Motor Assy,115V (Franklin) (Early models. Order late model Motor)
11090.0004 1 Motor Assy,115V (Marathon) (Late models)
11090.0005 1 Motor Assy, 230V
3 11191.0001 1 Shaft Extension
4 11180.0000 1 Burr Housing
02313.0000 4 Screw, Hex Head .38" - 16 x 1.0"
5 05861.1002 1 Burr Set (Includes 2 Burrs and Screws below)
02314.0000 4 Screw, Pan Head .25" - 20 x .50"
6 11192.0000 1 Spring
7 11185.0001 1 Burr Auger Rotor/Spring Assy (Includes item 6)
8 05852.0001 1 Shear Plate
9 00622.0000 1 Cup, Burr Rotor
10 05867.0000 1 Cap W/Decals, Burr Housing (Includes items 11 & 12)
05867.0002 1 Cap & Adjustng Screw W/Decals, Burr Housing (Includes items 11 thru14) (Also order item 15)
20631.0000 2 Screw, Slotted Hex Head .25" - 20 x .75"
11 05868.0000 1 Decal, Housing Cover
12 05880.0000 1 Decal, Grind Indicator
13 05864.0000 1 Adjusting Screw (Early models)
35184.0000 1 Adjusting Screw (Late models)
14 00989.0000 1 Nut, Locking
15 05796.0000 1 Decal, Adjusting Screw
16 05951.0000 1 Chute
02330.0000 4 Screw, Slotted Hex Head 10 - 24 x .50"
17 05995.0000 1 Dechaffer Plate
02327.0002 2 Screw, Pan Head 4 - 40 x .312"
18 05954.0000 1 Dechaffer Assy (Includes item 17)
02328.0002 1 Screw, Pan Head 6 - 32 x .188"
19 01539.0000 8 Washer, Flat
20 05881.0000 4 Bushing
21 00718.0000 1 Bushing, 1.125" Dia. Hole
22 05957.0000 1 Plate, Motor Mounting
02311.0000 6 Screw, Slotted Hex Head 10 - 32 x .50"
01347.0000 2 Screw, Truss Head SST 6 - 32 x .38" (SST Grinders)
01382.0007 2 Screw, Truss Head Blk Locking 6 - 32 x .38" (Black Grinders)
Also order item 15
23 05882.0000 4 Washer, 1.50" Dia.
24 02312.0000 4 Screw, Hex Washer Head .312" - 18 X 1.50"
00987.0000 4 Nut, Lock .312" - 18
13
10832 112503
BUNN
9
®
ELECTRICAL CONTROLS
1
G9-2 HD
G9-2T HD
G9-2 HD-S
First Type Dustcap
7
8
9
10
11
12
DUAL VOLTAGE MODELS
2
S MODELS ONLY
1
2
1
3
2
4
5
14
16
15
6
16
13
12
81
240 VOLT GRINDERS
14
230 VOLT GRINDERS
P569
10832 111903
ELECTRICAL CONTROLS
ITEM PART NO. QTY. DESCRIPTION
1 05958.1006 1 Timer/Bracket Assy (120V All except S Models)
05958.1008 1 Timer/Bracket Assy (230V, 240V)
25623.1000 1 Timer/Bracket Assy (120V) (S Models only)
32064.1000 1 Timer/Bracket Assy (Dual Voltage Models)
28062.0000 1 Thumbscrew (Dual Voltage Models)
01315.0000 2 Screw, Truss Head 8 - 32 x .375"
01516.0000 2 Washer, Screw Retaining
2 05942.0000 1 Decal, Timer (All except S Models)
25763.0000 1 Decal, Timer (S Models only)
34986.0000 1 Decal, Timer (Dual Voltage Models)
3 00603.0000 4 Clamp, cable .438" I.D. (2 less used on late grinders)
01315.0000 1 Screw, Truss Head 8 - 32 x .375" (SST Grinders)
01315.0003 1 Screw, Truss Head Brass 8 - 32 x .375" (Brass Grinders)
02322.0002 1 Screw, Truss Head Black 8 - 32 x .375" (Black Grinders)
00970.0000 3 Nut, Keps 8 - 32 (2 less used on late grinders)
4 06536.0000 1 Switch, 2 batch selection (SST Grinders with Multi Set Option only)
29107.0000 1 Switch, 3 batch selection (SST Grinders with Multi Set Option only)
5 05789.0000 1 Switch, Hopper Selection
Includes screws and washers below and item 2
6 05815.0000 1 Switch, Off/On/Start
7 05920.0000 1 Clamp, cable .25" I.D.
00973.0000 1 Nut, Keps 6 - 32
8 05850.0000 1 Relay (120V Grinders)
05892.0000 1 Relay (240V Grinders)
28034.0000 1 Relay (230V Grinders)
01347.0000 1 Screw, Truss Head 6 - 32 x .375"
9- - - - - - - - 1 Dustcap W/Chain (First type not available order second type cap)
27657.0000 1 Cap, Dust (Second type)
10 12274.0002 1 Socket Assy W/Leads, Interface
11 01326.0000 1 Screw, Ground Truss Head SST 10 - 32 x .25"
00971.0000 1 Nut, Keps 10 - 32
12 00707.0000 1 Bushing, Strain Relief (120V Grinders)
05746.0000 1 Bushing, Strain Relief (230V Grinders)
13 01908.0000 1 Power Connector
01362.0000 2 Screw, Oval Head 4 - 40 x .50"
01509.0000 2 Lockwasher, External Tooth #4
00937.0000 1 Nut, Hex 4 - 40
14 05749.0000 1 Plug, .625" Dia.
All except S Models
240 Volt Grinders only
15 21016.0013 1 Lead, Elect. Grn/Yel 4.0" (Ground)
01375.0000 1 Screw, Brass Pan Head 10 - 32 x .50"
01512.0000 1 Lockwasher, External Tooth #10
00909.0000 1 Nut, Brass 10 - 32
16 00824.0000 1 Decal, Ground
(Continued)
15
10832 111903
BUNN
9
®
ELECTRICAL CONTROLS
(Continued)
1
G9-2 HD
G9-2T HD
G9-2 HD-S
First Type Dustcap
7
8
9
10
11
12
DUAL VOLTAGE MODELS
2
S MODELS ONLY
1
2
1
3
2
4
5
14
16
15
6
16
13
12
81
240 VOLT GRINDERS
16
230 VOLT GRINDERS
P569
10832 111903
ELECTRICAL CONTROLS
ITEM PART NO. QTY. DESCRIPTION
Note: The following items are not illustrated
17 24241.1000 1 Wiring Harness, Main (120V Grinders)
24330.0000 1 Wiring Harness, Main (240V Grinders)
28126.0000 1 Wiring Harness, Main (230V Grinders)
18 24242.0000 1 Wiring Harness, Switch/Interface
19 29108.0000 1 Wiring Harness, (3 batch selector switch)
20 05188.0002 1 Cable, Interface
21 21005.0561 2 Lead, Electrical White/Black 10.0" (Hopper Solenoid to Main Harness)
22 01712.0000 1 Cord Assy, Power 120V
27728.0001 1 Cord Assy, Power 230V
23 00669.0000 1 Plug, Hole .625" Dia. (Models W/O Interface)
24 22749.0000 2 Pad, Cable Tie (Self adhesive) (Early models)
25 00617.0000 2 Tie, Cable (Early models)
17
10832 112503
NUMERICAL INDEX
PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO.
00603.0000 ....................... 15
00617.0000 ....................... 17
00622.0000 ....................... 13
00669.0000 ....................... 17
00707.0000 ....................... 15
00718.0000 ....................... 13
00725.0000 ......................... 9
00824.0000 ....................... 15
00909.0000 ....................... 15
00912.0000 ......................... 5
00917.0000 ......................... 7
00937.0000 ....................... 15
00970.0000 ....................... 15
00971.0000 ....................... 15
00973.0000 ....................... 15
00987.0000 ....................... 13
00989.0000 ....................... 13
00991.0000 ....................... 11
00991.0002 ......................... 9
01311.0000 ......................... 9
01311.0003 ......................... 5
01315.0000 .................... 5,15
01315.0003 ....................... 15
01317.0000 ....................... 11
01326.0000 ....................... 15
01347.0000 .................. 13,15
01362.0000 ....................... 15
01375.0000 ....................... 15
01380.0000 ...................... 5,9
01382.0007 .................... 9,13
01388.0002 ......................... 9
01402.0000 ....................... 11
01403.0000 .................... 9,11
01501.0000 ......................... 9
01509.0000 ....................... 15
01512.0000 ....................... 15
01516.0000 ....................... 15
01518.0000 ......................... 5
01539.0000 ....................... 13
01547.0000 ....................... 11
01712.0000 ....................... 17
01908.0000 ....................... 15
02308.0000 ................... 5,7,9
02311.0000 .................... 5,13
02312.0000 ....................... 13
02313.0000 ....................... 13
02314.0000 ....................... 13
02322.0002 ....................... 15
02323.0000 ...................... 5,9
02327.0002 ....................... 13
02328.0000 ......................... 9
02328.0002 ....................... 13
02330.0000 ....................... 13
02336.0000 ....................... 11
02367.0000 ......................... 9
02858.0000 ......................... 9
02999.0000 ......................... 7
05188.0002 ....................... 17
05741.0000 ......................... 7
05742.0000 ......................... 7
05743.0000 ......................... 7
05746.0000 ....................... 15
05749.0000 ....................... 15
05752.0000 ......................... 5
05770.0000 ......................... 7
05771.0000 ......................... 7
05781.0000 ......................... 7
05789.0000 ....................... 15
05796.0000 ....................... 13
05809.0000 ......................... 5
05809.0001 ......................... 5
05809.0002 ......................... 5
05814.0001 ......................... 7
05815.0000 ....................... 15
05816.0000 ......................... 5
05827.0000 ......................... 5
05839.0000 ......................... 7
05844.1000 ......................... 5
05850.0000 ....................... 15
05852.0001 ....................... 13
05861.1002 ....................... 13
05864.0000 ....................... 13
05867.0000 ....................... 13
05867.0002 ....................... 13
05868.0000 ....................... 13
05876.0000 ...................... 5,9
05880.0000 ....................... 13
05881.0000 ....................... 13
05882.0000 ....................... 13
05884.0000 ......................... 7
05892.0000 ....................... 15
05910.0000 ....................... 11
05911.0001 ......................... 9
05912.0000 ....................... 11
05914.0001 ......................... 9
05914.0002 ......................... 9
05916.0000 ....................... 11
05920.0000 ....................... 15
05921.0000 ......................... 5
05939.0003 ......................... 9
05939.0004 ......................... 9
05942.0000 ....................... 15
05951.0000 ....................... 13
05954.0000 ....................... 13
05957.0000 ....................... 13
05958.1006 ....................... 15
05958.1008 ....................... 15
05959.0001 ....................... 11
05960.0000 ......................... 9
05965.0000 ....................... 13
05969.0000 ......................... 9
05970.0001 ....................... 11
05995.0000 ....................... 13
06536.0000 ....................... 15
10756.0000 ......................... 5
10756.0001 ......................... 5
10756.0002 ......................... 5
10768.0000 ......................... 5
11090.0004 ....................... 13
11090.0005 ....................... 13
11180.0000 ....................... 13
11185.0001 ....................... 13
11191.0001 ....................... 13
11192.0000 ....................... 13
11628.0000 ....................... 11
12274.0002 ....................... 15
20545.0000 ......................... 5
20631.0000 ....................... 13
20798.1003 ......................... 5
20798.1004 ......................... 5
20798.1005 ......................... 5
20798.1006 ......................... 5
20798.1009 ......................... 5
20798.1011 ......................... 5
20798.1012 ......................... 5
20798.1014 ......................... 5
21005.0561 ....................... 17
21016.0013 ....................... 15
21438.0001 ......................... 9
21457.0000 ....................... 11
21620.1004 ......................... 5
21620.1011 ......................... 5
22749.0000 ....................... 17
23917.0000 ......................... 9
23918.0000 ......................... 9
23919.0000 ......................... 9
23920.0000 ....................... 11
23921.0000 ....................... 11
23922.0000 ......................... 9
23923.0000 ......................... 9
24237.0000 ......................... 5
24239.0000 ......................... 5
24239.0001 ......................... 5
24239.0005 ......................... 5
24240.0000 ......................... 5
24241.1000 ....................... 17
24242.0000 ....................... 17
24243.1000 ......................... 9
24243.1001 ......................... 9
24330.0000 ....................... 17
24399.0000 ......................... 9
24399.0001 ......................... 9
24399.0004 ......................... 9
25407.0000 ......................... 5
25407.0001 ......................... 5
25407.0003 ......................... 5
25407.0004 ......................... 5
25408.0000 ......................... 5
25408.0001 ......................... 5
25408.0002 ......................... 5
25408.0003 ......................... 5
25623.1000 ....................... 15
25763.0000 ....................... 15
26033.0001 ......................... 9
27657.0000 ....................... 15
27728.0001 ....................... 17
28034.0000 ....................... 15
28062.0000 ....................... 15
28126.0000 ....................... 17
29107.0000 ....................... 15
29108.0000 ....................... 17
29358.0000 ......................... 9
32064.1000 ....................... 15
34986.0000 ....................... 15
35184.0000 ....................... 13
18
10832 111903
Loading...