Bunn DUAL SH DBC 1.0 Parts Manual
RELEASED FOR PRODUCTION
®
DUAL
.5 & 1.0 Gallon
ENABLE
ON / OFF
BREW
ENABLE
ON / OFF
BREW
SH DBC
®
ILLUSTRATED PARTS CATALOG
Designs, materials, weights, specifications, and dimensions for equipment or replacement parts
are subject to change without notice.
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
29878.0004E 10/14 ©2013 Bunn-O-Matic Corporation
DIR Num: 29878.0004 06, November 2014
RELEASED FOR PRODUCTION
BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY
Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:
1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCR/MCP/MCA single cup brewers, thermal servers and ThermoFresh® servers (mechanical and digital) 1 year parts and 1 year labor.
2) All other equipment - 2 years parts and 1 year labor plus added warranties as specified below:
a) Electronic circuit and/or control boards - parts and labor for 3 years.
b) Compressors on refrigeration equipment - 5 years parts and 1 year labor.
c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and
labor for 4 years or 40,000 pounds of coffee, whichever comes first.
These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be
commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the
applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured
by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation,
improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality,
damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but
not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN
prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box
3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized
BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make
modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such
individuals, whether oral or written, do not constitute warranties and should not be relied upon.
If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the
applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair
is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for
the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS
EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION
AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.
In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of
use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities
or services, or any other special, incidental or consequential damages.
392, A Partner You Can Count On, Air Infusion, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with
the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design,
Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet
Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment
Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com,
Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in
Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, TRIFECTA (sylized logo), Velocity Brew, Air Brew, Beverage
Bar Creator, Beverage Profit Calculator, Brew better, not bitter., Build-A-Drink, BUNNSource, Coffee At Its Best, Cyclonic
Heating System, Daypart, Digital Brewer Control, Element, Milk Texturing Fusion, Nothing Brews Like a BUNN, Picture
Prompted Cleaning, Pouring Profits, Signature Series, Sure Tamp, Tea At Its Best, The Horizontal Red Line, Ultra are either
trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta® brewer housing configuration is a trademark of Bunn-O-Matic Corporation.
2
29878.4 031314
DIR Num: 29878.0004 06, November 2014
RELEASED FOR PRODUCTION
TABLE OF CONTENTS
Base - Trunk - Hood - Covers & Panels ...................................................................................................................................... 4
Dispense Valve and Sprayhead ................................................................................................................................................. 14
Electrical Controls .................................................................................................................................................................... 18
Faucet ....................................................................................................................................................................................... 16
Funnel....................................................................................................................................................................................... 22
Numerical Index ....................................................................................................................................................................... 24
Strainer, Solenoid & Lines ....................................................................................................................................................... 10
Tank and Mounting Brackets ...................................................................................................................................................... 8
Tank Heater & Overflow Protection Devices ............................................................................................................................... 6
Water By-Pass .......................................................................................................................................................................... 12
3
DIR Num: 29878.0004 06, November 2014
29878.4 012113
RELEASED FOR PRODUCTION
BUNN
®
1
2
3
4
BASE - TRUNK - HOOD - COVERS & PANELS
5
6
7
LE
NAB
E
/ OFF
ON
W
RE
B
LE
NAB
E
ON / OFF
REW
B
8
DUAL
10
11
12
13
14
15
16
9
Torque nuts to 35 in. lbs.
18
17
19
20
R
TE
CAN
ION
RD DE
SCA
CAUT
DI
:
!
D
IF
Y
KE
ED
C
H
A
C
Y
R
EMPT
T
ME
R
. C
A
RA
EN
L
RIC
F
T
ED D
. SC
WH
IL
EC
D
O
L
E
HIGH
E
. B
D
EAT
ON
D
. H
SE
XPOSE
S
T
. U
E
N
R
ME
. O
N
E
O
S
INJURY
ATI
EL
R
S
O
NT
P
K
R
E
S
O
I
C
C
I
T
LY R
CONT
-MA
T
L
-O
N
E
N
HO
BU
5
8
UNN
9
1
F
ARE
TO COMP
E
LUR
FAI
8
5
6
:
N
P
21
2
22
23
24
23
4
DIR Num: 29878.0004 06, November 2014
P4315
29878.4 050114
RELEASED FOR PRODUCTION
BASE - TRUNK - HOOD - COVERS & PANELS
ITEM PART NO. QTY. DESCRIPTION
1 25376.0002 1 Cover Assy, Top BLK (Includes item 2 & 3)
02336.0002 4 Screw, Truss Head BLK #4 - 40 x .38"
00916.0000 4 Clip, J-Type #4-40
2 33871.0000 2 Decal, Warning “No Serviceable Parts”
3 25151.0000 2 Shield, Insulator
4 26949.0001 2 Bracket, Tank Supporting
5 32649.0000 2 Plate
00970.0000 4 Nut, Keps #8-32
6 35388.0006* 1 Hood
02308.0000 16 Screw, Pn-Hd #8 - 32 x .375"
7 29974.0007 1 Switch, Membrane
8 05749.0004 1 Plug, Hole .50" Dia. (Models with Lower Faucet)
9 35160.1000 1 Trunk W/Decals (Includes items 10, & 11)
10 00986.0000 1 Decal, Warning - Electrical
11 00656.0001 1 Decal, Comply to Plumbing Code
12 00619.0005 - Plug, Hole 1.06" Dia (Use as required)
13 35334.0000 1 Base Housing
02308.0000 8 Screw, Pan Head #8 - 32 x .375"
14 38936.0007 1 Cover, Bottom
02308.0000 15 Screw, Pan Head #8 - 32 x .375"
15 26528.0000 4 Leg, 4.0" SST Adjustable
16 03996.0000 4 Pad, Anti Skid
17 12249.0001 3 Guide Rail SST
00970.0000 6 Nut, Keps #8 - 32
Models without Funnel Locks
18 27760.0002 1 Cover, Server Platform
01382.0003 4 Screw, Truss Head #6 - 32 x .375"
19 35158.1000 1 Panel W/Decals, Trunk (Includes items 2, 20, & 21)
01382.0003 11 Screw, Truss Head #6 - 32 x .375"
20 29876.0015 1 Schematic, 120V
21 00658.0000 1 Decal, Caution - Decanter/Funnel
22 39803.0000 1 Decal, Main Switc h
23 21537.0001 2 Plate, Server Stop SST
01347.0000 4 Screw, Truss Head SST #6-32 x .38"
24 20201.5600 1 Decal, Warning - Hot Water
5
* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.
DIR Num: 29878.0004 06, November 2014
29878.4 112513
RELEASED FOR PRODUCTION
BUNN
Torque screws
to 7 in. lbs.
®
7
8
TANK HEATER & OVERFLOW PROTECTION DEVICES
3 4 5 6 1 7 8 9 22 10
2
2
DUAL
15
14
13
12
24 25
16 2 19
20
21
17
18
11
16
23
2
6
DIR Num: 29878.0004 06, November 2014
P2337
29878.4 012113
RELEASED FOR PRODUCTION
TANK HEATER & OVERFLOW PROTECTION DEVICES
ITEM PART NO. QTY. DESCRIPTION
1 23717.0003 2 Thermostat, Limit
00908.0000 4 Nut, Hex #8 - 32
2 02536.0000 3 Grommet .375" I.D.
3 20936.1000 1 Probe Kit (Includes items 4, 5 & 6)
4 01501.0000 1 Washer .164' I.D. x .375" O.D.
5 20203.0100 1 Lockwasher, Internal Tooth #8
6 00908.0000 1 Nut, Hex #8 - 32
7 20922.1000 2 Tank Heater, 3300W @ 240V (Includes item 8)
00908.0000 8 Nut, Hex #8 - 32
8 12398.0002 2 Gasket, Tank Heater
9 26622.0001 1 Tube Assy, Vent
10 27473.0000 1 Bracket, Overflow Cup Mounting
11 41266.0000 1 Film, Insulating
12 03803.0000 1 Switch Assy, Liquid Level, 120V (Includes items 13, 14 & 15)
00946.0000 1 Nut, Hex .125" FPT
13 03633.0000 2 Gasket, Float Switch (Only 1 used in this application)
14 - - - - - - - - 3 Washer, Adjusting (DO NOT USE IN THIS APPLICATION)
15 03807.0000 1 Clip, Spring
16 41259.1003 1 Kit, Overflow Cup (Aluminum) (Includes items 2,11, 17 &19)
00971.0000 2 Nut, Keps #10 - 32
17 04797.0000 1 Washer, Celcon .520” I.D. x 1.0” O.D.
18 00946.0000 1 Nut, Hex .125” FPT
19 41280.0001 1 Elbow,.375” Multi Barb
20 12422.0000 2 Clamp, Hose .47"/.54" I.D.
21 03236.0007* 1 Tube, Silicone .312" I.D. x 25" (Order item 24)
22 02434.0010* 1 U-Channel 2.0" (Order item 23)
23 21801.0002 1 Tube .375" O.D.
24 20541.0001 2 Heat Sink (Also order item 26)
01382.0007 4 Screw, Truss Head 6-32 x .38"
25 12565.0028 2 Triac Assy, 40 amp, 120V
02328.0003 2 Screw, Pan Head #6-32 x .312"
01520.0000 2 Lockwasher #6
26 M2522.1000 - Heat Sink Compound
27 02434.1000 - U-Channel 18.0" (Use as required)
28 03236.1001 - Tube, Silicone .312" I.D. x 36.0"
03236.1003 - Tube, Silicone .312" I.D. x 60.0"
03236.1002 - Tube, Silicone .312" I.D. x 120.0"
29 03851.0000 2 Wire Nut
7
* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.
DIR Num: 29878.0004 06, November 2014
Not illustrated
29878.4 112513
RELEASED FOR PRODUCTION
BUNN
1
2
3
®
TANK AND MOUNTING BRACKETS
DUAL
4
5
6 7 10 8 9
8
DIR Num: 29878.0004 06, November 2014
P2682
29878.4 012113
Loading...