How it Works
BTL
Loading...
BTL-1500
User manual
10 pgs187.74 Kb0

BTL BTL-1500 User manual

Download
Page 1
User Manual
v100z2TN24/02/2003EN
Page 2
BTL - 1500 User Manual
CONTENTS
1
BASIC FEATURES.................................................................................................................................................. 3
Page 2 of 10
Page 3
BTL - 1500 User Manual
1 BASIC FEATURES
The BTL-1500 gynaecological chair is manufactured in four configurations: one-motor, two-motor, three-motor, and a three-motor chair with memory. The one-motor chair comes with electrically adjustable height while the positions of the seat and the back-rest are fixed. The two-motor configuration has electrically adjustable height and back-rest. The three-motor configuration offers electrical adjustment of all three parts - height, back-rest, and seat. The three-motor chair with memory also offers electrical adjustment of all three parts and in addition, it enables the user to pre-set the most commonly used positions of the chair. All chair configurations are supplied with the following standard accessories: leg supports, handgrips, a hand switch, holder for sanitary paper, and stainless steel trash bin. The chair can be additionally supplied with retractable castors, a foot switch, underhead pillow, step (integrated or detachable), colposcope holder, and lamp.
Page 3 of 10
Page 4
BTL - 1500 User Manual
2 USER MANUAL
2.1 Appearance (Three-motor Configuration)
The seat and back-rest leatherette upholstery is available in a wide range of colours. The frame is metal and varnished.
1. back-rest
2. seat
3. handgrips
4. leg supports (under heels)
5. fixing screw
6. stainless steel trash bin
7. motor for seat adjustment
8. integrated folding step
9. retractable castors
10. motor for back-rest adjustment
11. holder for sanitary paper
12. hand switch
Page 4 of 10
Page 5
BTL - 1500 User Manual
2.2 Chair Assembly and Initiation
Place the chair on a firm and even floor dimensioned for the chair weight. Minor surface unevenness can be eliminated by height-adjustable screws located at the feet of the chair. In case of any questions, please contact your BTL service technician or BTL Service Department. Connect the chair directly to the power source and check its functions by using the control unit.
2.3 Control Units
2.3.1 Hand Switch (standard)
Operation:
A desired position of the chair can be set according to arrows indicated on the hand switch. It is pre­set by the manufacturer that the A and B buttons are used to adjust height of the chair, the C and D buttons are used to adjust the position of the back-rest and the E and F buttons are used to adjust the position of the seat.
Programming (available only in three-motor modification with memory)
1) Keep the S button pressed during the whole programming time.
2) Set the desired position of the chair using buttons for adjustment of individual parts - height, back­rest, and seat.
3) Press the number of the programme (1-3).
4) Release the S button.
To adjust the position of the chair according to a pre-set programme, press the number of the corresponding programme.
The number of control units depends on the selected chair configuration.
2.3.2 Foot Switch (optional)
Operation:
The foot switch can be used to adjust one part of the chair instead of the hand switch (available only in one or two-motor configuration).
Page 5 of 10
Page 6
BTL - 1500 User Manual
3 ACCESSORIES
3.1 One-motor Configuration
Standard:
Hand switch for one motor Holder for sanitary paper (seat cover) Leg supports (under heels) Handgrips Stainless steel trash bin (50 x 15 x 15)
Additional:
Retractable castors with a lifting mechanism Foot switch Underhead pillow Leg supports with a special joint (under knees) Detachable step Integrated folding step Additional lamp Colposcope holder Holder for sanitary paper (backrest and seat cover) Extra width (70 cm)
3.2 Two-motor Configuration
Standard:
Hand switch for two motors Holder for sanitary paper (seat cover) Leg supports (under heels) Handgrips Stainless steel trash bin (50 x 15 x 15)
Additional:
Retractable castors with a lifting mechanism Foot switch Underhead pillow Leg supports with a special joint (under knees) Detachable step Integrated folding step Additional lamp Colposcope holder Holder for sanitary paper (backrest and seat cover) Extra width (70 cm)
3.3 Three-motor Configuration / with Memory
Standard:
Hand switch for three motors / Hand switch for three motors with the function to pre-set chair positions Holder for sanitary paper (seat cover) Leg supports (under heels) Handgrips Stainless steel trash bin (50 x 15 x 15)
Additional:
Retractable castors with a lifting mechanism Underhead pillow Leg supports with a special joint (under knees) Detachable step Integrated folding step Additional lamp Colposcope holder Holder for sanitary paper (backrest and seat cover) Extra width (70 cm)
Page 6 of 10
Page 7
BTL - 1500 User Manual
4 MAINTENANCE AND SAFETY
• Wash the upholstery with detergent. For disinfection use for example 10% Persteril. Do not use acetone-based substances!
• It is recommended to check the chair thoroughly once a month in order to detect loose cables, damaged cable insulation, etc. In case of any mechanical or other damage, do not use the chair and contact your service technician.
4.1 Safety Measures
• Read the manual carefully before using the chair.
• All the chair users have to be instructed in operation, maintenance and safe use of the chair by the manufacturer
or supplier.
• The power source, to which the chair is to be connected, has to comply with the electrical specifications of the chair. In case of any discrepancies, have it inspected by an electrician.
• Use the chair in a proper work environment described in Chapter 5 under Technical Parameters.
• Do not dismantle the chair. Removing the chair cover might result in an electric shock!
• Move the chair with castors only on an even surface! Otherwise, it is necessary to lift the table.
• The maximum chair load is 180 kg.
4.2 Warranty
The product is warranted against defects in materials and workmanship for a period of one year from the date of shipment. The manufacturer will at its option repair or replace components which prove to be defective during the warranty period provided that the product is used in accordance with the manual. Should the product be returned to the manufacturer for repair or replacement, it must be sent carriage paid.
Page 7 of 10
Page 8
BTL - 1500 User Manual
5 TECHNICAL PARAMETERS
1. Identification
1.1.Product type BTL-65 BTL-1500
1.2.Product name gynaecological chair gynaecological chair
1.3.Configurations 1-motor 1-motor
2-motor 2-motor 3-motor 3-motor 3-motor with memory 3-motor with memory
1.4.Field of use medical equipment
2. Operating conditions
2.1.Temperature +10°C to +40°C
2.2.Relative humidity 30% to 75%
2.3.Atmospheric pressure 700 to 1060hPa
2.4.Position horizontal
2.5.Mode of operation continuous
3. Storage conditions
3.1.Temperature -10°C to +55°C
3.2.Relative humidity 25% to 85%
3.3.Atmospheric pressure 650 to 1100hPa
3.4.Position horizontal
3.5.Maximum duration 1 year
4. Transport conditions
4.1.Temperature -10°C to +55°C
4.2.Relative air humidity 25% to 85%
4.3.Atmospheric pressure 650 to 1100hPa
4.4.Position horizontal
4.5.Maximum duration 1 year
5. Power supply
6. Voltage insulation
6.1.Mains - Patient 4 kV
7. Specifications
9.1.Weight 68 kg
9.2.Dimensions Height 86 - 106 cm Width 60 or 70 cm
Back-rest length 90 cm Seat length 40 cm Standard back-rest tilt 30°
(other adjustment available upon request)
Standard seat tilt 0° (other adjustment available upon request)
9.3.Cover according to EN 60529 IP20
9.4.Control unit switch with 2, 4, 6, or 10 buttons
manufacturing commercial
220 V, 50 Hz
Page 8 of 10
Page 9
BTL - 1500 User Manual
8. Electrically adjustable features
Feature Range Step
Seat tilt 0 - 45° continuous
Back-rest tilt 5° - 50° continuous
Height adjustment 86 - 106 cm continuous
9. Classification
Class according to 60601-1 II Applied part B type Class according to NV 180 (93/42/EEC) I
10. Applicable standards
1 Medical electrical equipment EN 60601-1
2 Amendment to EN 60601-1 A2
3 Amendment to EN 60601-1 A12
4 Amendment to EN 60825-1 A11
5 Medical electrical equipment EN 60601-1-2
Electric compatibility. Requirements and tests.
6 Medical devices EN 1441
Risk analysis
7 Biological evaluation of medical devices EN ISO 10993-1
11. Certificates
Type Standards
Protocol 4 TestCom
Testing
laboratory
Page 9 of 10
Page 10
BTL - 1500 User Manual
Manufacturer:
Medical Technologies s.r.o. Heleny Malirove 11 169 00 Prague 6 Czech Republic tel/fax: +420 233 355 584
Representative:
BTL Industries Limited Suite 401 Albany House 324-326 Regents Street London WIB 3BL United Kingdom
tel: +4420 8371 2267 fax: +4420 8371 2270 email: btl@cobus.net
International Sales:
BTL s.r.o. Heleny Malirove 11 169 00 Prague 6 Czech Republic
tel.: +420 220 517 012, 220 514 753 fax: +420 220 515 520 e-mail: sales@btlnet.com
http://www.btlnet.com
© All rights reserved. No part of this manual may be reproduced, saved in a research centre or transferred by any means incl. electronic, mechanic, photographic or other records without previous approval from Medical Technologies s.r.o.
The contents of this document is provided "as is ". Except as required by applicable law, no warranties of any kind, either expressed or implied, are made in relation to the accuracy, reliability or contents of this document. Medical Technologies s.r.o. reserves the right to revise this document or withdraw it at any time without prior notice.
Page 10 of 10
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use