Page 1
BT Digital Baby Monitor 350 Lightshow
User Guide
2292 Baby Monitor 350 UG [4].indd 1 17/06/2014 14:10
Page 2
Welcome…
to your BT Digital Baby Monitor
350 Lightshow
• Digital sound quality with high definition sound (Hi-dsTM)
lets you hear your baby breathe, gurgle, snuffle or cry
with complete clarity
• Wireless range of up to 300m outdoors and up to 50m
indoors (in ideal conditions, where there is a clear line
of sight between the units) – giving you the freedom to
move around with clear reception and no interference
from other baby monitors
• Out of range warning
• Link light provides continuous confidence that the Parent
unit is receiving a signal from the Baby unit and will alert
you if the link is lost
• 18 songs to play from the Baby unit
• Talk Back feature lets you instantly reassure and calm
your baby
• Adjustable nightlight brightness on Baby and Parent unit
• Lightshow
• Room temperature monitor
• Crying alert on Parent unit
• Feed timer and alert on Parent unit
• Torch on Parent unit
2292 Baby Monitor 350 UG [4].indd 2 17/06/2014 14:10
Page 3
This User Guide provides you with all
the information you need to get the
most from your BT Digital Baby Monitor
350 Lightshow.
Please read this guide carefully and
keep it for future reference.
Need help?
If you have any problems setting up or using your
BT Digital Baby Monitor 350 Lightshow (or would
like any additional or replacement batteries), call
our free Helpline on 0800 145 6789*.
Our dedicated advisors are more likely to be
able to help you than the retailer where you
made your purchase.
Alternatively, you may find the answer in the
‘Help’ section at the back of this guide.
Additional answers to Frequently Asked Questions
are also available from bt.com/producthelp
* Calls made from within the UK mainland network are free.
Mobile and international call costs may vary.
Got everything?
• Baby unit
• Parent unit
• 2 x AA NiMH 1300mAh
rechargeable batteries
for Parent unit (pre-installed)
• Parent unit charger
• 2 x power adapters
(item code 077861)
• Tilt cup
2292 Baby Monitor 350 UG [4].indd 3 17/06/2014 14:10
Page 4
4
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
4
• Your BT Digital Baby Monitor 350 Lightshow is designed to be an aid and should
not be used as a substitute for responsible and proper adult supervision.
• Make sure the Baby unit, Parent unit and mains adapter cables are kept out of
reach of your baby – at least one metre away.
• Never place the Baby unit inside your baby’s cot, bed or playpen.
• Never cover your Parent or Baby units (e.g. with clothes, towels or blankets).
• Never use or place your Parent or Baby units in moist places or near water.
• If travelling abroad, make sure that the voltage shown on the mains power
adapter corresponds to the local mains power before connecting to the
power supply.
• There is a risk of explosion if the batteries are replaced by an incorrect type.
• Always dispose of batteries in accordance with applicable waste disposal
regulations, never in your household rubbish, see page 42.
• During continual use the Baby unit and Parent unit power adapters may become
warm to the touch. This is normal and is not something to be concerned about.
• In the event of a power failure, when the power is restored all your settings will
remain unchanged.
Important safety information
2292 Baby Monitor 350 UG [4].indd 4 17/06/2014 14:10
Page 5
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
5
Important safety information ............4
Your BT Digital Baby Monitor
350 Lightshow
Parent unit ........................................7
Parent unit display icons .....................8
Parent unit charger ............................9
Baby unit ........................................10
Back of the Baby unit .......................11
Parent unit menu map......................12
Setting up
Parent unit ......................................13
Baby unit ........................................15
Switch on and link the Parent
and Baby units .................................15
Using your BT Digital Baby Monitor
350 Lightshow
Switch the Baby unit on ...................17
Switch the Parent unit on .................17
Switch the Baby unit off ...................17
Switch the Parent unit off .................17
Baby sound level LED indicators .......18
Adjust the loudspeaker volume .........19
Lightshow .......................................20
Using the tilt cup .............................20
Switch lightshow on/off
using the Baby unit ..........................21
Switch lightshow on/off
using the Parent unit ........................21
Set the lightshow timer ....................21
Talk Back .........................................22
Find ................................................23
Torch ...............................................23
The Parent unit menu .......................24
Nightlight .......................................25
Switch nightlight on/off
using the Baby unit ..........................25
Switch nightlight on/off
using the Parent unit ........................25
In this guide
2292 Baby Monitor 350 UG [4].indd 5 17/06/2014 14:10
Page 6
In this guide
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
6
Select the nightlight brightness level
using the Parent unit ........................26
Set the nightlight timer ....................26
Play music from the Baby unit ..........27
Turn music on/off
using the Baby unit ..........................27
Turn music on/off
using the Parent unit ........................27
Choose a song to play
using the Parent unit ........................28
Set a play time for music ..................29
Feed Timer ......................................29
Set the feed timer
countdown duration ........................29
Start the feed timer countdown ........30
Cancel the feed timer countdown .....31
Switch timer repeat option on or off . . 31
Select the type of feed timer alert .....32
Temperature monitor .......................32
Temperature monitor indicators ........33
Change the temperature
display format .................................33
Select the type of temperature alert . .34
Temperature alert options ................34
Adjust the temperature ....................35
Reset the temperature .....................35
Crying alert .....................................36
Select the type of crying alert ...........36
Backlight .........................................37
List of tones ....................................37
Reset the units ................................38
Reset the Parent unit .......................38
Reset the Baby unit ..........................38
Help ...............................................39
General information
Cleaning ..........................................41
Guarantee .......................................41
Product disposal instructions ............42
R&TTE .............................................42
Declaration of Conformance .............42
User Guide formats ..........................42
2292 Baby Monitor 350 UG [4].indd 6 17/06/2014 14:10
Page 7
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
7
Parent unit
Your BT Digital Baby Monitor 350 Lightshow
Baby sound level LEDs
Indicates the level of received
sound. The LEDs will light up
progressively as the sound
increases. See page 18 for
further information.
Torch (on back of unit)
Press to switch the torch
feature on and off.
LCD Display
Power saving backlight
turns on when there’s an alert
or when you press any button
and then switches off after
15 seconds.
Talk
Press to talk to your baby.
Menu
Press to open the menu.
Press and hold to exit the menu
and return to the idle screen.
Microphone
Mute LED
Red indicates that Mute
has been switched on.
Battery LED status indicator
(on top of unit)
Red flashing light indicates
the batteries are low and
need re-charging. Solid red
indicates the Parent unit
is charging.
Link indicator
Steady green indicates that
the Baby and Parent units are
linked. Flashes green if no link
established for 30 seconds.
Flashes red if no link established
after 30 seconds. Also flashes
green when the Talk button is
pressed on the Parent unit to
initiate parental talk back.
Power on/off
Press and hold to switch the
power on or off.
OK
Press to confirm the menu
option displayed.
Up
Increase speaker volume.
Scroll through the menu options.
Down
Decrease speaker volume. Scroll
through the menu options.
2292 Baby Monitor 350 UG [4].indd 7 17/06/2014 14:10
Page 8
Your BT Digital Baby Monitor 350 Lightshow
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
8
Temperature alert (vibrate on)
Temperature alert (vibrate off)
Displays the temperature as
measured at the Baby unit
Crying alert (vibrate on)
Crying alert (vibrate off)
Feed timer on (vibrate on)
Feed timer on (vibrate off)
Full charge (75-100%)
Medium charge (51-74%)
Low charge (25-50%)
Empty (8-24%)
Flashing (0-7%). Typically you
will be able to use your Parent
unit for at least one hour after
the battery icon starts to flash.
Icon will scroll when charging
Indicates when you can
scroll up or down through
the menu options
Parent unit display icons
Menu options:
Lightshow Nightlight Music Feed Timer Setup
Battery status
2292 Baby Monitor 350 UG [4].indd 8 17/06/2014 14:10
Page 9
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
Your BT Digital Baby Monitor 350 Lightshow 9
Charging light
Red when the Parent unit is
correctly placed on the charger.
Power socket
For connection to the mains
power socket via the power
adapter cable supplied.
Parent unit charger
Front
Back
2292 Baby Monitor 350 UG [4].indd 9 17/06/2014 14:10
Page 10
Your BT Digital Baby Monitor 350 Lightshow
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
10
Power on/off
Press and hold to switch
the power on or off.
Volume +/–
Increase or decrease the
loudspeaker volume for playing
music or for parental talk back.
Microphone
Music
Press to switch music
on at the Baby unit
(the music and duration will
be as last set at the Parent unit).
Press again to switch
the music off.
Temperature indicator
Indicates when the temperature
goes outside the range set.
Temperature sensor
Make sure the sensor is placed
with clear space around it and
not in contact with any surfaces
to ensure it works effectively.
Lightshow
Press to switch the
Lightshow on or off.
Nightlight
/
Illuminates around the base.
Press
or to switch the
nightlight on.
Press and hold
for 2 seconds
to switch the nightlight off.
Find
Press to emit an alert
beep from the Parent unit–
useful for finding the Parent
unit if you’ve misplaced it.
Link indicator
Steady green indicates that
the Baby and Parent units are
linked. Flashes green if no link
established for 30 seconds.
Flashes red if no link established
after 30 seconds. Also flashes
green when the Talk button is
pressed on the Parent unit to
initiate parental talk back.
Baby unit
2292 Baby Monitor 350 UG [4].indd 10 17/06/2014 14:10
Page 11
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
Your BT Digital Baby Monitor 350 Lightshow 11
Back of the Baby unit
Power socket
For connection to the mains
power socket via the power
adapter cable supplied.
Tilt cup
Place the Baby unit on the tilt
cup to direct the projection
of the lightshow.
2292 Baby Monitor 350 UG [4].indd 11 17/06/2014 14:10
Page 12
Your BT Digital Baby Monitor 350 Lightshow
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
12
Parent unit menu map
Menu
Lightshow
Nightlight
Music
Feed Timer
Setup
Turn (On/Off)?
Timer
Turn (On/Off)?
Brightness
Timer
(Play/Stop)?
Choose Song
Timer
(Start/Stop) Timer
Duration
Timer Repeat
Timer Alert
Temperature
Crying Alert
Backlight
High
Medium
Low
5 min
10 min
15 min
Constant
Set Time
Repeat On
Repeat Off
Beep
Beep&Vibe
Vibrate
Screen only
On w alerts
Off w alerts
5 min
10 min
15 min
Constant
5 min
15 min
60 min
Constant
Lullabies
Nature
Classical
White noise
Beep
Beep&Vibe
Vibrate
Temp Format
Temp Alert
Adjust Temp?
Reset Temp?
Scroll Options
Play All
Scroll Options
Play All
Scroll Options
Play All
Scroll Options
Play All
2292 Baby Monitor 350 UG [4].indd 12 17/06/2014 14:10
Page 13
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
13Setting up
WARNING!
Only use the power adapters
supplied. Using incorrect power
adapters may permanently
damage your product.
Battery performance
Rechargeable batteries
in the Parent unit will last
approximately 20 hours in
normal use. Please note that
new batteries do not reach full
capacity until they have been in
normal use for several days.
The charge capacity of
rechargeable batteries will
reduce with time as they
wear out, so reducing the
performance time of the Parent
unit. Eventually they will need
to be replaced. New batteries
can be obtained from the
BT Digital Baby Monitor 350
Lightshow Helpline on
0800 145 6789*.
Parent unit
1. Plug one of the power adapter cables into the
socket marked
on the back of the Parent unit
charger and plug the other end into the mains
power wall socket and switch the power on.
2. Activate the batteries by pulling the plastic tab
away from the back of the Parent unit.
24
2292 Baby Monitor 350 UG [4].indd 13 17/06/2014 14:10
Page 14
Setting up
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
14
3. Place the Parent unit into the charger. The red
charging light will illuminate on the charger, the
battery icon will start scrolling on the Parent unit
display and the battery LED will be solid red to
indicate that the batteries are being charged.
Leave the batteries to charge for 24 hours to reach
maximum charge. When the batteries are fully
charged the battery icon on the display will show a
full charge
.
The Parent unit rechargeable
batteries will lose charge over
a period of time, even if
switched off.
Battery low warning –
Parent unit
When the batteries are low –
approximately within 1 hour of
running out – the Parent unit
will emit a low battery alert, the
low battery indicator will turn
red, the display will show
Low
Battery and the icon on
top of the unit will flash. Place
the Parent unit back on the
charger to charge the batteries.
To speed up the charging
process turn the Parent unit
off when charging if it’s not
being used.
Charging light
Battery LED (on top of unit)
Low battery indicator
2292 Baby Monitor 350 UG [4].indd 14 17/06/2014 14:10
Page 15
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
Setting up 15
Baby unit
1. Plug the remaining power adapter cable into the
socket marked
on the back of the Baby unit
and plug the other end into the mains power and
switch on.
Switch on and link the Parent and Baby units
1. Press and hold the
button on the Baby unit until
the nightlight briefly illuminates and the green Link
indicator flashes.
2. Press and hold the
button on the Parent unit
until all the LEDs on the unit briefly illuminate.
The green Link indicator will flash and the display
will show I’m Linking.
WARNING
Always use rechargeable
batteries in the Parent unit.
Only use the recommended
type – 2 x AA NiMH 1300mAh
batteries. Using other types
could permanently damage the
unit. Charge the batteries as
instructed in this user guide.
The Parent unit can still be used
when it is in the charger.
Removing the batteries
If you ever need to remove
the batteries, simply slide
open the battery compartment
cover and use the ribbon to
eject the batteries.
2292 Baby Monitor 350 UG [4].indd 15 17/06/2014 14:10
Page 16
Setting up
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
16
Positioning your units
The Baby unit should ideally be
within 1m-2m of your baby for
best performance.
If you place the Parent and
Baby units too close together
you will hear a high pitched
noise, this is normal. The units
are designed to be located at
a distance from one another,
e.g. in separate rooms.
Once the units are linked the green Link indicator
on the Parent unit and the Baby unit will stop
flashing and remain a steady green. The units are
now ready to use.
Important:
The link confirmation between the two units is vital
for use so they can communicate. If the link between
the units is broken at any time, the Link indicators on
both units will flash green as they try to search for
each other. The Parent unit displays I’m Linking...
After 30 seconds, if the link is still broken, the Baby and
Parent units Link indicators will flash red. The Parent
unit display will show Not Linked and you will hear
an alert signal.
If the link is broken:
• check that the mains power is plugged in and
switched on at the Baby unit
• check that both units are switched on
• check that the batteries are charged in the
Parent unit
• check that the Parent and Baby units are within
range of each other (in ideal conditions the range
is up to 300 metres outdoors and 50m indoors)
2292 Baby Monitor 350 UG [4].indd 16 17/06/2014 14:10
Page 17
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
17
Switching on/off
Switch the Baby unit on
1. Press and hold the
button until the nightlight
briefly illuminates and the green Link indicator
flashes. Once linked the green Link indicator will
remain on.
Switch the Parent unit on
1. Press and hold the
button on the Parent unit
until all the LEDs briefly illuminate. The green
Link indicator will flash and the display will show
I’m Linking.
Once the units are linked the green Link indicators
on the Parent and Baby units will stop flashing
and remain a steady green. The units are now
ready to use.
Switch the Baby unit off
1. Press and hold the
button on the Baby unit. The
green Link indicator will switch off.
Switch the Parent unit off
1. Press and hold the
button on the Parent unit
until an audible alert sounds. The green Link
indicator will switch off and the display will go blank.
Using your BT Digital Baby Monitor 350 Lightshow
2292 Baby Monitor 350 UG [4].indd 17 17/06/2014 14:10
Page 18
Using your BT Digital Baby Monitor 350 Lightshow
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
18
Baby sound level LED indicators
LEDs 1-4 = Green LEDs 5-7 = Red
The seven LEDs across the top of the Parent unit
light up to indicate the level of sound being
received from the Baby unit. The LEDs light up
progressively as the sound increases.
LEDs 1-2 light up Green when sounds of 57dB and
63dB are received.
LEDs 3-4 light up Green when sounds of 69dB and
75dB are received.
LEDs 5-7 light up Red when sounds of 83dB, 89dB
or 95dB are received.
Equivalent sound
level examples:
60dB-70dB =
normal conversation
75dB = loud conversation
83-95dB = loud traffic noise
2292 Baby Monitor 350 UG [4].indd 18 17/06/2014 14:10
Page 19
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
Using your BT Digital Baby Monitor 350 Lightshow 19
If you try and set the volume
higher or lower than the 5
settings available on either unit
you will hear an error tone.
The default loudspeaker volume
on both units is Level 3.
If the
or buttons are
pressed whilst the Parent unit
is muted the loudspeaker
volume will return to Level 3
automatically.
Adjust the loudspeaker volume
At the Parent unit:
1. Press
or to select the required level.
The first press will show the current setting.
There are 5 volume levels and off (Mute). The
volume level will be shown on the display at each
press, e.g. Level 3 is shown as Volume
.
If you wish to switch the volume off, keep pressing
until the display shows Volume Off.
The Mute LED will illuminate and you will hear a
confirmation tone.
At the Baby unit:
There are 5 volume settings.
1. When Music is being played or Talk back is in
progress from the Parent unit, press the
or
button to adjust the volume.
2. If no music or Talk back is in use, pressing the
or buttons will adjust the volume. You will
hear a beep at each press.
2292 Baby Monitor 350 UG [4].indd 19 17/06/2014 14:10
Page 20
Using your BT Digital Baby Monitor 350 Lightshow
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
20
Lightshow
The Baby unit has a lightshow feature that projects
a starry image onto the ceiling of your baby’s room.
A tilt cup is supplied and can be placed underneath
the Baby unit to enable you to direct the lightshow
projection. You can set a period of time for the
lightshow to illuminate using the Parent unit menu.
Using the tilt clip
Place the Baby unit in the tilt cup and switch the
lightshow on (see page 21). Adjust the position of
the Baby unit until the lightshow is projected at the
best angle.
Tilt clip
2292 Baby Monitor 350 UG [4].indd 20 17/06/2014 14:10
Page 21
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
Using your BT Digital Baby Monitor 350 Lightshow 21
The Baby unit must be switched
on for the lightshow to work
but need not be linked to the
Parent unit.
The default setting is
Constant.
Switch lightshow on/off using the Baby unit
1. To switch on, press the
button.
2. To switch off, press the
button.
Switch lightshow on/off using the Parent unit
1. Press
. Lightshow is displayed, press .
2. Press
or to display either Turn On?
or Turn Off and press
Set the lightshow timer
1. Press
. Lightshow is displayed, press .
2. Turn On/Off? is displayed, press
until Timer
is displayed and press
.
3. Press
or to display either 5 min,
10 min, 15 min or Constant and press
to
select. The display will show Saved briefly and
you’ll hear a confirmation tone.
2292 Baby Monitor 350 UG [4].indd 21 17/06/2014 14:10
Page 22
Using your BT Digital Baby Monitor 350 Lightshow
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
22
You will be able to activate
Talk Back mode even if other
functions have been activated
at the Baby unit like Music
playback or Nightlight on.
Press
or on the Baby
unit to adjust the Talk Back
volume level of the Baby unit
loudspeaker.
Do not press the
button
when the Baby unit and
Parent unit are positioned in
the same room. High-pitch
noise will be generated if the
button is pressed when
Baby unit and Parent unit are
close to each other or within
3 metres distance.
When using Talk Back, hold
the Parent unit approximately
30cm in front of your mouth
when talking to baby.
Talk Back
You can use the Parent unit Talk Back feature as a
one way intercom to comfort and reassure your
baby. By speaking into the Parent unit your baby
will hear your voice from the Baby unit. Please note
that when using Talk Back you will not be able to
hear your baby until you release the
button.
1. Press and hold down the
button on the Parent
unit to speak to your baby.
Whilst the
button is depressed the display will
show Talk and the green Link indicators will flash
on both units.
2292 Baby Monitor 350 UG [4].indd 22 17/06/2014 14:10
Page 23
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
Using your BT Digital Baby Monitor 350 Lightshow 23
Find
You can press the button on the Baby unit to
make the Parent unit sound an alert to help you
find it if it’s been misplaced. If the Parent unit
loudspeaker volume had been Muted (or set to
volume off), the volume level will be reset to the
default setting of Level 3.
1. Press
on the Baby unit. The paging alert will
sound at the Parent unit and the display will show
Here I am!
2. To stop the alert, press any button on the Parent
unit or press the
button again on the Baby unit.
If no button is pressed after 2 minutes then the
alert will automatically stop.
Torch
The Parent unit has a high intensity white LED torch
that can be used when the Parent unit is switched
on or off.
1. Press the
button located on the back of the
Parent unit to switch the Torch on and off.
2292 Baby Monitor 350 UG [4].indd 23 17/06/2014 14:10
Page 24
Using your BT Digital Baby Monitor 350 Lightshow
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
24
The Parent unit menu
The button on the Parent unit can be used to
select and change settings on the Baby unit without
having to risk disturbing your baby. You can access
the settings by:
1. Press
then press or to scroll through the
menu options shown on the top of the display. Press
when the option you want is displayed.
2. The first sub menu option will be displayed, press
to scroll through the options. The ( arrows)
indicate when you can scroll either up or down.
Press
when the option you want is displayed.
3. To exit the menu at any time, press
briefly
and step back one menu level at a time, or press
and hold
to return to the idle screen. If no
buttons are pressed for 10 seconds whilst accessing
the menu, the display will return to idle and any
unsaved changes will be lost.
2292 Baby Monitor 350 UG [4].indd 24 17/06/2014 14:10
Page 25
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
Using your BT Digital Baby Monitor 350 Lightshow 25
The Baby unit must be switched
on for the nightlight to work,
but need not be linked to the
Parent unit.
To adjust the brightness level
or set the nightlight timer,
see page 26.
You can also switch the
nightlight on/off using the
Parent unit menu using the
nightlight menu option.
Nightlight
You can set a comforting nightlight on the Baby
unit. There are 3 brightness levels to choose from
and you can set a period of time for the nightlight
to illuminate.
Switch nightlight on/off using the Baby unit
1. To switch on, press the
or button.
2. To switch off, press and hold
for 2 seconds or
keep pressing
until you reach the level below
the lowest brightness level.
Switch nightlight on/off using the Parent unit
1. Press
. Lightshow is displayed, press to
display Nightlight and press
.
2. Press
or to display either Turn On, or Turn
Off and press
.
2292 Baby Monitor 350 UG [4].indd 25 17/06/2014 14:10
Page 26
Using your BT Digital Baby Monitor 350 Lightshow
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
26
Select the nightlight brightness level using the
Parent unit
1. Press
. Lightshow is displayed, press to
display Nightlight and press
.
2. Turn On/Off? is displayed, press
to display
Brightness and press
.
3. Press
or to display either Low, Medium or
High and press
to select. The display will show
Saved briefly and you’ll hear a confirmation tone.
Set the nightlight timer
1. Press
. Lightshow is displayed, press to
display Nightlight and press
.
2. Turn On? is displayed, press
until Timer is
displayed and press
.
3. Press
or to display either 5 min, 15 min,
60 min or Constant and press
to select.
The display will show Saved briefly and you’ll
hear a confirmation tone.
The default setting is Medium.
The default setting is
Constant.
2292 Baby Monitor 350 UG [4].indd 26 17/06/2014 14:10
Page 27
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
Using your BT Digital Baby Monitor 350 Lightshow 27
The default music setting
is Lullaby, Play All songs
Constantly.
After power-on, there may
be a delay of a few seconds
before the Baby unit is ready
to play music.
Adjust the volume of the music
using the
or buttons on
the Baby unit.
If music is played at greater
than volume 3, the Crying Alert
may activate if Mute is used.
Play music from the Baby unit
The Baby unit has 18 songs that can be played
to gently soothe your baby. The songs have been
grouped into 4 categories: Lullabies, Nature,
Classical and White Noise.
You can select one song to play repeatedly or select
the Play All option for a medley of the songs from
your selected category. The songs can be set to play
in a loop for 5, 10 or 15 minutes or you can leave
them playing constantly.
Turn music on/off using the Baby unit
1. To turn the music on, press the
button. The most
recently selected song will start playing at the time
period last selected using the Parent unit.
2. To turn the music off, press the
button.
Turn music on/off using the Parent unit
1. Press
. Lightshow is displayed, press until
Music is displayed and press
.
2. Play? or Stop? is displayed, press
.
2292 Baby Monitor 350 UG [4].indd 27 17/06/2014 14:10
Page 28
Using your BT Digital Baby Monitor 350 Lightshow
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
28
Choose a song to play using the Parent unit
1. Press
. Lightshow is displayed, press until
Music is displayed and press
.
2. Play? (or Stop) is displayed, press
to display
Choose Song and press
.
3. Use the
or buttons to display the category of
song you want: Lullabies, Nature, Classical
or White Noise and press
to select.
4. Use the
and buttons to scroll through the
individual song titles and press
when the option
you want is displayed. Or, you can select Play All,
to play a medley of the songs from your selected
category. The display will show Saved briefly and
you’ll hear a confirmation tone.
You need to turn the music on
before you can choose a song.
2292 Baby Monitor 350 UG [4].indd 28 17/06/2014 14:10
Page 29
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
Using your BT Digital Baby Monitor 350 Lightshow 29
Set a play time for music
1. Press
. Lightshow is displayed, press until
Music is displayed and press
.
2. Play? is displayed, press
until Timer is
displayed and press
.
3. Use the
or buttons to scroll through the
options: 5 min, 10 min, 15 min or Constant and
press
when the option you want is displayed.
The display will show Saved briefly and you’ll hear
a confirmation tone.
Feed Timer
You can set a Feed Timer on the Parent unit to act
as a countdown timer that will alert you when you
next need to feed your baby. You have a choice
of alert types (beep, beep & vibe and vibrate)
and you can set the timer to repeat itself once
the alert sounds.
Set the feed timer countdown duration
1. Press
. Lightshow is displayed, press until
Feed Timer is displayed and press
.
2. Start? (or Stop? if the countdown has started)
is displayed, press
to display Duration and
press
.
2292 Baby Monitor 350 UG [4].indd 29 17/06/2014 14:10
Page 30
Using your BT Digital Baby Monitor 350 Lightshow
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
30
3. The display will show 02h:00m (or the currently
set timer). Use the
and buttons to
select the first digit and press
. Repeat this
procedure for each digit and press
. The display will
show Saved and you’ll hear a confirmation beep.
Start the feed timer countdown
1. Press
. Lightshow is displayed, press until
Feed Timer is displayed and press
.
2. Start? is displayed, press
. The display will
briefly show Timer On and then the timer will be
shown counting down the seconds from the time
you set.
When the timer has finished counting down to
00:00 you will hear an alert beep and the timer
and
icon will flash. Press any button on the
Parent unit to stop the alert. If you do not stop the
alert it will automatically stop after 2 minutes (or it
will start again if Timer Repeat has been set to On).
The timer can be set from 1
minute to 99 hours 59 minutes.
The feed timer default
countdown duration is set at
02:00 (2 hours).
If the Parent unit is switched
off, the feed timer countdown
will be cancelled and you will
need to start it again when the
unit is switched back on. The
duration, alert type and repeat
settings will still be retained.
2292 Baby Monitor 350 UG [4].indd 30 17/06/2014 14:10
Page 31
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
Using your BT Digital Baby Monitor 350 Lightshow 31
The default setting is Repeat On.
Cancel the feed timer countdown
1. Press
. Lightshow is displayed, press until
Feed Timer is displayed and press
.
2. Stop? is displayed, press
. The display will
briefly show Timer Off, the timer will then
disappear.
Switch timer repeat option on or off
1. Press
. Lightshow is displayed, press until
Feed Timer is displayed and press
.
2. Start? is displayed, press
until Timer Repeat
is displayed and press
.
3. Use the
or buttons to display either Repeat
On or Repeat Off and press
to select.
The display will show Saved and you will hear a
confirmation beep.
When Repeat On has been set, the feed timer
countdown will start again once the alert has
sounded if it is not switched off.
2292 Baby Monitor 350 UG [4].indd 31 17/06/2014 14:10
Page 32
Using your BT Digital Baby Monitor 350 Lightshow
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
32
Select the type of feed timer alert
1. Press
. Lightshow is displayed, press until
Feed Timer is displayed and press
.
2. Start? (or Stop? if the feed timer is already
on) is displayed, press
until Timer Alert is
displayed and press
.
3. Use the
and buttons to display either Beep,
Beep&Vibe or Vibrate and press
to select.
The display will show Saved and you will hear a
confirmation beep.
Temperature monitor
There is a temperature sensor on the Baby unit
to constantly monitor the temperature in your
baby’s room. You’ll be alerted if it gets too hot, too
warm or too cold by the colour of the temperature
indication LED on the Baby unit and the Parent
unit will vibrate, sound an alert beep and display
a message on the screen. The alerts on the Parent
unit can be changed, see page 34. The temperature
will be constantly shown on the Parent unit display
in ˚C (or ˚F if you’ve changed the format).
To stop an alert beep, press any button on the
Parent unit.
Feed timer alert options:
Beep = Parent unit will emit
an alert beep only.
Beep&Vibe = Parent unit will
emit an alert beep and vibrate.
Vibrate = Parent unit will
vibrate only.
The default setting is
Beep&Vibrate.
2292 Baby Monitor 350 UG [4].indd 32 17/06/2014 14:10
Page 33
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
Using your BT Digital Baby Monitor 350 Lightshow 33
IMPORTANT!
The temperature sensor used
in this BT Digital Baby Monitor
350 Lightshow is intended as
a guide, to provide parents
with an indication of the room
temperature in which the Baby
unit has been placed.
It is designed to operate within
an approximate tolerance of
+/- ½°C and is not intended to
be as accurate as some medical
devices. Please note that your
own temperature reference e.g.
your central heating thermostat
may not be as accurate, possibly
due to tolerances and positioning
of the thermostat in relation to
the BT Digital Baby Monitor 350
Lightshow.
Healthcare professionals advise
that the ideal temperature for
your baby’s room is between
16 °C and 20°C.
Your Parent unit has a built-in
mechanism to prevent repeated
annoying audible alerts if the
room temperature hovers
around an alerting threshold.
Temperature monitor indicators
Temperature On the Baby unit On the Parent unit
Below 16°C Nightlight
glows Blue
Display shows
Too Cold
16 – 20°C Nightlight
glows Yellow
21 – 24°C Nightlight
glows Orange
Display shows
Too Warm
Over 24°C Nightlight
glows Red
Display shows
Too Hot
Change the temperature display format
1. Press
. Lightshow is displayed, press to
display Setup and press
.
2. Temperature is displayed, press
.
3. Temp Format is displayed, press
.
4. Press
or to select ºC or ºF and press .
The display will show Saved and you will hear a
confirmation beep.
2292 Baby Monitor 350 UG [4].indd 33 17/06/2014 14:10
Page 34
Using your BT Digital Baby Monitor 350 Lightshow
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
34
Select the type of temperature alert
1. Press
. Lightshow is displayed, press to
display Setup and press
.
2. Temperature is displayed, press
.
3. Press
until Temp Alert is displayed and press
.
4. Use the
and buttons to display either Beep,
Beep&Vibe, Vibrate or Screen Only and press
to select. The display will show Saved and you
will hear a confirmation beep.
To stop an alert beep, press any button on the
Parent unit.
Temperature alert options
Beep = Parent unit will beep.
icon will flash.
Beep&Vibe = Parent unit will beep and vibrate.
icon will flash.
Vibrate = Parent unit will vibrate.
icon
will flash.
Screen Only =
icon will flash.
All of the above alerts will also display the
appropriate message: Too Hot or Too Cold.
Adjust the temperature
Pre-set temperature
alert range
The Baby unit comes with
pre-set maximum and
minimum temperatures,
as recommended by the UK
Department of Health as part
of the recommendations to
reduce the risk of cot death.
If the temperature falls below or
goes above the setting an alert
will sound on the Parent unit
and the display will show
To o
Cold or Too Hot as appropriate.
If it’s too hot, the Baby unit
temperature indication LED
will turn red and if too cold it
will turn blue. The temperature
alert pre-set temperatures are
15°C (and below) and 25°C
(and above).
Alerts will be repeated if the
temperature creeps by 2°C into
an alerting range.
The default setting is
Beep&Vibrate.
2292 Baby Monitor 350 UG [4].indd 34 17/06/2014 14:10
Page 35
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
Using your BT Digital Baby Monitor 350 Lightshow 35
Adjust the temperature
If you find the temperature displayed on the
Parent unit is slighlty different to another
thermometer or thermostat in your house, you
can adjust it to match.
1. Press
. Lightshow is displayed, press to
display Setup and press
.
2. Temperature is displayed press
.
3. Press
until Adjust temp? is displayed and
press
.
4. Enter Temp XX is displayed (where XX is the
current temperature). Use the
or buttons to
adjust the temperature and press
.
Reset the temperature
If you’ve adjusted the Parent unit temperature
(see above) you can reset it.
1. Press
. Lightshow is displayed, press to
display Setup and press
.
2. Temperature is displayed press
.
3. Press
until Reset Temp is displayed and press
. Saved will be displayed and you will hear a
confirmation beep.
2292 Baby Monitor 350 UG [4].indd 35 17/06/2014 14:10
Page 36
Using your BT Digital Baby Monitor 350 Lightshow
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
36
Crying alert
The crying alert will only be activated if the Parent
unit volume has been switched to volume off.
With Mute switched on, if your baby starts to cry
you will not be able to hear the cries, but if the cries
sound above a certain level i.e. if they reach 83dBA,
which is the 1st red Baby sound level LED, then the
Parent unit will activate the crying alert. The default
crying alert is for the Parent unit to vibrate and emit
an audible beep but you can select a different alert
if you want to.
Select the type of crying alert
1. Press
. Lightshow is displayed, press to
display Setup and press
.
2. Temperature is displayed, press
to display
Crying Alert and press
.
3. Use the
and buttons to display either Beep,
Beep&Vibe, Vibrate or Screen Only and press
to select. The display will show Saved and you
will hear a confirmation beep.
To stop an alert beep, press any button on the
Parent unit.
Crying alert options
Beep = Parent unit will beep,
Crying Alert will be displayed
and icon will flash.
Beep&Vibe = Parent unit will
beep and vibrate. Crying Alert
will be displayed and icon
will flash.
Vibrate = Parent unit will
vibrate only (no alert beep will
sound). Crying Alert will be
displayed and the icon
will flash.
Screen Only = Crying Alert
will be displayed and the
icon will flash.
The default setting is
Beep&Vibrate.
The Crying Alert is a ‘user alert’
as described on page 35.
2292 Baby Monitor 350 UG [4].indd 36 17/06/2014 14:10
Page 37
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
Using your BT Digital Baby Monitor 350 Lightshow 37
Backlight
You can select whether or not the LCD backlight
comes on when an alert is activated. When the
backlight comes on it will stay on for 15 seconds.
The default setting is On.
1. Press
. Lightshow is displayed, press to
display Setup and press
.
2. Temperature is displayed, press
until
Backlight is displayed and press
.
3. Use the
and buttons to display either
On w alerts or Off w alerts and press
to
select. The display will show Saved and you will
hear a confirmation beep.
List of tones
Your BT Digital Baby Monitor 350 Lightshow
can produce various tones. They have the
following meaning:
Tone Meaning
Single tone Confirmation tone e.g. setting saved.
Double tone (fast) Error tone e.g. max volume reached
when adjusting volume.
Double tone (slow) User alert e.g. crying alert, paging alert etc.
Triple tone (fast) System alert e.g. link lost, battery low etc.
2292 Baby Monitor 350 UG [4].indd 37 17/06/2014 14:10
Page 38
Using your BT Digital Baby Monitor 350 Lightshow
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
38
Resetting the units is
only advisable if you are
experiencing difficulties with
your product. It is a useful
feature that ensures your Baby
Monitor is returned to its new
“out of the box” settings.
User Alert tones can be silenced by pressing any
button on the Parent unit.
System Alerts can be silenced for a 5 minute period
by pressing any button on the Parent unit.
Reset the units
Resetting either units will return the settings at that
unit back to its default settings.
Reset the Parent unit
1. Within 3 seconds of the Parent unit being switched
on, press and hold the
button for at least
10 seconds. The display will show Reset for
2 seconds during the reset and then you will
hear a confirmation beep once the reset has
been performed.
Reset the Baby unit
1. Within 3 seconds of the Baby unit being switched
on, press and hold the Nightlight
button for at
least 10 seconds. You will hear a confirmation beep
once the reset has been performed.
2292 Baby Monitor 350 UG [4].indd 38 17/06/2014 14:10
Page 39
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
39Help
Helpline
If you have any problems using
your BT Digital Baby Monitor 350
Lightshow, call 0800 145 6789*.
Parent Unit is beeping
Please see page 37 for the list of
tones the Parent unit makes. The
Parent unit will beep for a number
of reasons:
• The link has been lost between
your units, see page 15-16. Check
that the Baby unit Link indicator is
illuminated. If not, please ensure
that the power adapter is still
connected and if this still does not
switch on, please test in a different
electrical socket.
• The feed timer has been set, see
pages 29-32.
• The crying alert is switched on, see
page 36.
• The temperature alert has been
triggered, see pages 32-35.
• The batteries are low, see pages 13-14.
• The Find button has been pressed on
the Baby unit, see page 23.
If the Parent unit still beeps after
checking the points opposite, please
try switching the Baby unit off at the
power and removing the batteries for
approximately 30 minutes. Ensure
the Parent unit is clean by wiping
with a damp cloth. If the problem
persists call the Helpline for advice.
Link light does not come on
• Check that both the Baby and Parent
units are switched on.
• Check that the batteries in the Parent
unit are correctly installed and that
they are charged.
• Check that the mains power is
plugged in and switched on at the
Baby unit.
• Check that the units are within range
of each other.
Link light is flashing green
• If you have pressed
to use the
Talk Back feature, the Link light
will flash to indicate one-way
communication between the units.
2292 Baby Monitor 350 UG [4].indd 39 17/06/2014 14:10
Page 40
Help
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
40
• The units are searching for a
communication link.
• Check units are within range of
one another.
• Check both units are turned on.
Link light is red
• The link between your units is
broken. You will also hear an alert
on the Parent unit to let you know
there is no communication between
the units. If this happens, check
that the mains power (or batteries)
is correctly connected and that
the units are within range of one
another. See page 15 for instructions
on linking the units.
Battery low on Parent unit
• Charge the Parent unit batteries by
either putting the Parent unit back
on the charger or plugging directly
into a wall power socket.
• Place Parent unit back on the charger
as frequently as possible or ideally
leave it on the charger to ensure the
batteries remain charged.
• To fully charge the batteries, the
Parent unit should be on charge for
approximately 16 hours if switched
off and 24 hours if switched on to
reach maximum charge.
• To speed up the charging process
turn the Parent unit off when
charging if it is not being used.
Parent unit remains silent or
very quiet
• You may have set the volume
too low, see page 19 to increase
the volume.
• You may have switched Mute on, see
page 19.
You can hear a high pitched noise
• The units might be too close to
each other.
• The volume setting might be too
high, see page 19.
Talk back feature is not working
• Check that the volume is loud enough
at the Baby unit, see page 19.
• Check the units are linked, see
pages 15-16.
2292 Baby Monitor 350 UG [4].indd 40 17/06/2014 14:10
Page 41
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
41General information
Cleaning
Both units have splash resistant grilles and casing.
To clean, wipe with a damp cloth.
Guarantee
Your BT Digital Baby Monitor 350 Lightshow is
guaranteed for a period of 12 months from the
date of purchase.
Subject to the terms listed below, the guarantee
will provide for the repair of, or at BT’s or its agent’s
discretion the option to replace the BT Digital
Baby Monitor 350 Lightshow or any component
thereof, which is identified as faulty or below
standard, or as a result of inferior workmanship of
materials. Products over 28 days old from the date
of purchase may be replaced with a refurbished or
repaired product.
The conditions of this guarantee are:
• The guarantee shall only apply to defects that occur
within the 12 month guarantee period.
• Proof of purchase is required.
• The equipment is returned to BT or its agent as
instructed.
• This guarantee does not cover the batteries and
any faults or defects caused by accidents, misuse,
fair wear and tear, neglect, tampering with the
equipment, or any attempt at adjustment or repair
other than through approved agents.
• This guarantee does not affect your statutory rights.
Within the 12 month guarantee period
Prior to returning your product, please read the
Help section beginning on page 39 or contact the
BT Digital Baby Monitor 350 Lightshow Helpline on
0800 145 6789* for assistance. Additional answers
to Frequently Asked Questions are available from
bt.com/producthelp
In the unlikely event of a defect occurring, the
Helpdesk will issue a Fault Reference Authorisation
(FRA) number and instructions for replacement or
repair. Please note you will need the FRA number
before returning the product. This does not affect
your statutory rights.
Outside of the 12 month guarantee period:
If your product needs repair after the guarantee
period has ended or if you require technical
assistance outside of the 12 month guarantee
period, please call BT’s recommended repair agent,
Discount Communications Ltd on 0800 980 8999
or a local qualified repairer.
Returning your product
If the Helpline is unable to remedy your problem
they will issue a Fault Reference Authorisation
number and ask you to return the product to your
original place of purchase. Where possible, pack the
product in its original packaging. Please remember
to include all parts, including the power supply
adapters and the original batteries. For guarantee
purposes proof of purchase is required so please
keep your receipt.
2292 Baby Monitor 350 UG [4].indd 41 17/06/2014 14:10
Page 42
General information
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
42
Product disposal instructions
The symbol shown here and on the product
means that the product is classed as
Electrical or Electronic Equipment and
should not be disposed with other
household or commercial waste at the
end of its working life.
The Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC) has been put in
place to recycle products using best available
recovery and recycling techniques to minimize the
impact on the environment, treat any hazardous
substances and avoid the increasing landfill.
Product disposal instructions for residential users
When you have no further use for it, please remove
any batteries and dispose of them and the product
as per your local authority’s recycling processes.
For more information please contact your local
authority or the retailer where the product was
purchased.
Product disposal instructions for business users
Business users should contact their suppliers and
check the terms and conditions of the purchase
contract and ensure that this product is not mixed
with other commercial waste for disposal.
R&TTE
This product is intended for use within the UK.
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
1999/5/EC.
Declaration of Conformance
Hereby, BT declares that this BT Digital Baby Monitor
350 Lightshow is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
The Declaration of Conformance for the
BT Digital Baby Monitor 350 Lightshow is available
from bt.com/producthelp
User Guide formats
This document is also available in other formats,
such as Large print, Braille and Audio CD. If you
would like a copy, please call 0800 145 6789*.
2292 Baby Monitor 350 UG [4].indd 42 17/06/2014 14:10
Page 43
2292 Baby Monitor 350 UG [4].indd 43 17/06/2014 14:10
Page 44
Offices worldwide
The services described in this publication are subject to availability
and may be modified from time to time. Services and equipment
are provided subject to British Telecommunications plc’s respec tive
standard conditions of contract. Nothing in this publication forms
any part of any contract.
© British Telecommunications plc 2014.
Registered Office: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Printed in China.
Designed and produced by The Ar t & Design Partnership Ltd.
BT Digital Baby Monitor 350 Lightshow (06/14) Issue 1
For a Better Future
We’re always looking to make our products last longer
and use less power, so we don’t have such a big impact
on the environment.
To find out about what we are doing, visit
bt.com/betterfuture
2292 Baby Monitor 350 UG [4].indd 44 17/06/2014 14:10
Loading...