BT Digital Baby Monitor – Edition 3 – 26.02.04 – 5918
User Guide
BT DIGITAL BABY MONITOR
BT Digital Baby Monitor – Edition 3 – 26.02.04 – 5918
■ Digital sound quality lets you hear your baby breathe,
gurgle, snuffle or cry with complete clarity.
■ Wireless range of up to 300m outdoors and up to 50m
indoors (in ideal conditions) - giving you the freedom to
move around with clear reception and no interference
from other baby monitors.
■ Link light provides continuous confidence that the Parent
Unit is receiving a signal from the Baby Unit and will alert
you if the link is lost.
■ Sound sensitive lights, so you can turn the volume down
and still know when your baby stirs.
■ Talk Back feature lets you instantly reassure and calm
your baby.
■ Nightlight for a soft, comforting glow.
■ Mains or battery operation.
This User Guide provides you with all
the information you need to get the
most from your BT Digital Baby Monitor.
Please read this guide carefully and
keep it for future reference.
Need help?
If you have any problems setting up or using your
BT Digital Baby Monitor (or would like additional or
replacement batteries), call the BT Baby Monitor Helpline
08702 40 47 45. Lines open 9.00am –5.30pm, Monday
to Friday and 9.00am –2.00pm on Saturday.
Alternatively, you may also find the answer in ‘Help’ at
the back of this guide.
Got everything?
■ Baby Unit
■ Baby Unit mains power
adapter
■ Parent Unit
■ 2 x AA rechargeable
batteries for Parent Unit
■ Parent Unit charger
■ Belt clip for Parent Unit
Welcome…
to your BT Digital Baby Monitor
BT Digital Baby Monitor – Edition 3 – 26.02.04 – 5918
3In this guide
Setting up
Parent Unit . . . . . . . . . . . . . . . . . . . .4
Baby Unit . . . . . . . . . . . . . . . . . . . . .5
Check the connection . . . . . . . . . . . . .5
Getting to know your Parent Unit . . .6
Getting to know your Baby Unit . . . .7
Using the Baby Unit
Switching on/off . . . . . . . . . . . . . . . .8
Adjust volume . . . . . . . . . . . . . . . . . .8
Talk Back . . . . . . . . . . . . . . . . . . . . . .8
Paging . . . . . . . . . . . . . . . . . . . . . . .9
Night light . . . . . . . . . . . . . . . . . . . . .9
Sound lights . . . . . . . . . . . . . . . . . . .9
Sensitivity . . . . . . . . . . . . . . . . . . . . .9
Help . . . . . . . . . . . . . . . . . . . . . . . . .10
General information
Cleaning . . . . . . . . . . . . . . . . . . . . . .11
Guarantee . . . . . . . . . . . . . . . . . . . . .11
R&TTE . . . . . . . . . . . . . . . . . . . . . . .11
Declaration of Conformance . . . . . . . .11
IMPORTANT
■ Your BT Digital Baby Monitor is
designed to be an aid and should not
be used as a substitute for responsible
and proper adult supervision.
■ Make sure the Baby Unit and mains
adapter cable are kept out of reach of
your baby – at least one metre away.
■ Never place the Baby Unit inside your
baby’s cot, bed or playpen.
■ Never cover your Parent or Baby Units
(e.g. with clothes, towels or blankets).
■ Never use or place your Parent or Baby
Units in moist places or near water.
■ If travelling abroad, make sure that the
voltage shown on the mains power
adapter corresponds to the local mains
power before connecting to the power
supply.
■ Always dispose of batteries in
accordance with applicable waste
disposal regulations, never in your
household rubbish.
Parent Unit
1. Plug the charger for the Parent Unit into the mains
power socket.
2. Remove the battery compartment cover and insert 2 x AA
rechargeable batteries into the battery compartment on
the Parent Unit and replace the battery compartment
cover as shown. You should always ensure you have
inserted batteries in the Parent Unit.
a.
b.
c.
3. Slot the Parent Unit into the charger, the red charging
light comes on. Charge the batteries for 16 hours before
switching on the Parent Unit.
4. For added convenience, attach the belt clip.
Setting up4
2
1
2
2
1
Battery performance
The Parent Unit gives up to 16
hours continuous performance on
fully charged batteries.
Please note however, that new
batteries do not reach full capacity
until they have been in normal use
for several days.
Running rechargeable batteries
right down at least once a week will
help them last as long as possible.
The charge capacity of rechargeable
batteries will reduce with time as
they wear out, so reducing the
performance time of the Parent
Unit. Eventually they will need to
be replaced. New batteries can be
obtained from the BT Baby
Monitor Helpline 08702 40 47 45.
Battery low warning
When the batteries are low you will
hear an alert warning tone every
minute at the Parent Unit and the
battery low light will come on.
To silence the alert, press any button
on the Parent Unit. You will have 15
minutes of use before the batteries
become completely discharged.
If the batteries are completely flat
the Parent Unit will switch off and
the link light on the Baby Unit will
turn red.
WARNING
Never use non-rechargeable
batteries in your Parent Unit.
Use only the recommended type –
2 x AA rechargeable (1300mAh
NiMH) batteries – using other
types could permanently damage
your unit.
The Parent Unit can still be used
when it is in the charger.
To remove the
belt clip
Push on the
belt clip tab
with your
thumb (1), then
lift the belt clip
off (2).
1
!
Baby Unit
Once your Parent Unit has been fully charged:
1. Plug the mains power
cable into the socket
marked on the side
of the Baby Unit.
Connect the other end
to the mains power and
switch on.
Using batteries
Your Baby Unit also works on battery power, so that you
can use it even when you are not near to a mains power
socket or during a power cut.
1. Using your finger or a coin,
turn the battery lock on the
back of the Baby Unit anticlockwise so the groove is
horizontal then lift off the
cover.
2. Insert 4 x AA Alkaline
batteries (not supplied)
as shown.
3. Replace the battery cover,
turning the battery lock
into the vertical position
again to lock it.
Check the connection
When both Units are switched on, the green link lights
on both Units will come on.
If the link between the Units is broken at any time, the
link lights on both units will turn red and flash slowly.
At the Parent Unit, you will also hear an alert signal
(3 beeps) to warn you that there is no communication
between the Units.
If this happens, check that the mains power is plugged in
and switched on at the Baby Unit. Also check that the
Units are within range of one another.
5Setting up
BT Digital Baby Monitor – Edition 3 – 26.02.04 – 5918
WARNING
Use only the mains power adapter
supplied. Using an incorrect
adapter may permanently damage
the Baby Monitor.
Please note
The Baby Unit will only work from
the batteries if the mains power is
off or disconnected.
Battery performance
The recommended batteries are
4 x AA Alkaline (2500mAh).
With new batteries, your Baby Unit
will give up to 24 hours continuous
performance with the night lights
switched off. This will be less if the
lights are switched on.
When the Baby Unit is not being
used and is disconnected from the
mains power, you should ensure
you remove the batteries. This will
prevent the batteries discharging.
In the event of power failure, when
the power is restored all your
settings will remain unchanged.
LockUnlock
!
BT Digital Baby Monitor – Edition 3 – 26.02.04 – 5918
From the Parent Unit you can listen to your baby and
operate the Baby Unit by remote control.
C
h
a
r
g
i
n
g
Volume + - / Up and Down
Set volume.
Scroll through the menu
options.
Talk
Press to talk to your baby.
Link light
Green when the Baby and
Parent Units are linked.
Flashes green when you press
Talk or if searching for a link.
Red if the Parent and Baby
Units are not linked.
Power on/off
Press and hold to switch the
power on or off.
Sound sensitive lights
Green and then red lights
indicate the noise level in
your baby’s room.
Sensitivity
Press to change the
sensitivity level.
Battery Low light
Flashes when the batteries
are low.
Charge light
The red light comes on when the
Parent Unit is charging.
Getting to know your Parent Unit6
BT Digital Baby Monitor – Edition 3 – 26.02.04 – 5918
7Getting to know your Baby Unit
Night light on/off
Press to switch the starry
night lights on and off.
Link light
Green when the Baby and
Parent Units are linked.
Flashes green when you
press Talk or if searching
for a link.
Red if the Parent and
Baby Units are not linked.
Power on/off
Press and hold to switch
the power on or off.
Power socket
Microphone
Allows you to hear your
baby via the parent unit.
Page
Press to page the
Parent Unit.
Volume
+
–
Press to adjust the
Talk Back volume.
Battery Low light
Illuminates when
batteries are low.
Battery lock
Child tamper proof lock for the
battery compartment.
Back of Unit
BT Digital Baby Monitor
BT Digital Baby Monitor – Edition 3 – 26.02.04 – 5918
Switching on/off
On both Parent and Baby Units
1. To switch On, press until the link light comes on and
the display activates. At the Parent Unit the red and
green sound sensitive lights illuminate briefly to confirm
they are working.
Or,
To switch Off, press until you hear a beep.
Adjust volume
There are 5 volume levels on each Unit and there is also
an Off setting on the Parent Unit. You cannot switch the
volume off on the Baby Unit.
At the Parent or Baby Unit:
1. Press Volume to increase or Volume to decrease
the volume.
Changing the volume setting on the Baby Unit affects
the volume when you use the Talk Back feature.
Talk Back
You can use the Talk Back feature to comfort and
reassure your baby.
1. Press and hold on the Parent Unit to speak
to baby.
The green link lights on both Units flash.
2. Release to hear your baby again.
Change Talk Back volume
The Baby Unit has 1–5 volume levels.
1. Press or on the Baby Unit to increase or
decrease the volume.
Using the Baby Monitor8
The green link lights flash to
indicate one way communication.
Helpline
If you have any problems using
your BT Digital Baby Monitor, call
08702 40 47 45 or email
helpline@btbabymonitors.co.uk.
Helpline open 9.00am –5.30pm,
Monday to Friday and
9.00am–2.00pm on Saturday.
Whilst using Talk Back you will not
be able to hear your baby until you
release the button.
If you place the Parent and Baby
Units too close together you will
hear a high pitched noise, this is
normal. The units are designed to
be located at a distance from one
another, e.g. in separate rooms.
9Using the Baby Unit
BT Digital Baby Monitor – Edition 3 – 26.02.04 – 5918
Paging
You can use the button on the Baby Unit to find
the Parent Unit or alert another member of the family via
the intercom.
1. Press . The Parent Unit will automatically reset
to mid volume and the paging alert will sound.
2. To stop the Page alert, press any button on the Parent
Unit, or press again on the Baby Unit.
Night light
The night light provides a soft and comforting glow for
your baby and allows you to check on baby without
having to turn on the main room light.
At the Baby Unit:
1. Press the button on the top of the Baby Unit.
Press again to switch off.
Sound lights
The sound lights are the green and red lights located at
the top of the Parent Unit which illuminate according to
the level of sound in the baby’s room.
This means you can turn the volume off at the Parent
Unit and still monitor your baby using the sound lights.
If the Parent Unit senses increased noise levels in your
baby’s room, the 2nd red light will illuminate and you will
hear an alert tone. To stop the alert tone, press any
button on the Parent Unit.
Sensitivity
You can change the level of sensitivity to suit your baby.
For example, if your baby is a particularly quiet sleeper,
you can increase the sensitivity levels so that you are
sure to hear if baby disturbs or becomes uncomfortable.
1. Press .
2. Scroll or to select the sensitivity level you require –
level 1 for low sensitivity, or level 5 for high sensitivity.
Please note
If you set the sensitivity level too
low, only louder sounds in the
baby’s room will be picked up and
communicated back to you via the
Parent Unit. The Unit will not pick
up quieter background noises.
Level 1 – 1 green light
Level 2 – 2 green lights
Level 3 – 3 green lights
Level 4 – 4 green lights
Level 5 – 5 green lights
Please note
If you press once you will
stop the Paging alert, if you press
twice you will open the voice
link for you to talk to your baby
and your baby will also hear any
background noise you make.
The sound alert cannot be set to
off. You can set the volume to the
lowest level (level 1) if you do not
want the sound alert to go off.
BT Digital Baby Monitor – Edition 3 – 26.02.04 – 5918
Power lights do not come on
■ If using the mains power adapters make sure they are
plugged in and switched on.
■ If using batteries, check they are correctly installed and
not discharged.
Link light does not come on
■ Check that both the Baby and Parent Units are switched
on, see page 8.
■ If using batteries check that they are correctly installed
and that they are not discharged.
Link light is flashing green
■ If you have pressed to use the Talk back feature,
the link light will flash to indicate one-way
communication between the units.
■ The Units are searching for a communication link.
Check they are within range of one another and that the
mains power (or batteries) are properly connected.
Link light is red
■ The link between your Units is broken. You will also hear
an alert to let you know there is no communication
between the Units. If this happens, check that the mains
power (or batteries) is correctly connected and that the
Units are within range of one another.
Parent Unit remains silent or very quiet
■ The sensitivity setting may be too low, see page 9.
■ You may have set the volume too low, see page 8.
You can hear a high pitched noise
■ The Units are too close to each other, or the volume
setting is too high, see page 8.
Talk back feature is not working
■ Check that the volume is loud enough at the Baby Unit,
see page 8.
Help10
Helpline
If you have any problems using
your BT Digital Baby Monitor,
call 08702 40 47 45 or email
helpline@btbabymonitors.co.uk.
Helpline open 9.00am –5.30pm,
Monday to Friday and
9.00am–2.00pm on Saturday.
BT Digital Baby Monitor – Edition 3 – 26.02.04 – 5918
Cleaning
Both Units have splash resistant grilles and casing.
To clean, wipe with a damp cloth.
Guarantee
Your BT Baby Monitor is guaranteed for a period of
12 months from the date of purchase.
Subject to the terms listed below, the guarantee will
provide for the repair of, or at BT’s or its agent’s
discretion the option to replace the Baby Monitor or
any component thereof, which is identified as faulty or
below standard, or as a result of inferior workmanship
of materials. Products over 28 days old from the date
of purchase may be replaced with a refurbished or
repaired product.
Within the 12 month guarantee period:
If you experience difficulty using the product, prior to
returning it, please read the Help section on page 10 and
if necessary call the BT Baby Monitor Helpline on 08702
40 47 45. They will advise you what to do should you
need to return your product.
R&TTE
This product is intended for use within the UK.
This equipment complies with the essential requirements
for the Radio Equipment and Telecommunications
Terminal Equipment Directive 1999/5/EC.
Declaration of Conformance
The Declaration of Conformance for the BT Digital Baby
Monitor can be obtained by calling the BT Baby Monitor
Helpline on 08702 40 47 45 or by emailing
helpline@btbabymonitors.co.uk.
11General information
The conditions of this
guarantee are:
The guarantee shall only apply to
defects that occur within the 12
month guarantee period.
Proof of purchase is required.
The equipment is returned to BT
or its agent as instructed.
This guarantee does not cover
the batteries and any faults or
defects caused by accidents,
misuse, fair wear and tear,
neglect, tampering with the
equipment, or any attempt at
adjustment or repair other than
through approved agents.
This guarantee does not affect
your statutory rights.
BT Digital Baby Monitor – Edition 3 – 26.02.04 – 5918
Visit us at www.bt.com
Offices worldwide
The telecommunications services described in this publication
are subject to availability and may be modified from time to time.
Services and equipment are provided subject to British
Telecommunications plc’s respective standard conditions of
contract. Nothing in this publication forms any part of any contract.
© British Telecommunications plc 2004.
Registered Office: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
BT Digital Baby Monitor (02/04) 3
Designed and produced by The Art & Design Partnership Ltd.
Printed in China.
European Registration Design No. 000109749.
0681
Loading...