BT BT DIVERSE 5400 User Manual

Page 1

User Guide

BT DIVERSE 5400

ADDITIONAL HANDSET AND CHARGER

This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services.

FOR SMS

TEXT MESSAGING

YOU MUST SUBSCRIBE

TO A CALLER DISPLAY SERVICE

AND YOU MUST NOT WITHHOLD

YOUR TELEPHONE NUMBER.

A QUARTERLY FEE IS PAYABLE.

5201 Diverse5400 u_g [3] 29/8/03 5:40 PM Page 1 (Black plate)

Page 2

Please open this page for an ‘At a glance’ guide to your BT Diverse 5400.

5201 Diverse 5400 foldout [3] 29/8/03 5:57 PM Page 2 (Black plate)

Page 3

At a glance

Microphone

Hash/Keyguard

Hold down to switch the keypad guard on and off.

Extra Directory

Used to store an additional 10 names and numbers.

Red phone

Press to end a call, return the display to idle or turn the power on and off.

Display

Displays the status of your handset.

Green phone

Used to make and answer calls.

Switches from handsfree mode back to handset.

Control button

Allows voice dialling.

Lets you display options from the menus.

INT

Used to make internal calls and access the call barring options.

Opens main menu

Recall

Press for use with switchboards and certain Network Ser vices or press and hold to enter a pause.

Calls list

Lets you access your lists – calls, SMS and voice mail.

Keypad

Display buttons

Lets you access the functions displayed on the screen.

Star/bell

Switches the handset ringer on and off.

When writing text messages, switches between capitals, lower case letters and number options

One button

As well as being the number one button hold down to access your Voice Mail service.

Handsfree

Use to answer calls or make a call in handsfree mode.

directory

Dial from Calls list to display Calls List to display the number you want .

Adjust handsfree

Display shows Volume to decrease/increase volume

volume whilst in handsfree mode

Adjust earpiece volume whilst display shows Volume to decrease/increase volume . making a call

Make internal call then to select handset .

Call all handsets to Call All .

Transfer call to

then to select handset . When user answers, press .

another handset

Put caller on hold

then to select handset . When finished press .

while you make

Back is selected, press .

an internal call

Set date and time to display Calender/Clock to display Date/Time

enter date enter time e to select 12hr or 24hr Time mode .

INT

OK OK

Save

Menu Save

Save

Page

5201 Diverse5400 u_g [3] 29/8/03 5:40 PM Page 7 (Black plate)

Page 10

BT Diverse Helpline – 08457 908 070

Quick guide to handset display icons

Shows the status of the handset battery.

In range signal strength.

Redial, lists up to the last 10 dialled numbers.

Opens the SMS menu.

Flashes to indicated new messages (e.g. Calls, SMS or Answer machine).

Remains on, when you have old messages stored.

For calling other handsets.

Opens the menu.

Scroll through the menu.

Confirms function displayed.

Scroll left and right, when entering numbers or messages.

Deletes numbers/characters (from right to left).

Ringer off.

Keypad locked.

Crescendo tone.

Answer machine (shows when used with the BT Diverse 5450).

INT

SMS



5201 Diverse5400 u_g [3] 29/8/03 5:40 PM Page 8 (Black plate)

Page 11

BT Diverse Helpline – 08457 908 070

INTRODUCTION

If anything is missing, please contact your place of purchase immediately.

One BT Diverse 5400 charger

One BT Diverse 5400 handset

One power supply for the charger

Two AAA rechargeable batteries

One belt clip

Battery compartment cover

Introduction

Unpacking your BT Diverse 5400

For guarantee purposes proof of purchase is required so please keep your receipt.

For your records

Date of purchase:

Place of purchase:

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 9 (Black plate)

INT M

DEF

ABC

GHI

MNO

JKL

PQRS

WXYZ

TUV

Page 12

BT Diverse Helpline – 08457 908 070

SAFETY INFORMATION

Safety information

General

Only use the power supply included with the product. Using an unauthorised power supply will invalidate your guarantee and may damage the telephone. Power supply number is C39280 -Z4- C478.

For the handset use only AAA 1.2V Nickel Metal Hydride (NiMH) rechargeable batteries with a minimum capacity of 700 mAh. Never use other batteries or conventional alkaline batteries. They could lead to a short circuit or destroy the battery casing. Batteries and accessories are available from www.withandwithoutwires.com or call 0870 240 5522.

If the Keyguard is switched on, it is NOT possible to make calls, including emergency numbers (999/112).

Do not open the charger or handset (other than to change batteries). This could expose you to high voltages or other risks.

Radio signals transmitted between the handset and base may cause interference to hearing aids.

This product should not be used near emergency/intensive care medical equipment and should not be used by people with pacemakers.

Never dispose of batteries in a fire. There is a serious risk of explosion and/or the release of highly toxic chemicals.

Cleaning

Simply clean the handset and charger with a damp (not wet) cloth, or an anti-static wipe. Never use household polish as this will damage the product. Never use a dry cloth as this may cause a static shock.

Environmental

Do not expose to direct sunlight.

The product may heat up when the batteries are being recharged. This is normal. However, we recommend that you do not place the product on antique/veneered wood to avoid damage.

Do not stand your product on carpets or other surfaces which generate fibres, or place it in locations preventing the free flow of air over its surfaces.

Do not submerge any part of your product in water and do not use it in damp or humid conditions, such as bathrooms.

Do not expose your product to fire, explosive or other hazardous conditions.

There is a slight chance that your phone could be damaged by an electrical storm. We recommend that you unplug the power and telephone line cord during an electrical storm.

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 10 (Black plate)

Page 13

BT Diverse Helpline – 08457 908 070

SETTING UP

Plan the location

Situate your product close enough to a mains power socket so that the cable will reach.

Make sure it is at least 1 metre away from other electrical products to avoid interference.

Do not situate the product in the bathroom or other humid areas.

IMPORTANT

Please note that your handset is NOT registered to a base station. The BT Diverse 5400 handset will be easily registered once you complete the steps 1 to 3 below.

2 Plug the power supply unit

into the wall socket

Setting up

1 Connect the charger

Plug the power supply cable into the power socket at the back of your charger.

3 Registering and charging

the handset

The display is protected by a plastic film. You can remove this protective plastic film from the display.

SMS

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 11 (Black plate)

Page 14

BT Diverse Helpline – 08457 908 070

SETTING UP

Insert the two batteries supplied, as indicated inside the battery compartment and slide the battery compartment cover shut.

Insert the batteries Registering the handset

If the icons on the display

flash continuously...

It means that the handset is not registered with the base station.

Ensure you have correctly carried out step 3 above. If the product is still not registered see Registering Manually on page 13.

All additional handsets you purchase will need to be individually registered with the base station before they will work.

The battery cover may be found in the packaging with the batteries.

WARNING

Under no circumstances should non-rechargeable batteries be used. Using incorrect batteries will invalidate your guarantee and may damage the telephone.

To register your handset to a BT Diverse 5410 or 5450 base station, place it in the main BT Diverse 5400 base station with the display facing upward. After approx. one minute, the handset's internal number is displayed (e.g. 2). Successful registration is signalled by a confirmation tone.

Replace the newly registered handset into the charger and leave to charge for approximately 16 hours. The charging status icon flashes on the handset to indicate that the batteries are being charged.

When the handset is registered the display will show:

SMS

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 12 (Black plate)

Page 15

BT Diverse Helpline – 08457 908 070

SETTING UP

To manually register a BT Diverse 5400 handset to another base station.

If you want to register your handset to another base station you will need to manually register it.

On the handset to be registered:

Press MENU.

Scroll DOWN to

H/set Settings

Press OK.

Scroll DOWN to

Press OK.

Select the base.

Press OK

Enter the system PIN. (Original setting

0000

Press OK.

If the base station is a BT Diverse 5400, press the PAGE button until you hear a beep – after approximately three seconds.

After approximately one minute the handset will display its internal number. The handset is now registered and the handset display will return to the idle screen.

If the base is not a 5400 you will need to follow the user guide for the base station you are registering the 5400 handset to.

PAGE

Note

To make internal calls or page handsets, see page 19.

To de-register a handset

Press the INT button. Display lists the registered handsets.

Press UP/DOWN to highlight the handset you want to de-register.

Press MENU.

Scroll DOWN to

De-reg H/set. No

Press OK.

Enter the system PIN. (Original setting

0000

Press OK to confirm de-registration.

Press RED PHONE to return to the idle display.

INT M

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 13 (Black plate)

Page 16

BT Diverse Helpline – 08457 908 070

SETTING UP

Out of range?

If you go out of range of a base station for a long time while your handset is switched ON, it may take more than 20 minutes to ‘find’ the base station again when you come back within range. However, by simply switching the handset OFF for a moment, then ON again, it will find the base station within a few seconds.

Battery level icons

When the batteries are almost flat a beep sounds and the display shows the empty battery icon. You will need to recharge your handset before you can use it. The various states of charge are shown below:

Batteries fully charged

Batteries at 66%

Batteries at 33%

Batteries empty

Battery performance

Batteries and case may become warm during charging. This is normal.

Under ideal conditions, the handset batteries should give about 13 hours talktime or 170 hours standby time on a single charge. However, new NiMH batteries do not reach their full capacity until they have been in normal use for several days.

The charge capacity of rechargeable batteries will reduce with time as they wear out, so reducing the talk/standby time of the handset. Eventually they will need to be replaced. New batteries are available from

www.withandwithoutwires.com

or call 0870 240 5522.

If you replace the handset batteries with ones that have been fully charged, the battery indicator will not show full until the next charge cycle has been completed. Charge the handset until the batteries register full again. From

then on the display will be correct.

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 14 (Black plate)

Page 17

BT Diverse Helpline – 08457 908 070

SETTING UP

Your BT Diverse 5400 is now

ready for use.

SSlloott

5 Setting the date and time

Press the RIGHT options button.

Press the DOWN navigation button until the display shows

Calender/Clock

Press the OK options button.

Press DOWN until display shows

Date/Time

Press the OK options button.

Enter the day/month/year, e.g.

05 10 03

for 5th October

2003.

Press DOWN to scroll to

Time

Enter the time – hours/ minutes. E.g.

0925

for 9.25am.

Press DOWN to scroll to

Time Mode

Press LEFT/RIGHT to select

12hr

24hr clock

Press SAVE to confirm. Display shows

Entry Saved

Press RED PHONE to return to the idle display.

4 To fit the belt clip

Fit the belt clip onto the back of the handset.

SAVE

Note

If you subscribe to a Caller Display service the time and date will be set with the first incoming call. However, the year setting will have to be changed manually. See opposite.

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 15 (Black plate)

Page 18

BT Diverse Helpline – 08457 908 070

USING THE TELEPHONE

Using the telephone

Control button

The control button lets you open menus and gives you shortcuts to different functions such as Voice Dialling.

Control button functions

In idle mode In lists and menus When adding entries

Voice dialling Scroll up Move cursor one (press and hold) line up

Open directory Scroll down Move cursor one

line down

Open main menu Confirm selection Move cursor to

the right

Open handset list Scroll back one level Move cursor to

in the menu the left

Display buttons

These are the two buttons directly underneath the display. The functions vary according to how you are using the phone.

Display button functions

The display shows the current function is shown directly above each button.

Icon Function

Lets you access the last 10 numbers dialled.

Confirms menu function or entry.

SMS

Opens SMS text menu

Deletes characters from right to left

Takes you one menu level back.

Display buttons

Control button

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 16 (Black plate)

INT M

➤

Page 19

BT Diverse Helpline – 08457 908 070

USING THE TELEPHONE

To make an external call

Ensure the handset is switched on.

Press the GREEN PHONE button. You hear the dial tone.

Dial the number.

Preparatory dialling

Dial the number first.

If you make a mistake, press the



C display button to

remove any incorrect digits.

Press the GREEN PHONE button to dial the number.

Making and ending calls

Note

To exit a menu at any time, press the RED PHONE button. This will take you back one step. Keep pressing the RED PHONE button to return to the idle screen.

To switch the handset power on and off

Press and hold the RED PHONE button to switch the

handset off.

Press and hold the RED PHONE button to switch the handset on again.



For example,

To adjust the handsfree loudspeaker volume

Press RIGHT to open the main menu.

Press DOWN to scroll to

Audio Settings

Press RIGHT or the OK display button.

Confirm Handset Volume by pressing RIGHT or the OK display button.

Press LEFT/RIGHT to adjust the volume.

Press SAVE to confirm.

Press RED PHONE to return to the idle display.

Alternatively:

Press the HANDSFREE button twice.

Press LEFT/RIGHT to adjust the volume.

Press SAVE to confirm.

Press RED PHONE to return to the idle display.

SAVE

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 17 (Black plate)

Page 20

BT Diverse Helpline – 08457 908 070

USING THE TELEPHONE

To receive an external call

Press the GREEN PHONE button to answer the call.

Press the Accept display button.

If the handset is on the base, simply lift it up and speak. You do not need to press the GREEN PHONE button.

This is called Autotalk. You can switch autotalk off so you always have to press the GREEN PHONE button to answer a call, see page 50.

To make a handsfree call

Dial the number.

Press the HANDSFREE button. The loudspeaker is switched on and you hear the number being dialled.

To switch back to using the handset and any time, press the GREEN PHONE button.

Handsfree

Handsfree allows you to talk to your caller without holding the handset and enables other people in the room to listen to the conversation. Your hands are left free, for example, to take notes.

To adjust the handsfree volume whilst in handsfree mode

Press the LOUDSPEAKER button.

Press LEFT/RIGHT to increase or decrease the volume.

Press the SAVE display button to save the new volume setting.

SAVE

Note

You can test the handsfree function by dialling the BT speaking clock on 123.

To end a call

Press the RED PHONE button.

Call timer

Your handset automatically times the duration of all external calls, showing it on the display during your call and for a few seconds after it is finished.

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 18 (Black plate)

Page 21

BT Diverse Helpline – 08457 908 070

USING THE TELEPHONE

Note

If you need to replace the handset in the base station during a call, for example, because the battery is flat, hold down the HANDSFREE button.

To switch to handsfree during a call

You can switch to handsfree at any time during a call.

Press the HANDSFREE button. The call is transferred to the loudspeaker.

Press and switch back to private conversation again by pressing the GREEN PHONE button.

To answer a call in handsfree

When the phone rings:

Press the HANDSFREE button.

To switch secrecy on and off

During a call:

Press LEFT. The microphone is switched off. Your caller hears a melody.

Press RETURN to speak to your caller again

Secrecy

During a call, you can switch off your handset’s microphone so your caller cannot hear you. They will hear a melody instead so you can talk to someone else in the room.

Paging and internal calls

You can alert a handset user that they are wanted, or locate a missing handset.

If you have multiple handsets registered to the base you can make internal calls between handsets.

To make an internal call

Press the LEFT/INT button. A list of all the handsets that are registered to the base are listed. You can select any of them.

Your handset is identified by

INT 1 <

INT M

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 19 (Black plate)

➤

Page 22

BT Diverse Helpline – 08457 908 070

USING THE TELEPHONE

Press UP/DOWN to scroll to the handset you want to call and press the GREEN PHONE button.

Press the handset number you want to call on the keypad.

Select Call All to ring all the handsets registered

to the base and press the GREEN PHONE button. Your call will be taken by the first handset user to answer.

Call All

Note

You can also page all handsets by pressing the PAGE button on the base station.

Press UP/DOWN to scroll to the handset you want to call or

Call all handsets

Press the GREEN PHONE button to call. When the other handset answer can tell them you are transferring the call.

Press the RED PHONE button to put the call through.

To transfer an external call between handsets

You can forward an external call to another handset registered to the base.

During an external call:

Press the LEFT/INT button to display a list of handsets. Your caller is put on hold and hears musical tones.

INT M

Note

You can also put the call through without announcing it by immediately pressing the RED PHONE button after dialling the other handset.

To put an external call on hold while you make an internal call

This enables you to ask another handset user a question and then get straight back to your caller.

During a call:

Press the LEFT/INT button to display a list of handsets. Your caller is put on hold and hears musical tones.

Press UP/DOWN to scroll to the handset you want to call.

Press OK to call.

INT M

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 20 (Black plate)

Page 23

BT Diverse Helpline – 08457 908 070

USING THE TELEPHONE

Press the handset number you want to call on the keypad to the base and press the GREEN PHONE button.

You can now speak with the other handset user.

To return to your external call:

Press END. You are re-connected.

END

Three-way conversation

While you are talking to an external caller, another handset user can join in.

While you are on an external call:

The other handset user’s screen shows

In use

Press the GREEN PHONE button.

Press the RED PHONE to exit the conversation.

To answer a waiting call during an internal call

If you are making an internal call and hear the Call Waiting tone you can immediately take the incoming call.

Press the ACCEPT button to end your internal call and take the new call.

Press the REJECT button to reject

Call Waiting

. The Call Waiting tone is switched off and you can carr y on with your call to the other handset user.

Note

To use the Three-way conversation feature, make sure the Listening In setting is switched ON, see opposite.

To switch the Listening In function on/off

Press RIGHT to open the menu.

Press DOWN to scroll to

Base

Settings

Press OK.

Press DOWN to scroll to

Add.

Features

Press OK.

Press DOWN to scroll to

Listening In

Press OK.

Enter the System PIN (original setting

0000

)

REJECT

OKOK

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 21 (Black plate)

Page 24

BT Diverse Helpline – 08457 908 070

USING THE TELEPHONE

Press the OK display button.

Enter the telephone number.

Scroll DOWN to

Enter Name

Enter the name.

Entering names:

Enter the name using the letters on the keypad. For example, to enter the name TOM:

Press the 8 button,

appears

on the display.

Press the 6 button three times until the display shows O.

Then press the 6 button to display

For the full character map, see page 23.

Press MENU then

Save Entry

is displayed.

Press the OK display button.

To enter their birthday:

Scroll down to

Annivers: Date

Enter the person’s birthday

Press the OK display button.

Press SAVE to confirm.

Press RED PHONE to return to the idle display.

To store an entry in the main directory

Press the DIRECTORY button. Display shows

New Entry

Using the main directory and extra directory

You can store a total of up to 200 names and numbers, in the main directory, SMS directory and Extra directory depending on the length of each entry.

You can enter up to 32 digits and up to 16 letters.

The Extra directory – opened by pressing the button on the keypad – gives you extra quick access to your 9 most important and/or frequently used numbers.

You can create a main directory, SMS directory and Extra directory just for your handset. You can also copy each directory to other handsets registered to the same base station, see page 29.

TUV

MNO6MNO

Press OK.

Listening In

with a

indicates it is switched on.

Press OK again to switch off, the disappears.

Press RED PHONE to return to the idle display.

SAVE

Note

Please refer to the section ‘Add Birthday Alert’, page 25.

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 22 (Black plate)

Page 25

BT Diverse Helpline – 08457 908 070

USING THE TELEPHONE

Note

The first letter of each name, and the first letter after a punctuation mark are automatically shown as capitals. Letters are always added to the left of the cursor.

Press to switch between capitals and lower case.

Press to move the cursor.

Press to delete from right to left.

Press 1 to enter a blank space.



1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th 11th 12th 13th 14th

press press press press press press press press press press press press press press

1 € £$¥

abc2дбавгз

def3ëéèê

ghi4ïíìî

jkl5

mn o 6 ö ñó òô õ

pqr s7ß

tuv8üúùû

wxyz 9 ÿ ´yæøå

a➔A ✱ /( )<=>%

.,?!0+-:¿¡“‘;–

#@\ &§

WXYZ

TUV

PQRS

MNO

JKL

GHI

DEF

ABC

Character map

These are the characters you can use when storing a directory entry.

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 23 (Black plate)

Page 26

BT Diverse Helpline – 08457 908 070

USING THE TELEPHONE

To dial a name and number in the main directory

Press DIRECTORY to open the list.

Scroll DOWN to the entr y you want

Enter the first letter of the name you want, e.g. for Emma, press 3 twice to search for names beginning with E

Press the GREEN PHONE button. The number is dialled.

To view entries in the main directory

Press the DIRECTORY button.

Press UP or DOWN to scroll to the entry name you want.

Press VIEW to see the entr y details.

Press RED PHONE to return to the idle display.

To edit entries in the main directory

Press the DIRECTORY button.

Press UP or DOWN to scroll to the entry name you want.

Press the VIEW display button to see the entry details.

Press the EDIT display button.

Edit the number, if necessary using the LEFT/RIGHT and DELETE buttons.

Scroll DOWN to edit the name.

If the name is correct, press the MENU display button.

Save Entry

is displayed

Press OK to confirm.

If you wish to edit the name, enter a new name now using the LEFT/RIGHT and DELETE buttons.

If the name is correct, press the MENU display button.

Save Entry

is displayed

Press OK to confirm.

VIEW

EDIT



5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 24 (Black plate)

Page 27

BT Diverse Helpline – 08457 908 070

USING THE TELEPHONE

To add a birthday alert to an entry

You can save birthdays in the directory along with a reminder alarm to help you remember them. When the birthday date and time you have set arrives, the handset will automatically alert you.

Press the DIRECTORY button.

Scroll UP or DOWN to scroll to the entry name you want.

Press VIEW to see the entr y details.

Press EDIT

Scroll DOWN to

Annivers:

Press RIGHT to open the Anniversary section.

Enter the date and time you want for the alarm call.

Then select whether you want to be reminded by a Visual or Ringer alert.

Press the OK display button.

Press SAVE to confirm.

Press RED PHONE to return to the idle display.

To delete an entry from the main directory

Press the DIRECTORY button.

Press UP or DOWN to scroll to the entry name you want.

Press RIGHT.

Press DOWN to scroll to

Delete Entry

Press the OK display button. Display shows

Entry has been

deleted

You can either delete another entry, or

Press RED PHONE to return to the idle display.

VIEW

EDIT

SAVE

Birthday alert signal

A birthday alarm is signalled by showing the directory entry and icon. If you have set a ringer alert, the melody selected is played.

To stop a birthday alert

When the alert rings or the visual alert is displayed

Press the OFF display button.

Press SMS to send a text message to the person.

OFF

SMS

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 25 (Black plate)

Page 28

BT Diverse Helpline – 08457 908 070

USING THE TELEPHONE

To delete the entire main directory

Press the DIRECTORY button.

Press UP or DOWN to scroll to the entry name you want.

Press RIGHT.

Press DOWN to scroll to

Delete List

Press the OK display button. Display asks

Delete all

entries?

Press YES to confirm or NO to exit.

Scroll DOWN to Enter Key.

Press LEFT/RIGHT to select a button number,

or 2-9under

which to store the entry.

Press SAVE to confirm.

Add another entry or press RED PHONE to return to the idle display.

Extra directory

This is an additional directory where you can store up to 10 of your most important and/or frequently dialled names and numbers.

SAVE

To store an entry in the Extra directory

Press the EXTRA DIR button. Display shows

New Entry

Press the OK display button.

Enter the telephone number.

Scroll DOWN to Enter Name.

Enter the name.

To dial from the Extra directory

Press and hold the single number assigned to the Extra directory entry you want. The phone number is displayed.

Press the GREEN PHONE button. The number is dialled.

Press the EXTRA DIRECTORY button to open the list.

Scroll DOWN to the entr y you want

Press the GREEN PHONE button. The number is dialled.

YES

Note

To view/edit or delete entries from the Extra directory, press the button and then follow instructions on pages 24 and 25.

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 26 (Black plate)

Page 29

BT Diverse Helpline – 08457 908 070

USING THE TELEPHONE

To delete the entire Extra directory

Press the DIRECTORY button.

Press UP or DOWN to scroll to the entry name you want.

Press RIGHT.

Press DOWN to scroll to

Delete List

Press the OK display button. Display asks

Delete all

entries?

Press YES to confirm or NO to exit.

YES

Note

This Extra directory does not “name and number match” when used with Caller Display.

VIP

To mark a directory/Extra directory entry as a VIP.

You can select particularly important entries as VIPs. You can then assign a different ringer melody to the entry so you can tell who's calling by the ring.

After the phone starts ringing, your Diverse 5400 recognises the caller's number and changes the ring to the VIP melody you have selected.

To mark a directory/Extra directory entry as a VIP

Press the DIRECTORY button.

Press UP or DOWN to scroll to the entry name you want.

Press RIGHT.

Press DOWN to scroll to

VIP Entry

Press RIGHT to open the VIP options list.

Press RIGHT to switch VIP ON.

Press DOWN. The current melody is played.

Press LEFT/RIGHT to scroll through and hear the 10 melody options.

Press SAVE to select the melody option you want.

Press RED PHONE to return to the idle display.

Note

You must have Caller Display working in order for this feature to work.

SAVE

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 27 (Black plate)

Page 30

BT Diverse Helpline – 08457 908 070

USING THE TELEPHONE

To copy numbers to the directory from the Redial and Calls list

When the Redial or Calls list telephone number is displayed:

Press RIGHT to open the

Options list

Scroll DOWN to

Copy to

directory

Press OK.

Scroll DOWN to

Name

Use the keypad to enter the name.

Press MENU to open the menu. Display shows

Save entry

Press OK to confirm.

Press RED PHONE to return to the idle display.

To copy a directory entry or the whole directory list to another handset

Press DIRECTORY to open the directory.

Scroll DOWN to the entr y you want.

Press RIGHT to open the Options list.

Scroll DOWN and select either:

Copy Entry

– to copy an

individual entry.

Copy List

– to copy the whole

directory list.

Press OK.

Scroll DOWN to the handset you want to copy to e.g.

INT 2

Press OK to confirm.

Press RED PHONE to return to the idle display.

Note

You will only be able to copy directory entries if you are using the Diverse 5300 or 5400 handset.

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 29 (Black plate)

Page 32

BT Diverse Helpline – 08457 908 070

USING THE TELEPHONE

To copy and change a directory entry

Press DIRECTORY to open the directory.

Scroll DOWN to the entr y you want.

Press RIGHT to open the Options list.

Scroll DOWN to

Copy and Edit

Press the OK display button.

Edit the number, if necessary.

Scroll DOWN to

Name

Edit the name, if necessary

Scroll DOWN to

Date

Edit birthday details if required.

Press the SAVE display button.

Press RED PHONE to return to the idle display.

SAVE

Note

VIP settings or voice commands cannot be copied.

Redial

Your handset automatically saves the last 10 telephone numbers dialled into a redial list.

To dial a number in the redial list

Press the REDIAL display button. The last number dialled will be displayed.

Press DOWN to scroll through the redial list.

Press the GREEN PHONE button to dial the number.

To edit a number in the redial list

Press the REDIAL display button. The last number dialled will be displayed.

Press DOWN to scroll to the number you want.

Press RIGHT to open the menu.

Press DOWN to highlight

Display Number

Press OK.

Use LEFT/RIGHT button to move the cursor and make the changes you want.

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 30 (Black plate)

Page 33

BT Diverse Helpline – 08457 908 070

USING THE TELEPHONE

To delete a number in the redial list

Press the REDIAL display button. The last number dialled will be displayed.

Press DOWN to scroll to the number you want.

Press RIGHT to open the menu.

Press DOWN to highlight

Delete Entry

Press the OK display button.

Display shows

Entry has been

deleted

Press the RED PHONE button to return to the idle display.

To copy a number into the directory

See ‘Copying numbers’, page 29.

Press the REDIAL button.

Scroll DOWN to the number you want to redial

Press MENU.

Automatic Redial

is displayed.

Press OK to confirm.

The display will show e.g.

Automatic Redial 0208 123 4567

Press the RED PHONE button to return to the idle display and cancel the automatic redial.

Automatic redial

Your BT Diverse 5400 can automatically redial a number for you every 20 seconds until the called number rings. If the called person does not answer, the call will be terminated after approx. 30 seconds. Your BT Diverse 5400 will attempt to redial up to 10 times.

Note

Automatic redial will be cancelled if you make a call to another telephone.

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 31 (Black plate)

Page 34

BT Diverse Helpline – 08457 908 070

USING THE TELEPHONE

Voice dialling

You can make calls by speaking the name of the person you want into your handset.

Up to four different users can record names for voice dialling.

A total of 29 names can be recorded for voice dialling.

Remember that your Diverse 5400 will only respond to voice that has made the original recording.

Changing a Voice dialling name

If you want to change the voice dialling name for any entry, you must first delete the existing recording and then rerecord a new name.

To record a name for Voice dialling

Once you have created a directory entry, you can add a recording for Voice dialling.

Press DIRECTORY to open the directory.

Scroll DOWN to the entr y you want.

Press VOICE. The User list is displayed.

Press UP/DOWN to select the User 1-4 identity you want, e.g.

User 1

Press OK.

Press RECORD and follow the simple on-screen prompts to record the person's name.

Press RED PHONE to return to the idle display.

To call a number using Voice dialling

Press and hold the UP button. Display shows

Please Speak

Now

Speak the name of the person you want in the same manner as your recording.

You hear the name repeated and the number is displayed and dialled.

If the name is not recognised, the display shows

Voice Not

Recognised

. Repeat Voice

dialling.

Press RETURN to go back to the start of voice recording.

VOICE

RECORD

Note

If your recording sounds too similar to another recording, a message tells you.

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 32 (Black plate)

➤

Page 35

BT Diverse Helpline – 08457 908 070

USING THE TELEPHONE

To assign or change a user name

Instead of having to remember which user you are – User 1-4 – you can set your own name for Voice dialling.

Press DIRECTORY to open the directory.

Scroll DOWN to the entr y you want.

Press VOICE.

If necessary scroll DOWN to select the User you want.

Press EDIT.

Press DELETE to delete the current User name.

Enter the User name you want, e.g. your name.

Press SAVE to confirm.

Press RED PHONE to return to the idle display.

VOICE

EDIT

SAVE



To play your Voice dialling recording

Press DIRECTORY to open the directory.

Scroll DOWN to the entr y you want.

Press VOICE.

Press DOWN to scroll to the User you want.

Press OK. The first Voice dialling name in the User list is displayed.

Press DOWN to scroll to the entry you want.

Press PLAY to hear the recording.

Either scroll to more names in the list.

Press RED PHONE to return to the idle display.

VOICE

PLAY

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 33 (Black plate)

Page 36

BT Diverse Helpline – 08457 908 070

USING THE TELEPHONE

To delete a Voice dialling name

Press DIRECTORY to open the directory.

Scroll DOWN to the entr y you want.

Press VOICE.

If necessary, press DOWN to scroll to the user you want.

Press RIGHT. Voice dialling entries have a displayed.

Press RIGHT to open the Menu.

Scroll down to

Delete Name

Press OK. Display shows

Voice Prompt Deleted

To switch the caller announcement on/off

Press RIGHT to open the menu.

Scroll DOWN to

Audio

Settings

Press OK.

Scroll DOWN to

Ringer

Settings

Press OK. Display shows

Ext. Calls

Press OK.

Scroll DOWN to highlight

Announce On/Off

Press RIGHT to switch between

and

Off

Press SAVE to confirm the setting displayed.

Press RED PHONE to return to the idle display.

Announcing the caller

If you have recorded a Voice dialling name with a directory entry, when that number calls, your Diverse 5400 will announce the name you have recorded.

For the announcement to work, the number must be received by your network’s Caller Display service.

SAVE

VOICE

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 34 (Black plate)

Page 37

BT Diverse Helpline – 08457 908 070

USING THE TELEPHONE

Available memory

The memory is shared by the main and Extra directories. The total memory available is displayed.

To access available memory

Press DIRECTORY to open the directory.

Scroll DOWN to any entr y.

Press RIGHT to open the Options list.

Scroll DOWN to

Available

memory

Press RIGHT. The number of entries available is shown.

Press RED PHONE to return to the idle display.

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 35 (Black plate)

Page 38

BT Diverse Helpline – 08457 908 070

BT CALLING FEATURES

Caller Display and other BT Calling Features

IMPORTANT

To use Caller Display and Call Waiting you must first subscribe to the Services from your Network Provider. For more information on BT’s Calling Features call BT free on 0800 800 150.

Note

Calls that are ‘withheld’, ‘unavailable’ or ‘international’ are not stored in the Calls list, as there is no telephone number sent via the Network.

Note

If you have a new call in your Calls list, the icon will flash on the handset display.

If you subscribe to a Caller Display service you can see who is calling on your handset display, as well as the date and time of their call (unless the number has been withheld).

If you have stored a name to go with the number in your handset directory, the name will be display instead.

Please ensure that you have stored the full telephone number, including the area code, otherwise the name will not match the number stored in the directory.

If the caller has withheld their number, the display will show

WITHHELD

If you call from another handset, the display shows either the handset number and INT or the name assigned to that handset.

Calls list

The Calls list contains details of up to 30 callers.

You can set whether the Calls list contains details of only calls you have missed (this is the default setting) or all received calls.

You can display, scroll through and dial numbers in the list and copy them to the directory.

If a call is received when the Calls list is full then the oldest entry will be deleted automatically.

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 36 (Black plate)

Page 39

BT Diverse Helpline – 08457 908 070

BT CALLING FEATURES

The Calls list screen

Type of Calls list:

Missed Calls

All Calls

• Most recent call is displayed first.

• Number of calls.

• Phone number of caller.

• Date and time of call.

Press to delete the call from the list.

Press ANSWER to call the number displayed.

The call is new.

The call details have been viewed.

The button lets you open:

• Calls list.

• Network Mailbox.

• Text messages (SMS).

ANSWER

DELETE

NEW CALL

OLD CALL

Press OK. The most recent call is displayed.

Press RIGHT to open the menu.

Press the DOWN button to scroll to

Calls Settings

Press OK. The current setting

Missed Calls

All Calls

ticked.

To select the option you want:

Press OK to confirm.

Press RED PHONE to return to the idle display.

To view, call or delete numbers in the Calls list

Press the ENVELOPE button.

Scroll DOWN to

Calls List

SMS

Press OK. Details of the most recent incoming call are displayed.

Press DELETE to clear the entry and see the next one.

Press ANSWER to dial the number displayed.

Press UP/DOWN to scroll through the list.

To set Calls list to contain all calls received or missed calls

The default setting is to display missed calls only.

Press the ENVELOPE button.

Press the DOWN button to scroll to Calls List.

ANSWER

DELETE

5201 Diverse5400 u_g [3] 29/8/03 5:41 PM Page 37 (Black plate)

Page 40

BT Diverse Helpline – 08457 908 070

BT CALLING FEATURES

Note

To exit the Calls list at any time, press the RED PHONE button until you reach the idle display.

Note

To copy a Calls list number to the directory or Extra directory see ‘Copying numbers’, page 29.

To delete the entire Calls list

Press the ENVELOPE button.

Scroll DOWN to

Calls List

SMS

Press OK. Details of the most recent incoming call are displayed.

Press RIGHT to open the menu.

Press DOWN to scroll to

Delete Calls List

Press OK to confirm.

Press RED PHONE to return to the idle display.

To accept a waiting call

During a call when you hear the Call Waiting beeps:

The number (or name if stored in the directory) of the second caller will flash on the display.

Press the MENU display button.

Display shows

Accept Call

Waiting

Press OK.

Press the UP/DOWN buttons to switch between callers.

Call Waiting

If you subscribe to a Call Waiting service, when you are on a call and another person tries to call you, the second caller's number will appear on the handset display and you will hear an intermittent beep through the handset. This is to alert you to the other caller waiting to speak to you.

SMS (text messaging)

For instructions on using the SMS functionality, please refer to the separate ‘Using SMS user guide’.

Network Mailbox

By pressing the button you can also access your network mailbox facility whether it is behind a switchboard or via 1571.

For instructions on setting up and operating this function, please refer to page 41, “To set one-touch access to your messages”.

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 38 (Black plate)

Page 41

BT Diverse Helpline – 08457 908 070

BT CALLING FEATURES

Other BT Calling Features

Your Diverse 5400 handset helps you use your Network's special services. For full details ask your Network provider.

Options before you make a call

Before you make a call you can:

• Withhold your number from being sent for one call.

• Switch Call Waiting on/off.

• Switch off Ring Back.

• Divert all calls to another number. (This is a subscription service.)

To withhold your number from being sent

Your number appears on the display of the person you call. You can withhold it from the next call.

Enter 141 before dialling the number you are calling.

Press the RIGHT button to open the menu.

Press the DOWN button to scroll to

Select Services

Press OK.

Withhold number

highlighted.

Press OK.

Enter the telephone number you want to call.

Press GREEN PHONE. The number is dialled and your number is withheld from this call.

GHI

To switch Call Waiting on/off

The default setting is on.

Press the RIGHT button to open the menu.

Press the DOWN button to scroll to

Select Services

Press OK.

Press the DOWN button to scroll to

All Calls

Press OK.

Press the DOWN button to scroll to

Call Waiting

Press OK.

Press LEFT/RIGHT to select between

and

Off

Press RED PHONE to return to the idle display.

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 39 (Black plate)

Page 42

BT Diverse Helpline – 08457 908 070

BT CALLING FEATURES

Ring Back Off

If you make a call and the number is engaged you can set your phone to ring you back once the number is free by pressing 5. If you want to cancel this request, i.e. if you have to go out before the call rings back.

Press the MENU button to open the menu.

Press the DOWN button to scroll to

Select Services

Press OK.

Press the DOWN button to scroll to

Ringback Off

Press OK.

To set Call Divert

You can divert all incoming calls to another number where you can be reached.

You can divert:

•

All calls

– calls are put straight through to the number you have set.

•

No answer

– calls are forwarded if your phone is not answered.

•

When busy

– calls are forwarded if your phone is engaged.

Press the RIGHT button to open the menu.

Press the DOWN button to scroll to

Select Services

Press OK.

Press the DOWN button to scroll to

All Calls

Press OK.

Press the DOWN button to scroll to

Call Divert

Press OK.

Press LEFT/RIGHT to select

All calls, No answer

When busy

Scroll DOWN to

Call no

Press RIGHT. Display shows

Phone Number:

Enter the telephone number to which you want calls diverted.

Press the MENU button.

Press OK to save the entr y.

Scroll DOWN to

Status

Press RIGHT to select

Off

Press RED PHONE to return to the idle display.

JKL

Note

Call Divert is a subscription service with your Network provider. You may be charged a fee.

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 40 (Black plate)

Page 43

BT Diverse Helpline – 08457 908 070

ADDITIONAL FEATURES

To set or change one-touch access to your messages

Press the RIGHT button to open the menu.

Press DOWN to scroll to

Voice Mail

Press OK. Display shows

Set Key 1

Press OK. Display highlights

Network Mailb

Press OK. Display shows

Enter mailbox number

Enter the telephone number of your messaging service. For example, 1571 to access ‘BT Answer’ voice mail service.

Press the MENU button.

Press OK. Display shows

Entry Saved

Press RED PHONE to return to the idle display.

Voice Mail

If you have Call Minder or a Network Messaging service on your telephone line, you can set the 1 button to access your messages.

Additional features

To set up quick access to your Voice Mail service when connected to a switchboard e.g. Meridian Mail

Follow the steps given above, but when you come to enter the telephone number of your messaging service, you will need to follow the example below:

Enter the access number for your messaging service e.g. 7000.

Press and hold the RECALL button until

is displayed to enter a pause in the dialling sequence.

Enter your extension number followed by a

, e.g. 1234#.

Press and hold the RECALL button until

is displayed to enter another pause in the dialling sequence.

Enter your pin followed by a

, e.g. 0000#.

The entire number should look like this:

7000P1234#P000000#

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 41 (Black plate)

Page 44

BT Diverse Helpline – 08457 908 070

ADDITIONAL FEATURES

Press and hold down the 1 button.

When set up it will take you into your message service. If during the set up you entered your security PIN as well as the telephone number you will be taken quickly into your messages. If the security PIN was not included you will have to enter this number now followed by a #.

You will be taken into your messages.

Press RED PHONE to return to the idle display.

Note

If you store your security PIN as part of a quick access number, anyone with access to the handset will be able to retrieve your messages.

To call your Network Voice mailbox

Press OK.

Press RED PHONE to return to the idle display.

Note

If your handset is registered to an answering machine base i.e. BT Diverse 5450 you will be given the choice of accessing your answering machine messages or Network Messaging Service. See your BT Diverse 5450 user guide for further information.

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 42 (Black plate)

Page 45

BT Diverse Helpline – 08457 908 070

HANDSET SETTINGS

Handset settings

You can choose a range of settings to suit your personal preferences.

To set the date and time

If you have subscribed to a Caller Display service your BT Diverse 5400 will automatically set the correct date and time when you receive your first call. You can also set the date and time manually.

Press the RIGHT button to open the menu.

Press DOWN to scroll to

Calender/Clock

Press OK.

Press DOWN to scroll to

Date/Time

Press OK.

Enter the date – day, month, year.

Scroll DOWN to

Time

and enter

the time – hours, minutes.

Scroll DOWN to

Time Mode

Press LEFT/RIGHT to switch between the 12 and 24 hour clock.

Press SAVE to confirm.

Press RED PHONE to return to the idle display.

SAVE

Alarm clock

Providing the date and time has been set, your BT Diverse 5400 provides alarm clock functions.

To use the alarm clock

Press the RIGHT button to open the menu.

Press DOWN to scroll to

Calender/Clock

Press OK.

Press DOWN to scroll to

Alarm Clock

Press OK.

Press LEFT/RIGHT to switch the alarm clock function On.

Scroll DOWN to

Time

Enter the time at which you want the alarm to go off, e.g. 0730 for 7.30am.

If your handset is set to 12 hour mode, press the AM/PM display button to switch between amand

Press SAVE to confirm.

Press RED PHONE to return to the idle display.

AM/PM

SAVE

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 43 (Black plate)

Page 46

BT Diverse Helpline – 08457 908 070

HANDSET SETTINGS

To switch the alarm off

When the alarm goes off, it will ring for 30 seconds.

Press the SILENCE display button to switch the alarm off.

SILENCE

Note

The alarm clock will ring only if the handset is in idle mode. It will not ring if the handset is being used as a room monitor or while a call is being made.

To set a different ringer melody and volume for the alarm clock, see page 47.

To prevent the alarm from ringing

Press the RIGHT button to open the menu.

Press DOWN to scroll to

Calender/Clock

Press OK.

Press DOWN to scroll to

Alarm Clock

Press OK.

Press LEFT/RIGHT to switch the alarm clock function

Off

Display shows

Save

. Press the

OK button.

Press RED PHONE to return to the idle display.

Appointments

You can use your handset to remind you of up to 5 appointments.

To set an appointment reminder call

Press the RIGHT button to open the menu.

Press DOWN to scroll to

Calender/Clock

Press OK. Display shows

Set Appoints

Press OK. Display highlights

Appointment 1

If required, scroll DOWN to another appointment setting

1-5

Press OK.

Press LEFT/RIGHT to switch the appointment

Scroll DOWN to

Date

Enter the date of the appointment – day, month, e.g. 2005 for 20th May.

Scroll DOWN to

Time

Enter the time of the appointment – hours, minutes, e.g. 1530 for 3.30pm

Scroll DOWN to

Notes

Press the EDIT display button.

EDIT

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 44 (Black plate)

Page 47

BT Diverse Helpline – 08457 908 070

HANDSET SETTINGS

Enter the name or place, up to 16 characters.

Press OK.

Press SAVE to confirm.

Press RED PHONE to return to the idle display.

SAVE

Note

If you do not enter a name, the display will show Appointment when you receive the reminder call.

You can set a different ringer melody and volume for appointment reminder calls, see page 47.

Appointment details will only be displayed when the handset is in idle mode. It will not be shown if the handset is being used as a room monitor or while a call is being made.

If required, scroll DOWN to another appointment setting

1-5

Press OK.

Press LEFT/RIGHT to switch the appointment

Off

Press SAVE to confirm.

Press RED PHONE to return to the idle display.

SAVE

To cancel an appointment reminder call

Press the RIGHT button to open the menu.

Press DOWN to scroll to

Calender/Clock

Press OK. Display shows

Set Appoints

Press OK. Display highlights

Appointment 1

To receive the appointment alarm

When the alarm goes off, it will ring for 30 seconds.

Press the SILENCE display button. The Appointment is then deleted from the list.

SILENCE

To view and delete missed appointments and birthday reminders

If you miss an appointment or birthday reminder, it will be saved in a list. You can view and delete entries in this list.

Press the RIGHT button to open the menu.

Press DOWN to scroll to

Calender/Clock

Press OK.

Scroll DOWN to

Missed Dates

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 45 (Black plate)

Page 48

BT Diverse Helpline – 08457 908 070

HANDSET SETTINGS

Note

If there is a new appointment in the list, the display shows

APPOINT

. You can press this display button to open the list of appointments and birthdays. Once you have viewed the list, the

APPOINTS

display will disappear from the screen.

Emergency numbers cannot be dialled while the keypad guard is switched on.

Press and hold the

/KEY

button to use the keypad again.

Press OK.

Scroll DOWN through the list. A missed appointment has a

symbol. A missed birthday

has a symbol.

Press DELETE to delete the entry.

Press RED PHONE to return to the idle display.

DELETE

IMPORTANT

An incoming call automatically switches the keypad on again. Once the call is ended, the keypad reverts to off.

To switch keypad guard on/off

You can turn the handset buttons off so that you do not accidentally dial a number when carr ying the handset around.

Press and hold the right hand side of the

/KEY button.

Display shows and the keypad is locked.

To change the handsfree/ earpiece volume

Press the RIGHT button to open the menu.

Press DOWN to scroll to

Audio Settings

Press OK. Display highlights

H/set Volume

Press OK. You hear the current handsfree speaker volume.

Press LEFT/RIGHT to adjust the volume.

Scroll DOWN to .

Press LEFT/RIGHT to adjust the earpiece volume.

Press SAVE to confirm.

Press RED PHONE to return to the idle display.

SAVE

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 46 (Black plate)

Page 49

BT Diverse Helpline – 08457 908 070

HANDSET SETTINGS

To change the ringer melody and volume

You can choose from:

• 5 ringer volumes (original setting =

• Crescendo ring (increasing volume).

• 10 ringer melodies.

You can also set time controls where your handset will ring more e.g. during the night.

You can choose different settings for:

• External calls.

• Internal calls.

• Appointment reminders (to set an appointment reminder, see page 44).

• Alarm calls (to set an alarm call, see page 43).

• All calls.

Press the RIGHT button to open the menu.

Press DOWN to scroll to

Audio Settings

Press OK.

Press DOWN to scroll to

Ringer Settings

Press OK. Display highlights

Ext. calls

If you wish, you can scroll down to select individual ringer and volume settings for Internal calls, Appointment reminder calls, Alarm calls or for All calls.

Set melody and volume:

Press OK, the current volume and melody is displayed.

Press LEFT/RIGHT to select the volume you want.

Scroll DOWN to the melody setting.

Press LEFT/RIGHT to select the melody you want.

Scroll DOWN to

Announce

. If you have recorded names for Voice dialling, your Diverse 5400 will announce those names when you are called.

Press LEFT/RIGHT to switch between

and

Off

Set the time control, if required (this is only available under the Ext. Calls menu).

Press the TIME C display button to see the time control screen.

TIME C

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 47 (Black plate)

Page 50

BT Diverse Helpline – 08457 908 070

HANDSET SETTINGS

Press LEFT/RIGHT to switch between Onand

Off

Scroll DOWN to

From

Enter the start time e.g. 2330 for 11.30pm.

Scroll DOWN to

Until

Enter the end time e.g. 0730 for 7.30am.

Scroll DOWN to .

Press LEFT/RIGHT to set the volume.

Press SAVE to confirm the time control.

Press SAVE to confirm the full setting.

Press RED PHONE to return to the idle display.

SAVE

Shortcut buttons

To switch all ringer tones off

If you want to switch the handset ringer off quickly you can also press and hold the ✱/BELL button. The display shows

All ringer tones off

, then reverts to the idle screen with the icon displayed.

To switch the current ring off

When the phone rings, press the SILENCE display button.

If you have switched the ringer off, you can set an ‘Attention’ beep to let you know when you have a call.

When the ringer is switched off:

Press and hold the ✱/BELL button for 3 seconds. Display shows

BEEP ON

. Incoming calls will now be signalled by a short beep.

Press and hold the ✱/BELL button again to switch the ringer back on.

To turn the handset ringer back on, press and hold the ✱/BELL. The display shows

All

ringer tones on

, then the idle screen without the RINGER MUTE symbol.

SILENCE

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 48 (Black plate)

Page 51

BT Diverse Helpline – 08457 908 070

HANDSET SETTINGS

To switch the first ringer tone off

The first ringer tone of an incoming SMS text message is automatically switched Off. You can change this to On.

However, if the first ringer tone is switched on, and you answer an SMS call on the first ringer tone, the SMS text message will be lost as your phone will not have had the time to receive it all.

Press the RIGHT button to open the menu.

Enter the code 8919.

Press 0 to hear the first ringer tone.

Press 1 to switch the first ringer tone off.

Press OK to confirm.

Press OK.

Press DOWN to scroll to

Ringer Echo

Press OK to switch

Off

Press RED PHONE to return to the idle display.

To adjust the ringer quality

In some situations the quality of certain melodies may not be as good as normal. You can increase the quality of melodies 4-10.

Press the RIGHT button to open the menu.

Press DOWN to scroll to

Audio Settings

To change the display language

Press the RIGHT button to open the menu.

Press DOWN to scroll to

H/set Settings

Press OK.

Press DOWN to scroll to

Language

Press OK. The current language is marked by a .

Press UP/DOWN to scroll through the languages.

Press OK to select the language you want.

Press RED PHONE to return to the idle display.

Note

If you accidentally select the wrong language:

Press , then to choose the right language OK .

ABC

PQRS

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 49 (Black plate)

Page 52

BT Diverse Helpline – 08457 908 070

HANDSET SETTINGS

To switch auto talk on or off

When you receive a call, you can answer it simply by lifting the handset off the base station. This is called auto-talk. When you switch auto-talk off, you answer all calls by pressing the GREEN PHONE button.

Press the RIGHT button to open the menu.

Press DOWN to scroll to

H/set Settings

Press OK. Display highlights

Auto Answer

. A means

auto answer is switched On.

Press OK to select either

Off

Press RED PHONE to return to the idle display.

To switch off your handset’s beeps and tones

You can switch off and on:

• Key beeps when you press

each button on your handset

• Confirmation beeps when you

have finished making a setting or action on your handset.

• Batter y Low warning beep.

You can also set this to sound only during a call.

Press the RIGHT button to open the menu.

Press DOWN to scroll to

Audio Settings

Press OK.

Press DOWN to scroll to

Advisory Tones

Press OK.

Press LEFT/RIGHT to switch Key Tones Onor

Off

Scroll DOWN to Confirm.

Press LEFT/RIGHT to switch confirmation tones

Off

Scroll DOWN to

Battery

Press LEFT/RIGHT to switch the battery tones

On, Off

In Call

Press SAVE to confirm.

Press RED PHONE to return to the idle display.

SAVE

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 50 (Black plate)

Page 53

BT Diverse Helpline – 08457 908 070

HANDSET SETTINGS

To reset a handset

You can restore a handset to its factory settings.

The handset’s registration, the main Directory, Extra directory, SMS directory and the Calls list are not affected.

Press the RIGHT button to open the menu.

Press DOWN to scroll to

H/set Settings

Press OK. Display shows

Auto Answer

Scroll DOWN to

Reset Handset

Press OK.

Press YES to confirm or NO to exit.

Press RED PHONE to return to the idle display.

The settings after a reset will be:

Base station

selection Best base Handset volume 1 Handsfree volume 3 Ringer volume 5 Time control for ringer volume Off Ringer melody 1 Name announcement Off Auto talk On Handset beeps and

tones On Display language English Character map English Alarm clock/

appointment Off Appointment name Deleted Redial list Empty Room monitor Off Room monitor

sensitivity High

Note

To cancel the reset at any time, press RED PHONE button.

YES

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 51 (Black plate)

Page 54

BT Diverse Helpline – 08457 908 070

HANDSET SETTINGS

Note

The room monitor function drains the handset batteries more quickly than normal use. Make sure the handset is fully charged before leaving it in the room to be monitored.

To switch the room monitor on

When there are sounds in the room, the monitor function detects them.

The listening handset then rings either the receiving handset selected or the phone number you have set. You can then listen.

Using a handset as a room monitor

If you have at least two handsets registered to your BT Diverse 5400 base station you can leave one handset in a room and monitor the sounds in the room by making an internal or an external call to another handset. This could be used, for example, in a child’s bedroom.

Place the handset 1-2 metres away, with the microphone facing the child. Always check that the phones are working properly.

Press MENU.

Scroll DOWN to

Add. Features

Press OK. Display highlights

Room Monitor

Press OK. Display shows the Room Monitor setting.

Press RIGHT to switch the Room Monitor setting

Scroll DOWN to

Call to

Press RIGHT.

Either enter the internal number of a handset.

Enter the telephone number of a phone which you want to use as a listening device.

Press MENU. Display shows

Save Entry

Press OK. Display returns to the Room Monitor setting.

Scroll DOWN to

Level

Press LEFT or RIGHT to set the sensitivity

Low

High

Press SAVE to confirm. The room monitor function is now switched on.

SAVE

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 52 (Black plate)

Page 55

BT Diverse Helpline – 08457 908 070

HANDSET SETTINGS

To change an external or internal number on the room monitor

You can select another telephone to use as a listening device.

Press MENU.

Scroll DOWN to

Add. Features

Press OK. Display highlights

Room Monitor

Press OK. Display shows the Room Monitor setting.

Scroll DOWN to

Call to:

Press EDIT.

Press DELETE to delete the current number.

Either

Enter a new external number

Press the MENU button. Display shows

Save Entry

Press OK.

Press INT to enter another handset number.

Scroll DOWN to the handset you want.

Press OK to confirm.

EDIT



INT M

To switch off the room monitor

If you receive a room monitor alert call, you can then switch off the room monitor function.

Accept the room monitor alert call:

Press 9 then

. The room monitor is switched off after about 90 seconds and no more alert calls will be sent.

At the monitoring handset:

When you get back to the room that was being monitored, press OFF on the handset to return it to idle mode.

Walk and talk

You can use any two BT Diverse 5400 handsets as walkie talkies providing they are registered to the same base station. The walkie talkie function works when you are out of range of the base station, for example, when you are away on holiday.

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 53 (Black plate)

Page 56

BT Diverse Helpline – 08457 908 070

HANDSET SETTINGS

IMPORTANT

Two handsets will have an active range between them of up to 300 metres.

For the Walkie Talkie function to work, both handsets must be set to search for Best Base, see ‘To select best base’, see below.

Handsets cannot receive incoming calls from external callers.

To select best base

If your handset is registered at several base stations the handset will automatically switch to the base with the strongest signal. You also need this setting if you want to use the handsets as walkie talkies.

Press MENU.

Scroll DOWN to

H/set Settings

Press OK.

Scroll DOWN to

Select Base

Press OK.

Scroll DOWN to

Best Base

Press OK. A appears by

Best Base

Press OK to confirm.

Press RED PHONE to return to the idle display.

To switch Walk and Talk on/off

Press MENU.

Scroll DOWN to

Add. Features

Press OK.

Scroll DOWN to

Walk and Talk

Press OK. Display shows

Walk and Talk

Press OFF to switch the walkie talkie function off.

OFF

To set a Walk and Talk handset to room monitor mode

When in Walk and Talk mode, you can use one handset as a room monitor.

Press RIGHT to open the menu.

Scroll DOWN to

Room Monitor

Press OK.

Press LEFT or RIGHT to switch Room Monitor On.

Scroll DOWN to

Level

Press LEFT or RIGHT to select

Low

High

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 54 (Black plate)

Page 57

BT Diverse Helpline – 08457 908 070

HANDSET SETTINGS

Press SAVE to confirm. The room monitor function is switched on and the other handset will be called if the monitoring handset detects a noise.

Press the OFF button on the monitoring handset to switch room monitoring off. The handset will then return to walkie talkie mode.

SAVE

OFF

Note

Always check handsets used as room monitors for level sensitivity and to confirm that the connection works.

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 55 (Black plate)

Page 58

BT Diverse Helpline – 08457 908 070

HELP

Help

Try these solutions to the most common problems.

Problem Possible cause Solution

Handset not registering. The charger is not powered.

Make sure that the power supply

There are no batteries in the

is plugged in at the charger and

handset.

switched on. Make sure that the rechargeable batteries (included) are fitted in the handset correctly. Switch the handset off and then back on again, place the handset on to the base again and leave for approx. 1 minute to try registering again.

If this is still unsuccessful, then try a manual registration (see page 13).

You have forgotten your base You have changed the PIN. Try entering the default PIN (0000). station PIN number. If you have changed the PIN and

cannot remember the number you will need to contact the BT Diverse Helpline on 08457 908070.

No display. The handset is switched off. Hold down RED PHONE for

1 second.

The batteries may be flat. Charge or replace the batteries.

Nothing happens when you press Keyguard may be switched on. Hold down the #button for any button. 1 or 2 seconds.

No connection between handset Are you out of range of the base Move closer to the base station. and base station. station.

Handset is not registered. Register the handset.

Base station is not switched on. Check the mains power is connected

correctly.

Handset on the base does not Is another handset using the line Maximum charging power is only charge. for a long time? possible when no calls are being made.

Is the handset placed on the base Make sure that the handset is placed properly? on the base or in the charger correctly.

You will hear a confirmation tone.

Are the batteries in correctly? Check that you have put the batteries

in the right way, you will hear a confirmation tone.

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 56 (Black plate)

Page 59

BT Diverse Helpline – 08457 908 070

HELP

The incoming caller’s number is The caller’s number has been Caller has to allow their number to not displayed even though you withheld. be sent. have Caller Display.

The handset or base station does The ringer has been switched off. Switch the ringer back on, see page 47.

Call Diversion has been set to Switch off Call Diversion, see page 40. All Calls

You keep hearing the error beep You have pressed the wrong Check the prompts in the display (a descending tone). button in a sequence. or refer to instructions in the

user guide.

Voice dialling does not work. You may be speaking too far Move to within 20cm of the handset

away from the handset. microphone.

There may have been too much Record your Voice dialling name in background noise when recording quiet surroundings. the Voice dialling name.

The other caller cannot hear me. You may have pressed the INT Press the RETURN display button.

button and muted the handset.

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 57 (Black plate)

Page 60

BT Diverse Helpline – 08457 908 070

GENERAL INFORMATION

General information

Within the 12-month guarantee period:

If you experience difficulty using the product, prior to returning it, please read the Help section beginning on page 56, or contact the BT Diverse Helpline on 08457 908070 for assistance.

In the unlikely event of a defect occurring, please follow the Helpline's instructions for replacement or repair.

Outside the 12-month guarantee period:

If your product needs repair after the guarantee period has ended, the repair must meet the approval requirements for connection to the telephone network. We recommend that you contact the Helpline on 08457 908070 and ask for details of our recommended repair agents.

Guarantee

Your BT Diverse 5400 is guaranteed for a period of 12 months from the date of purchase.

Subject to the terms listed below the guarantee will provide for the repair of, or at BT’s or its agent’s discretion the option to replace the BT Diverse 5400, or any component thereof, (other than batteries), which is identified as faulty or below standard, or as a result of inferior workmanship or materials. Products over 28 days old from the date of purchase may be replaced with a refurbished or repaired product.

The conditions of this guarantee are:

• The guarantee shall only apply to defects that occur within the 12 month guarantee period.

• Proof of purchase is provided.

• The equipment is returned to BT or its agent as instructed.

• This guarantee does not cover any faults or defects caused by accidents, misuse, fair wear and tear, neglect, tampering with the equipment, or any attempt at adjustment or repair other than through approved agents.

• This guarantee does not af fect your statutory rights.

BT Accessories and replacement items

For a full range of accessories and replacement items for BT products please call 0870 240 5522, or visit:

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 58 (Black plate)

Page 61

BT Diverse Helpline – 08457 908 070

GENERAL INFORMATION

Technical information

How many telephones can you?

All items of telephone equipment have a Ringer Equivalence Number (REN), which is used to calculate the number of items which may be connected to any other telephone line.

The BT Diverse 5410 or 5450 (with up to 6 handsets) has a total REN of 1.

Any other instrument provided by BT may be assumed to have a REN of 1 unless stated otherwise.

A total REN of 4 is allowed per telephone line. (For example, if the BT Diverse 5410 or 5450 is used in conjunction with three extension telephones, each with a REN of 1, then the total REN = 4).

Only use approved power supply, item code C39280-Z4-C478.

R&TTE

This product is intended for use within the UK for connection to the public telephone network and compatible switchboards.

This equipment complies with the essential requirements for the Radio Equipment and Telecommunications Terminal Equipment Directive (1999/5/EC). In demonstration with the Essential Requirement for efficient use of the radio spectrum, the product complies with TBR6. For a copy of the Declaration of Conformity please contact the BT Diverse Helpline on 08457 908070.

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 59 (Black plate)

Page 62

BT Diverse Helpline – 08457 908 070

INDEX

Index

Alarm clock 43

Appointment call 44 Announcing the caller 34

Auto talk on/off 50

Base selection 54

Batteries

charging 12 installing 12 performance 14 replacing 12

warning beeps 14 Beeps and tones 50 Belt clip 15 Birthday alert signal 25

Call divert 40

Call timer 18 Call Waiting 38 Caller Display 36 Calling Features 36

Call Divert 40

Caller Display 36

Calls list 36

Call Waiting 38

Ring Back 40

withhold your number 39

Voice Mail 41 Calls list 36

call number 37

copy to directory 29

delete a call 37

delete complete list 38

dial a number from 37

Calls

end 18 external 17, 18 handsfree 18 holding 20 internal 19 making 17 on hold 20 preparatory dialling 17 receiving 18 redial 30 secrecy 19 three-way 21

transferring 20 Character map 23 Copying numbers 29

Date set 15

Delete

all directory numbers 26, 27

Calls list call 37

complete Calls list 38

directory entry 25

redial list 31 De-register handset 13 Directory – main and extra 22

birthday alert signal 25

character map 23

copy entry to another

handset 29 delete all entries 26, 27 delete an entry 25 dial a number 24 edit an entry 24 extra directory 26

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 60 (Black plate)

Page 63

BT Diverse Helpline – 08457 908 070

INDEX

store name and number 22 view an entry 24 VIP ringing 27

Display icons 8

Earpiece volume 46

Ending calls 18 External calls 17,18 Extra directory 26

Guarantee 58

Handset

beeps and tones 50 display icons 8 melody 47 on/off 17 reset 51 ringer 47

volume 47 Handset quick guide 7 Handsfree 18 Help 56 Holding calls 20

Internal calls 19

Keyguard 46

Language change 49

Listening In 21

Main menu 4

Making calls 17 Melody 47 Memory available 35 Music on hold 20

Network Mailbox 38

On/off

alarm clock 43

auto talk 50

beeps and tones 50 handset power 17 keyguard 46 room monitor 52 secrecy 19 walk and talk 54

Page a handset 19

Power connection 11 Preparatory dialling 17

Quick guide

display icons 8 handset 7

Range warning 14

Receiving calls 18 Redial 30

automatic 31 copy to directory 29 delete 31 dial number in redial list 30 edit number in redial list 30

Registering

handset 12

manually 13 REN, how many phones can I have? 59 Reset

handset settings 51

Room monitor 52

Safety information 10

Secrecy 19 Setting up 11 Shortcut buttons 48

Technical information 59

Three-way conversation 21 Time – set 15 Transferring calls 20

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 61 (Black plate)

Page 64

BT Diverse Helpline – 08457 908 070

INDEX

VIP ringing 27

Voice dialling 32 Voice Mail 41

retrieve messages 42 set one-touch access 41 set up quick access behind

switchboard 41

Volume

earpiece 46 handset ringer 47 handsfree 18, 46

Walk and talk 53

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 62 (Black plate)

Page 65

Visit us at www.bt.com

Ofﬁces worldwide

The telecommunications services described in this publication are subject to availability and may be modiﬁed from time to time. Services and equipment are provided subject to British Telecommunications plc’s respective standard conditions of contract. Nothing in this publication forms any part of any contract.

© British Telecommunications plc 2003. Registered Ofﬁce: 81 Newgate Street, London EC1A 7AJ. Registered in England No. 1800000. BT Diverse 5400 (08/03) 3 Designed and produced by The Art & Design Partnership Ltd.

Siemens number: A31008-S001-P002-1-7620

CE compliant to R&TTE Directive (1999/5/EC)

0682

5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 63 (Black plate)

BT BT DIVERSE 5400 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual