Bryant 367AAN User Manual

LOW-BOY
OIL FURNACE

367AAN

Sizes 105 & 120

Series A

FEATURES

Low-Boy Design —The compact low-boy, dedicated upflow

design is ideal for installation in basements where overhead
space is limited.

The model 367AAN is available in 2 sizes. Each size is
capable of 3 heat/airflow combinations by a simple nozzle
change. Unit 036105 covers inputs of 70,000, 91,000 and
105,000 Btuh, and unit 060120 covers inputs of 119,000,
140,000 and 154,000 Btuh. This eliminates the need to stock 6
separate units.

Venting —The 367AAN has a rear flue outlet. The unit may be

vented using Type L vent material and a factory-approved or
masonry chimney. It may also be sidewall vented with an
approved power venter.

Combustion Chamber/Heat Exchanger —The unique combi-

nation combustion chamber/heat exchanger is made mainly of
stainless and aluminized steel for durability and long life. Its
heat transfer properties make it highly efficient. All seams are
tightly welded for leak-free operation.

Warranties —Limited Lifetime Warranty on combustion

chamber/heat exchanger. Five-year Warranty on Beckett
burner. Two-year Warranty on Honeywell ignition control.
Contact your dealer for details.

Beckett Oil Burner and Honeywell Controls —High quality

Beckett oil burner allows safe and efficient combustion of oil.
Honeywell ignition control and fan timer board provide for
reliable operation and easy connection of thermostat and
accessory wiring.

Casing —Made of 18 gage painted steel for years of durability.

LOW-BOY

OIL FURNACE

The model 367AAN combines high efficiency and quiet
operation with the latest in oil heating technology. The
367AAN is available in 2 sizes. Each size allows for 3 possible
input capacities by a simple nozzle change. The furnace
design is a low-boy style for upflow applications, especially
where space is limited. The components of the 367AAN are
the best available. The 367AAN features a Beckett oil burner
and a Honeywell ignition control and fan timer board. The
367AAN is among the most efficient and quietest oil furnaces
available and will provide years of quality service. As with
other Bryant furnaces, this model is designed to work as part
of a total home comfort system which includes elements for
cooling, air cleaning, humidification, ventilation, and zoning.

The cabinet features an insulated enclosure for the burner and
controls.

Insulation and Soundproofing —A unique silencer along with

insulated walls and rubber blower mounts efficiently controls
combustion noise and vibrations and makes this unit 1 of the
quietest on the market.

Adjustable Blower Speed —Four-speed blower for precise

airflow selection of heating or cooling operation.

Constant Low-Speed Blower Switch —Allows continual low-

speed air circulation through the home to maximize comfort
while maintaining efficiency. Air is constantly filtered and
stagnant air is reduced.

Certifications —The 367AAN is UL and ULC certified. The

efficiency rating is GAMA certified.

Form No. PDS 367A.105.2

VENT 
CONN

21 1⁄4″

20"20"20"

10"

3"

D

C

A

E

B

DIMENSIONS (In.)

UNIT
SIZE

036105 21-1/4 53-3/4 31-1/2 26-1/2 20 20 5
060120 21-1/4 60-5/32 34-3/4 28-11/32 22 24 6

UNIT DIMENSIONS

ABCDE

FLUE

HEIGHT

RETURN

OPENING

SUPPLY

OPENING

ama

MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS (In.)

UNIT APPLICATION LOW-BOY

SIDES Furnace 1

Supply Plenum and Warm-Air Duct Within 6 ft of Furnace 1

BACK Service Clearance 19
TOP

BOTTOM* 0
FLUE PIPE Horizontally or Below Pipe 4

FRONT 8

* Floor may be combustible.

NOTE: Adequate service clearance should be provided over and above these dimensions as required.

Furnace Casing or Plenum 2
Horizontal Warm-Air Duct Within 6 ft of Furnace 2

Vertically Above Pipe 9

A98009

VENT

CONNWidth Depth Height

—2—

°

SPECIFICATIONS

UNIT SIZE

SHIPPING WEIGHT (Lb) 235 260

RATINGS AND PERFORMANCE

Input Btuh 70,000 91,000 105,000 119,000 140,000 154,000
Output Capacity* Nonweatherized ICS 57,000 74,000
Nozzle—100 psig Pump Pressure 0.50—70W 0.65—70W
Firing Rate (GPH) 0.50 0.65
AFUE%* Nonweatherized ICS 81.4 81.4
Certified Temperature Rise Range
Recommended Heating Blower Speed Med-Low Med-High
Heating CFM @ 0.2-in. wc Static Pressure 840 1130
Cooling CFM @ 0.5-in. wc Static Pressure 1250 1250

ELECTRICAL

Unit Volts—Hertz—Phase 115—60—1
Operating Voltage Range Min—Max† 104—132
Maximum Unit Amps 12.2
Minimum Wire Size (AWG) 14
Maximum Wire Length (Ft)‡ 26
Maximum Fuse or Ckt Bkr Amps** 15
Transformer (24v) 40va
External Control Heating 40va
Power Available Cooling 30va
Air Conditioning Blower Relay Standard

BURNER AND CONTROLS

Burner Model (3450 RPM)*** Beckett AFG-F3
Oil Pump Stages 1

Ignition Control Continuous
Heating Blower Control (Off Delay) Selectable 60, 90, 120, or 150 Sec

BLOWER DATA

Direct-Drive Motor HP (PSC) 1/3
Motor Full Load Amps 6.2
RPM (Nominal)—Speeds 1075—4
Blower Wheel Diameter X Width (In.) 10 X 8
Filter Size (In.)—Disposable (2) 12 X 20 X 1

FACTORY-AUTHORIZED AND LISTED, DEALER-INSTALLED OPTIONS

Electronic Air Cleaner AIRA
Mechanical Air Cleaner 902B
Air Cleaner Cabinet KEACA
Humidifier Model 912D, 912E, 913B, 913C, or 914A
Heat Recovery Ventilator Model VA3B, VB5B, or VC5B
Energy Recovery Ventilator Model VL3A
Thermostat—Non-Programmable For Use with 1-Speed Air Conditioner—TSTATBBNAC01-A

Thermostat—Programmable For Use with 1-Speed Air Conditioner—TSTATBBPAC01-A

Zoning—2-Zone ZONEKIT2ZBDP, ZONEBB2KIT01
Zoning—4-Zone ZONEBB4KIT01
Zoning—8-Zone ZONEBB8KIT01
OIL NOZZLE KIT†† (QTY-50) 0.50 GPH For 70,000 Btuh — KLANZ0150050
OIL NOZZLE KIT†† (QTY-50) 0.65 GPH For 91,000 Btuh — KLANZ0250065
OIL NOZZLE KIT†† (QTY-50) 0.75 GPH For 105,000 Btuh — KLANZ0350075
OIL NOZZLE KIT‡‡ (QTY-50) 0.85 GPH For 120,000 Btuh — KLANZ0450085
OIL NOZZLE KIT‡‡ (QTY-50) 1.00 GPH For 140,000 Btuh — KLANZ0550100
OIL NOZZLE KIT‡‡(QTY-50) 1.10 GPH For 154,000 Btuh — KLANZ0650110

* Capacity and AFUE in accordance with U.S. Government DOE test procedures.
† Permissible voltage limits for proper furnace operation.
‡ Length shown is measured 1 way along wire path between unit and service panel for maximum 2% voltage drop.

** Time-delay fuse recommended.
*** Beckett AFG-F6 requires field supplied and replacement burner firing head.
†† For unit 036105
‡‡ For unit 060120

ICS—Isolated Combustion System
PSC—Permanent Split Capacitor

As Factory Shipped.

F 55—85 55—85 55—85 55—85 55—85 55—85

For Use with 2-Speed Heat Pump—TSTATBBP2S01-A or TSTATBBPDF01-A

—3—

036105 060120

85,000 98,000 115,000 125,000

0.75—70B 0.85—70B 1.00—70W 1.10—70W

0.75 0.85 1.00 1.10

81.4 80.6 80.6 80.6

High Med-Low Med-High High
1425 1220 1555 1890
1250 1865 1865 1865

15.7

20

Beckett AFG-F3

3/4

9.5

12 X 10

(2) 16 X 20 X 1

For Use with 2-Speed Air Conditioner—TSTATBBN2S01-A

For Use with 2-Speed Heat Pump—TSTATBBN2S01-A

For Use with 2-Speed Air Conditioner—TSTATBBP2S01-A

For Use with 1-Speed Heat Pump—TSTATBBPDF01-A

Beckett

AFG-F6

UNIT

SIZE

036105

060120

AIR DELIVERY—CFM (With Filter)

BLOWER

SPEED

High 1425 1350 1305 1250 1170 1030 925 805

Med-High 1130 1045 1000 950 885 820 745 670

Med-Low 840 810 770 740 685 635 580 500

Low 725 730 740 745 730 715 690 665
High 2080 2040 1965 1865 1700 1575 1475 1335

Med-High 1890 1860 1770 1675 1550 1450 1330 1215

Med-Low 1555 1475 1395 1320 1210 1135 1050 940

Low 1220 1165 1080 1000 925 855 780 655

0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9

EXTERNAL STATIC PRESSURE IN. WC

SERVICE TRAINING

Packaged Service Training programs are an excellent way to increase your
knowledge of the equipment discussed in this manual, including:
 • Unit Familiarization • Maintenance
 • Installation Overview • Operating Sequence
A large selection of product, theory, and skills programs is available, using popular
video-based formats and materials. All include video and/or slides, plus companion
book.

Classroom Service Training plus "hands-on" the products in our labs can mean
increased confidence that really pays dividends in faster troubleshooting, fewer
callbacks. Course descriptions and schedules are in our catalog.


CALL FOR FREE CATALOG 1-800-962-9212



[ ] Packaged Service Training [ ] Classroom Service Training

A94328

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

UNIT MUST BE INSTALLED IN ACCORDANCE

WITH INSTALLATION INSTRUCTIONS

Cancels: PDS 367A.105.1B

© 1998 Bryant Heating & Cooling Systems, 7310 W. Morris St. Indpls, IN 46206 PRINTED IN U.S.A. Catalog No. 5236-700 1-98

—4—