Brother LS9294001 User Manual

Quick Setup Guide

FAX-878

Packing List

Make sure you have the items shown below.

Document Support	Paper Wire Extension
Power Cord	Paper Tray
(Example for Australia)
Telephone Line Cord	One Touch Name Label
Telephone Handset	User’s Guide
Handset Curled Cord
Telephone Line Cord Adapter	Quick Setup Guide
(For Australia only)

Keep the packing materials for possible future transport. If you do not pack the machine properly, it could damage your fax and may void your warranty.

Attach the paper wire extension and paper tray

1.Insert the document support into the openings as shown in the illustration.

2.Attach the paper wire extension.

3.Attach the paper tray.

Make sure the wide pins on the paper tray are inserted firmly into the pockets on the top edge of your machine.

Paper Wire

Extension

Paper Tray

Load the Paper

Place up to 30 (64 g/m2 - 90 g/m2) sheets of paper in the paper tray. Gently insert paper.

The side to be printed on must be face down.

Acceptable Paper

Size: A4

Weight: 64 to 90 g/m2

Thickness: 0.08 to 0.12 mm

Tap the stack of paper so the edges are even.

Connect the handset, power cord and telephone line cord

(Example for Australia)

Telephone Line Cord

1.Connect the handset.

2.Connect the power cord to the machine.

3.Plug the power cord into an electrical socket.

4.Connect the telephone line cord to the machine in the socket marked LINE.

If you are sharing one phone line with an external telephone answering device, connect it now as shown below.

TAD

(Example for	TAD
Australia)

Before you connect the external telephone answering machine, remove the protective film from the EXT. jack on the machine.

For more details, see Chapter 1, “Connecting an External Telephone Answering Device (TAD)” in the User’s Guide.

Set Date and Time

1.Press Menu/Set, 1, 2.

2.Enter the last two digits of the year, and then press Menu/Set.

3.Enter two digits for the month, and then press Menu/Set.

4.Enter two digits for the day, and then press Menu/Set.

5.Enter the time in 24-hour format, and then press Menu/Set.

6.Press Stop/Exit.

2.DATE/TIME ENTER YEAR:20--

ENTER MONTH:--

ENTER DAY:--

ENTER TIME:--:--

Set Station ID

1.Press Menu/Set, 1, 3.

2.Enter your fax number (up to 20 digits), and then press Menu/Set.

3.Enter your telephone number (up to 20 digits), and then press Menu/Set.

4.Enter your name (up to 20 characters) using the dial pad and the chart, and then press Menu/Set.

3.STATION ID FAX:

TEL:

NAME:

To enter a space press	▲
		Press	once	twice	three	four	five
twice.		Key			times	times	times

5. Press Stop/Exit.	2	A	B	C	2	A
	3	D	E	F	3	D
	4	G	H	I	4	G
	5	J	K	L	5	J
	6	M	N	O	6	M
	7	P	Q	R	S	7
	8	T	U	V	8	T
	9	W	X	Y	Z	9

Select Receive Mode

Choose the mode that best suits your needs by pressing Receive Mode repeatedly until the screen displays the setting you want to use.

	FAX ONLY	For use with a dedicated fax line. Every call
		is answered as a fax.
	FAX/TEL	For receiving fax and voice calls on one line.
	TAD:ANSWER MACH.	For use with an external answering device.
		The TAD answers every call and stores
		voice messages. Fax messages are printed.
	MANUAL	For receiving fax and voice calls on one line.
		You control the phone line and must answer
		every call yourself.

For more details, see Chapter 5, “Choosing the Receive Mode” in the User’s Guide.

ARL/ASA/NZ

LS9294001 Printed in Malaysia