Brother HL-L9200CDWT User Manual
1
2
3
4
1
2
3
HL-L9200CDW / HL-L9200CDWT
Quick Setup Guide
Unpack the machine and check the components
Drum Unit
(pre-installed)
Waste Toner Box
(pre-installed)
The latest manuals are available at Brother Solutions Center:
http://solutions.brother.com/.
Not all models are available in all countries.
Power Cord Quick Setup Guide
Version 0
ENG
Read the Product Safety Guide rst, and then read this Quick Setup
Guide for the correct installation procedure.
NOTE:
The components included in the box and the AC power plug •
connection may differ depending on your country.
The illustrations in this Quick Setup Guide are based on the •
HL-L9200CDW.
You must purchase the correct interface cable for the interface you •
want to use:
USB cable
We recommend using a USB2.0 cable (Type A/B) that is no more
than 6 feet (2 meters) long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable
for 10BASE-T or 100BASE-TX Fast Ethernet Network.
1
Toner Cartridges
(Black, Cyan, Magenta and Yellow;
pre-installed)
(pre-installed)
Remove the packing material from the machine
Product Safety GuideCD-ROMBelt Unit
2
3
Load paper in the paper tray
Adjust the paper guides.
Connect the power cord and turn on the machine
4
Select your language
Press
1.
Press your language.
2.
On the machine’s Touchpanel, press
3.
> General Setup > Local Language.
.
5
Conguration using the CD-ROM (Windows®)
For USB Connection
For Wired Network Connection
Connect a network cable rst.
Follow the on-screen instructions until
the Connection Type screen appears.
Follow the on-screen
instructions to continue
the installation.
Finish
For Wireless Network Connection
Wireless Network Connection
[Recommended]
Temporarily use a USB cable
for easy setup.
[Option]
Select if you do not have a USB cable.
NOTE:
If connection is unsuccessful, repeat this step.
Follow the on-screen
instructions to continue
the installation.
Finish
Conguration without using the CD-ROM (Windows
Download the full driver and software package from the Brother Solutions Center.
(For Windows®) solutions.brother.com/windows
(For Macintosh) solutions.brother.com/mac
Print using your mobile device
Print from your mobile devices using our free application “Brother iPrint&Scan”.
NOTE:
If connection is unsuccessful, repeat this step.
®
without CD-ROM drive or Macintosh)
Connect the machine and wireless LAN access point/router from the machine's Touchscreen.
1.
Press .
Download “Brother iPrint&Scan" to start using your machine with mobile devices.
2.
solutions.brother.com/ips
Press Setup Wizard. Press Yes for Wireless Network.
Select the specied SSID,
and then enter the Network key.
Finish
Loading...