Brother FA-V72A Owner's Manual

S-7200C

Basic Operation Manual

SINGLE NEEDLE DIRECT DRIVE STRAIGHT LOCK STITCHER WITH THREAD TRIMMER

Please read this manual before using the machine. Please keep this manual within easy reach for quick reference.

This basic operation manual describes basic operations including sewing machine operations. For cleaning, standard adjustments and more details, please refer to the instruction manual contained in the Document CD.

Thank you very much for buying a BROTHER sewing machine. Before using your new machine, please read the safety instructions and the explanations given in the instruction manual.

With industrial sewing machines, it is normal to carry out work while positioned directly in front of moving parts such as the needle and thread take-up, and consequently there is always a danger of injury that can be caused by these parts. Follow the instructions from training personnel and instructors regarding safe and correct operation before operating the machine so that you will know how to use it correctly.

S-7200C

SAFETY INSTRUCTIONS

[1] Safety indications and their meanings

This instruction manual and the indications and symbols that are used on the machine itself are provided in order to ensure safe operation of this machine and to prevent accidents and injury to yourself or other people. The meanings of these indications and symbols are given below.

Indications

DANGER

CAUTION

Symbols

· · · · ·

The instructions which follow this term indicate situations where failure to follow the instructions will result in death or serious injury.

The instructions which follow this term indicate situations where failure to follow the instructions could cause injury when using the machine or physical damage to equipment and surroundings.

This symbol ( ) indicates something that you should be careful of. The picture inside the triangle indicates the nature of the caution that must be taken. (For example, the symbol at left means “beware of injury”.)

This symbol ( ) indicates something that you must not do.

This symbol ( ) indicates something that you must do. The picture inside the circle indicates the nature of the thing that must be done. (For example, the symbol at left means “you must make the ground connection”.)

S-7200C

i

[2] Notes on safety

Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet before opening the cover of the control box. Touching areas where high voltages are present can result in severe injury.

DANGER

CAUTION

Environmental requirements

Use the sewing machine in an area which is free from sources of strong electrical noise such as electrical line noise or static electric noise. Sources of strong electrical noise may cause problems with correct operation.

Any fluctuations in the power supply voltage should be within ±10% of the rated voltage for the machine. Voltage fluctuations which are greater than this may cause problems with correct operation.

The power supply capacity should be greater than the requirements for the sewing machine's power consumption. Insufficient power supply capacity may cause problems with correct operation.

Machine installation should only be carried out by a qualified technician.

Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done.

The sewing machine weighs more than 45 kg. The installation should be carried out by two or more people.

Do not connect the power cord until installation is complete. The machine may operate if the treadle is depressed by mistake, which could result in injury.

Turn off the power switch before inserting or removing the plug, otherwise damage to the control box could result.

Be sure to connect the ground. If the ground connection is not secure, you run a high risk of receiving a serious electric shock, and problems with correct operation may also occur.

When securing the cords, do not bend the cords excessively or fasten them too hard with staples, otherwise there is the danger that fire or electric shocks could occur.

The ambient temperature should be within the range of 5°C to 35°C during use. Temperatures which are lower or higher than this may cause problems with correct operation.

The relative humidity should be within the range of 45% to 85% during use, and no dew formation should occur in any devices. Excessively dry or humid environments and dew formation may cause problems with correct operation.

In the event of an electrical storm, turn off the power and disconnect the power cord from the wall outlet. Lightning may cause problems with correct operation.

Installation

If using a work table which has casters, the casters should be secured in such a way so that they cannot move.

Secure the table so that it will not move when tilting back the machine head. If the table moves, it may crush your feet or cause other injuries.

Use both hands to hold the machine head when tilting it back or returning it to its original position. If only one hand is used, the weight of the machine head may cause your hand to slip, and your hand may get caught.

Be sure to wear protective goggles and gloves when handling the lubricating oil and grease, so that they do not get into your eyes or onto your skin, otherwise inflammation can result. Furthermore, do not drink the oil or eat the grease under any circumstances, as they can cause vomiting and diarrhea. Keep the oil out of the reach of children.

ii

S-7200C

CAUTION

Sewing

This sewing machine should only be used by operators who have received the necessary training in safe use beforehand.

The sewing machine should not be used for any applications other than sewing.

Be sure to wear protective goggles when using the machine. If goggles are not worn, there is the danger that if a needle breaks, parts of the broken needle may enter your eyes and injury may result.

Turn off the power switch at the following times. The machine may operate if the treadle is depressed by mistake, which could result in injury.

y When threading the needle y When replacing the bobbin and needle y When not using the machine and when leaving

the machine unattended

If using a work table which has casters, the casters should be secured in such a way so that they cannot move.

Turn off the power switch before carrying out cleaning. The machine may operate if the treadle is depressed by mistake, which could result in injury.

Secure the table so that it will not move when tilting back the machine head. If the table moves, it may crush your feet or cause other injuries.

Use both hands to hold the machine head when tilting it back or returning it to its original position. If only one hand is used, the weight of the machine head may cause your hand to slip, and your hand may get caught.

Attach all safety devices before using the sewing machine. If the machine is used without these devices attached, injury may result.

Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine.

Secure the table so that it will not move when tilting back the machine head. If the table moves, it may crush your feet or cause other injuries.

Use both hands to hold the machine head when tilting it back or returning it to its original position. If only one hand is used, the weight of the machine head may cause your hand to slip, and your hand may get caught.

If an error occurs in machine operation, or if abnormal noises or smells are noticed, immediately turn off the power switch. Then contact your nearest Brother dealer or a qualified technician.

If the machine develops a problem, contact your nearest Brother dealer or a qualified technician.

Cleaning

Be sure to wear protective goggles and gloves when handling the lubricating oil and grease, so that they do not get into your eyes or onto your skin, otherwise inflammation can result. Furthermore, do not drink the oil or eat the grease under any circumstances, as they can cause vomiting and diarrhea. Keep the oil out of the reach of children.

Use only the proper replacement parts as specified by Brother.

Maintenance and inspection

Maintenance and inspection of the sewing machine should only be carried out by a qualified technician.

Ask your Brother dealer or a qualified electrician to carry out any maintenance and inspection of the electrical system.

Turn off the power switch and disconnect the power cord from the wall outlet at the following times, otherwise the machine may operate if the treadle is depressed by mistake, which could result in injury.

y When carrying out inspection, adjustment and

maintenance

y When replacing consumable parts such as the

rotary hook

If the power switch needs to be left on when carrying out some adjustment, be extremely careful to observe all safety precautions.

S-7200C

Secure the table so that it will not move when tilting back the machine head. If the table moves, it may crush your feet or cause other injuries.

Use both hands to hold the machine head when tilting it back or returning it to its original position. If only one hand is used, the weight of the machine head may cause your hand to slip, and your hand may get caught.

Use only the proper replacement parts as specified by Brother.

If any safety devices have been removed, be absolutely sure to re-install them to their original positions and check that they operate correctly before using the machine.

Any problems in machine operation which result from unauthorized modifications to the machine will not be covered by the warranty.

iii

[3] Warning labels

The following warning labels appear on the sewing machine. Please follow the instructions on the labels at all times when using the machine. If the labels have been removed or are difficult to read, please contact your nearest Brother dealer.

1

2

3

Touching areas where high voltages are present can result in severe injury. Turn off the power before opening the cover.

4

5

Be careful not to get your hands caught when returning the machine head to its original position after it has been tilted.

Be careful to avoid injury from the moving thread take-up.

* Safety devices: (A) Finger guard

(B) Thread take-up cover

Oil pan

Control box

Transformer box (100 V/400 V system only)

Be sure to connect the ground. If

6

7

the ground connection is not secure, you run a high risk of receiving a serious electric shock, and problems with correct operation may also occur.

Direction of operation

4123M

iv

S-7200C

1. CONVENIENT FUNCTION FOR SMOOTH SEWING

Thread take-up amount can be adjusted Lower thread counter (When using the G50 operation panel)

INSTRUCTION MANUAL CD 10-4. Adjusting the thread take-up amount

When sewing heavy materials, the thread tension can be adjusted more easily if the thread take-up amount is set to a larger amount. (-[][]3 specifications only)

Actuator switch

INSTRUCTION MANUAL CD 13-1. Adjusting the actuator switch

osition

The installation position for the actuator switch can be adjusted to <A> or <B>. Adjust so that it is in a position where it is easy to operate.

Maximum presser foot lift amount 16 mm

The knee lifter and the needle up stop (reverse rotation) function together provide 16 mm of space underneath the presser foot. This makes it much easier to insert and remove heavy material without it getting caught on the needle.

(Contact the place of purchase.)

4314M

4316M

INSTRUCTION MANUAL CD 5-7. Using the lower thread counter

The graphic display lights and a buzzer sounds before the bobbin thread runs out, so that the operator can concentrate on the job with confidence.

Easy setting of sewing speed from operation panel

< When using the G50 operation panel >

Page 21

The sewing speed can be adjusted using the sewing speed control keys.

< When using the G10 operation panel > INSTRUCTION MANUAL CD

8-5. Setting the maximum sewing speed

The sewing speed can be adjusted using the MAX key.

Selectable starting speed

The sewing speed at the sewing start can be selected in accordance with the treadle depression amount. You can set the speed according to the preferences of the operator.

(Contact the place of purchase.)

Condensed stitching

INSTRUCTION MANUAL CD 9-3. Sewing condensed stitches

This feature is ideal for use when sewing thin materials that can easily pucker when reverse stitches are sewn. Condensed stitches have a smaller sewing pitch and they help prevent fraying.

Sewing direction

Condensed stitches

3165M

Floating presser foot for easy handling

INSTRUCTION MANUAL CD 13-12. Adjusting the presser foot floating amount

A micro-adjustable type floating presser foot is equipped as standard. This device is ideal for controlling presser foot floating in materials that stretch easily and materials with long pile. It prevents seam slippage and also prevents damage to the material. In addition, three-dimensional articles with irregular curves can also be handled with ease.

3721M

1

S-7200C

2. NAMES OF MAJOR PARTS

G50 operation panel (advanced function LCD)

G10 operation panel (basic function LED)

(1) Bobbin winder (2) Thread wiper (-4[][] specifications) (3) Lifting lever (4) Actuator switch (5) Presser foot (6) Knee lifter assembly (7) Power switch (8) Oil gauge window (-[]0[], []3[] specifications) (9) Reverse lever (10) Stitch length dial

(11)

Oil feeding pocket (-[]0[]・[]3[]specifications)

(13) Operation panel (14) Cotton stand

(15) Control box

Safety devices

(16) Thread take-up cover (17) Finger guard

(12) Machine pulley

4124M

S-7200C

2

3. INSTALLATION

CAUTION

Machine installation should only be carried out by a qualified technician.

Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done.

The sewing machine weighs more than 45 kg. The installation should be carried out by two or more people.

Do not connect the power cord until installation is complete. The machine may operate if the treadle is depressed by mistake, which could result in injury.

About the machine set-up location

 Do not set up this sewing machine near other equipment such as

televisions, radios or cordless telephones, otherwise such equipment may be affected by electronic interference from the sewing machine.

 The sewing machine should be plugged directly into an AC wall

outlet. Operation problems may result if extension cords are used.

Carrying the machine

 The machine should be carried by the arm by two people as

shown in the illustration.

* Hold the motor cover (A) by hand also so that the pulley does

not rotate.

Secure the table so that it will not move when tilting back the machine head. If the table moves, it may crush your feet or cause other injuries.

Use both hands to hold the machine head when tilting it back or returning it to its original position. If only one hand is used, the weight of the machine head may cause your hand to slip, and your hand may get caught.

2086M

4125M

Tilting back the machine head

 Hold section (B) with your foot so that the table does not move,

and then push the arm with both hands to tilt back the machine head.

Returning the machine head to the upright position

1. Clear away any tools, etc. which may be near the table holes.

2. While holding the face plate with your left hand, gently return the machine head to the upright position with your right hand.

3

S-7200C

2088M

2089M

Brother FA-V72A Owner's Manual

SAFETY INSTRUCTIONS

CONTENTS

1. CONVENIENT FUNCTION FOR SMOOTH SEWING

2. NAMES OF MAJOR PARTS

3. INSTALLATION