Broan RML4554S Dimension Guide

RML3336, RML3336S,
RML3342, RML3342S,
RML4548, RML4548S,

SPECIFICATION SHEET

RML4554S, RML4560

HA0025

AND RML 4560S LINERS

Especially designed to protect the exterior base of
a custom hood. Fit RMIP inserts.

FEATURES

Cabinet mount _ custom application

•

Stainless Steel Finish

•

Adjustable depth to fit into cabinet openings as shown in

•

chart (front to back)
Fit custom hood nominal widths: 36’’, 42’’, 48’’, 54” or 60’’

•

Wipes clean easily

•

TO ORDER

Refer to table below to find the right liner part number for
your insert and for width of the custom hood.

DIMENSIONS

Liner Model Insert Model Custom Hood Adjustable Depth* Cut-out

Nominal Width Fits into cabinet openings of Width A* Width B

Without Backboard With Backboard
RML3336 RMIP33 36” 23 1/2” to 26 1/2” 23 1/8” to 26 1/8” 34 3/8” 32 1/2”
RML3342 RMIP33 42” 23 1/2” to 26 1/2” 23 1/8” to 26 1/8” 40 3/8” 32 1/2”
RML4548 RMP45 48” 23 1/2” to 26 1/2” 23 1/8” to 26 1/8” 46 3/8” 44 1/2”
RML4560 RMIP45 60” 23 1/2” to 26 1/2” 23 1/8” to 26 1/8” 58 3/8” 44 1/2”

RML3336S RMIP33 36” 22 7/8” to 25 7/8” 22 1/2” to 25 1/2” 34 3/8” 32 1/2”
RML3342S RMIP33 42” 22 7/8” to 25 7/8” 22 1/2” to 25 1/2” 40 3/8” 32 1/2”
RML4548S RMIP45 48” 22 7/8” to 25 7/8” 22 1/2” to 25 1/2” 46 3/8” 44 1/2”
RML4554S RMIP45 54” 22 7/8” to 25 7/8” 22 1/2” to 25 1/2” 52 3/8” 44 1/2”
RML4560S RMIP45 60” 22 7/8” to 25 7/8” 22 1/2” to 25 1/2” 58 3/8” 44 1/2”

17-1/16”

4”

Adjustable Depth*

(See Chart)

* Dimension does not include 3/8’’ wide flange.

B

3-1/2”

16-3/8”

A*

The INSIDE DEPTH shown in the table above assumes a minimum cabinet backboard thickness of 3/8”.

Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)

NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227 (1-800-543-8687)

Broan-NuTone Canada, Inc., 1140 Tristar Drive, Mississauga, Ontario, L5T 1H9 (1-888-882-7626)

REFERENCE QTY. REMARKS Project

Location
Architect
Engineer
Contractor
Submitted by Date

70E 99043304D