Page 1
RMIP SERIES
4 1/2''
6 3/8''
HC0010
HK0076A
HB0032
HA0026
4”
Adjustable depth
(See liner spec
sheet for details)
Fits custom hood nominal
width 36”, 42”, 48”, 54” or 60
”
INSERT
Especially designed to be installed in custom hood
fo r use over re sidenti al com mercial-s tyle
cooking surfaces.
A complete installation requires several optional
components. Refer to page 2 when planning your
installation.
FEATURES
Cabinet mount _ custom application
•
Widths: 33’’, 45’’
•
Halogen lighting (33’’_ 2 x 50 watt; 45’’_ 3 x 50 watt PAR20)
•
Lamps not included
Controls: rocker switches for lighting and on-off,
•
knob for infinite speed
Heat Sentry™ turns blower ON to HIGH speed when
•
excess heat is detected
OPTIONS
Custom hood liners (RML33 or RML45 Series):
•
Widths - 36’’, 42’’, 48’’, 54” and 60’’
Adjustable depth - see liner spec. sheet for details
Stainless Steel construction - protects custom hood base
and wipes clean easily
Dishwasher-safe stainless steel baffle filters RBFIP
•
Series
Backsplash (RMP Series):
•
Widths - 36’’, 42” 48”, 60”
Stainless Steel construction - protects back wall
and wipes clean easily
RMIPWC Remote control: With Stainless Steel faceplate,
•
to fit any décor.
SPECIFICATION SHEET
Mount insert so bottom of custom hood is 24’’ to 30’’ above
cooking surface.
Custom Hood Liner
RML33 or RML45 Series
RMIPWC Remote Control
Baffle Filters
RBFIP Series
Backsplash
RMP Series
INSERT SPECIFICATIONS
120 Vac, 60 Hz
•
Amps (without blower): 0.8 (RMIP33) 1.3 (RMIP45)
•
For indoor use only.
•
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
Broan-NuTone Canada Mississauga, Ontario www.broan.ca 877-896-1119
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
01G 99043303G
Page 2
RMIP MOUNTING
HH0040A
1 1/2”
HD0093A
17 1/16''
16 3/8''
32 1/2'' or 44 1/2''
3 1/2''
2 1/4'' min.
3/4’’
3 1/4’’
16 1/8’’
7 5/8’’
7/8’’
14’’
9 1/8’’
7/8’’ dia.
8’’ round
transition
HK0031A
3/4’’
3 1/4’’
16 1/8’’
7 5/8’’
7/8’’
10’’
11 1/8’’
7/8’’ dia.
7’’ or 8’’
round transition
HK0030A
5 1/4’’
16 1/8’’
9 5/8’’ dia.
7/8’’ dia.
1 11/16’’
6 11/16’’
HK0029
3 1/4’’
22 1/8’’
13 5/8’’
7/8’’
3/4’’
15 1/8’’
14’’
7/8’’ dia.
8’’ round
transition
HK0034A
3 1/4’’
22 1/8’’
13 5/8’’
7/8’’
3/4’’
17 1/8’’
10’’
7/8’’ dia.
7’’ or 8’’
round transition
HK0033A
5 1/4’’
22 1/8’’
12 11/16’’
1 11/16’’
9 5/8’’ dia.
7/8’’ dia.
HK0032
NOTE: If optional RML series liner is used, refer to installation
Size of the cut-out
instructions for size and location of the cut-out.
NOTE: The 3 1/2’’ notch must be cut only if the RMIPWC
optional wall control will be installed.
RMIP SERIES INSERTS
BLOWER DUCTING
POSITIONS
Suggested Custom Hood Internal Framework
HB0032
MODEL RMIP33 WITH P8 BLOWER (Vertical Outlet)
Top view
MODEL RMIP33 WITH P5 BLOWER (Vertical Outlet)
Top view
MODEL RMIP33 WITH 331H, 332H, 335, 336, HLB3,
HLB6, HLB9 OR HLB11 BLOWER (Vertical Outlet)
Top view Top view
MODEL RMIP45 WITH P8 BLOWER (Vertical Outlet)
Top view
MODEL RMIP45 WITH P5 BLOWER (Vertical Outlet)
Top view
MODEL RMIP45 WITH 331H, 332H, 335, 336, HLB3,
HLB6, HLB9 OR HLB11 BLOWER (Vertical Outlet)
Page 3
- RMIP33 AND RMIP45 INSERT SYSTEM -
INTERIOR BLOWERS
Model 647
(7” Rd wall cap)
Model 415
7” Rd adjustable
elbow (optional)
Model 407
(7” Rd x 24’’
7” Rd metal
flexible duct
Model 412
1
(3
/4” x 10” to 7”)
Adapter and damper 3
(supplied with P5 and P8 blowers)
section)
(optional)
transition
(supplied with
(3
1
/
4’’ x 10’’
Flow deviator
P5 and P8 blowers)
Model 634 or 644
(roof cap)
Model 413
transition
1
/4” x 10” to 8”)
Model 459
1
(3
/4” x 14” to 8”)
Adapter and damper 3
(supplied with P8 blower)
8” Rd
adjustable
elbow (optional)
8” Rd
standard
duct
8” Rd metal
flexible duct
(optional)
transition
1
/4’’ x 14’’
Model 643
(8” Rd wall cap)
RMIPWC
Wall control
(Optional)
RBFIP Series
Baffle Filters
(Optional)
Model P5
single-blower
(500 cfm)
RMP Series Backsplash
(Stainless Steel wall
covering with warming
shelves. Optional)
RML3336S, RML3342S,
RML4548S, RML4554S or
RML4560S
Custom Hood Liner (optional)
RMIP33
OR RMIP45
INSERT
Rough-in kit
(supplied with P5 and P8 blowers)
Model P8
dual-blower (900 cfm)
NOTE: The dual blower P8 can be
installed either with 7’’ round
or 8’’ round ductwork.
For optimal air and quiet sound
performance,use 8’’round ductwork.
HL0067
Page 4
- RMIP33 AND RMIP45 INSERT SYSTEM -
IN-LINE AND EXTERIOR BLOWERS
(High capacity roof cap)
(10” Rd wall cap)
(includes two 4½” x 18½”
Model HLB3 (280 cfm)
in-line blower
(includes one 8” to 10”
round transition)
Model 437
Model 441
Model HLB6 (600 cfm)
in-line blower
to 10’’ round transitions)
adjustable elbow
Model HLB9 (800 cfm)
or HLB11 (1100 cfm)
in-line blower
(includes two 8” x 12” to
10’’ round transitions)
Model 418
10” Rd
(optional)
(10” Rd wall cap)
Model 410
(10” Rd duct
- 2ft. sections)
Model 441
Model 335 (1200 cfm)
Model 331H (600 cfm)
or 332H (900 cfm)
exterior blower
Model 421
(10” Rd. vert.
in-line damper)
Recommended
for use with
exterior blowers
or 336 (1500 cfm)
exterior blower
RMIPWC
Wall control
(Optional)
RBFIP Series
Baffle filters
(Optional)
RMP Series Backsplash
(Stainless Steel wall
covering with warming
shelves. Optional)
10” Rd metal
flexible duct
(optional)
RML3336S, RML3342S,
RML4548S, RML4554S or
RML4560S
Custom Hood Liner (optional)
RMIP33
INSERT
OR RMIP45
332KR in-line and exterior blower
rough-in kit - Purchase separately.
HL0068
Loading...