Broan RM659004 Specifications
RM65000 SERIES
SPECIFICATION SHEET
(
)
RANGE HOOD
A wall-mounted chimney hood with a hand-drafted
design that blends curved and angular surfaces to
form a stunning union of stainless steel and glass.
FEATURES
Professional style design
•
202 Stainless Steel construction
•
Wall mount installation
•
Seamless corners for easy cleaning
•
Ducted telescopic flue - fits 8 ft. to 9 ft. ceilings
•
6” round duct connector/backdraft damper
•
450 cfm centrifugal blower
•
Advanced multi-speed electronic push-button control with
•
10-minute delay shut-off
Two-level halogen lighting and a low nighttime setting
•
(2 x 20 Watt, Type MR16 - bulbs included)
Dishwasher-safe aluminum filter features a quick-release
•
latch and professional style appearance
Time to clean filter indicator
•
Available sizes: 35-7/16” (90cm)
•
Heat SentryTM - automatically turns blower to high speed
•
when excess cooking heat is detected
OPTIONS
Replacement grease filters available
•
Flue Extension for 10 ft. ceiling
•
(Model RFX6504) (32¼” Long)
TYPICAL SPECIFICATION
Range hood shall be Broan Model RM65000.
Unit shall be for indoor use only.
Motor to be permanently lubricated.
Unit shall have four-speed fan switch with delay shut-off and
separate light switch.
Unit shall have a flashing control light to indicate when it’s
time to clean the washable aluminum filter.
Sides shall be mitered and bottom edge hemmed - with no
sharp edges.
Air delivery shall be no less than 450 CFM.
Unit shall be U.L. and
cUL listed.
SPECIFICATIONS
VOLTS AMPS CFM SONES DUCT
120 3.13 450 9.0 6” round
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
Broan-NuTone Canada Mississauga, Ontario www.broan.ca 877-896-1119
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
90M 99043165G
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed by the
Home Ventilating Institute, for off-the-shelf products, as
they are available to consumers. Product performance
is rated at 0.1 in. static pressure, based on tests
conducted in a state-of-the-art test laboratory. Sones
are a measure of humanly-perceived loudness, based
on laboratory measurements.
RM65000 SERIES WIRING
8½”
4¼”
CENTERLINE OF
HOOD & DUCT
RM65000 SERIES MOUNTING
120-VOLT, 60 HZ, GROUNDED WALL OUTLET
OFFSET FROM DUCT CENTER LINE
(STAY WITHIN 8½” DIMENSION)
21” - 27”
FRAMING BEHIND
WOOD CROSS
SUPPORT
WOOD CROSS SUPPORT –
SECURED TO FRAMING AND
LOCATED BEHIND DRYWALL
DRYWALL
GNILIEC
THGIEH
TEEF8 "8/5-72 "8/5-82 "8/5-92
TEEF9 "8/5-92 "8/5-03 "8/5-13 "8/5-23 "8/5-33
TEEF01
"42 "52 "62 "72 "82 "92 "03
"8/5-92 "8/5-03 "8/5-13 "8/5-23 "8/5-33
L
C
L
13
10 "
16
( )
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
Broan-NuTone Canada Mississauga, Ontario www.broan.ca 877-896-1119
)ETONEES(POTKOOCHGIH"63EVOBAECNATSIDDOOH
POTKOOCHGIH"63EVOBANOITACOLTEKCARBGNITNUOM
MOUNTING
BRACKET LOCATION
(ABOVE 36” HIGH
COOKTOP)
NOTE: Minimum hood distance
above cooktop must not be less
than 24”.
A maximum of 30” above the
cooktop is highly recommended
for best capture of cooking
impurities.
Distances over 30” above the
cooktop are at the installer’s and
user’s discretion - providing that
ceiling height and flue length
permit.
Loading...