Broan AE50110DCS Specifications

MODEL AE50110DCS
FLEX DC
SERIES
HUMIDITY SENSING FAN
TM
A modern-styled, high performance fan, with sensing circuitry, that "knows" when to ventilate the room.
FEATURES
BLOWER:
• Plug-in, permanently lubricated, brushless DC motor ­engineered for continuous operation
• Dynamically balanced centrifugal blower wheel for quiet, efficient performance
• Low RPM for quiet operation
• Selectable settings of 50, 80 or 110 CFM
HOUSING:
• Rugged, 26 gauge, galvanized steel construction
• Polymeric, 4” damper / duct connector with tapered sleeve and no metallic clatter
• 5-3/4” height allows for 2” x 6” ceiling installations
• Sturdy, easy, four-point mounting directly to joist
• Optional snap-on flange kit
GRILLE:
• Polymeric construction
• Innovative design - the result of extensive research with designers and consumers
AUTOMATIC CONTROL:
• Humidity control automatically turns fan ON when either of these conditions is detected:
- a rapid to moderate (user adjustable) increase of humidity
- humidity above user-adjustable set-point (50%-80% RH)
• Two wire manual operation for odor control - Turns fan ON when power line through wall switch is cycled ON, OFF and back ON
• Remains ON for a user-adjustable 5 to 60 minutes after humidity has stabilized and is below set-point or after manually initiated through power line cycling
• Saves energy because unit runs only for the time required. A unit controlled with a wall timer may keep fan ON longer than required or turn it OFF before room is sufficiently ventilated
Broan Hartford, Wisconsin www.broan.com 800-558-1711
Venmar Ventilation ULC Drummondville (Quebec), Canada www.broan.ca 877-896-1119
cULus Listed for use over bathtubs and showers when connected to a GFCI protected branch circuit (ceiling mount only)
Acceptable for use in insulated ceilings (Type I.C.) 3-Year Warranty
TYPICAL SPECIFICATION
Fan shall be Broan Model AE50110DCS. Fan shall have corrosion resistant galvanized steel housing
with four-point mounting capability. It shall be ducted to a roof or wall cap using 4” round ductwork.
Blower assembly shall be removable, have a centrifugal blower wheel and a permanently lubricated brushless DC motor designed for continuous operation.
Non-metallic damper/duct connector shall be included. Air delivery shall be no less than the airflow values and
no greater than the sound level values listed in the HVI Performance Ratings provided in this specification (see following chart). All air and sound ratings shall be certified by HVI.
Fan shall be acceptable for use in insulated ceilings (Type I.C.) and cULus Listed for use over bathtubs and showers when connected to a GFCI protected branch circuit.
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
91D 1100249D
PERFORMANCE RATINGS - MODEL AE50110DCS FLEX DCTM SERIES HUMIDITY SENSING FAN
HVI PERFORMANCE
Speed
Setting
50
80
110
Static Pressure (In. H2O)
Airow
(CFM)
Sound
(Sones)
0.1 50 < 0.3 3.4 14.7
0.25 36 0.5 5.3 6.7
0.1 80 0.4 6.5 12.6
0.25 71 0.9 9.4 7.6
0.1 110 0.9 10.6 10.4
0.25 105 1.4 14.9 7.0
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted in a state-of-the-art test laboratory. Sones are a measure of humanly-perceived loudness, based on laboratory measurements.
ELECTRICAL & WEIGHT
Volts Hz Amps
120 60 0.3 8.5 lb.
Shipping
Weight
Power
(Watts)
Efcacy
(CFM/W)
AIR FLOW PERFORMANCE
50 CFM Setting
0.6
0.5
0.4
0.3
Static Pressure
0.2
O -Inches of Water Gauge)
2
0.1
(In. H
0.0 0 10 20 30 40 50 60
Airflow (CFM - Cubic Feet per Minute)
80 CFM Setting
0.7
0.6
0.5
0.4
0.3
Static Pressure
O - Inches of Water Gauge)
2
0.2
(In. H
0.1
0.0 0 10 20 30 40 50 60 70 80 90
Airflow (CFM - Cubic Feet per Minute)
110 CFM Setting
0.8
0.7
0.6
0.5
0.4
0.3
Static Pressure
O - Inches of Water Gauge)
2
0.2
(In. H
0.1
0.0 0 10 20 30 40 50 60 70 80 90 100 110 120
Airflow (CFM - Cubic Feet per Minute)
Broan Hartford, Wisconsin www.broan.com 800-558-1711 Venmar Ventilation ULC Drummondville (Quebec), Canada www.broan.ca 877-896-1119
Loading...
+ 2 hidden pages