WOOD HOOD
KIT
SPECIFICATION SHEET
A hard working hood that won't interrupt the natural
beauty of your wood cabinets.
FEATURES
Dual centrifugal blower
•
Fire retardant, all metal insert
•
Infinite speed control
•
Energy efficient 24 inch fluorescent light (bulb not
•
included)
Built-in damper/duct connector - vertical or horizontal
•
discharge
Exclusive Heat Sentry™ — automatically turns blower
•
on to high speed when excess cooking heat is detected
Fits 30" wood hoods with interiors 28-1/4" to 28-7/8"
•
36" installations require addition of liners 97009790, sold
•
separately, and fits hood interior 34-1/4" to 34-7/8".
Installations up to 42" require additional metal liners/
•
fillers. (See installation manual.)
Uses Model 103123 Rough-in Kit
•
SPECIFICATIONS
VOLTS AMPS RPM
120 3.7 1580 5.0 4.5 360 3¼" X 10"
* Horizontal ratings acheived using 3¼" x 10" duct and a 900 elbow.
SONES
VERT. HOR. *
VERT. & HOR. *
CFM
TYPICAL SPECIFICATION
Wood Hood Kit shall be Broan Model 103023.
Kit shall have all-metal construction and fit in a Wood Hood
up to 42 inches wide. Damper/duct connector to be included).
Unit shall have infinite speed control, fluorescent light and
dual centrifugal blower. Blower to automatically turn on to
HIGH speed when excess cooking heat is detected.
Air delivery shall be no less than 360 CFM and sound level
no greater than 4.5 Sones (horizontal discharge), 5.0 Sones
(vertical discharge). All air and sound ratings to be certified
by HVI. Unit to be U.L. listed.
Use 3¼" x 10" duct and a 900
elbow to exhaust horizontally.
DUCT
HVI-2100 CERTIFIED RATINGS comply with new testing technologies
and procedures prescribed by the Home Ventilating Institute, for
off-the-shelf products, as they are available to consumers. Product
performance is rated at 0.1 in. static pressure, based on tests
conducted in a state-of-the-art test laboratory. Sones are a measure
of humanly-perceived loudness, based on laboratory measurements.
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-637-1453
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
51M 99041105D
34-1/4 min. - 34-7/8 max.
with 97009790.