Breville Kitchen Wizz Pro BFP800 Instruction Booklet
BFP800
the Kitchen Wizz Pro
™
Instruction Booklet
CONGRATULATIONS
on the purchase of your new
Breville Kitchen Wizz Pro
™
3
CONTENTS
4 Breville recommends safety first
7 Know your Breville
Kitchen Wizz Pro™
10 Assembling your Breville
Kitchen Wizz Pro™
15 Basic processing techniques
– Pureeing with the
QUAD
‰
blade
– Mixing and whipping with
the QUAD
‰
blade
– Slicing, shredding and
grating with the multi function Discs
28 Food processing at a glance
– Processing tips
34 Care, cleaning & storage
37 Troubleshooting
40 Recipes
4
BREVILLE RECOMMENDS SAFETY FIRST
At Breville we are very safety conscious. We design and manufacture consumer products
with the safety of you, our valued customer, foremost in mind. In addition we ask that you
exercise a degree of care when using any electrical appliance and adhere to the following
precautions.
READ ALL INSTRUCTIONS
BEFORE USE AND SAVE FOR
FUTURE REFERENCE
• Carefully read all instructions before
operating and save for future reference.
• Remove any packaging material and
promotional labels before using the food
processor for the first time.
• Do not place the food processor near
the edge of a bench or table during
operation. Ensure the surface is level,
clean and free of water, flour, etc.
Vibration during operation may cause
the appliance to move.
• Do not place this appliance on or near
a hot gas or electric burner, or where it
could touch a heated oven.
• Handle the food processor and
attachments with care - remember the
blades and discs are razor-sharp and
should be kept out of reach of children.
• Always make sure the food processor is
completely assembled before operating.
The appliance will not operate unless
properly assembled.
• Ensure the OFF button has been
pressed, and the food processor is
switched off at the power outlet and
unplugged before attaching the quad
blade, dough blade, disc or
processing lid.
• Always secure the processing bowl onto
the motor base before attaching the
quad blade, dough blade or discs.
• Always operate the food processor with
the processing lid securely in position.
• Do not push food into the feed chute
with your fingers or other utensils.
Always use the food pusher provided.
• Keep hands, knives and other utensils
away from moving quad blade, dough
blade or discs.
• Do not place hands or fingers in the
bowl of the food processor unless the
motor, quad blade, dough blade or discs
have come to a complete stop.
• Ensure the OFF button has been pressed
to switch the motor off and the appliance
is switched off at the power outlet and
unplugged before removing the lid from
the bowl.
• Do not use attachments other than those
provided with the food processor.
• Do not attempt to operate the food
processor by any method other than
those described in this booklet.
• Ensure the motor, blades or discs
have completely stopped before
disassembling. Ensure the OFF button
has been pressed and the appliance
is switched off at the power outlet
and unplugged when not in use, if left
unattended and before disassembling,
cleaning or storing.
• Care should be taken when removing
the food from the processing bowl by
ensuring the motor, quad blade, dough
blade or disc, have completely stopped
before disassembling. Ensure the OFF
button has been pressed to switch the
motor off; the appliance is switched
off at the power outlet and unplugged,
before removing the lid from the bowl.
The processing bowl should then be
unlocked from the motor body and
the quad blade, dough blade or discs
carefully removed before attempting to
remove the processed food.
IMPORTANT SAFEGUARDS
5
BREVILLE RECOMMENDS SAFETY FIRST
5
• Please do not crush ICE in the large or
small processing bowls. This will cause
damage to the blades (quad or mini
blade). We recommend that you use a
blender for ice crushing.
• Some stiff mixtures, such as dough
may cause the processing blade to
rotate more slowly than normal. If this
happens, do not process for longer than
1 minute.
• Do not process hot or boiling liquids -
allow liquids to cool before placing into
the processing bowl.
• Do not use the food processor on
slippery, unstable or uneven surfaces
such as a sink drain board.
• To protect against electric shock do not
immerse power cord, plug or motor base
in water or any other liquid.
• Do not move the food processor whilst
in operation.
• Do not leave the food processor
unattended when in use.
• Do not place any part of the food
processor in the microwave oven.
• Do not fill bowl above marked liquid
levels or 15 cup Dry level (shredding).
Always add drier or thicker ingredients
to the processing bowl prior to
adding fluids.
• Never remove the lid while the processor
is operating. Always use the
POWER/OFF button to stop the
machine before removing the lid.
• Keep the appliance clean. Follow the
cleaning instructions provided in
this book.
6
BREVILLE RECOMMENDS SAFETY FIRST
IMPORTANT SAFEGUARDS FOR
ALL ELECTRICAL APPLIANCES
• Unwind the power cord fully before use.
• Do not let the power cord hang over
the edge of a table, counter, touch hot
surfaces or become knotted.
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure
they do not play with the appliance.
• It is recommended to regularly inspect
the appliance. Do not use the appliance
if power supply cord, plug or appliance
becomes damaged in any way. Return
the entire appliance to the nearest
authorised Breville Service Centre for
examination and/or repair.
• Any maintenance other than cleaning
should be performed at an authorised
Breville Service Centre.
• This appliance is for household use only.
Do not use this appliance for anything
other than its intended use. Do not use
in moving vehicles or boats.
Do not use outdoors.
• The installation of a residual current
device (safety switch) is recommended
to provide additional safety protection
when using electrical appliances. It
is advisable that a safety switch with
a rated residual operating current
not exceeding 30mA be installed in
the electrical circuit supplying the
appliance. See your electrician for
professional advice.
CAUTION
To avoid possible malfunction of the
processing bowl’s auto switch, do not
place the processing lid in the locked
position when the appliance is not
in use.
CAUTION
The processing blades and discs are
extremely sharp, handle with care at
all times. Do not place hands, knives
or other utensils into the feed chute.
Always use the food pusher to push the
food down the feed chute.
SAVE THESE
INSTRUCTIONS
KNOW
your Breville Kitchen Wizz Pro
™
8
KNOW YOUR BREVILLE KITCHEN WIZZ PRO™
A
E
C
D
F K
J
G
I
H
L
M
N
Q
S
WV
T U
O
Q
P
R
B
9
KNOW YOUR BREVILLE KITCHEN WIZZ PRO™
A. Small food pusher
For improved processing control of smaller
ingredients. It also doubles as a measuring
cup for adding/measuring ingredients.
The food processor will run continually
whether the small pusher is in or out.
B. Large food pusher
For pushing food down the feed chute.
The food processor will not start unless the
large pusher is in place correctly.
C. Extra wide feed chute
For larger ingredients.
D. Processing lid
Locks onto the processing bowl.
E. PULSE button
Press down and hold briefly for
short bursts of power. The motor will
automatically stop after the PULSE button
has been released.
F. POWER/OFF button
Provides power to the food processor unit
only. Start/Pause is required to be pressed
to start operating the food processor.
G. Feed chute safety system
Prevents the motor from operating unless
the bowl and lid are correctly locked in
position, and large feed pusher is inserted.
H. Silicone seal
Reduces the chance of leakage
while processing large volumes of
liquid ingredients.
I. Processing bowl with handle
15 cup bowl for dry ingredients and 10
cups for liquid (thick, wet ingredients e.g.
soups). The processing bowl locks onto the
motor base.
J. Count up & count down timer
Used to set desired time required for
processing. Can count up or down,
stopping the processor once the time is
reached in count down mode.
K. LCD display
Displays the timing function.
L. Direct drive motor base
2000W induction motor with safety
braking system.
M. Non-skid rubber feet
For added safety and stability.
N. Julienne disc
Use this disc for julienning vegetables.
O. Chip cutter
Use this disc for chipping vegetables.
P. Reversible shredder
Use one side for small/thin shredding and
the other side for coarse shredding.
Q. Adjustable slicer
Use this disc for slicing ingredients.
Able to slice from 0.5mm – 8mm thick.
R. Whisk/Emulsifying disc
Use this attachment for whisking of eggs
and cream.
S. QUAD
‰
processing blade
Swift action for chopping, mixing,
whipping and blending a variety of
ingredients.
T. Dough blade
Blunt blade designed for a softer action of
combining dough ingredients.
U. Mini processing blade
Used for chopping, mixing, and blending a
variety of ingredients.
V. Disc spindle
Fits onto bowl drive coupling and is used
to hold the reversible shredder, julienne,
chip cutting, whisk and adjustable slicing
discs in position.
W. Storage container with lid
Used for storing all discs and blades when
they are not in use.
NOT SHOWN
Cleaning Brush
For cleaning the processor bowl, blades and
discs. The flat end is designed as a scraper to
remove food particles from crevices.
Plastic Spatula
For scraping the sides of the bowl helping to
process ingredients evenly.
Mini Processing bowl
For processing small volumes of ingredients.
Cord Storage
Cord can be pushed into the housing to
reduce length.
Breville Assist Plug
Ergonomic ring-pull design allows the
power plug to be easily removed from the
power outlet.
ASSEMBLING
your Breville Kitchen Wizz Pro
™
11
ASSEMBLING YOUR BREVILLE KITCHEN WIZZ PRO™
BEFORE FIRST USE
Before using your Breville food processor,
become familiar with all the parts. Remove
all packaging materials and promotional
labels, being careful when handling the
processing blades and discs as they are very
sharp. Wash the processing bowl, processing
lid and other attachments in warm, soapy
water. Rinse and dry thoroughly.
(Refer to cleaning, care and storage section).
1. Place the motor base on a dry, level work
surface. Place the processing bowl on to
the motor base with the handle in line
with the ALIGN HANDLE graphic on
the motor base. (See Figure 1).
Fig. 1
2. Turn the processing bowl clockwise until
the handle aligns with the
TURN TO LOCK graphic.
The processing bowl should be securely
locked into position. (See Figure 2).
Fig. 2
3. If using a disc, first assemble the disc
spindle onto the bowl drive coupling.
Orientate the disc so that the side you
wish to use is facing upwards.
Hold the disc by the centre plastic
moulding and position the central hole
above the attachment spindle. Push
down firmly until fitted correctly. (Please
note that these discs only fit the larger
processing bowl).
Fig. 3
4. For using the processing blades,
carefully grasp either the quad blade,
dough blade or mini processing blade
using the central plastic support and
position it over the bowl drive coupling
and push down until inserted correctly.
If using the mini processing blade,
ensure the mini processing bowl is
assembled into the main bowl first.
Fig. 4
12
ASSEMBLING YOUR BREVILLE KITCHEN WIZZ PRO™
5. Place the processing lid onto the
processing bowl so the feed chute is
slightly right of the bowl handle and
the arrow graphics are aligned
.
Holding the feed chute and pressing
down firmly at the same time, turn
the lid clockwise (as indicated by the
graphic) so the ‘Locking Tab’ on the lid
slots into the ‘Interlocking Safety Catch’
on the handle. The lid should be securely
locked into position.
Fig. 5
NOTE
The food processor will not operate
unless both the processing bowl and
lid are correctly locked into position.
CAUTION
The processing blade (including
the mini bowl blade) and discs are
extremely sharp, handle with care at
all times.
6. Insert the power plug into a 230/240
volt power outlet and switch the power
outlet on.
7. Press the POWER/OFF button to turn
your food processor on. The red light
illuminates around the POWER/OFF
button to indicate that the processor
is on.
Your food processor has POWER/OFF,
START/PAUSE and PULSE buttons
to give total control when processing
food. Press the START/PAUSE button
to switch the motor on and operate
continuously.
NOTE
The food processor will not start
unless the large food pusher is
inserted correctly into place.
Press the POWER/OFF button to
switch the motor off. When short bursts
of power are required, press the PULSE
button and hold down briefly, release,
then press again. The PULSE action
will automatically stop when the button
is released.
8. To set the timer, press the
buttons
located to the left of the timing window.
Time will move up by 5 second intervals,
from 0 to 30 seconds. From 30 seconds
to 2 minutes the time will increase in 10
second intervals and from 2 minutes to
9.59 minutes the time will increases in
20 second intervals.
9. Once the time is set, press the
START/PAUSE button and the timer will
start to count down.
Ensure the large food pusher is inserted
correctly into place. The food processor
will not start until pusher is in place.
Once the timer has finished, the
food processor will stop and go into
STANDBY mode. Three (3) beeps will be
sounded to indicate that the processing
is complete.
The processor incorporates a ‘Safety
Interlock System’ that ensures the unit
will not start without the large food
pusher in position. Processing will stop
automatically, once the large food pusher
has been removed from the lid. The chute
MAX fill graphic indicates the maximum
volume of food to be placed in the chute
for the pusher to activate the unit.
13
ASSEMBLING YOUR BREVILLE KITCHEN WIZZ PRO™
10. At the end of processing, always
wait until the blades or discs have
stopped spinning before unlocking
and removing the lid. To remove the
processing lid, ensure the POWER/OFF
button has been pressed, the power is
switched off at the power outlet and the
cord is unplugged from the power outlet.
Holding the feed chute and pressing
down firmly at the same time, turn the
lid anti-clockwise so that the arrow
graphics are no longer aligned.
NOTE
As a safety feature, the food processor
will automatically switch off when the
lid is unlocked; however, it is good
practice to manually switch off the
food processor using the POWER/
OFF button before removing the lid.
11. Remove the processing bowl (before
removing blade or discs) by turning it
anti-clockwise until the handle is in line
with the ALIGN HANDLE. Lift the bowl
off the motor shaft.
When removing the discs - carefully
remove by gripping the plastic hub on
the centre of the disc and lifting the disc
up and away from the pin on the spindle.
NOTE
Reassemble the food processor by
locking the bowl into position before
attaching blade, disc or lid.
NOTE
Care should be taken when removing
the food from the processing bowl by
ensuring the motor, processing blade,
dough blade or discs have completely
stopped before disassembling. Ensure
the POWER/OFF button is pressed
to switch the motor off, the appliance
is switched off at the power outlet
and it is unplugged, before removing
the lid from the bowl. The processing
bowl should then be unlocked from
the motor body, then the quad blade,
dough or disc carefully removed
before attempting to remove the
processed food.
14
ASSEMBLING YOUR BREVILLE KITCHEN WIZZ PRO™
OVERLOAD PROTECTION SYSTEM
If the motor overloads, the food processor
will go to STANDBY mode and OVERLOAD
icon in the LCD starts to flash. The food
processor can still be switched off by
pressing the POWER/OFF button. To
operate the food processor again, allow the
machine to cool for approx 30 minutes.
Some stiff mixtures, such as dough, may
cause the dough blade to rotate more slowly
than normal. If this happens, do not process
for longer than 1 minute.
If the blades or discs should jam while
processing, ensure the POWER/OFF button
is pressed to switch the motor off. Switch
off the power outlet. Remove the processing
lid and adjust any food wedged between the
blade and the bowl or in the disc. Replace
the lid and proceed as normal. If this
occurs again, the processing bowl may be
overloaded, so remove some of the food and
process in smaller batches.
NOTE
The food processor is designed so
the motor will not operate without
the processing bowl and lid are
correctly locked into position and the
pusher inserted into the feed chute.
In the event that the food processor
starts without the lid correctly locked
into position, immediately disconnect
at the power outlet and return to
your local Breville Service Centre for
examination.
BASIC FOOD
PROCESSING
TECHNIQUES
for your Breville Kitchen Wizz Pro
™
16
PAge heAder.....
BASIC FOOD PROCESSING TECHNIQUES
The food processor can process food in a
variety of ways depending on which blade or
disc you choose.
CHOPPING WITH THE QUAD‰
PROCESSING BLADE
The quad blade chops raw and cooked
food to the consistency required, from
coarsely chopped to minced. For many
large processing tasks, the four blades will
cut the processing time needed to achieve
the desired results. The result depends on
the type of food and how long the food is
processed. Always remember to place the
quad blade into the processing bowl before
adding the food.
NOTE
To avoid over-processing check the
consistency frequently. For many
processing tasks we recommend to
use the PULSE button, as it may only
take a few seconds to fully process
the food to the desired consistency.
If necessary, press the POWER/OFF
button, unlock the lid and use the
spatula to scrape down the sides of the
bowl to ensure even processing.
Raw Vegetables, Fruit and Cooked Meats
Trim and cut food into 2.5cm cubes. Process
no more than 4 cups at a time using the
PULSE button at 1–2 second intervals until
chopped to desired size or consistency.
Spanish Onion wedges Chopped Spanish Onion
Raw meat, chicken and fish
Trim and cut food into 2.5cm cubes. Ensure
all bones are removed. Chill well until
firm as this will help the quad blade to cut
through the food more readily. Process no
more than 4 cups (or 600g of raw meat) at a
time using the START/PAUSE button until
chopped or minced to desired size
or consistency.
Cubed Beef Minced Beef
17
PAge heAder.....
BASIC FOOD PROCESSING TECHNIQUES
NOTE
Heavy loads of meat may stall the
motor. This is indicated by the blade
turning slowly and the meat only
moving slowly around the bowl and
not processing. If this occurs remove
the meat and process in two batches.
Garlic, chilli and ginger
For garlic, peel cloves and leave whole.
For chilli, leave whole (remove seeds for
milder chilli). For ginger, peel and cut into
2.5cm cubes. Process until chopped to
desired consistency. Store chopped garlic
or chilli mixed with a little oil in an airtight
container in refrigerator for up to 1 week.
Mix ginger with a little sherry. If adding
garlic, chilli or ginger to other ingredients,
drop whole pieces down feed chute while
the motor is running.
Whole chillies Chopped chillies
Herbs
Wash and dry herbs thoroughly. Remove
any coarse stems. Process no more than 2
bunches (approx. 4 cups) at a time using the
PULSE button at 1–2 second intervals until
chopped to desired size or consistency.
Basil leaves Chopped basil
Nuts
Process no more than 4 cups (250g) shelled
nuts at a time using the PULSE button
at 1–2 second intervals until chopped to
desired size.
Shelled peanuts Chopped peanuts
Dried fruit
As dried fruit can be sticky, place in freezer
for about 10 minutes (this prevents the fruit
sticking to the blades). Process no more
than 4 cups at a time using the PULSE
button at 1–2 second intervals until chopped
to desired size or consistency.
18
PAge heAder.....
BASIC FOOD PROCESSING TECHNIQUES
NOTE
If chopping fruit to add to cake batter,
process the fruit before making the
batter, adding a little flour from recipe
quantity to prevent fruit sticking to
quad blade.
Whole dried fruit Chopped dried fruit
Citrus peel
Remove the peel from the fruit using a
vegetable peeler and cut into 2.5cm pieces.
Process no more than 4 cups at a time
together with ½ cup granulated sugar and
using the PULSE button at 1–2 second
intervals until chopped to desired size.
NOTE
The white pith between the skin and
citrus flesh is bitter, so carefully
remove the citrus peel ensuring the
white pith remains on the fruit.
Hard boiled eggs
After cooking eggs to hard boiled stage,
allow to cool then remove shells and cut
eggs in half. Process no more than 12 eggs
at a time using the PULSE button at 1–2
second intervals until chopped to desired
size or consistency.
Soft breadcrumbs
Break stale bread into chunks (fresh bread
will stick to blades). Process no more than
4 cups at a time using the PULSE button
at 1–2 second intervals until crumbed to
desired consistency.
NOTE
For best results when making bread
crumbs, add one slice at a time.
NOTE
700g pkt sliced bread yields
approximately 10 cup soft
breadcrumbs. Freeze in one cup
portions for later use.
Dried breadcrumbs
Break bread into chunks and toast in oven
until golden and crisp. Do not over brown.
Process no more than 4 cups at a time using
the PULSE button at 1–2 second intervals
until crumbed to desired consistency.
Biscuit Crumbs
Break biscuits into quarters, measure
quantity and place into processing bowl.
Process no more than 4 cups at a time using
the PULSE button at 1–2 second intervals
until crumbed to desired consistency.
NOTE
Sweet or savory biscuit crumbs can
be used as an alternative to pastry for
sweet or savory pies.
Loading...