Breville Kitchen Wizz 15 Pro BFP800 Instruction Book

the Kitchen Wizz

‰

15 Pro

Instruction Book - BFP800

2

BREVILLE
RECOMMENDS
SAFETY FIRST

At Breville we are very safety
conscious. We design and
manufacture consumer
products with the safety of you,
our valued customer, foremost
in mind. In addition we ask
that you exercise a degree of
care when using any electrical
appliance and adhere to the
following precautions.

IMPORTANT
SAFEGUARDS

READ ALL INSTRUCTIONS
BEFORE USE AND SAVE
FOR FUTURE REFERENCE

• Remove any packaging
material and promotional
labels before using the food
processor for the first time.

• Do not place the food processor
near the edge of a bench or
table during operation. Ensure
the surface is level, clean and
free of water, flour, etc. Vibration
during operation may cause
the appliance to move.

• Handle the food processor
and attachments with care ­remember the blades and discs
are razor-sharp and should be
kept out of reach of children.

• Care shall be taken when
handling the sharp cutting
blades, emptying the bowl and
during cleaning.

• Always make sure the food
processor is completely
assembled before operating.
The appliance will not operate
unless properly assembled.

• Ensure the OFF button has been
pressed, and the food processor
is switched off at the power
outlet and unplugged before
attaching the Quad blade,
dough blade, disc or
processing lid.

• Always secure the processing
bowl onto the motor base
before attaching the Quad
blade, dough blade or discs.

• Always operate the food
processor with the processing
lid securely in position.

• Do not push food into the feed
chute with your fingers or
other utensils. Always use
the food pusher provided.

• Keep hands, knives and other
utensils away from moving
Quad blade, dough blade
or discs.

3

• Do not place hands or fingers in
the bowl of the food processor
unless the motor, Quad blade,
dough blade or discs have come
to a complete stop.

• Ensure the OFF button has
been pressed to switch the
motor off and the appliance
is switched off at the power
outlet and unplugged before
removing the lid from the bowl.

• Do not use attachments other
than those provided with the
food processor.

• Do not attempt to operate the
food processor by any method
other than those described in
this booklet.

• Ensure the motor, blades or
discs have completely stopped
before disassembling. Ensure
the OFF button has been
pressed and the appliance is
switched off at the power outlet
and unplugged when not in
use, if left unattended and
before disassembling,
cleaning or storing.

• Care should be taken when
removing the food from the
processing bowl by ensuring
the motor, Quad blade, dough
blade or disc, have completely
stopped before disassembling.
Ensure the OFF button has been
pressed to switch the motor

off; the appliance is switched
off at the power outlet and
unplugged, before removing
the lid from the bowl. The
processing bowl should then
be unlocked from the motor
body and the Quad blade,
dough blade or discs carefully
removed before attempting to
remove the processed food.

• Please do not crush ICE in the
large or small processing bowls.
This will cause damage to the
blades (Quad or mini blade).
We recommend that you use
a blender for ice crushing.

• Some stiff mixtures, such
as dough may cause the
processing blade to rotate
more slowly than normal.
If this happens, do not process
for longer than 1 minute.

• Do not process hot or boiling
liquids - allow liquids to cool
before placing into the
processing bowl.

• Do not use the food processor
on slippery, unstable or
uneven surfaces such as a sink
drain board.

• To protect against electric
shock do not immerse power
cord, plug or motor base in
water or any other liquid.

• Do not move the food
processor whilst in operation.

4

• Do not leave the food processor
unattended when in use.

• Do not place any part of the
food processor in the microwave
oven.

• Do not fill bowl above marked
liquid levels or 11 cup dry level
(shredding). Always add drier
or thicker ingredients to the
processing bowl prior to
adding fluids.

• Never remove the lid while
the processor is operating.
Always use the POWER/OFF
button to stop the machine
before removing the lid.

• Keep the appliance clean.
Follow the cleaning instructions
provided in this book.

IMPORTANT
SAFEGUARDS
FOR ALL
ELECTRICAL
APPLIANCES

• Unwind the power cord fully
before use.

• Do not let the power cord
hang over the edge of a table,
counter, touch hot surfaces or
become knotted.

• Cleaning and user maintenance
shall not be made by children
without supervision.

• This appliance shall not be used
by children. Keep the appliance
and its cord out of reach of
children.

• Children shall not play with
the appliance.

• Appliances can be used by
persons with reduced physical,
sensory or mental capabilities
or lack of experience and
knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved.

• It is recommended to regularly
inspect the appliance. Do not
use the appliance if power
supply cord, plug or appliance
becomes damaged in any way.
Return the entire appliance
to the nearest authorised
Breville Service Centre for
examination and/or repair.

• This appliance is for household
use only. Do not use this
appliance for anything other
than its intended use. Do not
use in moving vehicles or
boats. Do not use outdoors.

5

WARNING

• To avoid possible malfunction
of the processing bowl’s
auto switch, do not place the
processing lid in the locked
position when the appliance is
not in use.

• The processing blades and discs
are extremely sharp, handle with
care at all times. Do not place
hands, knives or other utensils
into the feed chute. Always use
the food pusher to push the
food down the feed chute.

• The installation of a residual
current device (safety switch)
is recommended to provide
additional safety protection
when using electrical appliances.
It is advisable that a safety
switch with a rated residual
operating current not exceeding
30mA be installed in the
electrical circuit supplying the
appliance. See your electrician
for professional advice.

• All maintenance (other
than cleaning) is to be
done by an authorised
Breville Service Centre.

• Authorised Breville Service
Centres can be found on our
website www.Breville.com.au
Alternatively, you can contact
the Breville Customer Care
Centre by phone on

1300 273 845 or email
[e-mail]

FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS

6

Components

A

B

C

D

E

F

G

J

N

O P

I

K

H

L

M

Mini
processing
blade

Mini
processing
bowl

7

Storage case

S

U

Q

T

R

V

W

X

Y

Tools with integrated spindle Tools with removable spindle

8

A. Small food pusher

For improved processing control of smaller
ingredients. It also doubles as a measuring
cup for adding/measuring ingredients.
The food processor will run continually
whether the small pusher is in or out.

B. Large food pusher

For pushing food down the feed chute.
The food processor will not start unless the
large pusher is correctly in place.

C. Feed chute safety system

Prevents the motor from operating unless the
bowl and lid are correctly locked in position,
and large feed pusher is inserted.

D. Extra wide 14cm chute

For larger ingredients.

E. Processing lid

Locks onto the processing bowl.

F. Silicone seal

Reduces the chance of leakage while
processing large volumes of liquid
ingredients.

G. Processing bowl with handle

15 cup bowl for dry ingredients and 10 cups
for liquid (thick, wet ingredients e.g. soups).
The processing bowl locks onto the
motor base.

H. LCD display

Displays the timing function.

I. Count up & count down timer

Used to set desired time required for
processing. Can count up or down, stopping
the processor once the time is reached in
count down mode.

J. POWER|OFF button
K. START|PAUSE button
L. PULSE button

Press down and hold briefly for short bursts
of power. The motor will automatically stop
after the PULSE button has been released.

M. Direct drive motor base

2000W induction motor with safety braking
system.

N. Non-skid rubber feet

For added safety and stability.

O. Plastic spatula

For scraping the sides of the bowl helping to
process ingredients evenly.

P. Cleaning brush

For cleaning the processor bowl, blades and
discs. The flat end is designed as a scraper to
remove food from crevices.

Q. Dough blade

Blunt blade designed for a softer action of
combining dough ingredients.

R. Quad

‰

processing blade

Swift action for chopping, mixing, whipping
and blending a variety of ingredients.

S. Quad

®

blade cover

T. Whisk/emulsifying disc

Use this attachment for whisking of eggs
and cream.

U. Adjustable slicer

Use this disc for slicing ingredients.
Able to slice from 0.3mm – 8.0mm thick.

V. French fries cutter

Use this disc for cutting vegetables to make
french fries.

W. Julienne disc

Use this disc for julienning vegetables.

X. Reversible shredder

Use one side for small/thin shredding and
the other side for coarse shredding.

Y. Disc spindle

Use with the reversible shredder, julienne,
chip cutting, whisk and adjustable slicing
discs in position.

9

Assembly

BEFORE FIRST USE

• Before using your food processor for the
first time, remove any packaging material
and promotional labels. Ensure the POWER
button is OFF and the food processor is
unplugged.

• Be careful when handling the blades and
discs as they are extremely sharp.

• Wash the processing bowl, processing lid
and all attachments in warm soapy water
with a soft cloth. Rinse and dry thoroughly.
The attachments may be washed in the
dishwasher.

• When first using your food processor, you
may notice an odour coming from the motor.
This is normal and will dissipate with use.

• Always use the food processor on a dry, level
work surface.

ASSEMBLY

1. Position the processing bowl onto the

motor base with the handle in line with
the ALIGN HANDLE graphic on the
motor base.

2. Turn the bowl clockwise until the handle
locks to the front. The processing bowl
should now be securely locked into position.
The food processor will not operate unless
the bowl is locked into position correctly.

3. The spindle is required when using
ALL discs, including the adjustable slicer,
reversible shredder, julienne, and french
fries cutter. Failing to use the spindle will
damage the parts, and incorrect use this
way may cause the parts to fuse together.

10

4. Before placing the lid onto the processing
bowl, position the spindle over the coupling
in the center of the processing bowl. Then
position your chosen cutting attachment
over the spindle.

5. Place lid onto the processing bowl so that
the ALIGN | LOCK graphics on the lid and
handle align. To LOCK the lid, hold the
chute and turn clockwise so that the handle
parts align. Locking the lid correctly will
engage the interlocking safety catch on the
handle, and allow the motor to run.

MINI PROCESSING BOWL

• The mini processing bowl fits inside the
main bowl.

• The mini processing blades give you
maximum control for small quantities.

• Do not use the spindle, or the processing
discs.

• Use only the mini processing blades in the
mini bowl. Please note that the mini blades
cannot be used in the main processing bowl.

11

Functions

OPERATION

Assembly

The food processor will only operate when
the processing bowl, lid and large pusher are
correctly assembled. This engages the safety
interlock, and allows the motor to run.

The chute has a MAX CHUTE FILL graphic
to indicate the maximum volume of food
that can be placed in the chute for the
pusher to activate the safety locking catch.

After processing, wait until the blades/discs
have stopped moving before unlocking the
lid. To ensure safe handling, turn off at the
POWER button and unplug at the power
outlet before handling the blades. When
removing blades/discs, lift by carefully grip
the plastic hub in the centre.

Control buttons

The POWER button illuminates red when
the machine is connected to power and is
ready to run.

The START button allows the motor to run
continuously until pressed again. If the lid,
bowl or large pusher are removed while the
motor is running, the button will flash. The
motor will resume running when the bowl,
lid and large pusher are assembled and the
safety interlock is engaged, the button light
will be solid (no longer flashing).

The momentary PULSE button is ideal for
processing foods that need sudden bursts
of power. It also encourages ingredients to
move around the bowl. PULSE is also best
when processing foods that only require
processing for a short period of time.

Use a combination of the START and
PULSE buttons for control when processing
food.

Timer

If the timer isn’t set, the food processor
timer counts up in seconds. When using
the timer this way, the processor will stop
after 10 minutes (9:59), or you can cancel
it manually.

The alternative to running in count-up mode
is to use the arrow buttons to set the timer
before starting.

Overload protection system

The food processor has an overload
protection system to prevent damage to
the motor.

If activated, the food processor will go into
STANDBY mode, and the buttons will flash.

Unplug and allow to cool for 30 minutes.
Once cooled, you will be able to use the food
processor as usual again.

Note that some stiff mixtures (such as bread
dough) may cause the blade to rotate more
slowly than normal. If this happens, do not
process for more than 1 minute.

If the blades or discs jam with food while
processing, immediately unplug from the
power outlet before clearing the wedged
food. If this happens more than once, the
bowl may be overloaded. Try processing in
smaller batches.