Breville Juice Fountain BJE510XL/A Instruction Book

BJE510XL /A

the Juice Fountain™ Multi-Speed

Instruction Book - Livret d’instructions

www.breville.com

Breville is a registered trademark of Breville Pty. Ltd. A.B.N. 98 000 092 928.

Copyright Breville Pty. Ltd. 2015.

Due to continued product improvement, the products illustrated/photographed

in this booklet may vary slightly from the actual product.

Model BJE510XL /A Issue - E15

USA

Mail: Breville USA

19400 S. Western Ave
Torrance CA
90501-1119

Phone: [phone]
1-866-BREVILLE

Web:

brevilleusasupport.com

Breville Consumer Support

Canada

Mail: Breville Canada

3595 boulevard Côte-Vertu,
Saint-Laurent, Québec,
H4R 1R2

Phone:

1-855-683-3535

Email:

[e-mail]

3

CONTENTS

4 Breville recommends safety first

7 Know your Breville product

10 Assembling your Breville product

11 Operating your Breville product

12 Disassembling your

Breville product

18 Care & cleaning

21 Troubleshooting

24 Tips on juicing

26 Fruit and vegetable facts

29 Recipes

42 French

CONGRATULATIONS

on the purchase of your Breville product

*Registering is not a substitute for proof of purchase when submitting a Warranty Claim.

USA Consumers: www.brevilleusa.com

Canadian Consumers: www.breville.ca

Register online for product support

and exclusive offers.

*

4 5

BREVILLE RECOMMENDS SAFETY FIRSTBREVILLE RECOMMENDS SAFETY FIRST

5

At Breville we are very safety conscious. We design and manufacture consumer products with
the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise
a degree of care when using any electrical appliance and adhere to the following precautions.

CAREFULLY READ ALL
INSTRUCTIONS THOROUGHLY
BEFORE OPERATING

When using electrical appliances, basic
safety precautions should always be
followed, including the following:

• To protect against fire, electrical shock

and injury to persons, do not immerse
the appliance, motor base, cord or plug
in water or any other liquid.

• Close supervision is necessary when the

appliance is used by or near children.

• Unplug from outlet when not in use,

before putting on or taking off parts, and
before cleaning or attempting to move
the appliance.

• Avoid contact with moving parts.

• Regularly inspect the supply cord, plug

and actual appliance for any damage.
Do not operate any appliance with
a damaged cord or plug or after the
appliance malfunctions, or is dropped
or damaged in any manner. Contact
Breville consumer support for assistance.

• The use of attachments not

recommended or sold by Breville may
cause fire, electric shock or injury.

• This appliance is for household use only.

Do not use this appliance for anything
other than its intended use. Do not use
in moving vehicles or boats. Do not use
outdoors. Misuse may cause injury.

• Do not let the power cord hang over the

edge of a table or counter-top.

• Do not let the power cord touch hot

surfaces, including stove, or become
knotted.

• Always make sure the juicer cover is

clamped securely in place (with safety
locking arm) before the motor is turned
on. Do not unfasten the clamps (safety
locking arm) while the juicer is in
operation.

• Always ensure the juicer is turned off

after each use. Make sure the filter
basket has stopped rotating and the
motor has completely stopped before
disassembling.

• Do not push food into the feed chute

with your fingers or other utensils.
Always use the food pusher provided.
Do not place hand or fingers into the
food chute when it is attached to the
appliance. If food becomes lodged in
feed chute, use food pusher provided
or another piece of fruit or vegetable to
push it down. Turn motor off and ensure
that all moving parts have stopped
before disassembling juicer to remove
the remaining food.

• Do not use appliance if the rotating

sieve (filter basket) is damaged.

• Do not use the appliance without

the pulp container attached to juicer
and juicer cover. Please see assembly
instructions for proper placement.

• Do not modify the plug in any way. If the

unit has a 2-pin plug it is it a polarized
plug. To reduce the risk of electric shock,
this plug will fit in a polarized outlet only
one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician.

ADDITIONAL SAFEGUARDS

• Remove and safely discard any

packaging material or promotional
labels before using the juicer for the
first time.

• To eliminate a choking hazard for young

children, remove and safely discard the
protective cover fitted to the power plug
of this appliance.

• Do not touch the small cutting blades/

teeth in the base of the juicing disc.

• Do not touch the sharp blade in the feed

tube.

• Always make sure the juicer is

properly and completely assembled
before connecting to power outlet and
operating.

• Ensure that the surface where the

appliance operates is stable, level, clean
and dry.

• Vibration can occur during normal

operation.

• Any significant spillage onto the surface

under or around the appliance, or onto
the appliance itself, should be cleaned
and dried before continuing to use the
appliance.

• When using this appliance, provide

adequate air space above and on all
sides for circulation.

• Do not operate juicer for more than a

minute at a time when juicing rapid rate
or with firm pressure. Allow the motor
to rest for 1 (one) minute between each
use.

• This juicer is only designed to juice

fruits and vegetables. Please refer to the
juicing guide to determine the correct
speed for the fruits and vegetables
selected for juicing. Do not use any
frozen fruits or vegetables.

• Hard fruits and vegetables will put

excess strain onto the motor if a low
speed is selected.

• Remove rind from all citrus fruit before

juicing.

IMPORTANT SAFEGUARDS

• Do not juice stone fruit unless pits or

seed stone have been removed.

• The appliance is not intended for use

by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.

• Do not leave the appliance unattended

when in use.

• Keep hands, fingers, hair, clothing as

well as spatulas and other utensils away
from the appliance during operation.

• Keep the appliance clean. Refer to care

and cleaning section.

• Any maintenance other than cleaning

should be performed by an authorized
Breville Service Center. Do not attempt
to repair or service juicer, Contact
Breville Consumer Support for
assistance.

• If any of the contained instructions or

warnings are not understood please
contact Breville Consumer Support for
assistance.

WARNING

Extra wide feed chute. Do not place
hands or foreign objects down feed
chute. Always use the food pusher
provided.

SAVE THESE
INSTRUCTIONS

6

BREVILLE RECOMMENDS SAFETY FIRST

KNOW

your Breville product

SHORT CORD INSTRUCTIONS

Your Breville appliance is fitted with a short
power supply cord to reduce personal injury
or property damage resulting from pulling,
tripping or becoming entangled with a
longer cord. If an extension cord is used, (1)
the marked electrical rating of the cord set
or extension cord should be at least as great
as the electrical rating of the appliance, (2)
the cord should be arranged so that it will
not drape over the countertop or table-top
where it can be pulled on by children or
tripped over unintentionally and (3) the
extension cord must include a 3-prong
grounding plug.

BREVILLE ASSIST™ PLUG

Your Breville appliance comes with a unique
Assist™ Plug, conveniently designed with
a finger hole to ease removal from the wall
outlet. For safety reasons it is recommended
you plug your Breville appliance directly
into its own electrical outlet on a dedicated
circuit separate from other appliances. If
the electric circuit is overloaded with other
appliances, your appliance may not function
properly. It is not recommended to use with
a power strip.

8 9

KNOW YOUR BREVILLE PRODUCT

A. Unique Direct Central Feed System

Ensures maximum juice extraction.

B. 3 Inch Extra Wide Feed Chute

Fits larger fruit and vegetables whole.

C. Juicer Cover

(Top shelf dishwasher safe)

D. 3 Litre Pulp Container

(Top shelf dishwasher safe)

E. Stylish Stainless Steel Design
F. ON/OFF Switch
G. LCD Speed Indicator

With juicing speed guide.

H. Electronic Variable Speed Control Dial

A

B

C

D

E

F

G

H

I

J

K

L
M

N

O

I. Food Pusher

For pushing whole fruit and vegetables
down the feed chute.
(Not dishwasher safe)

J. Die-Cast Metal Interlocking Safety Arm

Stops the juicer operating without the
juicer cover locked in place.

K. Nutri Disc™

Stainless steel, titanium reinforced
micro mesh filter basket. (Top shelf
dishwasher safe)

L. Motor Drive Coupling
M. Filter Bowl Surround

(top shelf dishwasher safe)

N. 1.2 Litre Juice Jug and Lid

With in-built froth separator.
(Top shelf dishwasher safe)

O. Heavy Duty Motor

With one year motor warranty.

NOTE

All Dishwasher Safe Parts are TOP
SHELF ONLY.

KNOW YOUR BREVILLE PRODUCT

QP

R

S

T

T. Juice Jug Lid

Allows juicer to operate with the lid on,
therefore eliminating any splatter during
operation. Place lid onto juice jug to
store juice in refrigerator.

NOT SHOWN

Cord

Exits at rear of juicer and wraps around feet.

NOTE

To retain froth in the juice jug simply
remove the lid before pouring the juice.

P. Custom Designed Juice Nozzle

Perfect for mess free juicing straight into
a glass. (Top shelf dishwasher safe)

Q. Cleaning Brush

Flat end of brush assists in removal
of pulp from the pulp container when
juicing large quantities, nylon brush end
makes for easy cleaning of the stainless
steel Nutri Disc™.
(Top shelf dishwasher safe)

R. Nutri Disc™

Allows you to extract only the juice from
fruit and vegetables.

S. Built In Froth Separator

Ensures juice froth is separated from
juice when poured into a glass
(If preferred).

11

ASSEMBLING

your Breville product

ASSEMBLING YOUR BREVILLE PRODUCT

BEFORE FIRST USE

Before using your juicer for the first time,
remove any packaging material and
promotional stickers and labels. Ensure the
appliance is turned off and the power cord is
unplugged.

Wash the filter bowl surround, Nutri Disc™,
juicer cover, food pusher, pulp container and
juice jug and lid in warm, soapy water with
a soft cloth. Rinse and dry thoroughly. The
motor base can be wiped with a damp cloth.
Dry thoroughly.

FOR USE WITH NUTRI DISC™

1. Place the motor base on a flat, dry

surface such as a bench top. Ensure the
appliance is turned OFF and the power
cord is unplugged.

2. Place the filter bowl surround on top of

the motor base.

3. Align the arrows at the base of the

Nutri Disc™ with the arrows on the
motor drive coupling and push down
until it clicks into place. Ensure the
Nutri Disc™ is fitted securely inside the
filter bowl surround and onto the
motor base.

4. Place the juicer cover over the filter bowl

surround, positioning the feed chute
over the Nutri Disc™ and lower
into position.

12

ASSEMBLING YOUR BREVILLE PRODUCT

5. Raise the safety locking arm up and

locate it into the two grooves on either
side of the juicer cover. The safety
locking arm should now be in a vertical
position and locked into place on top of
the juicer cover.

6. Slide the food pusher down the feed

chute by aligning the groove of the food
pusher, with the small protrusion on the
inside top of the feed chute. Continue to
slide the food pusher down into the
feed chute.

7. Place the pulp container into position

by tilting the base of the pulp container
away from the motor base and slide
the top of the pulp container over the
bottom of the juice cover. Tilt the base of
the pulp container back into the motor
base ensuring it is supported by the
container support extending from under
the motor base.

NOTE

To minimize cleaning, line the pulp
container with a produce bag to
collect the pulp. Pulp can then be used
in other dishes, or as compost for the
garden or discarded.

8. Place the juice jug provided under the

spout on the right-hand side of the
juicer. The juice jug lid can be used to
avoid any splatter.
Alternatively you can fit the custom­designed juice nozzle over the juice
spout and place a glass underneath.
The juice nozzle will prevent splatter,
ensuring mess free juicing.

OPERATING

your Breville product

14 15

OPERATING YOUR BREVILLE PRODUCT

1. Wash selection of fruit and vegetables to

be juiced.

NOTE

Most fruit and vegetables such as
apples, carrots and cucumbers will not
need to be cut or trimmed to size as
these will fit whole into the feed chute.
Ensure vegetables such as beets,
carrots, etc. have all soil removed, are
well washed and trimmed of leaves
before juicing.

2. Ensure the juicer is correctly assembled.

Refer to Assembling your juicer. Ensure
the juice jug (or a glass) is placed under
the spout and the pulp container is in
position before commencing juicing.

3. Plug the power cord into a 110/120V

power outlet. The LCD display
will illuminate.

4. Press the ON/OFF switch on the control

panel to ON. The juicer will start to
operate at the selected speed. The speed
can be changed at any time during the
juicing process by adjusting the variable
speed control dial.

5. With the motor running, place food into

the feed chute and use the food pusher
to gently guide food down. To extract the
maximum amount of juice, always push
the food pusher down slowly.

6. As fruit and vegetables are processed,

juice will flow into the juice jug and the
separated pulp will accumulate in the
pulp container. The pulp container can
be emptied during juicing by turning the
juicer OFF at the control panel and then
carefully removing the pulp container.
Replace the empty pulp container into
position before continuing to juice.

NOTE

After 3 minutes, the LCD display will
automatically turn off if the ON/OFF
switch is not turned ON, or a speed is
not selected.

NOTE

The LCD display will illuminate
continuously for 3 minutes before going
into a sleep mode, where it will turn off
automatically to conserve power.

The screen will come back on after
activating the ON/OFF switch, the
speed control dial, or the safety
locking arm.

When the safety locking arm is not
locked into place on top of the juicer
cover, the LCD display will illuminate
and flash with an “L”, indicating that
the safety locking arm should be
locked into place.

When the safety locking arm is locked
into place on top of the juicer cover,
the LCD display will illuminate and
display the selected speed setting. The
speed can be changed by adjusting the
variable speed control dial. For a quick
juicing speed reference, use the speed
guide displayed on the LCD screen,
the speed selector table located on the
pulp container, or refer to the speed
selector table.

Hard fruits and vegetables will put
excess strain onto the motor if a low
speed is selected. Please refer to the
speed selector table to determine
the correct speed for the fruits and
vegetables being juiced

OPERATING YOUR BREVILLE PRODUCT

PREPARATION OF FRUIT AND
VEGETABLES FOR JUICE EXTRACTOR
SPEED SELECTOR TABLE

FRUIT / VEGETABLES

SUGGESTED
SPEED

Apples 5

Apricots (stone removed) 2

Beetroot (cleaned, trimmed) 5

Blueberries 1

Broccoli 4

Brussel Sprouts (trimmed) 5

Cabbage 4

Carrots (cleaned) 5

Cauliflower 4

Celery 5

Cucumber (peeled) 2

Cucumber - soft skinned 4

Fennel 5

Grapes (seedless) 1

Kiwi fruit (peeled) 2

Mangoes (peeled, stone
removed)

2

Melons (peeled) 1

Nectarines (stone removed) 2

Oranges (peeled) 3

Peaches (stone removed 2

Pears - hard (stalks removed) 5

Pears - soft (stalks removed) 2

Pineapple (peeled) 5

Plums (stone removed) 2

Raspberries 1

Tomatoes 1

Watermelon 1

NOTE

Use the speed selector table located
on the pulp container for a quick and
convenient juicing reference.

NOTE

The juicer will automatically stop
operating if the motor is stalled for
more than 10 seconds. This is a safety
feature. Either too much food is being
processed at one time or the pieces
are not small enough. Try trimming
food, cutting food into smaller pieces
of even size and/or processing a
smaller amount per batch.
To continue juicing, reset the Juicer
by pressing the ON/OFF switch on
the control panel to OFF, and remove
power cord from power outlet, then
clear the feed chute, finally plug power
cord back into power outlet. Turn the
appliance back on by pressing the
ON/OFF switch to ON.

NOTE

Do not allow the pulp container
to overfill as this may affect the
operation of the appliance.

To minimize cleaning, line the pulp
container with a produce bag to
collect the pulp. Pulp can then be used
in other dishes, or as compost for the
garden or discarded.

To include the froth in with your juice,
simply remove the lid of the juice jug
when pouring juice into the glass.

WARNING

Never use fingers, hands or other
utensils to push food down the feed
chute or to clear the feed chute during
operation. Always use the food
pusher provided.

17

DISASSEMBLING

your Breville product

DISASSEMBLING YOUR BREVILLE PRODUCT

JUICE EXTRACTOR

1. Ensure the juicer is turned off by

pressing the ON/OFF switch on the
control panel to OFF. Then unplug
the cord.

2. Remove the pulp container by tilting the

base away from the motor base, then pull
it out from under the juicer cover and the
container support extending from under
the motor base.

3. Use the grip handle located on the safety

locking arm to lift the locking arm from
the juicer cover and lower down out
of position.

4. Lift the juicer cover off the juicer.

5. Remove the filter bowl surround with the

Nutri Disc™ still in place.

6. To remove the Nutri Disc™ from the

filter bowl surround, insert fingers under
the grooves and lift the juice disc up.
For easy cleaning, it is recommended to
remove the Nutri Disc™ over the sink.

WARNING

The Nutri Disc™ contains small sharp
blades to cut and process fruits and
vegetables. Avoid touching blades
when handling the filter basket.

19

CARE & CLEANING

for your Breville product

CARE & CLEANING

Ensure the juicer is turned off by pressing
the ON/OFF button on the control panel to
OFF. Then unplug the cord.

Ensure the juicer is correctly disassembled.
Refer to Disassembling your juicer.

NOTE

FOR EASIER CLEANING:
Clean as you go and avoid dried on
juice or pulp residue.

Immediately after each use, rinse
removable parts in hot water to remove
wet pulp. Allow parts to air dry.

To minimize cleaning, line the pulp
container with a produce bag to
collect the pulp. Pulp can then be used
in other dishes or as compost for the
garden or discarded.

CLEANING THE MOTOR BASE

1. Wipe the motor base with a soft, damp

cloth then dry thoroughly.

2. Wipe any excess food particles from the

power cord.

NOTE

Do not use abrasive scouring pads
or cleaners when cleaning the parts
or motor base as they may scratch
the surface .

CLEANING THE FILTER BOWL
SURROUND, JUICER COVER, FOOD
PUSHER, PULP CONTAINER

1. Wash all parts in warm soapy water with

a soft cloth. Rinse and dry thoroughly.

NOTE

The filter bowl surround, juicer cover
and pulp container are dishwasher
safe. (top shelf only)

CLEANING THE NUTRI DISC™

For consistent juicing results always ensure
that the Nutri Disc™ is thoroughly cleaned
using the supplied cleaning brush.

1. Soak the Nutri Disc™ in hot soapy

water for approximately 10 minutes
immediately after juicing is completed.
If pulp is left to dry on the filter it may
clog the fine pores of the filter mesh
thereby lessening the effectiveness of
the juicer.

2. Using the cleaning brush, hold the juice

disc under running water and brush
from the inside of the basket to the outer
rim. Avoid touching the small sharp
blades in the center of the Nutri Disc™.
After cleaning the Nutri Disc™, hold
it up towards a light to ensure the fine
mesh holes are not blocked. If the holes
are blocked, soak the Nutri Disc™ in hot
water with 10% lemon juice to loosen the
blocked holes. Alternatively, wash the
Nutri Disc™ in the dishwasher.

20

CARE & CLEANING

NOTE

The Nutri Disc™ is dishwasher safe.
(top shelf only)

• Do not soak the Nutri Disc™ in bleach or

other abrasive cleansers.

• Always treat the Nutri Disc™ with care as

it can be easily damaged.

CLEANING THE JUICE JUG

1. Rinse the juice jug and lid with froth

attachment under running water.

2. Wash both parts in warm soapy water with

a soft cloth. Rinse and dry thoroughly.

NOTE

The juice jug and lid are dishwasher
safe (top shelf only).

REMOVING STUBBORN OR STRONG
FOOD STAINS AND ODORS

Discoloration of the plastic may occur with
brightly colored fruit and vegetables. To
help prevent this, wash parts immediately
after use. If discoloration does occur, the
plastic parts can be soaked in water with
10% lemon juice or they can be cleaned with
a non abrasive cleaner.

WARNING

Do not immerse the motor base in
water or any other liquid.

The center of the Nutri Disc™ and feed
chute contains small sharp blades to
process fruit and vegetables during
the juicing function. Do not touch
blades when handling the Nutri Disc™
or feed chute.

TROUBLESHOOTING

22 23

PAGE HEADER..... PAGE HEADER.....

TROUBLESHOOTING

POSSIBLE PROBLEM EASY SOLUTION

Machine will not work
when turned ON

• The safety locking arm may not be correctly engaged in

the vertical operating position with the locking arm located
into the two grooves on either side of the juicer cover.

Motor appears to stall
when juicing

• Wet pulp can build up under the juicer cover if the juicing

action is too vigorous. Try slower juicing action by pushing
the food pusher down slower. Follow Disassembling and
Cleaning instructions and clean the filter bowl surround,
the juice disc and the juicer cover.

• The juicer will automatically stop operating if the motor

is stalled for more than 10 seconds. Either too much food
is being processed at one time or the pieces are not small
enough. Try trimming the food or cutting into smaller
pieces of even size and processing a smaller amount per
batch. To continue juicing, reset the juicer by pressing the
‘On/Off’ switch on the control panel to ‘Off’ then turn the
appliance back on by pressing ‘On/Off’ switch to ‘On’.

• Hard fruits and vegetables will put excess strain onto the

motor if a low speed is selected. Please refer to the juicing
guide to determine the correct speed for the fruits and
vegetables selected for juicing.

Excess pulp building
up the Nutri Disc™

• Stop the juicing process and follow Disassembling

Instructions. Remove the juicer cover, scrape off pulp,
reassemble and begin juicing again. Try alternating (soft
and hard) vegetable and fruit varieties.

Pulp too wet and
reduced extracted juice

• Try a slower juicing action.

• Remove Nutri Disc™ and thoroughly clean mesh walls

with a cleaning brush. Rinse the Nutri Disc™ under hot
water. If the fine mesh holes are blocked, soak the basket
in a solution of hot water with 10% lemon juice to unblock
the holes or wash in the dishwasher. This will remove
excess fiber build up (from fruit or vegetables) which
could be inhibiting the juice flow.

Juice leaks between the
rim of the juicer cover

• Try a slower juicing speed and push the food pusher down

the feed chute more slowly.

TROUBLESHOOTING

POSSIBLE PROBLEM EASY SOLUTION

Juice sprays out
from spout

• Use juice jug and lid provided, or if juicing into a glass use

the custom designed juice nozzle.

• Try using fruits with more water content to help flush

through the contents. Additionally, try a slower juicing
action by feeding one piece in at a time and by pushing
the food pusher down more slowly.

25

TIPS ON JUICING

TIPS ON JUICING

THE INSIDE INFORMATION
ON JUICING

Although the juice drinks contained in this
booklet were developed with flavor, texture
and aroma at the forefront, the health
benefits certainly add to the pleasurable
taste experience.

70% of the nutrient content of fruit and
vegetables is found in the juice. Liquids
extracted from fresh fruits and vegetables
form an important part of a well-balanced
healthy diet. Fresh fruit and vegetable juices
are an easy source of vitamins and minerals.
Juices are rapidly absorbed into the blood
stream therefore being the quickest way in
which the body can digest nutrients.

When you make your own fruit and
vegetable juices, you have complete control
over what is included. Select the ingredients
and decide if you need to add sugar, salt or
other flavoring agents after juicing. Freshly
extracted juices should be consumed
immediately after they have been processed
to avoid a loss of vitamin content.

PURCHASING AND STORAGE OF
FRUIT AND VEGETABLES

• Always wash fruit and vegetables

before juicing.

• Always use fresh fruit and vegetables

for juicing.

• To save money and obtain fresher

produce, purchase fruit or vegetables
that are in season. Refer to the Fruit and
Vegetable Facts chart.

• Keep your fruit and vegetables ready

for juicing by washing and drying them
before storing.

• Most fruits and hardier type vegetables

can be stored at room temperature. The
more delicate and perishable items
such as berries, leafy greens, celery,
cucumbers and herbs should be stored
in the refrigerator until required.

PREPARATION OF FRUIT AND
VEGETABLES FOR JUICER
ATTACHMENT

• If using fruits with hard or inedible

skins such as mangoes, citrus, melons or
pineapple, always peel before juicing.

• Some vegetables, such as cucumbers,

can be processed un-peeled depending
on the softness of the skin and the
juicing requirements.

• All fruits with large pits, hard seeds

or stones such as nectarines, peaches,
mangoes, apricots, plums and cherries
must be pitted before juicing.

• Ensure vegetables such as beets, carrots,

etc. have all soil removed, are well
washed and trimmed of leaves
before juicing.

• Ensure fruits such as strawberries are

hulled before juicing and pears have
their stalks removed.

• Citrus fruit can be juiced in the juicer

but remove the skin and excess pith
before juicing.

• A small amount of lemon juice can be

added to apple juice to
reduce discoloration.

NOTE

Your juicer makes invigorating,
frothy orange juice. Simply peel the
oranges and remove any excess pith
before juicing. It is best to refrigerate
oranges before juicing.