Breville JK147 Instructions For Use Manual

Instructions for Use

PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

These instructions refer to the Breville Blue Ice Kettle JK147

Blue Ice Kettle

2

1 Lid release button

2 Hinged locking lid

3 Spout

4 Filter

5 Crystal clear polycarbonate body

6 Blue illumination on boil

7 Easy clean, fast boil 3000W

concealed element

8 360O rotational power base with

cord storage and cable exit

9 On/Off switch

FEATURES

9

5

2

2

3

8

6

7

1

4

3

BEFORE USING YOUR KETTLE

1 Remove any packaging and

promotional material from the kettle
and position on a dry, level, secure
work surface away from the edge.

2 Before connecting to a power source,

make sure your mains supply voltage
is the same as the one indicated on
the base of this appliance. Connect
the plug to a suitable power outlet and
ensure that the power cord does not
overhang the work surface.

3 Remove the kettle from the power

base and press the lid release button
to open. Fill the kettle to the
maximum indication mark on the body
and close the lid.

4 Place the kettle back onto the power

base. Ensure the kettle is not over­filled. Always compare the water level
against the maximum water mark,
with the kettle positioned on the
power base.

5 Turn on the kettle by pressing the

ON/OFF switch down.

Bring to the boil and then discard the
water. Repeat this procedure two more
times. This removes any residues that
may have remained from the
manufacturing process. Remove and
rinse the filter before use. See cleaning
the filter section.

4

USING YOUR KETTLE

1 With the kettle switched off (ON/

OFF switch in the UP position),
plug the power base into a
suitable power outlet.

2 Remove the kettle from the power

base before filling with water. Do
not fill through the spout.

3 Open the lid by pressing the lid

release button and fill through the
top, observing the capacity
markings on the kettle body.

4 Fill the kettle with no less than

the minimum amount of water
and no more than the maximum
capacity.

TO ENSURE KETTLE IS NOT

OVERFILLED, ALWAYS CHECK
THE KETTLE’S WATER LEVEL
WITH THE KETTLE
POSITIONED ON ITS POWER
BASE.

5 Push the lid closed and then

switch the kettle on by
depressing the ON/OFF switch.

Be careful to close the lid
correctly to ensure optimum
operation.

When the kettle is switched on,

the ON/OFF switch and the body
illuminates.

6 When the water reaches boiling

point, the kettle turns off
automatically.

Due to the clear nature of the kettle
it will be possible to see the water
boiling. This kettle is designed to

turn off automatically at boiling
point. (100°C). It may be possible to
see the water boiling from around
95°C, and it may give the impression
that the kettle has been boiling for to
long.

7 You may also switch the kettle off

manually at any time, by gently
lifting the bottom of the ON/OFF
switch upwards.

WARNING: If this product is

filled above the max. level,
hot water may be ejected.

Energy Saving Hints and Tips

A Breville kettle, if used correctly, is
a very energy efficient device. Why
not try some of these energy saving
tips?

• Only boil the water you need.
Overfilling your kettle by one cup
is the equivalent to using an
energy saving light bulb for one
hour!

• It is not always necessary to re­boil your kettle. For example, one
litre of water will still be at 90°C
after five minutes - the perfect
temperature for a cup of coffee.

THINK ECO!