Breville Jjggb User Manual
Breville Customer Service Center
US Customers
Mail: Breville USA
19400 S.Western Ave
Torrance CA
CA 90501-1119
Phone: Customer Service
1 (866) BREVILLE
Email: Customer Service:
askus@brevilleusa.com
Canada Customers
Mail: Breville Canada
2555, Avenue de l’Aviation
Pointe-Claire (Montreal)
Quebec H9P 2Z2
Phone: Customer Service:
1 (866) BREVILLE
Email: Customer Service:
askus@breville.ca
www.breville.com
Breville is a registered trademark of Breville Pty Ltd. A.B.N. 98 000 092 928.
USA: 19400 S.Western Ave, Torrance, CA90501-1119, Tel: 1 866 BREVILLE.
CANADA: 2555, Avenue de l’Aviation, Pointe-Claire (Montreal) Quebec, H9P2Z2. Tel: 1 866 BREVILLE
Copyright Breville Pty Ltd 2009. Due to continued product improvement, the products illustrated/photographed in this brochure may
vary slightly from the actual product.
Model BBL410XL Issue NA-2/09
Variable Speed Blender
Instruction Booklet Livret d’instructions
BBL410XL
CONGRATULATIONS
CONTENTS
on the purchase of your new Breville Variable Speed Blender
4 Breville Recommends Safety First
8 Know your Breville Variable Speed
Blender
10 Operating Your Breville Variable
Speed Blender
16 Care, Cleaning and Storage of your
Breville Variable Speed Blender
18 Hints and Tips on how to use your
Breville Variable Speed Blender
20 Recipes
2
4
5
BREVILLE RECOMMENDS SAFETY FIRST BREVILLE RECOMMENDS SAFETY FIRST
At Breville we are very safety conscious. We design and manufacture consumer products with the
safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree
of care when using any electrical appliance and adhere to the following precautions.
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS
BEFORE USE AND SAVE
FOR FUTURE REFERENCE
Remove and safely discard any packing •
materials and promotional labels before
using the appliance for the first time.
To eliminate a choking hazard for young •
children, remove and safely discard the
protective cover fitted to the power plug
of this appliance.
Keep hands and utensils out of •
container while blending to reduce
the risk of severe injury to persons or
damage to the blender. A scraper may
be used but must be used when the
blender is not running.
Do not place the appliance near the edge •
of a bench or table during operation.
Ensure the surface is level, clean and free
of water, flour, etc.
Always operate the appliance on a •
stable, heat resistant surface. Do not use
on a cloth-covered surface, near curtains
or other flammable materials.
A fire may occur if the appliance is •
covered or touches flammable materials,
including curtains, draperies, walls, and
the like, when in operation.
Do not place the appliance on or near •
a hot gas or electric burner, or where it
could touch a heated oven.
Always operate blender with cover •
in place.
Avoid contacting moving parts.•
Do not let the power cord hang over •
the edge of a table or counter, or touch
hot surfaces.
To protect against electric shock do not •
immerse the appliance, power cord or
power plug in water or any other liquid.
The use of attachements, including •
canning jars, not recommended by the
manufacturer may cause a risk of injury
to persons.
Blades are sharp. Handle Carefully.•
To reduce the risk of injury, never place •
blade assembly on base without jar
properly attached.
This appliance is for household use only.•
Do not use the appliance for anything •
other than its intended purpose as
described in this booklet. Do not use
outdoors. Do not use in moving vehicles
or boats.
Do not place hot or boiling ingredients •
into the blender; allow to cool before
placing into the blender jug.
Do not leave the appliance unattended •
when in use.
Close supervision is necessary when the •
appliance is used by or near children.
This appliance is not intended for use by •
persons (including children) with reduced
physical, sensory or mental capabilities
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
When the appliance is not in use or when •
left unattended, ensure the appliance
is turned OFF by turning the Variable
Speed Control Dial to the ‘OFF’ position
and removing the power plug from the
wall outlet.
Before attempting to move the appliance, •
or before assembling or disassembling
parts, cleaning or storing, turn OFF the
appliance and disconnect from the wall
outlet.
Strictly follow the Care and Cleaning •
instructions on page 16.
Do not use harsh abrasives or caustic •
cleansers when cleaning this appliance.
This appliance is equipped with a power •
cord having a grounding wire with a
grounding plug. The appliance must
be grounded using a 3-hole properly
grounded outlet. In the event of an
electrical short circuit, grounding reduces
the risk of electrical shock.
If the power outlet is a standard •
2-prong wall outlet, it is your personal
responsibility and obligation to have
it replaced with a properly grounded
3-prong wall outlet.
Do not, under any circumstances, cut or •
remove the third (ground) prong from the
power cord or use an adapter.
Consult a qualified electrician if the •
grounding instructions are not completely
understood, or if doubt exists as to
whether the appliance is properly
grounded.
The installation of a residual current •
device (safety switch) is recommended to
provide additional safety protection when
using electrical appliances. It is advisable
that a safety switch with a rated residual
operation current not exceeding 30mA
be installed in the electrical circuit
supplying the appliance. See your
electrician for professional advice.
Regularly inspect the supply cord, plug •
and actual appliance for any damage.
Do not operate if damaged in anyway
or after the appliance malfunctions.
Immediately cease use of the appliance
and call Breville Customer Service at
1-866-BREVILLE for examination, repair
or adjustment.
For any maintenance other than •
cleaning, call Breville Customer Service
at 1-866-BREVILLE.
Your Breville appliance comes with •
a unique Assist Plug™, conveniently
designed with a finger hole in the
power plug for easy and safe removal
from the wall outlet. For safety reasons
it is recommended you plug your
Breville appliance directly into its own
electrical outlet on a dedicated circuit
separate from other appliances. If the
electric circuit is overloaded with other
appliances, your appliance may not
function properly. Use in conjunction
with a power strip or extension cord is
not recommended.
SAVE THESE INSTRUCTIONS
6
7
BREVILLE RECOMMENDS SAFETY FIRST
ELECTRIC CORD
INSTRUCTIONS
Your Breville appliance is fitted with a short
power supply cord as a safety precaution
to prevent personal injury or property
damage resulting from pulling, tripping or
becoming entangled with a longer cord.
Do not allow children to use or be near this
appliance without close adult supervision.
If an extension cord is used, (1) the marked
electrical rating of the cord set or extension
cord should be at least as great as the
electrical rating of the appliance, (2) the
cord should be arranged so that it will not
drape over the countertop or tabletop
where it can be pulled on by children or
tripped over unintentionally and (3) the
extension cord must include a 3-prong
grounding plug.
8
9
KNOW
KNOW YOUR BREVILLE VARIABLE SPEED BLENDER
your Breville Variable Speed Blender
Breville Assist Lid™
ring pull ensures the lid is easy
to remove yet sealed tight during
operation.
Integrated Measuring Cup
for adding ingredients whilst
blending and doubles as a
blade removal tool.
Large 54oz Glass Jug
Stainless Steel Serrated
Blades
Blade Assembly
removable for easy cleaning
Illuminating ‘PULSE/ICE
CRUSH’
Variable Speed Control
with 12 settings.
Cord Storage
located on the underside of the
blender.
OPERATING
OPERATING YOUR BREVILLE VARIABLE SPEED BLENDER
your Breville Variable Speed Blender
BEFORE FIRST USE
Remove and safely discard any packaging
material and promotional labels.
Disassemble the blender by following steps
1 to 3 in “Disassembling the Blender”.
Wash the lid, Integrated Measuring
Cup, blender jug, silicon seal and blade
assembly (refer to Disassembly instructions)
in warm, soapy water with a soft cloth.
Rinse and dry thoroughly. Wipe the motor
base with a damp cloth and dry thoroughly.
NOTE:
The blending blades are extremely
sharp. Avoid any contact with
fingers and hands.
ASSEMBLING AND ATTACHING
THE BLENDER JUG
Place the motor base on a flat, dry 1.
surface such as a bench top. Ensure
that the Speed Selection Dial is in the
‘OFF’ position and the power cord is
unplugged from the power outlet.
2.
Place the blender jug upside down on
a flat dry surface such as a bench top.
Place the silicon seal onto the base of
the blade assembly.
Hold the jug handle and place the blade 3.
assembly onto the base of jug, turn
in a clockwise direction until firmly in
position.
4.
Turn the blender jug upright and place
onto the motor base. The blender jug
handle can be positioned to the left or
the right of the appliance. Add food or
liquid into the blender jug ensuring not
to exceed the ‘MAX’ mark. Place the
blender lid firmly into position on the
top of the blender jug. Insert the
clear Integrated Measuring Cup into
the blender and turn until secured
into position.
NOTE:
When adding oil or other liquids
during the operation, turn the clear
Integrated Measuring Cup to the
unlocked position, remove it and
pour the oil or liquid through the
opening in the lid. The Integrated
Measuring Cup can be removed to
add ingredients or check the texture
of the ingredients.
11
12
13
OPERATING YOUR BREVILLE VARIABLE SPEED BLENDER OPERATING YOUR BREVILLE VARIABLE SPEED BLENDER
NOTE:
The blender features a Breville
Assist Lid™. This allows the lid
to fit tightly onto the blender jug,
avoiding displacement during
operation. The ring pull design
allows easy removal of the lid with a
simple leverage action.
Ensure the blender is in the ‘OFF’ 5.
position.
6.
Plug the power cord into a 110/120V
power outlet.
NOTE:
Do not fill the blender jug above
the ‘MAX’ line. When the blender
jug is filled at or near the ‘MAX’ line
place one hand on the blender lid to
avoid displacement of the lid during
operation.
Select the required speed (2 to 12) by
turning the Speed Selector Dial to the
corresponding speed.
Operate the blender only for the
appropriate amount of time required – do
not over-blend.
NOTE:
To stop blending at any time, return
the dial to the ‘OFF’ position.
The speed can be changed at any
time during the blending process
by rotating the dial to the desired
speed.
‘PULSE/ICE CRUSH’ - For ingredients 7.
that require short bursts of power, like
crushing ice, press the ‘PULSE/ICE
CRUSH’ button. The Pulse feature can
be used while the Speed Selector Dial
is in the ‘STAND BY’ position. When
pressed, the ‘PULSE/ICE CRUSH’
button will illuminate and will continue
to operate until it is released.
NOTE:
If the ‘PULSE/ICE CRUSH’ button is
pressed while the Speed Selector
Dial is set to any of the blending
speeds (2-12), the blender motor
will accelerate up to the max speed
(12) until it the button is released.
NOTE:
The maximum amount of ice cubes
the blender can blend at any one
time is 1 cup (8oz/235ml) or ¾ of
a standard ice tray.
NOTE:
Use the ‘PULSE/ICE CRUSH’
button when the food that is being
processed is too thick or coarse to
circulate within the blender jug.
At the end of use, always ensure the 8.
blender is turned to the ‘OFF’ position,
then unplug the power cord from the
outlet. Ensure the motor and blades
have completely stopped before
attempting to move the appliance,
or when the blender is not in use
and before disassembling, cleaning
and storing.
NOTE:
During the blending process,
ingredients may stick to the side
of the blender jug. To push the
food back onto the blades, turn the
blender to the ‘OFF’ position, then
unplug the power cord from the
power outlet.
Remove the lid and use a plastic
spatula to scrape down the sides
of the jug. Replace the lid before
recommencing blending.
NOTE:
If any moisture or liquid appears
on top of the motor base during
blending, turn the blender to the
‘OFF’ position, then unplug the
power cord from the power outlet.
Remove the blender jug. Wipe the
motor base immediately with a
dry cloth or paper towel to absorb
the liquid. Make sure the blade
assembly is correctly assembled.
NOTE:
The Breville Variable Speed
Blender features a motor overload
protection feature. If the motor is
being overloaded, the motor will
stop and the ‘PULSE/ICE-CRUSH’
button will illuminate and flash. To
restart it again, unplug from the
power outlet and let it cool down for
30 minutes or longer.
DISASSEMBLING YOUR BLENDER
FOR CLEANING, CARE AND
STORAGE
Always ensure the Blender is off by 1.
turning the dial to the ‘OFF’ position,
then unplug the power cord from the
power outlet.
2.
Remove the blender jug from the motor
base by grasping the handle and lifting
the jug in an upward direction.
3.
Remove the blade assembly by turning
the blender jug upside down and
twisting the Blade Assembly counter
clockwise to unlock, then lift upwards
and away from the base of the blender
jug. The plastic surround attached
to the base of the blender jug is not
removable.
NOTE:
The Integrated Measuring Cup
also doubles as a Blade Assembly
removal tool and can be used to
assist in this process.
NEVER PLACE ANYTHING
OTHER THAN FOOD AND
LIQUIDS IN THE BLENDER
WHILST THE MOTOR IS
RUNNING.
14
15
OPERATING YOUR BREVILLE VARIABLE SPEED BLENDER
REASSEMBLING YOUR BLENDER
JUG AFTER CLEANING
Ensure parts are clean and completely 1.
dry.
2.
To reassemble the blender, replace the
silicon seal onto the blade assembly.
Place the blender jug upside down and 3.
insert the Blade Assembly into the jug
base. Turn in a clockwise direction until
firmly in position.
Place the Integrated Measuring Cup 4.
into the lid and turn until firmly locked
into position.
1
2
BE CAREFUL WHEN HANDLING
THE BLENDING BLADES
AS THEY ARE SHARP.
MISHANDLING OF THE BLADES
MAY CAUSE INJURY.
CARE, CLEANING AND
CARE, CLEANING AND STORAGE
STORAGE
of your Breville Variable Speed Blender
CLEANING THE MOTOR BASE
Wipe the motor base with a soft, damp
cloth then dry thoroughly. Wipe any excess
food particles from the power cord.
NOTE:
Do not use abrasive scouring pads
or cleaners when cleaning the
motor base as they may scratch
the surface.
CLEANING THE BLENDER JUG,
LID, INTEGRATED MEASURING
CUP, SILICON SEAL AND BLADE
ASSEMBLY
Wash all parts in warm soapy water with
a soft cloth. Use a kitchen bottle brush
to dislodge stubborn food. Rinse and dry
thoroughly.
REMOVING STUBBORN OR
STRONG FOOD STAINS AND
ODOURS
Strong smelling foods such as garlic, fish
and some vegetables such as carrots may
leave an odor or stain on the blender jug
and lid. To remove, soak blender jug and
lid for 5 minutes in warm soapy water.
Then wash with a mild detergent and warm
water, rinse well and dry thoroughly.
THE BLENDING BLADES ARE
EXTREMELY SHARP. AVOID
ANY CONTACT WITH FINGERS
AND HANDS. USE CAUTION
WHEN HANDLING AND
STORING.
NOTE:
Do not place glass jug or blade
assembly in dishwasher. Hand wash
with warm soapy water.
STORAGE
Store your Breville Blender upright with the
blender jug, lid and Integrated Measuring
Cup assembled and inserted on the motor
base or beside it. Do not place anything
on top.
17
18
19
HINTS AND TIPS ON HOW TO USE YOUR BREVILLE BLENDER HINTS AND TIPS ON HOW TO USE YOUR BREVILLE BLENDER
DO
Use Low speeds (2-4) for light mixing
such as dressings, marinades and batters
and foods that require mixing until just
combined.
Use Medium speeds (5-8) for pureeing
soups and aerating liquids.
Use High speeds (9-12) for emulsifying
ingredients such as mayonnaise and
making cocktails.
Use ‘PULSE/ICE CRUSH’ for foods that
only require short bursts of power such as
crushing ice or chopping nuts.
Ensure all foods are cut into cubes
(approximately squares) where appropriate
to achieve an even result.
Blend thick mixtures when the blender is ¼
to ½ full as they will puree more efficiently.
Place liquid ingredients (when using several
ingredients) in the blender jug before solid
ingredients, unless specified in the recipe.
Stop the blender and scrape down the
sides of the blender jug with a plastic
or rubber spatula, once or twice while
blending thick or dry mixtures.
DON’T
Do not use metal utensils as they may
damage the blades or blender jug.
Do not put more than 2 cups of ingredients
into the blender before blending
commences. After the blending process
has begun and the blades are turning you
may slowly add extra liquid or ingredients
through the opening if desired.
Do not blend a heavy mixture for more than
10 seconds. For normal blending tasks,
for example, mayonnaise, dressings etc.,
do not operate for longer than 2 minutes
for liquid ingredients or 1 minute for dry
ingredients at one time without turning off
the blender and stirring the ingredients, and
then continue blending.
Do not operate the blender without having
the blender lid in position. To add additional
ingredients whilst blending, remove the
Integrated Measuring Cup and place
ingredients through the opening in the lid.
When adding oil or other liquids during
operation, slowly pour through the hole in
the lid.
Do not fill the blender jug above the ‘MAX’
line. When the blender jug is filled at or
near the ‘MAX’ line, place one hand on the
blender lid to avoid displacement of the lid
during operation.
Do not place any objects, other than food
or liquid, into the blender whilst the motor
is running.
Do not use the blender to store food.
The blender will not knead dough or
mash potatoes.
Do not remove the blender jug while the
blender is operating. Always make sure the
blender is off by turning the Speed Selector
Dial to the ‘OFF’ position, and unplug the
power cord from the power outlet.
Do not overload the blender with more
than the specified quantity of ingredients as
doing so could cause the motor to stall. If
this occurs always make sure the blender
is off by turning the Speed Selection Dial to
the ‘OFF’ position, and unplug the power
cord from the power outlet. Remove a
portion of the mixture from the blender jug
before continuing.
Do not place glass jug or blade assembly
in dishwasher. Hand wash with warm
soapy water.
Do not place hot or boiling ingredients into
the blender; allow to cool before placing
into the blender jug.
AVOID PRESSING THE
‘PULSE/ICE CRUSH’ BUTTON
WHEN SCRAPING DOWN
SIDES OF JUG OR WHEN LID
IS REMOVED. IT IS ADVISED
THAT THE POWER CORD BE
UNPLUGED FROM THE POWER
OUTLET WHEN NOT IN USE.
THE BLENDING BLADES ARE
EXTREMELY SHARP. AVOID
ANY CONTACT WITH FINGERS
AND HANDS. USE CAUTION
WHEN HANDLING AND
STORING.
RECIPES
RECIPES – GREAT STARTERS
PESTO
Makes approx 1½ cups
1 bunch basil leaves
2 cloves garlic, peeled and halved
2 tablespoons lemon juice
3.5oz (100g) pine nuts
½ cup (125ml) olive oil
3oz (90g) grated parmesan cheese
Sea Salt to taste
Place all ingredients into blender jug, 1.
select a High Speed (9-12), blend until
all ingredients are very finely chopped
and almost smooth. Scrape down
sides of blender if necessary.
Spoon into an airtight container and 2.
chill until ready to use.
TIP:
Pesto will keep in an airtight
container in the refrigerator for a
few days.
NOTE:
Be sure to set the blender to the
‘OFF’ position and unplug the power
cord from the power outlet prior to
scraping the inside of the jug.
EGGPLANT DIP
Makes approx 2 cups
1lb (500g) eggplants, stem removed
2 cloves garlic, peeled
2 tablespoons lemon juice
2 tablespoons olive oil
1 teaspoon sea salt
½ teaspoon ground cumin
½ cup fresh parsley sprigs
Freshly ground pepper to taste
Fresh or toasted Pita bread
Rub whole eggplants all over with a 1.
little oil. Place into a baking dish and
bake in a hot oven 400ºF (200ºC)
for about 40 minutes or until skin is
beginning to darken.
Add garlic to baking dish and continue 2.
baking eggplant and garlic until garlic is
softened and eggplants are blackened
and blistered all over. Remove from
oven. Place eggplants into a plastic
bag and set aside until cool enough to
handle.
Remove skin from eggplants and 3.
discard, roughly chop the flesh and
place into blender jug with garlic,
lemon juice, olive oil sea salt and
cumin.
Select a High Speed (9-12), blend until 4.
mixture is almost smooth, scraping
down the sides of blender if necessary.
Add parsley sprigs, select ‘PULSE’ 5.
setting and pulse until parsley is finely
chopped. Season with pepper.
Serve dip with fresh or toasted Pita 6.
Bread.
NOTE:
Be sure to set the blender to the
‘OFF’ position and unplug the power
cord from the power outlet prior to
scraping the inside of the jug.
21
Loading...