Breville BGR400 User Manual
Contents
™
Instructions
Includes Recipes
BGR400
That’s the idea
1
™
Contents
Page
Introduction 1
Breville recommends safety first 4
Know your Breville Ikon Grill 6
Operating your Breville Ikon Grill 7
To use as a grill 7
To use as a sandwich press 8
Adjustable grilling height control 9
Variable temperature control 10
Care, cleaning and storage 14
Recipes R1
2
Congratulations
on the purchase of your new Breville Ikon™Grill
Breville recommends safety first
We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you,
our valued customer foremost in mind. In addition we ask that you exercise a degree of care when using any
electrical appliance and adhere to the following precautions:
Important safeguards for your Breville Ikon Grill
• Carefully read all instructions before operating and
save for future reference.
• Remove any promotional stickers or labels before
using the Ikon Grill for the first time.
• Do not place the Ikon Grill near the edge of a bench
or table during operation. Ensure the surface is
level, clean and free of water, etc.
• Do not place the Ikon Grill on or near a hot gas or
electric burner, or where it could touch a heated
oven. Use the Ikon Grill well away from walls.
• Provide adequate space above and on all sides for
air circulation around the Ikon Grill.
• Do not place the Ikon Grill on any surface that may
be affected by heat. The use of a heat resistant
mat is recommended on these surfaces.
• Always ensure the Ikon Grill is properly assembled
before use.
• Do not touch hot surfaces. Use the handles to lift
and open the top plate. Take care when using the
Adjustable Grilling Height Control.
• Allow the grill to cool down before releasing the
removable plates. Do not release the removable
plates while the grill is being operated.
• Always switch off the grill at the power outlet
before releasing the removable plates.
• Do not leave the Ikon grill unattended when in use.
• Do not place anything on top of the Ikon Grill when
the lid is closed, when in use and when stored.
• Always switch the Ikon Grill off at the power outlet,
then unplug and allow to cool, if appliance is not in
use, before cleaning, before attempting to move the
appliance, disassembling, assembling and when
storing the appliance.
• Keep the exterior housing and the non-stick
cooking plates clean. Follow the cleaning
instructions provided in this book.
• The appliance is not intended to be operated
by means of an external timer or separate
remote-control system.
4
Important safeguards for all electrical appliances
• Fully unwind the cord before use.
• To protect against electric shock, do not immerse
cord, plug or appliance in water or any other liquid.
• Do not let the cord hang over the edge of a
liquid table or counter, touch hot surfaces,
or become knotted.
• This appliance is not intended for use by young
children or infirm persons without supervision.
• Young children should be supervised to ensure that
they do not play with the appliance.
• It is recommended to inspect the appliance
regularly. Do not use the appliance if the power
supply cord, plug or appliance becomes damaged
in any way. Return the entire appliance to the
nearest authorised Breville service centre for
examination and/or repair.
• Any maintenance other than cleaning should be
performed at an authorised Breville Service Centre.
• This appliance is for household use only. Do not
use this appliance for anything other than its
intended use. Do not use in moving vehicles or
boats. Do not use outdoors.
• Do not use harsh abrasives, caustic cleaners or
oven cleaners when cleaning this appliance.
• The installation of a residual current device
(safety switch) is recommended to provide
additional safety protection when using electrical
appliances. It is advisable that a safety switch
with a rated residual operating current not
exceeding 30mA be installed in the electrical
circuit supplying the appliance. See your
electrician for professional advice.
FULLY UNWIND THE CORD FROM THE CORD STORAGE FACILITY BEFORE USE.
5
Know your Breville Ikon Grill
Stylish stainless steel exterior
Floating hinged top plate
Power ‘On’ and ‘Ready’ lights
Heavy duty metal arms
2400 watt of power
Quantanium non-stick
scratch resistant surface
Additional interchangeable
flat plate
Unique fat reducing
angled grill plates
Removable drip tray
Extendable non-skid feet
Plate release buttons for easy removal
Plate Tilt control function
Variable temperature control
Cord storage
Adjustable Grilling Height Control
6
Operating your Breville Ikon Grill
Remove any promotional materials and packaging
materials before use. Check that the cooking plates
are clean and free of dust. If necessary, wipe over
with a damp cloth.
When using the Breville Ikon Grill for the first time
you may notice a fine smoke haze. This is caused by
the heating of some of the components. There is no
need for concern.
To use as a grill
1. Insert the plug into a 230/240v power outlet and
switch the power ON. The Red power ‘On’ light
will illuminate.
2. Ensure the Removable drip tray is correctly
inserted and positioned correctly into the
appliance (see Fig 1).
Fig 1
Fig 2
4. Ensure the top plate is in the closed position for
more efficient pre-heating.
5. Turn the tilt control to the ‘Angle’ position, to
ensure better fat drainage.
6. Turn the variable temperature control to ‘Sear’
for fast heat up.
7. Allow the Ikon Grill to preheat until the green
‘Ready’ light illuminates.
8. Place meat or foods to be cooked on the bottom
cooking plate. Refer to Grilling recipes or guide
for cooking times.
It is important that the Ikon grill plates are
securely locked into position when using the grill.
3. Ensure the top and bottom grill plates are
securely locked into position (Fig 2).
FULLY UNWIND THE CORD FROM THE CORD STORAGE FACILITY BEFORE USE.
Note
7
Operating your Breville Ikon Grill
continued
8. Use the handle to close the top plate. The top
plate has a floating hinge system that is
designed to press down evenly on the food. The
Grilling Height Control on the right hand side of
the top plate is used to adjust for the thickness
of the food. The top plate must be fully lowered
to achieve grill marks onto the food.
9. When the selected ingredients are grilled, use the
handle to open the top lid. Remove the food
using a plastic spatula.
To use as a sandwich press
1. Insert the plug into a 230/240v power outlet and
switch the power on. The red power ‘On’ light
will illuminate.
2. Ensure the Removable Drip Tray is correctly
inserted and positioned back into the appliance.
3. Ensure the top and bottom plates grill plates are
securely locked into position.
4. Ensure the top plate is in the closed position for
more efficient preheating.
5. Turn the Base Plate Tilt Dial to the Flat position.
6. Turn the variable heat control dial to the
‘Sandwich’ position.
7. Allow the Ikon Grill to preheat until the green
‘READY’ light illuminates.
8. During this time, prepare the sandwich and place
it onto the base cooking plate. Always place
sandwiches towards the rear of the bottom
cooking plate.
9. Close the top cooking plate which has a floating
hinge that is designed to evenly press down on
the sandwich. The top plate must be fully
lowered to cook sandwiches. The Grilling Height
Control on the right hand side of the top plate is
used to adjust for the thickness of the sandwich.
10. Toasting should take approximately 5-8 minutes.
Exact toasting time will be a matter of
preference. It will also depend on the type of
bread and filling used.
The green ‘READY’ light will cycle on and off
during the toasting process indicating that the
correct temperature is being maintained.
Note
11. When the sandwich is cooked, use the handle to
open the top plate. Remove the sandwich using a
plastic spatula. Never use metal tongs or a knife
as these can cause damage to the non-stick
coating of the cooking plates.
Always allow the Ikon Grill to preheat until the
green ‘READY’ light illuminates.
Note
ALWAYS ALLOW THE IKON GRILL PLATES TO COOL DOWN BEFORE
RELEASING AND REMOVING.
8
Loading...