Breville BFP820BAL Instruction Handbook

the Kitchen Wizz

Instruction Book - BFP820

‰

Peel & Dice

BREVILLE
RECOMMENDS
SAFETY FIRST

At Breville we are very safety
conscious. We design and
manufacture consumer
products with the safety of you,
our valued customer, foremost
in mind. In addition we ask
that you exercise a degree of
care when using any electrical
appliance and adhere to the
following precautions.

IMPORTANT
SAFEGUARDS

READ ALL INSTRUCTIONS
BEFORE USE AND SAVE
FOR FUTURE REFERENCE

• Remove any packaging
material and promotional
labels before using the food
processor for the first time.

• Do not place the food processor
near the edge of a bench or
table during operation. Ensure
the surface is level, clean and
free of water, flour, etc. Vibration
during operation may cause
the appliance to move.

• Handle the food processor
and attachments with care ­remember the blades and discs
are razor-sharp and should be
kept out of reach of children.

• Care shall be taken when
handling the sharp cutting
blades, emptying the bowl and
during cleaning.

• Always make sure the food
processor is completely
assembled before operating.
The appliance will not operate
unless properly assembled.

• Ensure the OFF button has been
pressed, and the food processor
is switched off at the power
outlet and unplugged before
attaching the Quad blade,
dough blade, disc or
processing lid.

• Always secure the processing
bowl onto the motor base
before attaching the Quad
blade, dough blade or discs.

• Always operate the food
processor with the processing
lid securely in position.

• Do not push food into the feed
chute with your fingers or
other utensils. Always use
the food pusher provided.

• Keep hands, knives and other
utensils away from moving
Quad blade, dough blade
or discs.

2

• Do not place hands or fingers in
the bowl of the food processor
unless the motor, Quad blade,
dough blade or discs have come
to a complete stop.

• Ensure the OFF button has
been pressed to switch the
motor off and the appliance
is switched off at the power
outlet and unplugged before
removing the lid from the bowl.

• Do not use attachments other
than those provided with the
food processor.

• Do not attempt to operate the
food processor by any method
other than those described in
this booklet.

• Ensure the motor, blades or
discs have completely stopped
before disassembling. Ensure
the OFF button has been
pressed and the appliance is
switched off at the power outlet
and unplugged when not in
use, if left unattended and
before disassembling,
cleaning or storing.

• Care should be taken when
removing the food from the
processing bowl by ensuring
the motor, Quad blade, dough
blade or disc, have completely
stopped before disassembling.
Ensure the OFF button has been
pressed to switch the motor off;

the appliance is switched
off at the power outlet and
unplugged, before removing
the lid from the bowl. The
processing bowl should then
be unlocked from the motor
body and the Quad blade,
dough blade or discs carefully
removed before attempting to
remove the processed food.

• Please do not crush ICE in the
large or small processing bowls.
This will cause damage to the
blades (Quad or mini blade).
We recommend that you use
a blender for ice crushing.

• Some stiff mixtures, such
as dough may cause the
processing blade to rotate
more slowly than normal.
If this happens, do not process
for longer than 30 seconds.

• Do not process hot or boiling
liquids - allow liquids to cool
before placing into the
processing bowl. Hot liquid
can be ejected to cause injury
due to sudden steaming.

• Do not use the food processor
on slippery, unstable or
uneven surfaces such as a sink
drain board.

• To protect against electric
shock do not immerse power
cord, plug or motor base in
water or any other liquid.

3

• Do not move the food
processor whilst in operation.

• Do not leave the food processor
unattended when in use.

• Do not place any part of the
food processor in the microwave
oven.

• Do not fill bowl above marked
liquid levels or 15 cup dry level
(shredding). Always add drier
or thicker ingredients to the
processing bowl prior to
adding fluids.

• Never remove the lid while
the processor is operating.
Always use the POWER/OFF
button to stop the machine
before removing the lid.

• Keep the appliance clean.
Follow the cleaning instructions
provided in this book.

IMPORTANT
SAFEGUARDS
FOR ALL
ELECTRICAL
APPLIANCES

• Unwind the power cord fully
before use.

• Do not let the power cord
hang over the edge of a table,
counter, touch hot surfaces or
become knotted.

• This appliance shall not be used
by children. Keep the appliance
and its cord out of reach of
children. Appliances can be
used by persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and if they understand
the hazards involved.

• Children should be supervised
to ensure they do not play
with the appliance.

• It is recommended to regularly
inspect the appliance. Do not
use the appliance if power
supply cord, plug or appliance
becomes damaged in any way.
Return the entire appliance
to the nearest authorised
Breville Service Centre for
examination and/or repair.

• Any maintenance other
than cleaning should be
performed at an authorised
Breville Service Centre.

• This appliance is for household
use only. Do not use this
appliance for anything other
than its intended use. Do not
use in moving vehicles or
boats. Do not use outdoors.
Misuse may cause injury.

4

• Cleaning and user maintenance
shall not be made by children
without supervision.

• Always disconnect the
appliance from the supply
if it is left unattended
and before assembling,
disassembling or cleaning.

• When mixing yeast dough,
the operating time of the food
processor should not longer than
30 seconds. Allow the appliance
to cool down before next use.

• In order to avoid a hazard due
to inadvertent resetting of the
thermal cut-out, this appliance
must not be supplied through
an external switching device,
such as a timer, or connected
to a circuit that is regularly
switched on and off by the utility.

• The installation of a residual
current device (safety switch)
is recommended to provide
additional safety protection
when using electrical appliances.
It is advisable that a safety
switch with a rated residual
operating current not exceeding
30mA be installed in the
electrical circuit supplying the
appliance. See your electrician
for professional advice.

• Authorised Breville Service
Centres can be found on our
website www.Breville.com.au
Alternatively, you can contact
the Breville Customer Care
Centre by phone on

1300 273 845 or email
[e-mail]

WARNING

• To avoid possible malfunction
of the processing bowl’s
auto switch, do not place the
processing lid in the locked
position when the appliance is
not in use.

• The processing blades and
discs are extremely sharp,
handle with care at all times.
Avoid contact with moving
parts during operation. Keep
hands, hair, clothing, spatulas
and other utensils out of
food processor feed chute
to prevent personal injury or
damage to the mixer. Always
use the food pusher to push
the food down the feed chute.

FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS

5

Components

A. Small food pusher

For improved processing control of
smaller ingredients. It also doubles as
a measuring cup for adding/measuring

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

ingredients. The food processor will run
continually whether the small pusher is in
or out.

B. Medium pusher

The food processor will run continually
whether the medium pusher is in or out.

C. Large food pusher

For pushing food down the feed chute.
The food processor will not start unless
the large pusher is correctly in place.

D. Extra wide 14cm chute

For larger ingredients.

E. Feed chute safety system

Prevents the motor from operating unless
the bowl and lid are correctly locked in
position, and large feed pusher is inserted.

F. Processing lid

Locks onto the processing bowl.

G. Silicone seal

Reduces the chance of leakage while
processing large volumes of liquid
ingredients.

H. Mini bowl

For better control when processing
small quantities.

I. Processing bowl with handle

15 cup bowl for dry ingredients and
10 cups for diced and liquid (thick, wet
ingredients e.g. soups). The processing
bowl locks onto the motor base.

J. LCD display

Displays the timing function.

K. Count up & count down timer

Used to set desired time required for
processing. Can count up or down,
stopping the processor once the time is
reached in count down mode.

L. POWER|OFF button
M. START|PAUSE button

Pauses the Timer.

6

N. PULSE button

Press down and hold briefly for

Q

short bursts of power. The motor will
automatically stop after the PULSE button
has been released.

O. Direct drive motor base

2000W induction motor with safety
braking system.

R

P. Non-skid rubber feet

For added safety and stability.

Q. Dough blade

Blunt blade designed for a softer action of
combining dough ingredients.

S

R. Mini processing blade

Use this blade for small quantities with
the mini bowl for chopping, mixing and
blending a variety of ingredients.

S. Quad® processing blade

T

Swift action for chopping, mixing, and
blending a variety of ingredients.

T. Quad® blade safety cover
U. Whisk/emulsifying disc

Use this attachment for whisking of eggs

U

and cream.

V. Adjustable slicer

Use this disc for slicing ingredients.
Able to slice from 0.3–8.0mm thick.

V

W. French fries cutter

Use this disc for cutting vegetables to
make french fries.

X. Julienne disc

W

Use this disc for julienning vegetables.

Y. Reversible shredder

Use one side for small/thin shredding and
the other side for coarse shredding.

X

Z. Disc spindle

Use with the reversible shredder, julienne,
chip cutting, whisk, potato peeler and
adjustable slicing discs in position.

Y

Z

7

AA

AB

AC

AD

AE

AF AG AH

AA. Peeler disc

Peels potatoes and other round,
firm produces.

AB. Dicing disc

For dicing 12mm cubes.

AC. Dicing grid

For dicing 12mm cubes.

AD. Dicing Distributor

Only use for Dicing bigger quantities
(more than 5 cups). Distributes diced food
evenly in bowl

AE. Cleaning cap

To clean the 12 mm dicing grid.
Attaches to the large food pusher.

AF. Geared spindle

Use with the dicing kit.

AG. Plastic spatula

For scraping the sides of the bowl helping
to process ingredients evenly.

AH. Cleaning brush

For cleaning the processor bowl, blades,
discs, dicer grid and cleaning cap.

AI. Storage box

For storing all accessories.

AI

8

Assembly

BEFORE FIRST USE

• Before using your food processor for the
first time, remove any packaging material
and promotional labels. Ensure the POWER
button is OFF and the food processor is
unplugged.

• Be careful when handling the blades and
discs as they are extremely sharp.

• Wash the processing bowl, processing lid
and all attachments in warm soapy water
with a soft cloth. Rinse and dry thoroughly.
All attachments except the geared spindle
and large food pusher may be washed in the
dishwasher.

• When first using your food processor, you
may notice an odour coming from the motor.
This is normal and will dissipate with use.

• Always use the food processor on a dry,
level work surface.

ASSEMBLY

Motor Base and Bowl

1. Position the processing bowl onto the motor
base with the handle in line with the ALIGN
HANDLE graphic on the motor base.

2. Turn the bowl clockwise until the handle
locks to the front. The processing bowl
should now be securely locked into position.
The food processor will not operate unless
the bowl is locked into position correctly.

9

Spindles and Discs

1. Before placing the lid onto the processing
bowl, choose your spindle and position
it over the coupling in the center of the
processing bowl. Then position your chosen
attachment over the spindle. Please note
that the Quad Blade and Dough Blade do
not require a spindle for processing.

2. The disc spindle is required when using
the following discs: adjustable slicer,
reversible shredder, julienne, french fries
cutter and the peeler. Do not use the geared
spindle for those attachments. Failing to use
the disc spindle will damage the parts, and
incorrect use this way may cause the parts
to fuse together.

Julienne disc

French fries cutter

3. The geared spindle is required when
using the dicing kit. To dice vegetables
or fruit insert the geared spindle into
the bowl first, followed by the dicing
grid, ensuring to align with the 4 tabs
in the bowl, then insert the dicing disc.
Make sure you follow the right order.
If you intend to dice larger quantities
(more than 5 cups) please insert the dicing
distributor after placing your geared spindle
into the bowl. The dicing distributor will
help to distribute diced food evenly across
the bowl. Do not use your dicing kit with the
disc spindle. Always use the geared spindle.

Dicing blade

Dicing grid

10

Slicing disc

Shredding disc

Peeler

Disc spindle

Dicing distributor

Geared spindle

WARNING

Do not touch the blades
of the Dicing Grid.
They are extremely sharp.

Mini Processing Bowl

The mini processing bowl fits inside the
main bowl.

Lid

Place lid onto the processing bowl so that
the ALIGN | LOCK graphics on the lid and
handle align. To LOCK the lid, hold the
chute and turn clockwise so that the handle
parts align. Locking the lid correctly will
engage the interlocking safety catch on the
handle, and allow the motor to run.

The mini processing blade gives you
maximum control for small quantities.

Do not use any spindle, or the processing
discs. Use only the mini processing blade
in the mini bowl. Please note that the mini
blade cannot be used in the main processing
bowl.

11