Instructions for use
Includes recipes
Mini Wizz
Perfect for processing small quantities
Model BFP100
Contents
Page
Introduction 3
Breville recommends safety first 4
Know your Breville Mini Wizz 6
How to operate your Breville Mini Wizz 7
Handy hints for best results 9
Care, cleaning and storage 11
Recipe ideas R2
2
Congratulations
on the purchase of your new Breville Mini Wizz
Breville recommends safety first
We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you,
our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any
electrical appliance and adhere to the following precautions:
Important safeguards for your Breville Mini Wizz
• Carefully read all instructions before operating and
save for future reference.
• Remove any packaging material and promotional
stickers before using the Mini Wizz for the first time.
• Do not place the Mini Wizz near the edge of a
bench or table during operation. Ensure the surface
is level, clean and free of water, flour, etc.
•Do not place the Mini Wizz on or near a hot gas
or electric burner, or where it could touch a
heated oven.
• Handle the Mini Wizz and attachments with care –
remember the blade is very sharp and should be
kept out of reach of children.
• Always make sure the Mini Wizz is completely
assembled before operating. The appliance will not
operate unless properly assembled.
• Ensure the Mini Wizz is turned off at the ON/OFF
switch, the power is switched off at the power
outlet and the cord is unplugged from the power
outlet before attaching the blade, whisk or
processing lid.
• Always secure the processing bowl onto the motor
base before attaching the blade or whisk.
• Always operate the Mini Wizz with the processing
lid in position.
• Do not use attachments other than those provided
with the Mini Wizz.
• Do not attempt to operate the Mini Wizz by any
method other than those described in this booklet.
• Do not process hot or boiling liquids – allow liquids
to cool before placing into the processing bowl.
• Do not operate the appliance continuously on
heavy loads for more than 1 minute. Allow the
motor to rest for 10 minutes after each 1 minute
of operation. None of the recipes in this manual
are considered a heavy load.
• Do not operate the appliance with a heavy load.
• Do not run the motor without food in the bowl.
• Always ensure the Mini Wizz is turned off at the
ON/OFF switch, the power is switched off at the
power outlet and the cord is unplugged from the
power outlet before attempting to move the
appliance, when not in use, if left unattended
and before disassembling, cleaning or storing.
• Do not use the Mini Wizz on metal surfaces,
for example a sink drain board.
• To protect against electric shock do not immerse
the motor base cord or power plug in water or
any other liquid.
• Do not move the Mini Wizz during operation
• Do not leave the Mini Wizz unattended
when in use.
• Keep the appliance clean. Follow the cleaning
instructions provided in this book.
4
Important safeguards for all electrical appliances
• Unwind the cord before use.
• Do not let the cord hang over the edge of a table
or counter, touch hot surfaces or become knotted.
• This appliance is not intended for use by young
children or infirm persons without supervision.
• Young children should be supervised to ensure that
they do not play with the appliance.
• It is recommended to regularly inspect the
appliance. Do not use the appliance if power supply
cord, plug or appliance becomes damaged in any
way. Return the entire appliance to the nearest
authorised Breville service centre for examination
and/or repair.
• Any maintenance, other than cleaning, should be
performed at an authorised Breville Service Centre.
• This appliance is for household use only. Do not use
this appliance for anything other than its intended
use. Do not use moving vehicles or boats. Do not
use outdoors.
• The installation of a residual current device (safety
switch) is recommended to provide additional
safety protection when using electrical appliances.
It is advisable that a safety switch with a rated
residual operating current not exceeding 30mA
be installed in the electrical circuit supplying
the appliance. See your electrician for
professional advice.
5
Know your Breville Mini Wizz
Release lever
Lid for processing bowl
with drop holes for emulsion
500 ml processing bowl
for use with chopping/mixing
blade or whisk attachment
Stainless steel universal chopping/mixing blade
Release button
ON/OFF switch
Cord wrap facility
(under the motor base)
Accessories: Storage Lid
Whisk attachment
6
3 speed soft touch control
CHOP, WHISK, GRIND
250 watt motor
for high speed processing
How to operate your Breville Mini Wizz
Before using your Breville Mini Wizz, remove all packaging materials and promotional materials, being careful
when handling the blade, as it is very sharp. Wash the bowl, lid and other attachments in warm, soapy water.
Chopping, grinding and whisking
• CHOP function button – use for pulsing and rapid
chopping/mixing with the chopping/mixing blade
rotating clockwise.
• GRIND function button – use for pulsing and rapid
grinding with the chopping/mixing blade rotating
anti-clockwise.
• WHISK function button – use for whisking
and blending with the whisk attachment
rotating anti-clockwise.
1. Place the motor base on a dry, level surface.
Ensure the Mini Wizz is turned off at the ON/OFF
switch, the power is switched off at the power
outlet and the power plug is unplugged from the
power outlet.
2. Place the processing bowl over the motor
shaft and turn the bowl slightly to the left
until it drops down into position on the motor
body. Gently turn the bowl clockwise to lock
into position.
3. Place the chopping/mixing blade onto the
motor shaft.
4. Add food to be processed into the bowl. For
quantities refer to page 9
5. Place the lid on top of the bowl with the raised
locking tab facing towards the release lever on
the rear column on the motor base. Turn the lid
clockwise until the lid locks into place.
7
How to operate your Breville Mini Wizz
continued
6. Push the release lever on the rear column of the
motor base down onto the raised locking tab of
the lid until it locks in place.
The Mini Wizz will not operate until the lid is
locked into the correct position and the release
lever is locked onto the processing lid.
Note
7. Insert the power plug into a 230/240V power
outlet and switch on at the power outlet.
8. Press the ON/OFF switch to ON and select either
the Chop or Grind buttons to start the
chopping/mixing or grinding functions. Press the
appropriate button in short bursts. (Refer to page
9 for approximate times)
9. To whisk ingredients, use the Whisk attachment
and the Whisk button. Remove the lid and
chopping/mixing blade by following steps
“How to disassemble the Mini Wizz” on Page 10.
Attach the Whisk attachment by following steps 3
to 8.
The processing lid has two small holes in the
indents on top so that liquid ingredients can be
added whilst the Mini Wizz is in operation.
A storage lid has been provided for storing food
in the processing bowl if required.
Note
8