Breville BBL420 User Manual

Breville Customer Service Centre
Australian Customers
Mail: PO Box 22
Phone: 1300 139 798
Fax: (02) 9384 9601
Customer Service:
Email:
askus@breville.com.au
www.breville.com.au
Breville is a registered trademark of Breville Pty. Ltd. A.B.N. 98 000 092 928.
Due to continued product improvement, the products illustrated/photographed
in this brochure may vary slightly from the actual product.
Copyright Breville Pty. Ltd. 2011.
New Zealand Customers
Mail: Private Bag 94411
Botany Manukau 2163 Auckland NEW ZEALAND
Phone:
0800 273 845
Fax: 0800 288 513
Customer Service:
Email:
askus@breville.com.au
BBL420 Issue - C11
the Kinetix® Aero
Instruction Booklet
BBL420
CONGRATULATIONS
on the purchase of your new
Breville Kinetix® Aero
CONTENTS
4 Breville recommends safety first
8 Know your
Breville Kinetix
®
Aero
10 Operating your Breville
Kinetix
®
Aero
14 Care, cleaning & storage
16 Hints & Tips
18 Recipes
3
BREVILLE RECOMMENDS SAFETY FIRST
At Breville we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE
Carefully read all instructions before
operating the Breville Blender for the first time and save for future reference.
Remove and safely discard any
packaging material and promotional labels before using the blender for the first time.
To eliminate a choking hazard for young
children, remove and safely discard the protective cover fitted to the power plug of this appliance.
Do not place the blender near the edge
of a bench or table during operation. Ensure the surface is level, clean and free of water and other substances. Vibration during operation may cause the appliance to move.
Do not use the blender on a sink
drain board.
Do not place the blender on or near a hot
gas or electric burner, or where it could touch a heated oven.
Handle the blender and attachments
with care – remember the blades are razor-sharp and should be kept out of the reach of children.
Care shall be taken when handling the
sharp cutting blades, emptying the bowl and during cleaning.
Always ensure the blender is
completely assembled before operating. The blender will not operate unless properly assembled.
Do not use attachments other than those
provided with the blender.
Do not attempt to operate the blender by
any method other than those described in this booklet.
Always secure the blade assembly onto
the blender jug before attaching to the motor base.
Ensure the Variable Speed dial is in
the OFF position and the blender is switched off at the power outlet and the power cord is unplugged before attaching the blender jug.
Always operate the blender with the
blender jug lid in position.
Keep fingers, hands, knives and other
utensils away from moving blades.
Do not place hands or fingers into the
blender jug unless the motor and blades have come to a complete stop. Ensure the Variable Speed dial is in the OFF position and the appliance is switched off at the power outlet and the power cord is unplugged before removing the lid from the blender.
Ensure the motor and the blades
have completely stopped before disassembling. Ensure the Variable Speed Dial is in the OFF position and the appliance is switched off at the power outlet and the power cord is unplugged from the power outlet before attempting to move the blender, when not in use, if left unattended and before disassembling, cleaning or storing.
Care should be taken when removing
the food from the blender jug by ensuring the motor and the blades have completely stopped before disassembling. Ensure the Variable Speed Dial is turned to the OFF position, the appliance is switched off at the power outlet and unplugged, before
4
BREVILLE RECOMMENDS SAFETY FIRST
removing the lid from the blender jug. The blender jug should then be removed from the motor body and the food carefully removed before attempting to remove the blade assembly.
Do not operate the blender continuously
for periods longer than 2 minutes on any setting. None of the recipes in this book are considered a heavy load. If the blender is operated continuously for too long, it should be allowed to rest for 25­30 minutes before recommencing.
Allow the motor to rest for 1 minute
between each use.
Do not operate the appliance
continuously with heavy loads for more than 10 seconds.
Do not process hot or boiling liquids –
allow liquids to cool before placing into the blender jug.
Do not move the blender whilst
in operation.
Do not leave the blender unattended
when in use.
Do not place any part of the blender in
the dishwasher or microwave oven.
Do not place anything on top of the
blender jug when the lid is on, when in use and when stored.
Keep the blender clean. Follow the
cleaning instructions provided in this book.
Always turn the power off at the power
outlet and then remove the power plug from the power outlet before attempting to move the appliance, when the appliance is not in use and before cleaning or storing.
MOTOR OVERLOAD PROTECTION
Your blender is equipped with overload
protection.
If your blender is overloaded the motor
will stop and the “overload protection” light will flash, next to the ice crush button.
Please do not attempt to use the blender
while the “overload protection” light is flashing.
Once the warning light stops flashing
(this could take up to 30 minutes) the blender has cooled sufficiently and is ready to use again. Reselect the desired speed or function. If you have turned the blender off you will need to switch it back on, wait for the flashing light to stop then reselect the desired speed or function.
We recommend removing a portion of
the mixture, cutting food into smaller pieces of even sizing and / or processing a smaller amount per batch.
SAVE THESE INSTRUCTIONS
5
5
BREVILLE RECOMMENDS SAFETY FIRST
IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES
Unwind the power cord fully before use.
Do not let the power cord hang over
the edge of a bench or table, touch hot surfaces or become knotted.
To protect against electric shock do not
immerse the power cord, power plug or motor base in water or any other liquid.
The appliance is not intended for use
by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
It is recommended to regularly inspect
the appliance. To avoid a hazard do not use the appliance if power cord, power plug or appliance becomes damaged in any way. Return the entire appliance to the nearest authorised Breville Service Centre for examination and/or repair.
Any maintenance other than cleaning
should be performed at an authorised Breville Service Centre.
This appliance is for household use only.
Do not use this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors. Misuse may cause injury.
The installation of a residual current
device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.
6
BREVILLE RECOMMENDS SAFETY FIRST
7
KNOW
your Breville Kinetix® Aero
KNOW YOUR BREVILLE KINETIX® AERO
A E
B
C
F
D
A. Inner measuring cup
For adding ingredients whilst blending and doubles as a blade removal tool.
B. Large 1.6 litre glass jug C. Illuminating pulse/ice crush button D. Variable speed control
With 12 settings.
G
E. Breville Assist™ lid
Ring pull ensures the lid is easy to remove yet sealed tight during operation.
F. Kinetix‰ blade assembly G. Cord storage
9
Loading...
+ 22 hidden pages