Breville BBL410 User Manual

BBL410 Power Blender

BBL410_IB_FA.indd 1 13/7/09 1:29:44 PM

2

Contents

Page

Breville Recommends Safety First 4

Kno

w your Breville Power Blender 6

Opera

ting Your Breville Power Blender 7

Care,

Cleaning and Storage 10

Hints and

Tips on how to use your Breville Power Blender 11

Recipes

R2

BBL410_IB_FA.indd 2 13/7/09 1:29:44 PM

3

Congratulations

on the purchase of your new Breville Power Blender

BBL410_IB_FA.indd 3 13/7/09 1:29:45 PM

4

Breville recommends safety first

At Breville we are very safety conscious. We design and manufacture consumer products
with the safety of you, our valued customer, foremost in mind. In addition we ask that you
exercise a degree of care when using any electrical appliance and adhere to the following
precautions.

Carefully read all instructions before operating the
Breville Blender for the first time and save for future
reference.

Remove and safely discard any packaging material
and promotional labels before using the blender for
the first time.

To eliminate a choking hazard for young children,
remove and safely discard the protective cover fitted
to the power plug of this appliance.

Do not place the blender near the edge of a bench
or table during operation. Ensure the surface is
level, clean and free of water and other substances.
Vibration during operation may cause the appliance
to move.

Do not use the blender on a sink drain board.
Do not place the blender on or near a hot gas or electric

burner, or where it could touch a heated oven.
Handle the blender and attachments with care

– remember the blades are razor-sharp and should be
kept out of the reach of children.

Care shall be taken when handling the sharp cutting
blades, emptying the bowl and during cleaning.

Always ensure the blender is completely assembled
before operating. The blender will not operate unless
properly assembled.

Do not use attachments other than those provided
with the blender.

Do not attempt to operate the blender by any method
other than those described in this booklet.

Always secure the blade assembly onto the blender
jug before attaching to the motor base.

Ensure the Speed Selection dial is in the ‘Off’ position
and the blender is switched off at the power outlet
and the power cord is unplugged before attaching the
blender jug.

•

•

•

•

•

•

•

•

•

•

•

•

•

Always operate the blender with the blender jug lid
in position.

Keep fingers, hands, knives and other utensils away
from moving blades.

Do not place hands or fingers into the blender jug
unless the motor and blades have come to a complete
stop. Ensure the Speed Selection dial is in the ‘Off’
position and the appliance is switched off at the
power outlet and the power cord is unplugged before
removing the lid from the blender.

Ensure the motor and the blades have completely
stopped before disassembling. Ensure the Speed
Selection Dial is in the ‘Off’ position and the appliance
is switched off at the power outlet and the power cord
is unplugged from the power outlet before attempting
to move the blender, when not in use, if left unattended
and before disassembling, cleaning or storing.

Care should be taken when removing the food from the
blender jug by ensuring the motor and the blades have
completely stopped before disassembling. Ensure the
Speed Selector Dial is turned to the ‘Off’ position,
the appliance is switched off at the power outlet and
unplugged, before removing the lid from the blender
jug. The blender jug should then be removed from the
motor body and the food carefully removed before
attempting to remove the blade assembly.

Do not operate the blender continuously for periods
longer than 2 minutes on any setting. None of the recipes
in this book are considered a heavy load. If the blender is
operated continuously for too long, it should be allowed
to rest for 25-30 minutes before recommencing.

Allow the motor to rest for 1 minute between each use.
Do not operate the appliance continuously with heavy

loads for more than 10 seconds.
Do not process hot or boiling liquids – allow liquids to

cool before placing into the blender jug.

•

•

•

•

•

•

•

•

•

IMPORTANT SAFEGUARDS FOR YOUR BREVILLE POwER BLENDER

BBL410_IB_FA.indd 4 13/7/09 1:29:45 PM

5

Unwind the power cord fully before use.
Do not let the power cord hang over the edge of

a bench or table, touch hot surfaces or become
knotted.

To protect against electric shock do not immerse the
power cord, power plug or motor base in water or any
other liquid.

The appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.

Children should be supervised to ensure that they do
not play with the appliance.

It is recommended to regularly inspect the appliance.
To avoid a hazard do not use the appliance if power
cord, power plug or appliance becomes damaged in
any way. Return the entire appliance to the nearest
authorised Breville Service Centre for examination
and/or repair.

•

•

•

•

•

•

Any maintenance other than cleaning should be
performed at an authorised Breville Service Centre.

This appliance is for household use only. Do not use
this appliance for anything other than its intended use.
Do not use in moving vehicles or boats. Do not use
outdoors. Misuse may cause injury.

The installation of a residual current device (safety
switch is recommended to provide additional safety
protection when using electrical appliances. It is
advisable that a safety switch with a rated residual
operating current not exceeding 30mA be installed in
the electrical circuit supplying the appliance. See your
electrician for professional advice.

•

•

•

IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES

Do not move the blender whilst in operation.
Do not leave the blender unattended when in use.
Do not place any part of the blender in the dishwasher

or microwave oven.

•

•

•

Do not place anything on top of the blender jug when
the lid is on, when in use and when stored.

Keep the blender clean. Follow the cleaning
instructions provided in this book.

•

•

BBL410_IB_FA.indd 5 13/7/09 1:29:45 PM

6

Know Your Breville Power Blender

BBL410 BREVILLE POwER BLENDER

5

Inner measuring cup

for adding ingredients whilst blending and doubles as a blade
removal tool.

Large 1.6 litre glass jug
Illuminating pulse/ice crush button
Variable speed control

with 12 settings

1.

2.

3.

4.

Breville Assist™ lid

ring pull ensures the lid is easy to remove yet sealed tight
during operation.

6 way serrated stainless steel blade
Cord storage
Blade assembly

removable for easy cleaning

5.

6.

7.

8.

2

3

4

6

8

1

7

BBL410_IB_FA.indd 6 13/7/09 1:29:48 PM

7

Before first use

Remove and safely discard any packaging material and
promotional labels. Disassemble the blender by following
steps 1 to 3 in “Disassembling the Blender”. Wash the lid,
inner cup, blender jug, silicon seal and blade assembly
(refer to Disassembly instructions) in warm, soapy water
with a soft cloth. Rinse and dry thoroughly. Wipe the
motor base with a damp cloth and dry thoroughly.

Assembling and attaching the
blender jug

Place the motor base on a flat, dry surface such as a
bench top. Ensure that the Speed Selection Dial is in
the ‘Off’ position and the appliance is switched off at
the power outlet and the power cord is unplugged.

Place the blender jug upside down on a flat dry
surface such as a bench top. Place the silicon seal
onto the base of the blade assembly.

Hold the jug handle and place the blade assembly
onto the base of jug, turn in a clockwise direction
until firmly in position.

Turn the blender jug upright and insert onto the motor
base. The handle of the blender can be positioned to
the left or the right of the appliance. Add food or liquid
into the blender jug ensuring not to exceed the ‘MAX’
mark. Place the blender lid firmly into position on the
top of the blender jug. Insert the clear inner cup into
the blender and turn until secured into position.

1.

2.

3.

4.

Operating Your Breville Power Blender

Plug the power cord into a 230/240V power outlet
and switch on.

Ensure the blender is in the ‘Off’ position.

5.

6.

NOTE

The blending blades are extremely sharp. Avoid any
contact with fingers and hands.

NOTE

When adding oil or other liquids during the operation,
turn the clear inner cup to the unlocked position and
pour through the hole in the lid. The inner cup can
be removed to add ingredients or check the texture
of the ingredients.

NOTE

The blender features a Breville Assist™ Lid. This
allows the lid to fit tightly onto the blender jug,
avoiding displacement during operation. The ring
pull design allows easy removal of the lid with a
simple leverage action.

NOTE

Do not fill the blender jug above the ‘MAX’ line.
When the blender jug is filled at or near the ‘MAX’
line place one hand on the blender lid to avoid
displacement of the lid during operation.

BBL410_IB_FA.indd 7 13/7/09 1:29:49 PM

8

Disassembling your blender for
cleaning, care and storage

Always ensure the Blender is off by turning the dial to
the ‘Off’ position. Then switch off at the power outlet
and unplug the power cord.

Remove the blender jug from the motor base by
grasping the handle and lifting the jug in an upward
direction.

1.

2.

Operating Your Breville Power Blender continued

Select the required speed (1 to 12) by turning the dial to
the corresponding speed.

Operate the blender only for the appropriate amount of
time required – do not over blend.

PULSE - For ingredients that require short bursts
of power, like crushing ice, press the ‘Pulse/Ice
Crush’ button. The pulse feature can be used while
the blender is in the ‘Off” position. When pressed,
the pulse button will illuminate and will continue to
operate until it is released.

At the end of use, always ensure the blender is
turned to the ‘off’ position. Then switch the appliance
off at the power outlet and unplug the cord. Ensure
the motor and blades have completely stopped
before attempting to move the appliance, or when
the blender is not in use and before disassembling,
cleaning and storing.

7.

8.

N

EVER PLACE ANYTHING OTHER THAN FOOD AND LIQUIDS IN THE BLENDER wHILST THE MOTOR IS RUNNING.

NOTE

To stop blending at any time, return the dial to the
‘Off’ position.

The speed can be changed at any time during the
blending process by rotating the dial to the desired
speed.

NOTE

The maximum amount of ice cubes the blender
can blend at any one time is 1 standard ice tray
or 250g.

NOTE

Use the ‘Pulse’ button when the food that is being
processed is too thick or coarse to circulate within
the blender jug.

NOTE

During the blending process, ingredients may stick
to the side of the blender jug. To push the food back
onto the blades, turn the blender to the ‘off’ position,
switch off at the power outlet and remove the
power cord.

Remove the lid and use a plastic spatula to scrape
down the sides of the jug. Replace the lid before
recommencing blending.

NOTE

If any moisture or liquid appears on top of the motor
base during blending, turn the blender to the ‘off’
position, switch off at the power outlet and remove
the power plug. Remove the blender jug. Wipe the
motor base immediately with a dry cloth or paper
towel to absorb the liquid. Check the blade assembly
is correctly assembled.

BBL410_IB_FA.indd 8 13/7/09 1:29:49 PM