Braun 199 User Manual

1
washable
washable
199
4845
washable
www.braun.com/register
Type 5743
washable
1
F/C30B
p
o
t
s
t
r
a
t
s
2
3
washable
washable
3
washable
4
5
7
6
washable
stop
start
oil
2
English
Our products are designed to meet the highest standards of quality, functionality and design. We hope you enjoy your new Braun Shaver.
Warning
• Your shaver is provided with a special cord set with integrated Safety Extra Low Voltage power supply. Do not exchange or manipulate any part of it. Otherwise there is risk of electric shock.
• This appliance is not intended for use by children or persons with reduced physical or mental capabilities, unless they are given supervision by a person responsible for their safety. In general, we recommend that you keep the appliance out of reach of children.
Description
1 Shaver foil 2 Cutter block 3 Release button 4 On/off switch («start/stop») 5 Long hair trimmer 6 Charging light (green) 7 Special cord set
Charging
The best environmental temperature for charging is between 15 °C and 35 °C.
• Connect the shaver to an electrical outlet with the motor switched off and charge it for at least
• The green charging light (6) shows that the shaver is being charged.
• Once the shaver is completely charged, discharge the shaver through normal use. Then recharge to full capacity.
• A full charge provides up to 30 minutes of cordless shaving time depending on your beard growth. However, the maximum battery capacity will only be reached after several charging/discharging cycles.
• If the rechargeable batteries are discharged, you may also shave by connecting the shaver to an electrical outlet via the special cord set.
3
8 hours.
Shaving
Press the on/off switch (4) to turn the shaver on.
Trimmer:
When the long hair trimmer (5) is activated, it allows the controlled trimming of moustache or sideburns.
Tips for the perfect shave
• We recommend that you shave before washing, as the skin tends to be slightly swollen after washing.
• Hold the shaver at right angles (90°) to the skin. Stretch the skin and shave against the direction of beard growth.
• To maintain 100% shaving performance, replace the shaver foil and cutter block at least every 18 months or when worn.
Cleaning
This appliance is suitable for cleaning under an open water tap.
Warning: Detach the hand-held part from the power supply before cleaning it in water.
Regular cleaning ensures better shaving performance. Rinsing the shaving head after each shave under running water is an easy and fast way to keep it clean:
• Switch the shaver on (cordless) and rinse
the shaving head under hot running water. A natural based soap may also be used provided it contains no particles or abra­sive substances. Rinse off all foam and let the shaver run for a few more seconds.
• Next, switch off the shaver and press the
release buttons. Remove the shaver foil and the cutter block. Then leave the disas­sembled shaving parts to dry.
Alternatively, you may clean the shaver using the brush provided:
• Switch off the shaver. Remove the shaver
foil.
• Using a brush, clean the cutter block and the inner area of the shaver head. However, do not clean the shaver foil with the brush as this may damage the foil.
Keeping your shaver in top shape
If you regularly clean the shaver under water, then once a week apply a drop of light machine oil onto the long hair trimmer and shaver foil.
Preserving the batteries
In order to maintain the optimum capacity of the rechargeable batteries, the shaver has to be fully discharged (by shaving) every 6 months approximately. Then recharge the shaver to full capacity. Do not expose the shaver to temperatures higher than 50 °C for extended periods of time.
Replacing the shaving parts
To maintain 100% shaving performance replace your foil and cutter block at least every 18 months or when worn. Change both parts at the same time for a closer shave with less skin irritation. (Shaver foil and cutter block: 30B)
Environmental notice
This product contains rechargeable batteries. In the interest of protecting the environment, please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country.
Subject to change without notice.
This product conforms to the European Directives EMC 2004/108/EC and Low Voltage 2006/95/EC.
For electric specifications see printing on the special cord set.
4
Guarantee
We grant a 2 year guarantee on the product commencing on the date of purchase. Within the guarantee period we will eliminate any defects in the appliance resulting from faults in materials or workmanship, free of charge either by repairing or replacing the complete appliance at our discretion.
This guarantee extends to every country where this appliance is supplied by Braun or its appointed distributor.
This guarantee does not cover: damage due to improper use, normal wear and tear (e.g. shaver foil or cutter block) as well as defects that have a negligible effect on the value or operation of the appliance. The guarantee becomes void if repairs are undertaken by unauthorised persons and if original Braun parts are not used.
To obtain service within the guarantee period, hand in or send the complete appliance with your sales receipt to an authorised Braun Customer Service Centre.
This guarantee in no way affects your rights under statutory law.
Braun Infolines
GB
IRL
HK
0800 783 70 10
1 800 509 448
852-25249377
(Audio Supplies Company Ltd.)
www.service.braun.com
Braun GmbH Frankfurter Straße 145 61476 Kronberg / Germany
98939281/II-09 UK
Loading...