126
www.bradyid.com
Laser Printable Materials Chart
MATERIALS CHART
LASER LABELS
LASER LABELS
Max. Service
Type Temp. °F (°C) Color Finish Use Special Properties
NYLON CLOTH
B-799 293 (145)* White Matte Aerospace and military cable marking Repositionable
PAP ER
B-124 150 (66) White/Colors Matte 110 terminal block marking for Available in green, purple, yellow, blue,
telecommunications red, brown, white, orange and gray
B-759 193 (90) White/Colors Matte Bar code and general labeling applications Excellent toner adhesion
POLYOLEFIN FILM
B-409 193 (90) White Matte Bar code labels and general identification Abrasion resistant
B-410 212 (100) White Matte Tamper-evident label Label destroys upon removal
POLYESTER
B-361 230 (110) White Matte Wire and cable marking, self-laminating Low halogen and sulfur content
B-707 267 (130) White Matte Electronic component labeling; general identification Rough surface application; Stronger bond
to low surface energy plastics
B-709 158 (70) White Matte Electronic component, bar code labels and Removable
general temporary identification
B-712 221 (105) Clear Matte Electronic component labeling; general identification Rough surface application; Stronger bond to
low surface energy plastics
B-722 221 (105) Clear Matte Rating plates, name plates, general-purpose Translucent
printable overlaminate
B-747 267 (130) White/Yellow Matte Electronic PCB component, bar code labels Excellent solvent and smudge resistance;
and equipment labeling high-resolution printing; available in white only
B-773 248 (120) Silver Matte Rating plates and electronic component marking Adheres to a variety of surfaces; metallized
POLYIMIDE
B-652 572 (300)* Amber Matte Underside PC board and SMT component marking Withstands extremely high temperatures
B-658 518 (270)* Amber Matte SMT component marking Label will remove cleanly after
high temperature exposure
TEDLAR
®
B-737 266 (130) White Matte Aerospace and militar y cable marking Repositionable
Te d l ar
®
is a registered trademark of DuPont.
* 5 minutes
®
®
®
The high resolution of laser printing makes it
possible to generate readable, dense bar codes on
labels small enough to fit into limited application
space. (B-747 pictured)
*These materials are UL recognized.
*These materials are CSA approved.
*Refer to the full page charts on pages 280-281 for more
information and complete listing of parts.
®