• Reliable liquid-filled thermostat
• Integral strainer checkstops on inlets
• Adjustable set point within temperature range
• Accurate temperature control
• Positive shutoff of hot supply when cold supply is lost
• Easy installation and serviceability
• Dirt and lime resistant
• Factory assembled and tested
• Universal mounting capability
• Cabinet Features
— 18 gauge body & door
— Left hand hinge
— Cylinder Lock
— Inlet/outlet knock out holes for mounting flexibility
— Stainless steel or baked white enamel finishes
— Surface mounted or recessed style with flange
TMV45 & TMV80
Standard Thermostatic Mixing Valves
Valve Specifications
Maximum Operating Pressure
125 PSI (860 kPA)
Maximum Inlet Temperature
200° F (93° C)
Temperature Range Set Point
Std.
Low
High
85° F (29° C) to 135° F (57° C)
50° F (10° C) to 100° F (38° C)
100° F (38° C) to 150° F (66° C)
110° F (43° C)
80° F (27° C)
130° F (54° C)
Flow Capacities – GPM (L/Min)
Model Min*
S59-2045
S59-2080
* Recirculation system only (See diagram on Page 2). When properly installed near
the hot water source with a continuously operating recirculation pump, the valve will
maintain set temperature with a .5 GPM (2.0 L/Min) draw from the plumbing system.
Flow
5.0
(18.9)
8.0
(30.3)
5
(.5)
12.0
(60.0)
24.0
(116.0)
Pressure Drop – PSI (Bar)
10
15
(1.0)
(1.5)
17.0
21.0
(91.0)
(115.0)
34.0
44.0
(166.0)
(206.0)
20
(2.0)
25.0
(135.0)
48.0
(234.0)
30
(2.5)
31.0
(153.0)
60.0
(267.0)
45
(3.0)
37.0
(170.0)
74.0
(296.0)
Code Compliance and Certifications
ASSE 1017 & cUPC certified.
U
P
C
Certified to
NSF/ANSI 372
Standard product selections contained within this document are third party
CERTIFIED to NSF/ANSI 372 meeting the Lead-Free content requirement.
Any product configured with custom options will be COMPLIANT with NSF/
ANSI 372 meeting the Lead-Free content requirement.
Engineer's Approval___________________________
60
(4.0)
42.0
(200.0)
85.0
(343.0)
Models (Must select one)
Model Description
¨S59-2045
¨S59-2080
TMV45-Thermostatic Mixing Valve
TMV80-Thermostatic Mixing Valve
Optional Selections
Finish
¨C
Thermostat
¨L
¨H
Thermometer
¨T
Bracket
¨B
Piped Assembly
¨P
Cabinets
¨N
¨SS
¨RS
¨SE
¨RE
¨W
Chrome Plated
Low Range Thermostat
High Range Thermostat
Dial Thermometer
Wall Mounting Bracket
Piped Assembly with Inlet and Outlet Shutoff
Piping Assembly with Outlet Shutoff
Surface Mount Stainless Steel
Recessed Stainless Steel
Surface Mount White Enamel
Recessed White Enamel
Plexi-glass Window in Door
Sample Specification
Thermostatic water mixing valve shall consist of liquid-filled motor and a piston control
mechanism with positive shutoff of hot water when cold water supply is lost. All flow is
shut off in the event of thermostat failure. Construction shall be bronze body and cap
with replaceable corrosion resistant components, including stainless steel piston and
liner. Valve shall come equipped with integral checkstops and removable strainers.
Page 1 of 6 8/6/2015
This information is subject to change without notice.
Bradley_TMV_Standard_TMV45_80
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
© 2015 Bradley
bradleycorp.com
Recirculation Diagram
Check Valve (Typ)
TMV45 & TMV80
Standard Thermostatic Mixing Valves
Tempered Water Flow
Cold
Cold Water
Heat Trap
28" Drop
Alternate
Recirculation
(More than 5 GPM)
Water
Heater
Hot
Storage
Tank
Dimensions – Inches (mm)
Model A B C D E
S59-2045
S59-2080
Model F G H X
S59-2045
S59-2080
7 (178) 2 (51) 3-1/4 (84) 4-3/4 (119) 8 (203)
8-3/4 (224) 2-1/2 (64) 3-1/2 (89) 5-1/4 (135) 12-1/4 (312)
NPT
NPT
Y
14 (356) 3-1/8 (79) 9-1/4 (234) 3/4 1 3/4
19 (483) 3-5/8 (91) 11-3/8 (290) 1 1-1/4 3/4
Check Valve
Temperature
Switch
Recirculated
Tempered Water
Return
Flow
Balancing
Valve (Typ)
Recirculating Pump
NPT
NPT
NPT
Z
Y
B
Z
F
Min.
D
C
E
Page 2 of 6 8/6/2015
This information is subject to change without notice.
Bradley_TMV_Standard_TMV45_80
NPT
X
A
NPT
X
H
G
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
© 2015 Bradley
bradleycorp.com