Combination Drench Shower and Eye/Face Wash Unit
•
Exceeds American National Standard Z358.1 Specifications
•
Corosion-Resistant PVC Construction with All-Stainless Steel Valve Fittings
•
Combination Units may be Top-Supplied or Mid-Supplied
•
Universal Identification Sign and Inspection Tag Included
•
Full, One-Year Warranty
•
SpinTec™ showerheads are covered by one or more of the following patents: 8113446;
D594,089; D669,555; Reg. Comm. Des. D001079560-0001. Other patents pending.
• Classified by Underwriters Laboratory Inc. to ANSI Z358.1
Specifications
Combination Drench Shower and Eye/Face Wash Unit saves space and is durable for highly
corrosive work environments. Shower valve operates quickly by a pull rod with a triangular
handle. Shower provides a superior washdown with a more even spray pattern. Eye/face wash
is operated by a highly visible push handle Safe, steady water flow under varying water supply
conditions from 30–90 PSI is assured by integral flow control in the sprayhead assembly.
NOTE: The ANSI Z358.1 standard requires an uninterruptible supply of flushing fluid at a
minimum 30 PSI flowing pressure. Eye/face wash sprayheads contain an antimicrobial agent to
protect the sprayheads.
This plumbing fixture is not intended to dispense water for human
consumption through drinking or for preparation of food or beverages.
Model Description
S19-310PVC Combination Drench Shower and Eye/Face Wash Unit
S45-620 Optional Foot Treadle Kit for Hand or Foot Operation (sold separately)
S19-2200 Navigator EFX60 - Emergency Thermostatic Mixing Valve
S19-310PVC
®
Recommended Option:
Navigator S19-2200 EFX60
Emergency Thermostatic Mixing Valve
Satisfies ANSI Z358.1
tepid water requirements.
Page 1 of 3 1/29/2014
This information is subject to change without notice.
Bradley_SafetyCombi_S19-310PVC
P.O. Box 309, Menomonee Falls, WI 53052-0309
© 2015 Bradley
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
S19-310PVC
Combination Drench Shower and Eye/Face Wash Unit
Standard Equipment
SpinTec™ Showerhead
3.1" (78.7mm) diameter highly visible yellow impact-resistant plastic. SpinTec drench
showerhead features integral 22 GPM flow control, conserving water and helping to
accurately size your tepid water system.
SpinTec Flow Rate vs Inlet Pressure at Fixture
40
35
30
25
20
15
Flow Rate (gpm)
10
5
0
10 20 30 40 50 60 70 80 90
Inlet pressure at Fixture (psig)
Shower Valve
Stainless Steel 1" NPT stay-open ball valve. Operated by a stainless steel pull rod with
triangular handle.
Eyewash Bowl
10" (254mm) diameter yellow impact-resistant plastic.
Eyewash Sprayhead Assembly
Twin perforated-disc eye/face wash heads with protective pop-off sprayhead covers.
Safe, steady water flow under varying water supply conditions from 30–90 PSI is assured
by integral flow control in the sprayhead assembly.
Eyewash Valve
Stainless Steel ½" NPT stay-open valve. Hand operated by a large, highly visible safety
yellow PVC push handle.
Pipe and Fittings
Heavy wall 2" schedule 80, corrosion-resistant PVC piping with 2" socket-welded supply
joint The base is a 6" diameter floor flange.
Water Supply
2" PVC Slip.
Local codes may require the installation of a backflow prevention valve to
complete proper installation. Compliance with local codes is the responsibility
of the installer. Valve must be tested annually to verify that it is functioning
properly. Backflow prevention valves are not included with the fixture and may be
supplied by the contractor or purchased from Bradley Corporation.
Page 2 of 3 1/29/2014
This information is subject to change without notice.
Bradley_SafetyCombi_S19-310PVC
P.O. Box 309, Menomonee Falls, WI 53052-0309
© 2015 Bradley
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
Loading...