BOXLIGHT ProColor Touch Table 470 User Manual
ProColor Touch Table
User Guide
mimio.boxlight.com
Version 1.1
Contents
1. Important safety Instructions…….………………………………………………….3
1.1 Safety precautions
1.2 Care and maintenance
2. Introduction……….…………………………………………………………………..7
3. Each description………………………………………………………………….….8
4. Remote control………….…………………………………………………………….10
5. When using OPS PC CAUTION…..………………………………………………...11
6. OSD menu description…………..…………………………………………………...12
7. Product specification…………………………………………………………………20
8. Product dimensions…………………………………………………………………..22
9. Troubleshooting…………….…………………………………………………………24
9.1 Product self-Diagnosis
9.2 Before Requesting service
10. Customer support and AS guide…..………………………………………………25
10.1 Before Request AS
2
Version 1.1
1. Important Safety Instructions
Icons used for safety precautions
ICON NAMEN MEANING
Warning Failing to follow the precautions marked with this sign may result in a serious injury or
even a fatality.
Caution Failing to follow the precautions marked with this sign may result in a personal injury or
property damage.
After products wrapping paper out , Grasp the upper handle as shown in the image, Go to the bottom bezel.
The Product must be taken to erect and maintain a horizontal product is stable.
When put up product the bottom, edge of the portion of product do not.
1.1 Safety Precautions
Note
The color and appearance of the product may vary depending on the model, and the product specifications are subject to change
without prior notice for reasons of performance enhancement.
1.1.1 Power Related
Warning
1.1.1 Avoid using a damaged power cord or plug or a loose power outlet.
» Otherwise, it may result in electric shock or fire.
1.1.2 Avoid connecting multiple electric appliances to a single wall outlet.
» Otherwise, it may result in fire due to overheating of the wall outlet.
1.1.3 Avoid plugging in or unplugging the power supply with wet hands.
» Otherwise, it may result in electric shock.
1.1.4 Plug the power plug in firmly.
» Otherwise, it may result in fire.
1.1.5 Make sure to connect the power cord to a grounded wall outlet(for insulation class 1 equipment only).
» Otherwise, it may result in electric shock or injury.
1.1.6 Avoid bending or twisting the power cord excessively and avoid placing heavy objects on the cord.
» Otherwise, it may result in electric shock or fire due to a damaged power cord.
1.1.7 Keep the power cord and the product away from a heater.
» Otherwise, it may result in electric shock or fire.
1.1.8 If the pins of the power plug or the wall outlet are covered in dust, clean it using a dry cloth.
» Otherwise, it may result in fire.
Caution
1.1.9 Avoid unplugging the power plug while the product is operating.
» Otherwise, it may damage the product due to electric shock.
1.1.10 Make sure to use only the power cord supplied by our company. In addition, do not use the power cord of another
electric appliance.
» Otherwise, it may result in electric shock or fire.
1.1.11 When unplugging the power plug from the wall outlet, make sure to hold it by the plug and not by the core.
» Otherwise, it may result in electric shock or fire.
1.1.12 Connect the power plug to a wall outlet that can be easily reached.
» When a problem occurs with the product, you must unplug the power plug to cut the power off completely.
You cannot cut the power off completely using only the power button on the product.
3
Version 1.1
1.2 Installation Related
Warning
1.2.1 Avoid placing vurning candles, mosquitorepellentor cigarettes on the product.
» Otherwise, it may result in fire
1.2.2 Keep the plastic bags used to pack the product away from children.
» If children place the plastic bags over their heads, they may suffocate.
1.2.3 Avoid installing the product in a location exposed to dust, moisture(sauna), oil, ssmoke or water(rain drops)and installing
it within a vehicle,.
» This may result in electric shock or fire.
1.2.4 Avoid installing the product in a location exposed to direct sunlight and installing the product near a heat source such as
a fireplace or heater.
» This may shorten the product life cydle or cause fire..
Caution
1.2.5 Do not let the product drop while moving it.
» This may result in a problem with the product or injury.
1.2.6 Do not place the product face down on the floor.
» This may damage the panel of the product.
1.2.7 When putting the product down, handle it gently.
» Otherwise, it may result in a problem with the product or injury.
1.2.8 If the product is installed in a location where the operating conditions vary considerably, a serious quality problem may
occur due to the surrounding environment. In this case, install the product only after consulting one of our service engineers
about the matter.
» Places exposed to microscopic dust, chemicals, too high or low temperature, high humidity, airports or stations where
the product is continuously used.
1.3 Cleaning Related
Warning
1.3.1 Before cleaning the product, unplug the power cord.
» Otherwise, it may result in electric shock or fire.
1.3.2 When cleaning the product, do not spray water directly over the product parts.
» Make sure that water does not enter the product.
» Otherwise, it may result in fire, electric shock or a problem with the product.
Caution
1.3.3 Avoid spraying cleansing agent directly onto the product.
» This may result in discoloration or cracking of the exterior of the product or the panel coming off.
1.3.4 When cleaning the product, disconnect the power cord and clean the product with the supplide cleaning cloth.
» Avoid using chemicals such as wax, benzene, alcohol, thinner, mosquitorepellent, fragrance, lubrication or cleansing
agent when cleaning the product, This may result in the exterior being deformed or the print being removed.
1.3.5 If you can't get the product clean with just the supplied cloth, use a soft, damp cloth with a "monitor-exclusive cleansing
agent" and wipe the product with it.
» If no moitor-exclusive cleansing agent is available, dilute a cleansing agent with water at a ratio of 1:10 before cleaning
the product.
1.3.6 Since the exterior of the product is easily sdratched, be sure to use the supplied cleansing cloth.
4
Version 1.1
1.4 Usage Related
Warning
1.4.1 Since a high voltage runs through the product, never disassemble, repair or modify the product yourself.
» Otherwise, it may result in fire or electric shock.
» If the product needs to be fixed, contact a service centre.
1.4.2 To move the product, turn the power off and unplug the power cord, the antenna cable and any other wires connected to
the product
» Otherwise, it may result in electric shock or fire due to the damaged power cord.
1.4.3 If the product generates a strange noise, a buming smell, or smoke, unplug the power plug immediately and contact a
service centre.
» Otherwise, it may result in electric shock or fire,
1.4.4 Avoid letting children hang or climb onto the product.
» Otherwise, it may result in the product falling and this may result in injury or death.
1.4.5 If you drop the product or the case is damaged, turn the power off and unplug the power cord. Contact a service centre.
» Otherwise, it may result in fire or electric shock.
1.4.6 Avoid placing objects such as toys and cookies on top of the product.
» If a dhild hangs over the product to grab an object, the object or the product may fall and this may result in injury or
even death.
1.4.7 When thunder or lighting occurs, unplug the power cord and under no circumstance touch the antenna cable as this is
dangerous
» Otherwise, it may result in electric shock or fire,
1.4.8 Avoid dropping an object over the product or cause impact to the product.
» Otherwise, it may result in electric shock or fire.
1.4.9 Avoid moving the product by pulling the power cord or antenna cable.
» Otherwise, it may result in electric shock, fire or a problem with the product due to damage to the cable.
1.4.10 When a gas leak occurs, do not touch the product or the power plug and ventilate immediately.
» A spark may result inan explosion or fire.
» During a thunder or lighting storm, do not touch the power cord or antenna cable.
1.4.11 Avoid lifting up or moving the product by holding only the power cord or signal cable.
» Otherwise, it may result in electric shock, fire or a problem with the product due to damage to the cable.
1.4.12 Avoid using or placing inflammable spray or objects into the product(the vents, ports, etc)
» If water or substances enters the product, turn the power off, unplug the power cord and contact a service centre.
» Otherwise, it may result in a problem with the product, electric shock or fire.
1.4.13 Avoid placing a liquid container such as a vase, flowerpot, beverage, cosmetics or drugs, or a metal object over the
product.
» If water or substances enter the product, tum the power off, unplug the power cord and contact a service centre.
» Otherwise, it may result in a problem with the product, electric shock or fire.
Caution
1.4.15 When not using the product for a long time such as leaving your home, unplug the power cord from the wall outlet.
» Otherwise, it may cause dust accumulation and result in fire caused by overheating or short circuit or result in an
electric shock.
1.4.16 Set the appropriate resolution and frequency for the product.
» Otherwise, it may result in eye strain.
1.4.18 Do not place the adapter on top of another adapter.
» Otherwise, it may result in fire.
1.4.19 Keep power adaptor away from any other heat source.
» Otherwise, it may result in fire.
5
Version 1.1
1.4.20 Remove the vinyl cover of the adapter before using the adaptor.
» Otherwise, it may result in fire.
1.4.21 Always keep power adaptor in well-ventilated area.
1.4.22 Be careful that adaptor should not be in contact with water and therefore not be wet.
» This may cause a malfunction, electric shock or fire. Do not use adaptor by the waterside or outside particularly when
it rains or snows.Be careful that adaptor should not be wet while cleaning floor with water.
1.4.23 Watching the product from too close a distance continuously may damage your eyesight.
1.4.24 Avoid using a humidifier or cooker near the product.
» Otherwise, it may result in electric shock or fire.
1.4.25 It is important to give your eyes some rest(5 minutes every hour) when viewing the product screen for long periods of
time.
» This will alleviate any eye strain.
1.4.26 Since the display panel is hot after using it for a long time, do not touch the product.
1.4.27 Keep the small accessories in a location out of the reach of children.
1.4.28 Avoid placing a heavy obhect over the product
» Otherwise, it may result in a problem with the product or injury.
1.4.29 When using headphones or earphones, do not turn the volume too high.
» Having the sound too loud may damage your hearing.
1.4.30 Be carefu that children do not place the batteries in their mouths when removed from the romote control. Place the
battery in a location that children or infants cannot reach.
» If children have had the battery in their mouths, consult your doctor immediately.
1.4.31 When replacing the batteries, insert them with right polarity(+, -).
» Otherwise, the battery may become damaged or it may cause fire, personal injury or damage due to leakage of the
internal liquid.
1.4.32 Use only specified standard batteries. Do not use new and used batteries together.
» This may cause a battery to break or leak and may cause ifre, injury, or contamination(damage).
1.4.33 The batteries(and rechargeable batteries) are not ordinary refuse and must be retumed for recycling purposes. The
customer is responsible for returning the used or rechargeable batteries for recycling.
» The customer can return used or rechargeable batteries to a nearby public recycling centre or to a store selling the
same type of the battery or rechargeable battery.
Products at the same time holding the products when building or product, do not hold the back of the handle. under
the product makes. the handle is a secondary role.
Table stand and put them on the table by using the installation gets the nose does not necessarily prevent a fall on
the floor using the screws fixed.
Attention: In order to reduce the risk of electric shock.
Do not open the cover or back cover. If you have a product or service, please request our customer
support center
6
Version 1.1
2. Introduction
2-1. Package Contents
∙ Unpack the product and check if all of the following contents have been included.
∙ Store the packaging box in case you need to move the product later.
∙ If any items are missing, contact your dealer.
∙ Contact a local dealer to purchase optional items.
Table
C
ontents
User Manual
Cable
RGB Cable HDMI Cable
Accessory
Remote Control Batteries(CR-2025 x 1)
7
Version 1.1
3. Each description
1. SPEAKER Out L. ( 10W , 8 Ohm ) 11, USB for Touch
2. SPEAKER Out R. ( 10W , 8 Ohm )
12. USB for Touch(Option)
3. AUDIO LINE Out
13. AC Power In. (100V ~ 240V, 50/60Hz)
4. PC AUDIO Input
5. PC RGB Input
6. DISPLAY PORT Input
7. HDMI 3 Input
8. HDMI 2 Input
9. HDMI 1 Input
10. RS232C
PC Connection
1. Connect RGB cable to RGB, Voice connection will be connected to PC AUDIO IN with stereo cable.
2. HDMI cable will be connected to (display and voice are available at the same time)
3. External speaker will be connected to R , L input with using Ø3.5 stereo cable and
then connect same as below drawing. L, R connection is same. Internal speaker will not output.
Note) Don’t connect NC
8
Loading...